How to copy only few pages to an other file
I try to describe exactly the steps I followed:
I have a file of 179 pages indd. Contains short stories. I used the files to produce a pdf file that I sent to print (a copy of proof).
So far so good.
I also made a blog where I want to publish the short stories one by one.
To this end,
I opened the initial file (let's call it "A") with InDesign
I opened a new blank file (let's call it "B")
I gave to B the same page dimension of A
I have highlighted in A the 5 pages of the first short storie, and with pages / move pages I have moved on B
I have these problems:
1) on B, along with 5 pages that I had highlighted on A, I have also two initial pages that I had not highlighted. Basically I did (I thought to do ) "copy pages from 3 to 7", and InDesign has been copied from 1 to 7.
2) these two initial pages I can not erase on B
3) I then said patiently: now I will produce the html file and then I will take off the 2 initial pages on it.
4) surprise: the html file contains all 179 pages of A!
5) then, exploring B, I saw at the end of the last page, bottom right, a red square that appears to be "brought back" the entire contents of A.
I am at the begenning, so please explain to me as if I were a child.
Thank's
Stefano (Roma-Italia)
Something is odd.
I have no problem such as you describe using the following proceedure:
Either select the pages you want to move in the pages panel of the "source" document and fromthe panel flyoout menu choose "move pages," or simply enter a range of pages to move in the dialog after selecting the command from the flyout menu.
Choose the new "destination" document and chosse if you will add the pages before or after the exisiting page.
Press OK.
In the destination the pages appear, and frames are threaded if they were threaded in the source, but no text is included in the thread before or after the section that was moved. You would still have any pages that were already in the destination document, but you should be able to delete them. If you have some keep option set to start on next odd page for the first paragraph of moved text, I think ID would add one extra page if the destination starts on page 1 and you move the pages after it, but again, you should be able to remove those extra pages.
Similar Messages
-
I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?
Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian. -
How to copy only some coulums and rows from excel files to a Oracle Table
Dear all,
I have the following problems:
How to copy only some wanted coulums ( I.e DATETIME(format:17/09/2007 00:00:01 ) and TIME (format: 00:00:01 ) from excel files to oracle table.
HOPE TO GET HELP FROM YOU GUYS!
SINCERELY,
MONOJSHARMALUITELHow about Heterogeneous Services so that the Excel sheet is an external database:
1- Go to Control Panel>Administrative Tools>Data Sources (ODBC)>System DSN and create a data source with appropriate driver. Name it EXCL.
2- In %ORACLE_HOME%\Network\Admin\Tnsnames.ora fie add entry:
EXCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.0.24)(PORT = 1521))
(CONNECT_DATA =
(SID = EXCL)
(HS = OK)
Here SID is the name of data source that you have just created.
3- In %ORACLE_HOME%\Network\Admin\Listener.ora file add:
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = <hs_sid>)
(ORACLE_HOME = <oracle home>)
under SID_LIST_LISTENER like:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\ORA9DB)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORA9DB)
(ORACLE_HOME = d:\ORA9DB)
(SID_NAME = ORA9DB)
(SID_DESC =
(PROGRAM = hsodbc)
(SID_NAME = EXCL)
(ORACLE_HOME = D:\ora9db)
Dont forget to reload the listener
c:\> lsnrctl reload
4- In %ORACLE_HOME%\hs\admin create init<HS_SID>.ora. For our sid EXCL we create file initexcl.ora.
In this file set following two parameters:
HS_FDS_CONNECT_INFO = excl
HS_FDS_TRACE_LEVEL = 0
5- Now connect to Oracle database and create database link with following command:
SQL> CREATE DATABASE LINK excl
2 USING 'excl'
3 /
Database link created.
Now you can perform query against this database like you would for any remote database.
SQL> SELECT table_name FROM all_tables@excl;
TABLE_NAME
DEPT
EMP -
HT1338 how to copy a external hard drive to other or copy songs from one to another
how to copy a external hard drive to other or copy songs from one to another
Don't understand exactly what you want to do. Can you restate your question?
You posted in the OS 10.3 forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Also you show iOS 6.1.4 on your profile. iOS 6.1.4 only runs on a iPhone, not a MacBook Pro.
Cheers, Tom -
How can I delete a page in a pdf file I received?
How can I delete a page in a pdf file that I received? I only have Adobe Reader X.
Thanks very much for your help. I’ll look into Acrobat. Have a great week.
Stephen E. Hincks, Sr.
(cell) 301.346.6110 -
How to copy NCLOB value(Contains Word Document) into file system
How to copy NCLOB value(Contains Word Document) into file system or display in sqlplus
The UTL_FILE package will write it only to text file not(NCLOB Value[containts images as well as text])
-
How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?
This is not really a Numbers question. I will provide an answer but suggest you make the question relavent for the forum where you post.
1) Open the PDF in Preview
2) select the menu item "View > Thumbnails"
3) select the page you wnt to share
4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
5) select the menu item "File > New From Clipboard"
6) save as a new name
7) share the new file -
How can we repeat specific page number of pdf file by using FDF Toolkit for Windows?
how can we repeat specific page number of pdf file by using FDF Toolkit for Windows?
let's say a registration form, there is only 1 full address provided in my registration pdf, but applicant could have more than 1 address, so i have to make it more flexible to extend the address page no matter how many addresses that applicant provided, i have use adobe acrobat pro to edit the form properties. but dont know how to extend/duplicate a page in felxible times.
Please advise~ tks so much!!! George -
How do i scan multiple pages into one pdf file
How do I scan multiple pages into one pdf file?
That depends on your scanning software. Adobe Reader doesn't scan.
-
How can i scan multiple pages in a single file in pdf.
How can i scan multiple pages in a single file in pdf using 1536 dnf.
Hi @veerendrajain ,
I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
Hope this helps.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt); -
How can I create a page break in a file?
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the following
two methods, but neither of them works. Specifically, it seems a special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt);
-----------------------------------Tien,
Try myFile.WriteText('\x0c'); instead of myFile.WriteText('\f');
Regards
Richard Stobart
-----Original Message-----
From: Wang, Tien [SMTP:[email protected]]
Sent: Friday, September 12, 1997 6:09 PM
To: Glen A. Whitbeck
Cc: forte-users; owner-forte-users
Subject: RE: How can I create a page break in a file?
Thank you, Glen. I tried WriteText. But it didn't work.
Tien Wang
Indus Consultancy Services
[email protected]
From: Glen A. Whitbeck
Sent: Thursday, September 11, 1997 11:59 AM
To: Wang, Tien
Cc: forte-users; owner-forte-users
Subject: Re: How can I create a page break in a file?
Instead of using "WriteLine," try using "WriteText" ("WriteLine" writes
TextData into an open file, while "WriteText" writes data to a stream)
like this:
<method 1>
myFile : file = new();
myFile.WriteText('\f');
Glen
Wang, Tien wrote:
Hi,
I am creating a text file for a report which contains multiple pages.
How can I create a page break in my file? I tried to use the
following
two methods, but neither of them works. Specifically, it seems a
special
character printed in the file. But when I print the file through a
WordPad, it didn't separate pages.
I am currently using version 3.0.C on Windows NT 4.0 with a HP Plus 4
printer. Any help will be greatly appreciated.
Tien Wang
Indus Consultancy Services
[email protected]
>
<method 1>
myFile : file = new();
file.writeLine('\f'); --- \f is the form feed in the C language
<method 2>
myFile : file = new();
j : IntegerData = new( value = 14 );
c : char = j.IntegerValue; -- c now contains ascii 14 (form feed)
p : pointer to char = &c; -- Set a pointer to the character
pageBreakTxt : TextData = new();
pageBreakTxt.Concat(p);
myfile.writeLine(pageBreakTxt); -
How to save a single page in a pdf file
how to save a single page in a pdf file?
I also need to do this so i can send portions of a large fax file.
-
how can i remove the page title above the File,Edit,View,History,Bookmark tab in firefox
In Firefox 29 and Firefox 30:
"3-bar" menu button > Customize
In the lower left, click the Title Bar button to switch the title on and off.
In Firefox 28, I actually can't remember!
I would be remiss if I didn't remind you:
* Firefox 28 is not secure: Mozilla has disclosed its [https://www.mozilla.org/security/known-vulnerabilities/firefox.html known security flaws].
* You can modify Firefox 30 to restore many of the UI features of earlier versions of Firefox using the techniques in the following article (and/or with assistance from forum volunteers): [[How to make the new Firefox look like the old Firefox]]. -
How to copy data from one column to other column
hi,
can any one tell me how to copy data of one column to other column for some specific data
example
productno ocalyear actualsales prevplansales currentplansales
p001 2007 100 120
p002 2007 90 100
p003 2007 120 130
p004 2007 140 120
p005 2007 150 150
i want to copy data of p001 and p002 from prevplansales to current plansales
productno ocalyear actualsales prevplansales currentplansales
p001 2007 100 120 120
p002 2007 90 100 100
p003 2007 120 130
p004 2007 140 120
p005 2007 150 150
is it possible to do?
please suggest me.
i will assign pointsHi,
I think the needed techniques are already described in the documentation, e.g. in
http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
or
http://help.sap.com/saphelp_nw70/helpdata/en/45/e641e4c61256dee10000000a114a6b/frameset.htm
The main techiques used in the above example to bind the filter of the planning function to selected (marked) objects in the analysis item or to drop down boxes (or both). These techniques are used in the above examples.
Regards,
Gregor
Maybe you are looking for
-
Replenishment delivery NL created without reference to STO
Dear All , I have noticed in SAP that replenishment delivery ( NL ) is created manually in SAP without referencing to Stock transport Purchase order. Can any one explain how it can be created or is it a glitch in SAP system . Looking forward to your
-
how can i add Icon In Address Bar. my homepage is created by flash (the index.html is created by publishing the homepage)
-
How to use LStrHandleArray in CVI
Hello, I have compiled LabVIEW drivers as a dll and am calling them from LabWindows CVI. One of my drivers has an arrray of strings. Each element will contain a 16 bit Hex number (0 - FF). I need to know how to define the LStrHandleArray in CVI, and
-
The application could not be installed...question
Hello ! I keep getting this error: The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location. I have tried deleting everything and startin
-
Airport extreme suddenly stopped "accepting" password. The signal appears strong -- just will not accept a log on. No changes have been made. It is not the modem. Have replaced the airport with my old linksys and wifi works fine. Is there a way