How to copy namespace?
Hi,
I want to copy the all the contents of one namespace to another new name space?
plz tell me how to do that?
Thanks
Ruban
Edited by: ruban R on Mar 31, 2008 11:46 PM
Edited by: ruban R on Mar 31, 2008 11:50 PM
Ruban,
If your source and target SWCV are different then you can go for Release Trasnser
http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
If Source and Target are same, then you need to right clikc on copy the objects. You have to do it individually, there is no way for complete namespace copy.
raj
Similar Messages
-
How to copy a report into my namespace
how to copy a report into my namespace as said in this blog....
/people/michal.krawczyk2/blog/2005/11/09/xi-restarting-successfully-processed-messageshow to copy it my namespace
I didn't get what exactly you mean?
If you run any interface you will find its details in SXMB_MONI.
This report will pickup the data from Moni and resend the message. So its not Interface specific.
You copy the report from SE38 and try.
Gaurav Jain
Reward Points if answer is helpful -
How to define namespace with one XSD using in two different DB-Locations ?
I'm not clear,How to define namespace, targetnamespace, schemaLocation or NoNamespaceSchemaLocation
when using one common schema.xsd-definition
in two different database-locations for exchange xml-documents?
when insert xml-document I've got an error ORA-30937
do you have an good exsample ?
thanks
Norbert
schema :
<xs:schema
xmlns="http://sourcehost.com/namespace"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:oraxdb="http://xmlns.oracle.com/xdb"
targetNamespace="http://sourcehost.com/namespace"
xml-document :
xmlns="http://Sourcehost.com/namespace"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:SchemaLocation="http://sourcehost.com/namespace http://desthost:8080/sys/schemas/PUBLIC/ADRESSEN.XSD">
SQL> insert into ADRESSEN values
(XMLType
(bfilename ( 'XMLIMPORT_DIR', 'adressen.xml')
, 0 )
--> error :
ORA-30937: No Schemadefinition for "SchemaLocation" (Namespace "http://www.w3.org/2001/XMLSchema-instance") in übergeordnetem Knoten "/ADRESSEN"Norbert
The schema location used to register the XML schema with XML DB does not need to be a valid URL for accessing the XML Schema
I can use the same URL , for instance
http://xmlns.example.scom/xsd/myXMLSchema.xsd
on machines dbserver1, and dbserver2. The only reason some people choose to use the hostname / portnumber convention is that this makes it possible to validate the XML Instance documents against the copy of the XML schema stored in the XML DB repository using an external tool like XMLSpy without have to add entries to XMLSpy's OASIS catalog files.
I am concerned about the message you are getting. That's not correct AFAICT but I'd need to see the complete XML Schema and Instance to be sure. -
How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?
Hi friends,
How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?
Will all the relevant objects will be copied ? or we need to copy one by one ?
Do we need to create separate SWCV ?Thanks , Then the namespaces defined in copying object will automaticaly change to copied object namespace?
do we need to do anthing in SLD ?
Normally , predeliverd contents are uneditable right ? when we are copying all , will they allow to change the scenarios and BPM objects , like message type and interface type , mapping etc ? -
hi all,
can anyone please tell me how to copy a command group into our namespace
Regards,
Samuelhi
You need to create a advance copy of the command group navigate to system administration>systemconfiguration>Knowledgemanagement>content Management>user interface>Commands> ui command Group-->navigate to command and duplicate it or advance copy.hope this helps you.please do not forget to give points
with regards
subrato kundu -
How to copy file from global zone to non-global zone?
Hi,
I'm new in zone.
I have installed a zone and I would like to install some programs.
Could you please tell me how to copy downloaded file from internet to the new installed zone?
Kind regards,
DanielI like to use zcp which came from BigAdmin I believe.
#!/usr/bin/perl
# zcp - copy a file from the global zone to a nonglobal zone. Solaris 10.
# 10-Mar-2005, ver 0.50 (first release)
# USAGE: zcp file1 zonename:file2
# eg,
# zcp /etc/syslog.conf workzone1:/tmp
# Standard Disclaimer: This is freeware, use at your own risk.
# 10-Mar-2005 Brendan Gregg Created this.
$ENV{PATH} = "/usr/bin:/usr/sbin";
$VERBOSE = 1;
# Process arguments
# check for arguments,
if (@ARGV != 2) {
die "USAGE: zcp file1 zonename:file2\n";
# check source file exists,
$srcpath = $ARGV[0];
if (! -e $srcpath) {
die "ERROR1: Can't find source file $srcpath\n";
# check destination zone exists,
($destzone,$destpath) = split(/:/,$ARGV[1]);
chomp(@Zones = `zoneadm list`);
foreach $zone (@Zones) { $Zone{$zone} = 1; }
unless ($Zone{$destzone}) {
die "ERROR2: Can't find zone $destzone\n";
# check if destination is a directory or filename,
$dir = `zlogin -S $destzone '
if [ -d "$destpath" ]; then echo 1; else echo 0; fi'`;
if ($dir == 1) {
$node = $srcpath;
$node =~ s:.*/::;
$destpath = "$destpath/$node";
# Print message
print "zcp from $srcpath, to zone $destzone, to file $destpath.\n" if $VERBOSE;
# Copy File
system("cat $srcpath | zlogin -S $destzone 'cat - > $destpath'");
# Verify file copied
$srcsize = -s $srcpath;
$destinfo = `zlogin -S $destzone 'ls -l $destpath'`;
@Fields = split(' ',$destinfo);
$destsize = $Fields[4];
if ($srcsize != $destsize) {
print STDERR "ERROR3: Copy failed, size mismatch ".
"($srcsize != $destsize)\n";
} else {
print "Copy successful ($destpath, $destsize bytes).\n" if $VERBOSE;
} -
How to copy file from application server
Hello experts,
How to copy file from one folder of application server and paste it to other folder of application server(application server is same)?
Is there any function module exists???
thanks in advance
SaurabhHi you can use this function module to move a file from application server to another folder on application server.
call function 'WS_FILE_COPY'
exporting
destination = m_destination
source = m_source
importing
return = return.
Plus u can use this function module to delete the file from that folder from which u want to replace it.
call function 'WS_FILE_DELETE'
exporting
file = m_source
importing
return = return.
The above FM can help u copy a file from one folder to another and delete the file from that folder. -
How to copy/download all ABAP programs in a text with a single report ?
How to copy/download all ABAP programs in a text format with a single report/TC ?
How to copy/download ABAP source code with all include programs ?....
we need to search & copy all include programs everytime....Hi,
check this link
downloading programs
Regards -
How to Copy a Long Column in PL/SQL
Hello. Can anyone tell me how to copy a table that contains a long column? I am using Oracle 8.0.5 SQL Worksheet
with the following code that generates an ORA-06502: PL/SQL: numeric or value error.
CREATE TABLE "Tmp_CB_REPORT"
CB_RPT_ID NUMBER(38, 0),
CB_ID NUMBER(38, 0),
CB_REGION_ID NUMBER(38, 0),
WHEN_PULLED DATE NOT NULL,
PARSED NUMBER(1, 0) DEFAULT (0) NOT NULL,
RAW_DATA LONG NOT NULL,
JOINT NUMBER(1, 0) DEFAULT (0) NOT NULL,
RPTTYPE NUMBER(38, 0) NOT NULL,
OPTION1 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION2 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION3 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION4 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION5 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION6 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION7 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION8 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION9 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION10 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION11 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION12 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION13 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION14 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION15 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION16 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION17 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION18 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION19 NUMBER(1, 0) DEFAULT (0) NOT NULL,
OPTION20 NUMBER(1, 0) DEFAULT (0) NOT NULL,
REGION_ID NUMBER(38, 0),
RPT_TYPE_DESC VARCHAR2(40)
LOCK TABLE CB_REPORT IN EXCLUSIVE MODE NOWAIT;
DECLARE
CURSOR datacursor IS SELECT CB_RPT_ID, CB_ID, CB_REGION_ID, WHEN_PULLED, PARSED, RAW_DATA, JOINT, RPTTYPE, OPTION1, OPTION2, OPTION3, OPTION4, OPTION5, OPTION6, OPTION7, OPTION8, OPTION9, OPTION10, OPTION11, OPTION12, OPTION13, OPTION14, OPTION15, OPTION16, OPTION17, OPTION18, OPTION19, OPTION20, REGION_ID, RPT_TYPE_DESC FROM CB_REPORT;
datarecord datacursor%ROWTYPE;
BEGIN
OPEN datacursor;
LOOP
FETCH datacursor INTO datarecord;
EXIT WHEN (datacursor%NOTFOUND);
INSERT INTO "Tmp_CB_REPORT"(CB_RPT_ID, CB_ID, CB_REGION_ID, WHEN_PULLED, PARSED, RAW_DATA, JOINT, RPTTYPE, OPTION1, OPTION2, OPTION3, OPTION4, OPTION5, OPTION6, OPTION7, OPTION8, OPTION9, OPTION10, OPTION11, OPTION12, OPTION13, OPTION14, OPTION15, OPTION16, OPTION17, OPTION18, OPTION19, OPTION20, REGION_ID, RPT_TYPE_DESC) VALUES (datarecord.CB_RPT_ID, datarecord.CB_ID, datarecord.CB_REGION_ID, datarecord.WHEN_PULLED, datarecord.PARSED, datarecord.RAW_DATA, datarecord.JOINT, datarecord.RPTTYPE, datarecord.OPTION1, datarecord.OPTION2, datarecord.OPTION3, datarecord.OPTION4, datarecord.OPTION5, datarecord.OPTION6, datarecord.OPTION7, datarecord.OPTION8, datarecord.OPTION9, datarecord.OPTION10, datarecord.OPTION11, datarecord.OPTION12, datarecord.OPTION13, datarecord.OPTION14, datarecord.OPTION15, datarecord.OPTION16, datarecord.OPTION17, datarecord.OPTION18, datarecord.OPTION19, datarecord.OPTION20, datarecord.REGION_ID, datarecord.RPT_TYPE_DESC);
END LOOP;
END;
The copy works fine if I remove the long column from the CREATE TABLE "Tmp_CB_REPORT" statement
and the cursor copy statement. Any help is appreciated.What I think you should do is to turn your long into a LOB. LOBs are much malleable than LONGs. I suggest you have a look at the documentation for DBMS_LOB. You can create a function using DBMS_LOB that uses a temporary CLOB to reas your long column an dreturn a CLOB.
Cheers, APC -
How to copy attributes (as in which playlists) from one song to another
Hi,
Does anyone know how to copy the characteristics of a song--as in which playlists it appears in--from one song to another, so that the new song then appears on all those same playlists also? Or, if not, maybe you have some other idea for me:
I'm working with a Mac. I have several hundred playlists with ~100 songs each, and about 3,500 songs in my iTunes. Most of these songs are currently AACs. I've realized I have a problem: If I want to burn disks with MP3-format songs, I will need to convert the AAC to MP3s to burn them. If I don't want to have thousands of duplicate songs, I will need to trash the AAC versions of those songs from my library. If I do that, they will disappear from the playlists they are currently in (one song might be in 20 different lists). If I had to manually take each MP3 version created, look at which playlists the original AAC version is in, drag the MP3 version to each playlist, and delete the AAC version, it would take a Looooong time. Does anyone know of any shortcuts? For example, is there some way to copy the information about which playlists a given song is in and then paste that info onto the new version so it now appears also in these playlists? Or some other idea? Thanks very much!
MollyNever heard of any way of doing that. However, you may want to check out Doug's Scripts. There might be something there to help.
http://dougscripts.com/itunes/index.php
Best of luck. -
How to copy the same address for multiple contacts in Address Book?
Hi! I got a question, I didn't find an answer for yet.
How to copy the post address from one contact to another, without manual entering. I mean if I have one contact with already entered post address, can I just copy it someway at once to another contact?
I don't want cards to merge, I need separate contacts, that may have different phones, e-mails, but the same post address. Please, advise.Thanks! yes, this is a solution I'm following now. But I was wondering about the similar way as it is made in Daylite or Contactizer - you create company with name and post address first, and then can create a contact for that company. And company name and post address will appear in contact name.
I just wonder why such a simple and useful solution isn't available in Address Book as default.
I know there are many scripts written for Address Book. Maybe there is something for this purpose? -
How to copy a page( webpart page) with its content using client side.
How to copy a page(in my case webpart page) with its content(it may contain webparts) using client code (i mean using SPservices or ECMA script).
What i am planning is ,to give end user a page where it will contain text box to specify name of page and a button with the help of content editor webpart.
where on click of button we need to write client side code such that it should create a new page from a existing page in a library with given name by user.
Any suggestion would be helpful. For your information we can do it through UI with the help Site Actions / Manage Content and Structure.But i want to automate it using client side code.Server side code is restricted.
or can we create a template of an existing page with content without the help of sharepoint designer.
Thanks in advance
with regards RavichandraThis is good example
http://balajiindia.wordpress.com/2011/05/27/using-jquery-with-custom-web-services-in-sharepoint/
Create web service
http://balajiindia.wordpress.com/2011/05/27/using-jquery-with-custom-web-services-in-sharepoint/. Create method "Create Page" http://www.learningsharepoint.com/2010/09/17/create-publishing-pages-sharepoint-2010-programmatically/
Build your Java Script. You can use Content Editor Web Part if you want to avoid custom web part development http://www.codeproject.com/Articles/544538/JQuery-with-SharePoint
Oleg -
My external WD portable passport drive must be dodgy because I can't back it up or clone it or copy 3 of my 22 photo files to a new portable drive. I get error 36 as I attempt all 3 processes. I have copied my iPhoto library, iMovie events and most of my aperture referenced photos to the new drive. But cannot copy 3 files that contain the corrupted files showing just a grey triangle. I cannot delete or move to trash the corrupted raw photos.
How can I copy to the new drive any photos that aren't corrupted (grey triangle instead of photo or a photo that's just coloured horizontal broken lines) so I can then reconnect the referenced photos after copying them?
I am on late 2008 MacBook Pro with lion,
Many thanks
BwI've worked out how to copy and reconnect individual photos.
But can see that what's happening is that heavily edited raw photos are taking ages to load. Or not loading at all. And if opened go to the spinning wheel for 5-10 minutes. I am wondering whether to compress these or take them back to the originals or any other ideas would be very welcome.
Thank you
BW -
How to remove namespaces in mapping when using External Definition
Hi,
I read in the blog (/people/sameer.shadab/blog/2005/12/05/how-to-remove-namespaces-in-mapping--xi) that you are able to remove namespaces in mapping by deleting the value from XML Namespace under the Message Type. However, is it possible to do this when you are using External Definition (xsd) ? The blog only describe how to do this if you define a Data Type.Hi ,
No ..it is not possible to remove the namespace once you imported into IR of external defintion.You can remove your namesapce from external definition before importing into IR.
Sekhar -
How to Copy Standard form in Smartforms?
Hi Experts,
can anyone tell how to copy a standard form in Smartforms.
Thanks in advanceHi Abdul,
We have to copy them to '800'. (this is your own company define client no)
All Standard Scripts and their respective print programs are listed in table 'TNAPR'.
Ex: FORM MEDRUCK has the Driver Program SAPFM06P.
NOTE: Never make any changes to the Standard Driver Programs
STEP 1.
Goto Transaction Code <SE71> and
select from Menu UTILITIES ->Copy from Client.
Enter the Standard Form Name, It source Client 000 and the target Form Name that you want it to be saved as on your client.
Say you are naming it as zmedruck1.
Click on EXECUTE.
STEP 2.
Converting form to English.
Open zmedruck1 in <SE71> With language DE.
Then goto UTILITIES -> Convert Original Language from DE to EN.
Then you can modify the layout for example, chaging the logo, or changing the headers, or adding any new code to do some calculation etc.,
SAVE THE CHANGES AND ACTIVATE.
Then select from the menu FORM -> CHECK -> TEXT.
SELECT your driver program name from the list adn click on COPY.
If you don't see the program name in the list then click on
'APPEND PRINT PROGRAM' and add your program name and then select it from the list and click on COPY.
STEP 3: Assigning our form to the standard print program.
Start Tr.Code <NACE>.
In our present case since we are working on 'Purchase order' we have to select EF and click on the button Output Types.
Then on Right hand side, scroll down and select NEU - New P O Printout.
(This may change for different programs).
Then Double click on Processing Routines on Left hand side.
Change from Display -> Change Mode.
Give your form name (zmedruck1) for printoutput and SAVE.
STEP 4:
Start Tr.Code <ME22N> since you are working on Purchase order and click on print Preview to make sure your layout etc., changes are OK. If not again you have to make the changes accordingly.
If every thing looks ok then you can print your form.
Regards,
Sathish:)
Maybe you are looking for
-
I've had my apple tv for a while now, but have never actually purchased anything from the itunes store directly from the device. A friend recommended "Sleepless in Seattle" to me, and since it's not in Netflix or On Demand, I decided to buy it from i
-
Sending cfg via SNMP not working
Hi, I am trying to send some configs using SNMP to a 7200 (using 12.4(21a)) and it fails me on the last command when trying to start the procedure, as follows: persio.pucci@tacacs:/tftpboot$snmpset -v2c -c COMUNITY 10.20.30.1 .1.3.6.1.4.1.9.9.96.1.1.
-
How can I resume a movie rental download when it has been interrupted and says there was an error?
-
AppleWorks 6.2.9
AppleWorks crashes since I updated to 10.4.4 When I start typing it shuts down
-
Good day everybody I am new to workflow and I got one urgent requirement in HR workflow, This is a customized HR requirement for company employees leave form. I started developing form in dialog program, this is ok, and my questions are 1. How I can