How to copy line item details in Service PO from service contract

Hi Team,
i am using service contract with account assignment U and when i am creating a PO with reference of contract then in PO at Item Overview is coming data ok, but at item details in services there is not picking data automatically from contract.
whats wrong in my scenario.

Hi,
Please make sure that you follow the following steps:
1. Enter the contract and item number in the PO item line
2. Click on the u201CService Selu201D icon to select the required
services from the contract
3. In the Pop-up screen, enter the agreement number in the
corresponding field.
4. Now select the required services from the contract and
use the u201CServicesu201D icon or  the F9 key. Now save the purchase
order with the adopted lines
Best Regards,
Arminda Jack

Similar Messages

  • How to copy line items from one expense report to the next

    I travel to the same project/destination every week so in PR05, I was able to just copy the previous expense report for the new week and edit the expense values. Now, when I book travel, the air line booking starts a new expense report entry.
    Is there a way to copy the employee-paid expenses to the GetThere-generated trip entry expense report, i.e. just copy the line items from one expense report to another that already exists. I guess that would be a merge function.

    Hi Tom,
    Here are two alternative solutions:
    Alternative 1:
    If you copy the expense report before you book the services (flight, hotel …)
    in GetThere, then the airline or hotel bookings will not start a new expense
    report but will be assigned to the copied expense report.
    Alternative 2:
    This alternative is a bit laborious.
    Shift the start date and end date of the expense
    report  that was automatically created by
    your flight booking for next week (e.g. Calendar Week (CW)  47) to the week after next week (e.g. CW 48).
    Copy the expense report of the previous week (e.g.
    46)
    Afterwards open the expense report that you
    moved to CW 48 and click on the tab strip itinerary
    Now assign the bookings (flight, hotel …) to the
    expense report of CW 47 by clicking on the button assign to existing trip
    Later delete the expense report in CW 48
    Get back to me if you have any questions concerning the alternatives outlined
    above.
    Note:
    These solution alternatives are only available for customes using HTML5 UIs.

  • FI drilldown reports- cant get Line item details in dynamic selection

    Hi,
    In FI drill down reports line item analysis, i create form in FDI4.I get document currency as a key figure.
    While executing a report in tcode FDI0. i gave company code,dealer and currency as 'EUR' in dynamic selection,.
    the correct output value '1245678.98' also displaying ,but i am not able to get line item details for the value '1245678.98'.
    the path to get line items is Extras-->Line items.
    it shows message as 'The value for characteristic Currency is not unique. Reposition the cursor'.
    how to display line item details.
    plz help.

    Hi,
    You can get this functionality with Virtual Key figures.
    You will have the complete dataset in the RSR00002 Enhancement in CMOD.
    Thank you
    Arun

  • Exit / badi for individual service line item detail with internal orders.

    Hello guys,
    <b>Issue 1.</b>as per our scenario we want to get the individual service line item details with Internal Orders.
    Please provide me any exit/badi with each item level with individual service line item Internal Orders.
    <b>Issue 2:</b> Remain same for issue 3 for blocking status. We want to delete item level for particular line what about the service rows which assigned in particular item.
    point will be rewarded for the suitabel answers.
    please give me response  ASAP.
    With Regards
    yogesh

    Hey Yogesh,
    I have the same scenario... Could you please drop a mail to [email protected] with the details of BADI and other details that you implemted for the same.
    Thanks a lot in advance.

  • Copying g/l balance and line items details

    What is the best way to copy  account balance and the line item details from one G/L account to another one.
    Thanks

    Hi
    The best way to upload GL open items and GL balance is via FB01.
    Good Luck
    Hari

  • How to copy List item from one list to another using SPD workflow using HTTP call web service

    Hi,
    How to copy List item from one list to another using SPD workflow using HTTP call web service.
    Both the Lists are in different Web applications.
    Regards, Shreyas R S

    Hi Shreyas,
    From your post, it seems that you are using SharePoint 2013 workflow platform in SPD.
    If that is the case, we can use Call HTTP web service action to get the item data, but we cannot use Call HTTP web service to create a new item in the list in another web application with these data.
    As my test, we would get Unauthorized error when using Call HTTP web service action to create a new item in a list in another web application.
    So I recommend to achieve this goal programmatically.
    More references:
    https://msdn.microsoft.com/en-us/library/office/jj164022.aspx
    https://msdn.microsoft.com/en-us/library/office/dn292552.aspx?f=255&MSPPError=-2147217396
    Thanks,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

    Hi friends,
    Please provide some valuable inputs for the following scenario:
    When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
    Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
    P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
    Thanks,
    Sandeep
    Message was edited by: sandeep

    Sandeep,
    Yes, that was my original interpretation.  I was having a hard time believing that someone would ask such a question. 
    I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
    I do not provide advice in these forums about details of enhanced solutions.  Perhaps one of the other members will be more willing to do your work for you.
    Best Regards,
    DB49

  • SAP Note 1486147 - TDS line item details not flowing in Form 16 A Samrtform

    1.     Old Form 16 certificate is printed before 01.04.2010 and new certificate after 01.04.2010. (its correct SAP has written code in such a manner Old one is SAP script and new on is Smartform.)
    Old FORM 16 A gets Acknowledgement No details correctly.
    2.     Acknowledgment No details are not flowing in the NEW Smart Form of Form 16 A.
    When I debug the program I can see PARTNER No details are copied in PAN NO field in TABLE : IT_LFA11[]
    BUT PARTNER NO details are copied to PARTNERNO field  in TABLE IT_LAFA1[].
    TDS line item details on Smart Form is printed based on Partner no. here partner no. is blank as IT_LFA11 table is passed to smartform..
    Program name : J_1IEWT_CERT
    Include name : J_1IEWT_CERT_F01.
    Code:
    FORM CALL_FORM .
      DATA: h_formname TYPE tdsfname,
              h_fmname TYPE rs38l_fnam,
              h_output_info  TYPE  ssfcrescl,
              h_spoolids TYPE LINE OF ssfcrescl-spoolids,
              h_output_options TYPE ssfcompop,
               spoolno(10) TYPE c.
      DATA : it_lfa11 TYPE STANDARD TABLE OF J_1I_LFA1 INITIAL SIZE 0,
             it_printtab TYPE STANDARD TABLE OF J_1I_PRINTTAB INITIAL SIZE 0,
             it_deduc TYPE STANDARD TABLE OF J_1I_DEDUCTEE INITIAL SIZE 0,
             it_qrtrtab TYPE STANDARD TABLE OF J_1I_QRTRTAB INITIAL SIZE 0,
             it_challan TYPE STANDARD TABLE OF J_1I_CHALLANDETAB INITIAL SIZE 0.
      SORT challandetab BY j_1iextchdt DESCENDING.
      it_lfa11[] = it_lfa1[].
      it_printtab[] = printtab[].
      it_deduc[] = it_deductor[].
      it_qrtrtab[] = qrtrtab[].
      it_challan[] = challandetab[].
      h_output_options-tdnewid    = 'X'.
      h_formname = layout.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname                 = h_formname
    *   VARIANT                  = ' '
    *   DIRECT_CALL              = ' '
       IMPORTING
         fm_name                  = h_fmname
    * EXCEPTIONS
    *   NO_FORM                  = 1
    *   NO_FUNCTION_MODULE       = 2
    *   OTHERS                   = 3
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION h_fmname
    EXPORTING
    *   ARCHIVE_INDEX              =
    *   ARCHIVE_INDEX_TAB          =
    *   ARCHIVE_PARAMETERS         =
    *   CONTROL_PARAMETERS         =
    *   MAIL_APPL_OBJ              =
    *   MAIL_RECIPIENT             =
    *   MAIL_SENDER                =
       OUTPUT_OPTIONS             = h_output_options
    *   USER_SETTINGS              = 'X'
    IMPORTING
    *   DOCUMENT_OUTPUT_INFO       =
       job_output_info            =  h_output_info
    *   JOB_OUTPUT_OPTIONS         =
        TABLES
          it_lfa1                    =   it_lfa11
          it_printtab                = it_printtab
          it_deductee                = it_deduc
          it_qrtrtab                 = it_qrtrtab
          it_challandetab            = it_challan
    * EXCEPTIONS
    *   FORMATTING_ERROR           = 1
    *   INTERNAL_ERROR             = 2
    *   SEND_ERROR                 = 3
    *   USER_CANCELED              = 4
    *   OTHERS                     = 5
      IF sy-subrc = 0.                                          "1375614
        CLEAR :spoolno,h_spoolids.
        READ TABLE h_output_info-spoolids INTO h_spoolids INDEX 1.
        IF h_spoolids IS NOT INITIAL.
          spoolno  = h_spoolids.
          CONDENSE :spoolno.
          MESSAGE i155(id_wt) WITH spoolno.
          PERFORM update_cert_tables.
        ENDIF.
      ENDIF.
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.     
    Can anyone Please help me to get TDS details on the Smartform.
    Regards,
    DivyaLalwani.
    Edited by: kishan P on Feb 23, 2011 1:28 PM

    Hi,
    Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
    Please checkout related notes and data population in the dibugger.
    Regards,
    Umang Mehta

  • Report Painter - Totals are different on face of report & line item details

    Hello,
    We have a report designed in report painter. Thye lIbrary table is GLPCT.
    When we run the report system gives e.g. 100 $ on face of report. However when we double click on that line to get a line item details reoprt the value is different. It is either less or more than the amount diaplayed on initial report.
    Please can you suggest what coule be the probable reason for this anamoly.
    Thaks & Regards
    Shreenath

    Hi Sreenath,
    when you double-click on a line you are jumping to another report.
    The report you are jumping to has either been defined as a linked report by you, or it has been copied from an original SAP-report if you started the creation of your report by copying a standard SAP report.
    The sending report tries to pass on all the selections for the cell you double-click to the line-item report. For standard SAP reports it is guaranteed that this should work and the line item report gives the sames results as the report you are calling it from.
    For self-defined reports, this may not always work. I have had problems especially when calling line-item reports from sum-lines of my self-defined report. The reason was that the selections could not be passed on properly.
    Example:
    line 1: selection on account X and profit center A
    line 2: selection on account Y and profit center B
    line 3: sum of line 1 and line 2
    Now, when I double-click on a cell of line 3 and jump to line items, it passes on the selection idependently, i.e.
    accounts: X, Y
    profit center: A, B
    the line item report now gives me all values for all combinations of accounts X and Y and profit centers A and B.
    It does not take into account the combined selections in my original report.

  • Prevent user from view line item details in KSB1 report

    Hi,
    how to restricting user from view line item details by double-click on it or highlight an item click on Document?
    Regards,
    Kelvin

    Hi,
    This issue got resolved.
    SAP suggested to execute the program "FAGL_CORR_0001" for company code wise.
    In ECC 5.00 from support pack 10 onwards two new fields has been added to table FAGLFLEXA.  (earlier we are on support pack 9, recently we applied the latest support pack)
    If we can execute the above program FAGL_CORR_0001, the two new fields will filled with relevant data and then we can able to use drill down option.
    This is for your information.
    Message was edited by:
            prasad naga

  • Printing GL line item detail - FAGLL03

    When printing a GL line item detail report like FAGLL03 or FAGLB03 with multiple GL accounts I always get a separate printed page for each GL account and for the total no matter how little detail is displayed. I can print all on one page if I sort by GL account but this removes the account number and description for each group and I need that for my users.
    Is there a way to print these GL detail reports where GL accounts are still separated with the account number and description shown above each section but will print continuously, without page breaks between accounts?   I don't see anything in the Print setup other than removing the AVS Statistics cover sheet which was a help.
    Thanks for any help,
    Jeff

    Thanks Troy,
    I just tried that and I see the results are displaying differently but it still prints each section on a different page.
    Thanks,
    Jeff

  • RERAIV LINE ITEM DETAILS

    Good afternoon Experts:
    We have been trying to configure RERAIV to include in its invoice printing the line item details like quantity, unit and price per unit but I cant seem to find these details. 
    The totals(and subtotals); gross amount, net amount etc are readily available and works well, we would really appreciate it if someone can help us display the line item details (unit, price per unit, quantity etc.)
    Thanks,
    Martin Dela Paz

    Hello,
    I don't think there is such config which will allow you to do so. Only thing allowed on invoices via standard process is summarization per contract per customer. To meet your requirement you can either make use to BADI for Rent Invoices BADI_RE_XC_RA_CH and implement for your use. I think best way to do this will be by copying and modifying the form RE_CN_120 which is used for generating invoices. beaware there are 2 forms one smartform and other PDF, You can always copy and modify the form to get desired results and include QTY, Material etc at item level.
    Let me know if you have further questions on this.
    Jag

  • PO: Combining repeating line item info with individual line item detail.

    I want to simplify the display PO t-code ME23N (and ultimately create and change) and I want to have a scrollable table with the line item info but I want to include in that scrollable table details that are only available on the item detail sub-area, e.g. account assignment info.
    Is this possible?
    Regards.
    Patrick.

    I assume this is a Personas question?
    That's not possible with Personas. You can't add extra columns to standard tables, nor create custom tables. You'd need to modify the underlying SAPgui transaction in the usual way and then simplfy that. How easy it will be to modify ME23N I have no idea - you'll have to ask over in the ABAP Switching, Enhancing, and Adapting Standard Programs space. I will say that some of the line item details are hard to include in the line item table, and account assignment is one of them - how to you represent split account assignment, for example?
    Steve.

  • How to get work item details programatically ?

    Hi All,
    I have a list of work items (process instances) and I want to retrieve each item details such as: attachments, notes, id, ...
    All the items are filtered and represented as Fuego.Papi.Instance:
    Fuego.Papi.Instance[] inst = busProcess.getInstancesByFilter(filter : instFilter);
    But the work item details are inherited from Fuego.Lib.ProcessInstance. So, how to get the item details from inst[] ?
    Would appreciate any help, may be Dan will have an advise ?
    Regards,
    Kim

    If you have instances returned by your filter, you could extract variable information for each instance by doing something like this:
    for each inst in getInstancesByFilter(ps, filter : instF) do
        // here's how to get the value inside a primitive instance variable
        orderAmtObj as Object = getVar(inst, var : "orderAmount")
        // here's how to get the value of attributes inside a complex BPM Object instance variable
        //    - in this case this is an "order" object with two attributes (customerName and amount)
        orderObj as Object = (getVar(inst, var : "order"))
        xmlObject = Fuego.Xml.XMLObject(createXmlTextFor(DynamicXml, object : orderObj, topLevelTag : "xsi"))
        logMessage "The value of the order object's customer name is: " +
               selectString(xmlObject, xpath : "customerName")
        logMessage "The value of the order object's order amount is: " +
               selectNumber(xmlObject, xpath : "amount")
        // here's a rather uninspired way to retrieve who the participant is that was assigned the instance
        logMessage "The participant assigned to this instance is: " + inst.participantId
    endInside the above "for" loop, you could retrieve these predefined variables (this example assumes you use "inst" in your "for" loop):
        objRet as Any
        objRet = inst.getVar(var : "PREDEFINE_ACTIVITY")
        logMessage "Activity name = " + objRet using severity = DEBUGSubstitute "PREDEFINE_ACTIVITY" in the above logic to get this information:
    PREDEFINE_PRIORITY (priority)
    PREDEFINE_ACTIVITY_DEADLINE (activity.deadline)
    PREDEFINE_CREATION_TIME (creation.time)
    PREDEFINE_PROCESS_DEADLINE (deadline)
    PREDEFINE_DESCRIPTION (description)
    PREDEFINE_PROCESS (process)
    PREDEFINE_RECEIVED_TIME (receptionTime)
    PREDEFINE_PARTICIPANT (participant)
    PREDEFINE_COPY (id.copy)
    PREDEFINE_STATUS (status)
    Similarly, you might want to try to get instance information using the Fuego.Papi.VarDefinition object a try. Never used it, but the logic might be as simple as:
        logMessage "who created? = " + inst.getVar(Fuego.Papi.VarDefinition.CREATOR_ID) using severity = DEBUG
        logMessage "does it have attachments? = " + inst.getVar(Fuego.Papi.VarDefinition.HAS_ATTACHMENTS) using severity = DEBUG   
        logMessage "does it have notes? = " + inst.getVar(Fuego.Papi.VarDefinition.hasnotes) using severity = DEBUGDan

  • Customer/Vendor A/C with line item details and with opening and closing Bal

    Dear Sir / Madam,
    Is it possible to have a customer and / or vendor Sub-Ledger account-
    with line item details and with opening and closing balance detail
    for a particular period.?
    Regards
    Chirag Shah
    I thank for the given below thread which has solved the same problem for G/L Account
    Re: Report to get the ledger printout with opening balances

    Hello Srinujalleda,
    Thanks for your precious time.
    I tried the referred T-Code
    But this report is not showing Opening balance, closing balance detail.
    It only gives transactions during the specified posting period and total of it.
    Please guide me further in case if I need to give proper input at selection screen or elsewhere.
    Client Requires Report in a fashion
    Opening Balance as on Date
    + / -  Transactions during the period
    = Closing Balance as on date
    As that of appearing for G/L Account by S_ALR_87012311
    Thanks once again & Regards
    Chirag Shah

Maybe you are looking for