How to copy from DVD

Hi.
I have a dvd which contain my friend's wedding movies. The problem is that everytime I played it on the DVD player, it gets stuck and said 'skipping damaged area'. But when I played on an actual player on the tv, everything's fine. Recently my friend asked me to edit the video so I wanted to copy the files to my hd.
But it has two different files, Audio_TS and Video_TS. In the audio file, there's no sub-files. I've tried copying both of the files but it doesn't work. And I've tried ripping it by using iSkysoft DVD Ripper, but when it's finished, the audio's missing.
How can I solve this matter? I would really appreciate the help.

Welcome to the forums!
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

Similar Messages

How to copy from in linux??

i've just installed linux. trying to install packages
ftp://ftp.archlinux.org/core/os/i686/core.db.tar.gz
ftp://ftp.archlinux.org/extra/os/i686/extra.db.tar.gz
ftp://ftp.archlinux.org/community/os/i6 … .db.tar.gz
so that i can install xkfe offline as no internet connection at the mo. i have the packages on cd. put it into the linux desktop.
now just stumped onto how to copy from the cdrom drive to the destinations. im not sure where exactly to find the cdrom in the first place.
so if someone can help me with the phrase to put in to do the copy so that i can then run pacman and install these and an environment.

Your cd drive might be /dev/sr0 or /dev/sr1 or /dev/cdrom or something, you would make a folder in /mnt or /media with mkdir and mount it there via mount /dev/whatever /mnt/whatever. You just cd /mnt/whatever and then use cp on files to move them over wherever you want. "cd" = change directory.
I don't mean to be rude, but there aren't many people who can (or should try to) pull off using Arch as their first linux distribution. It is intended for people who are already well aware of what they are doing. Perhaps you should start with Ubuntu, Fedora, Suse, Mandriva, or something of the sort. Ubuntu being the most popular choice, for whatever that means..
That said, there are many on the forums who started here first and are doing fine, so "shrug". It's really about attitude, willingness to work for it (looking thoroughly for your answers before asking, especially), and willingness to learn really. Just a word of advice..
On that note, mounting cd's I'm sure is written all over google, and these forums tend to either ignore or bitch at people who haven't already looked for their question thoroughly on such, with good reason.
Also, please see the forum etiquette http://wiki.archlinux.org/index.php/Forum_Etiquette here. It's not okay to bump your posts so quickly. There is an edit button there for a reason.
Also, why did you link to those 3 database files? db.tar.gz files do not contain actual packages, just information about them.. you would need to download a bunch of xfce packages.. db.tar.gz files wont help you. I don't see how they relate to the rest of your post, either..
Good luck..
Last edited by FrozenFox (2009-06-20 17:55:15)

P55GD80 slowdown when copying from DVD SATA drive.

I had an issue with my system becoming unresponsive after copying files from a DVD drive to my secondary data drive. I have the specs below:
P55GD80 (Bios 1.5)
Core i7-860
Intel X-25M 80GB SSD (Boot Drive)
Seagate 7200.10 320GB (Data Drive)
DVD-ROM
DVD-RW
4 GB Gskill memory
Windows 7 Ultimate 64bit.
My initial setup had all of the drives on the Intel SATA 1-6 connections. I first noticed an issue when copying files from either of the DVD drives to my secondary data drive. My whole system would slow to a crawl. After many different combinations, I found the best performance by moving my secondary data drive to the SATA 7/8 Jmicron controller. It does not make sense why I needed to do this. Any ideas? I did not notice an issue when copying from the SSD to the data drive, but then again, I rarely do that.
Do I need to enable AHCI for the Intel controller? If so, how do I do that. When I went into the BIOS there only seemed to be an option for this for the Jmicron controller. When I enabled this, the system suddenly did not see any other drive besides the one connected to the Sata 7/8.
Also, why when I hook up the two DVD drives to SATA 7/8 (JMicron) will the BIOS see both drives, but Windows 7 sees only 1? Does JMicron only operate in RAID?

Thanks guys, I figured it out. I had two problems really. When I went to turn on AHCI the first time, I already had my secondary data drive connected to the SATA 7/8 port, which messed everything up and made me think I wasn't turning AHCI on for the right controller. Turns out I was, but I had to move all of my drives back to the Intel SATA 1 through 6 ports. Once I did that, everything was detected properly, but then my second problem was needing that registry key change which I had no idea was necessary. I would like to think I am pretty technical, but I am obviously a noob to system building since I had never heard of AHCI.

How install PE10 from DVD

My hp laptop came with PSE10 and PE10 installed , but no disks. Everything worked fine except PE would not access Smartsound Quicktracks. hp then sent me individual install DVDs for PSE10 and PE10. I uninstalled PE10 and tried to reinstall from DVDs, It hangs up and I never get the exe file to start install. I know the disc is good since it comes up ok on my desktop. I thought perhaps the problem was that the original package was a combined PSE10/PE10. So I uninstalled PSE10 and reinstalled it successfully from the DVD. Still cannot install PE10 starting with disk 2. If I load disk 1 it correctly tells me to close and start with disk 2.
Any help would be appreciated.
Dave

Welcome to the forum.
This is a general Adobe program install ARTICLE, but might be helpful. Most of the tips are for when things progress beyond where you are hanging up.
For what you describe, I woud Copy your PrE DVD to a folder on one of your internal HDD's. Then, try to install from there, rather than from the DVD.
Please report how that works.
Good luck,
Hunt

Copying from dvd to hard drive. processs freezes

copying a MP4 from dvd to hard drive. 95% complete then frozen. unable to stop download, or eject dvd. what now?

Open Activity Monitor in Utilities, highlight Finder & Force Quit it, it'll reastart Finder.

How to Copy from Billing document F2 to Credit or Debit memo?

Hello,
I know the Menu path for copy control of billing document to billing document which is as follows
SPROIMG-Sales and Distribution-BillingBilling Documents-Maintain Copy Control of Billing document--Copy COntrol: Billing Document to Billing Document where I give the Source and the target.
Now I have a scenarion where F2 invoice has ForTrade/Customs information in the Header of F2 invoice which can be viewd through VF03->Header->ForTrade/Customs tab.
Now that inforamtion has to be transferred to CR/DR which is now not being copied although I have set the copy controls between the billing document.
So, can anyone help me by providing the information for the following questions?
1.How will I acheive the copy of Foreign trade to CR/DR from F2?
2. When I copy from F2 to CR/DR, which all information from F2 will be copied to CR/DR?
Thanks for the help.
Anupama Rao

Anupama,
The foreign trade data is copied from delivery to billing and any order doesn't contains the foreign trade data and when you create a credit memo request CR by copying F2 invoice the foreign trade data is not copied to CR and when you create a G2 invoice from CR the foreign trade data is not copied because it doesn't exists
the optimal solution for this is to keep the incompletion for foreign trade in the G2 and L2 inovices
Regards,
Santosh

How to boot from DVD & how to force eject DVD

Hi,
Just installed a new HD on my MBP. I inserted the leopard DVD and it was spinning for about 2 minutes and then nothing happned. Just black screen. Now I tried starting holding the C key down. Nothing. I tried starting holding the eject button down, no eject of the DVD. I tried holding the button below the tracklpad down, no eject of the DVD.
How to boot from a DVD?
How to force eject DVD?
What am I doing wrong?

I hope you get an answer to this as I'm sturggling to
A) start my computer as it just goes to a grey screen
B) Force Eject a DVD
Someone suggested the below on another thread, it didn't work for me but maybe it will work for you.
http://discussions.apple.com/thread.jspa?messageID=5869652#5869652
Re: Stuck on Grey Screen.. Won't Boot
Posted: Nov 16, 2007 1:34 PM in response to: aliray10 Reply Email
(I don't have my (no-longer booting) iBook in front of me to check this, but I think this is what I did last night....)
Boot single user -- hold down "cmd-S" immediately after you turn the computer on.
"diskutil list" will give you a list of your disks. My CD drive was disk1.
"diskutil eject disk" should eject the target disk.

HT201302 How to copy from Facebook

How to copy photos from Facebook

You sync it with itunes on your computer with your phone attache or a wireless sync. You need to check whether the video format is supported by the phone

How to reboot from dvd

how to reboot from my snow leopard dvd?

Insert the DVD
Restart computer
Once the computer reboots, as soon as you see the grey boot screen, hold the OPTION button.
You will get then get you boot options, select the DVD.

Need Help - how to copy from ipod to new computer - old computer crashed

My ipod nano was on a computer that crashed and will not restart. I now have a new computer and would like to know how to copy the music on my ipod to the new computer.
Can someone please tell me how to do this? Thanks
ipod nano Windows XP Pro

Have a read the following
http://discussions.apple.com/thread.jspa?threadID=434429&tstart=75

How to Copy a DVD on HP TouchSmart 300 desktop

I have a HP TouchSmart300 desktop. Is there a program that comes with the computer that will copy a DVD. Not trying to copy a protected DVD. I am use to using Roxio and Nero on my old laptop, but have not had success trying to do this on this new computer. Would appreciate help. cm
This question was solved.
View Solution.

Hi,
Here's one method you could use.
Download and install the free software ImgBurn.
The easiest way to then copy a DVD to a blank DVD is as follows.
1. Create a Disc Image file of the DVD you wish to copy on your PC - a guide to doing this is Here.
2. Write this Disc Image to your blank DVD - a guide to this is Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to copy from one Version to Another version with single click

Hi Everone,
Users wants to copy from one version to another version with single click only. I.e Actuals to Planning etc.,
They don't want use standard COPY Data manager package to do this activity as this involves many steps.
Please let me know Is there any way to COPY with single click. Thanks in advance!!
Regards,
Viswanath

Hi Viswanath,
Use /CPMB/DEFAULT_FORMULAS
Then edit automatically created advanced script:
PROMPT(SELECTINPUT,,,,"%CATEGORY_DIM%,%CURRENCY_DIM%,%TIME_DIM%")
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SELECTION,%SELECTION%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,DEFAULT.LGF)
Remove bold lines and change the script name in line with your script name:
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SUSER,%USER%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPPSET,%APPSET%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,SAPP,%APP%)
TASK(/CPMB/DEFAULT_FORMULAS_LOGIC,LOGICFILENAME,YOURLOGICNAME.LGF)
Vadim

How to copy a dvd disc on mac?

I am fairly new to the Apple world - I am trying to copy a dvd of old family home movies that was put unto a dvd, but unable to copy the files such that I can open the dvd copy. Is there mac software on my computer that copies dads??

Click here and follow the instructions. They'll work with any home video DVD but not most commercial ones.
(116267)

How to copy to DVD disk

I have searched through the forums, read many other related posts related to this subject, and studied the manuals and tutorials, however I have not been able to figure out how to do the basic DVD burning. I apologize if this seems to be a simple task to many of you.
I would like to copy You Tube videos to DVD. These are instructional videos, such as how to make sushi, and the like. I'd like to record various episodes on disks and categorize the contents, so I would have them readily available.
I would also like to copy my bookmark menu to DVD.
Basically, I just want to know how to burn DVD disks for various purposes.
I have a iMac, Snow Leopard OS, and have DVD-R.
Thanks for your help.
Ted

I would like to copy You Tube videos to DVD. These are instructional videos, such as how to make sushi, and the like. I'd like to record various episodes on disks and categorize the contents, so I would have them readily available.
For your information, please read this excerpt of Youtube's Terms of Use:
5. Your Use of Content
In addition to the general restrictions above, the following restrictions and conditions apply specifically to your use of Content.
The Content on the Service, and the trademarks, service marks and logos ("Marks") on the Service, are owned by or licensed to YouTube, subject to copyright and other intellectual property rights under the law.
Content is provided to you AS IS. You may access Content for your information and personal use solely as intended through the provided functionality of the Service and as permitted under these Terms of Service. You shall not download any Content unless you see a “download” or similar link displayed by YouTube on the Service for that Content. You shall not copy, reproduce, distribute, transmit, broadcast, display, sell, license, or otherwise exploit any Content for any other purposes without the prior written consent of YouTube or the respective licensors of the Content. YouTube and its licensors reserve all rights not expressly granted in and to the Service and the Content.
You agree not to circumvent, disable or otherwise interfere with security-related features of the Service or features that prevent or restrict use or copying of any Content or enforce limitations on use of the Service or the Content therein.
Aside from Youtube, it will depend on what you want to burn; data is easily done in Finder or Disk Utility; however, homemade videos need to be rendered (put into a format that will be playable on any DVD player or computer) before they can be burned (with iPhoto, iMovie, and/or iDVD).

How to copy from an external hard drive collection to a folder on your mac?

I put 2000 images from my honeymoon on an external hard drive. I flag my favorites and work on 7 images i layter but in an collection. I am really proud of this 7 images and want to put them in my portfolio map on my laptop. BUT that seems to be impossible! I have the choice to move the files from the external hard drive or make a virtual copy! I want them in bout my external hard drive and laptop! This is turning out to be a mess. What to do now? And how to prevent this in the future?
What is the best way to manage and storage images?
If I only could copy an collection! SO FRUSTRATING.
Please help me

I am really proud of this 7 images and want to put them in my portfolio map on my laptop.
In Lightroom, select the 7 images, then use File->Export, and make sure the exported photos wind up in the desired location.
What is the best way to manage and storage images?
I would manage the photos inside of Lightroom using keywords, captions, flags, star ratings and any other Lightroom organizational tool that seems appropriate. I would then use Lightroom as the mechanism for searching for and locating and displaying whatever photos you are interested in finding. If you need copies of the photos for non-Lightroom use, as in your example of 7 images, then use File->Export.

How to copy from DVD

Similar Messages

Maybe you are looking for