How to copy oracle 8.1.7 to another SID under Windows 2000

Hi my Hope ! :)
I've got problem as is written in subject. I have no idea how can I do it ? I made it under Oracle 8.0.6 but under 8.1.7 it doesn't seem works properly.
Under 8.0.6 I make it more less in that way:
On the source db I back up controlfile to trace resetlogs and switching logfile, after that I copy - then I receive file, which after changes, creates controlfile for new db (configuration,structure, enviroment is the same for source db as the target db). Finally, after log on to the new db and open resetlogs I receive information that db is incosistent - I've done lots of times the same things with Oracle 8.0.6 and there wasn't any problems.
Can You tell me what's wrong ?
Thank You,
andrew

Oracle 9iAS Documentation can be found at,
http://technet.oracle.com/docs/products/ias/content.html
You can access few samples of web query in
Oracle JSP demos, from your iAS Apache main page. There are XML, JDBC and SQLJ samples.

Similar Messages

  • How to install Oracle Content Database Archive Adapter for SAP on windows

    Hi,
    I would like to install CDAA(Oracle Content Database Archive Adapter) on 32 bit and 64 bit windows. Will somebody point me to where i can download this from (if its not free i would like to try out trial version first) . If it depends upon other oracle components what is that i need to install additionally . And if you could provide links to all the required components, it would be great help.
    Also if there is any demo from where i can see what all features CDAA support and how does it compare to other products say IBM commonstore etc , please let me know.
    Thanks a lot ..
    -Rohit

    Can any body help me to say thet "How to install Oracle Applications 11i(11.5.10.2) on Windows 2003 R2 X64 bit ' . Hi,
    I believe, 11i installation on Windows 2003 X64 is not fully supported.
    what is your os version:
    if it is windows 2003 32 bit, then it is supported on X86-64 servers for both database and application tiers
    If it is windows 2003 64 bit, then only datatabase tier is supported on x86-64 servers
    Have a look at the following note
    Frequently Asked Questions: Oracle E-Business Suite Support on x86-64 Doc ID: 343917.1
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=343917.1

  • How to copy one column BLOB value into another column of another database.

    How to copy one column BLOB value into another column of another database.
    BLOB value contains word document.
    I thought of copy the BLOB value into a text file and then update the new column value by the same text in textfile. Will this work?
    Is there any other better way to do this?

    You're welcome
    BLOB fields contains binary data. I don't think you can do this
    Also if I view the BLOB as text. Can I copy it and insert into the new database.
    I think your options are as I said. Datapump or CTAS
    Best Regards

  • HOW TO COPY A FORM FROM ONE TO ANOTHER CLIENT

    HOW TO COPY A FORM FROM ONE TO ANOTHER CLIENT

    Hi Tina,
    To copy either a Script or a Smartform fron one client to another client i.e from reference client 000 to any client say 010  follow instructions as given below:
    Go to Tcode SE71->Give Form name MEDRUCK then go to Menu path Utilities->Copy From Client, give
    Form Name: MEDRUCK
    SOURCE:000 (it will be already there)
    Target Form: Zmedruck(here give ur form zname)
    Execute
    It will be copied into all languages.
    Then come back to SE71
    Give your form name Zmedruck
    Language:: de then goto change mode
    then menu path->utilities->convert original languge to En and enter you will get a message original language of form zmedruck converted from de to en,
    now  change language de to en in se71 main screen and then do what ever changes you want to do , this is how you can copy a script or smartform from one client to another client.
    If this answer is useful reward points any queries revert me back.

  • How to copy and paste a photo in another folder using Aperture?

    How to copy and paste a photo in another folder using Aperture?

    What do you want to achieve? Do you really want to create a copy of an image, and thus create a second copy of the master image file? You will waste disk space this way.
    Usually you would create new versions of an image, if you want versions with different adjustments. Versions do not require much additional disk space. But all versions of an  image have to be in the same project. To create a new version: Main menu bar -> Photos -> Duplicate Version
    To create a copy of an image in another project (and to waste the space ) drag the image to another project while holding down the option key. This will create a copy in the other project.
    Sofar nobody here could come up with a good reason why one would want to create a copy. I am curious what in your workflow requires you to do that. Would you mind to tell us?
    Regards
    Léonie

  • Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

    I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
    It starts up, allocates some ram then closes before a window even pops up.
    I also have MSSQL server installed on this computer, does that conflict?
    Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
    OPS

    Yes. There is a bug with Pent4, Win2000 & Oracle8i.
    Here is the workaround:
    This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
    1) Copy the install directory from the CD to the hard disk.
    2) Edit oraparam.ini and modify it as follows:
    * Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
    * Edit the "JRE_LOCATION" line to show the full path to the CD ;
    JRE_LOCATION={CD DRIVE
    LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
    * Edit the "OUI_LOCATION" line to show the full path to the CD ;
    OUI_LOCATION={CD DRIVE
    LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
    * Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
    JRE_MEMORY_OPTIONS=-nojit
    -ms16m -mx32m
    3) Start setup.exe from your hard drive
    Choose a Custom install and choose not to create a database during the install.
    This way, the Database
    Configuration Assistant will not be launched during installation. DONT SELECT
    NET8 products for installation.
    You need to put the same java parameters for the DB configurator and the Net8
    Configurator
    to run.
    -nojit -ms16m -mx32m before -classpath on:
    * assistants\dbca\DBAssist.cl
    * network\tools\netca.cl
    ** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
    Hope it helps!
    Amrit

  • Oracle client version 9.2.0.3 for windows 2000

    Where can you find oracle client for 9.2.0.3 for windows 2000? Please advice.
    Thank you,
    Shawn

    Shawn,
    Instant Client was released in 10gR1 (10.1.0.2). Thus, it is not available for 9.2.0.3.

  • Oracle 8.1.7 copy db to another SID under W2K

    Hello ! I've got problem connected with copy Oracle 8.1.7 db under W2K (but I know that problem does not concern with Unix). So step by step:
    on the source db I back up controlfile to trace resetlogs and switching logfile, after that I copy - then I receive file, which after changes, creates controlfile for new db (configuration,structure, enviroment is the same for source db as the target db). Finally, after log on to the new db and open resetlogs I've got information that db is incosistent - I've done lots of times the same things with Oracle 8.0.6 and there wasn't any problems.
    Thank You for any help. Bye !

    dbassist is not working as we write dbassist on $ prompt following message is shown 'DISPLAY NOT SET' SET DISPLAY ENVIORNMENT VARIABLE
    HOW TO SET IT ANDMAKE DBASSIST WORKABLE

  • How to copy personalizations of a responsibility to another responsibility

    Hi All,
    I have done OAF Personalization at responsibility level for one responsibility. The same personalization is to be done for 60 more responsibilities. Please guide me on following points:
    1. How to copy the same personalization to other responsibilities?
    2. How to import the personalizations to application?
    3. How to migrate the personalizations on another instance?
    Thanks,
    Regards,
    Abdul

    Abdul,
    Use the Functional Administrator to get the XML files for the Personalizations. If you notice you would observe that for a particular file with path:
    oracle/apps/ap/abc/webui/XXPG
    the personalization xml wd be created as
    oracle/apps/ap/abc/customization/responsibility/12345/webui/XXPG (where 12345 is the responsibility Id).
    You would need to create 60 such copies with 60 different responsibility Ids. Also in the actual XML document you would need to update the responsibility key for each responsibility individually.
    As a suggestion why dont you do your personalizations at the site level itself. For those responsibilities where you dont need this (assuming that is lesser in number) you personalize again so that the site level personalizations dont take effect.
    regards
    Sumit

  • How to copy pictures from one iPad to another iPad?

    I want to copy pictures in my new iPad3 to my iPad1 without going through my apple computer.  Is there a way to do it?  I tried to use the usb connector to sync but it can only go from my iPad 3 to iPad1 but not the other way around.  (I did try to switch the "direction" of the usb connector.)
    If I have to go through my apple computer, how should I proceed?  I have created another iTune library for the new iPad3.

    Use Finder on your computer to locate your iPad when attached. Dig down through the folders (which will only contain photos and videos) to locate your photos. Select them and copy them to a new folder or folders on your computer and subsequently check that folder or folders in iTunes during a sync to the other iPad.

  • How I can do when I install Oracle 8.1.7.0 & Oracle9i core for Windows 2000?

    I downloaded Oracle8.1.7 standard Edition and Oracle9iAS Core for Windows NT.
    I installed them on Windows 2000 Server. I checked that Oracle HTTP server was working.
    But how can I get more information from Internet about Oracle Application Server?
    I want to query database through the web. Give me a simple example about it.
    Best regards,
    Richard Xu

    Oracle 9iAS Documentation can be found at,
    http://technet.oracle.com/docs/products/ias/content.html
    You can access few samples of web query in
    Oracle JSP demos, from your iAS Apache main page. There are XML, JDBC and SQLJ samples.

  • How to copy a standard search help to another field

    Hi All,
    I have a BSP screen in that for one input field i need to copy the standard search help for the Business Partner. Could any one guide me how to copy the standard search help for the business partner into the input field in the BSP screen.
    Thanks In advance for the help...
    Thanks,
    SAP SAP

    Hi,
    the BP search is its own web client UI component. For the integration you could check any standard transaction UI component like the BT115H_SLSO, as those contain several partner fields.
    Best Regards,
    Michael

  • How to copy object from transport request to another transport  request

    Hi All,
    Can some body tell me how to copy the objects which are there in on transprot request to another transprot request ? I think we can do this from the transction SE09 but I am not getting how to do this.
    Thanks&Regards
    Mahesh

    Hi,
    step 1.Go to se10, give your user id and clik display.
    step 2.There will be list of transport requests, go the respective request and point
               the cursor on the object under that request and click on delete button.
    step 3. Assign new request to the objects deleted.you can do this by activating all the objects once again.
    Regards,
    santhosh

  • Oracle 8.1.7 client installer won't work under windows 2000

    I am trying to run the latest oracle client install of 8.1.7 on my windows 2000 PC and when I double click on it, it show the hour glass for a few seconds, then nothing happens. No screens come up at all. I have a Dell PC with an ATI rage 16 MB ultra card and I have dowlnloaded the latest jre 1.1.8 and nothing helps. If I try another kind of PC like my ibm, the installer works fine. Dell has no answers??

    I found the solution on another discussion group and it worked for WinNT4 SP6a:
    First copy your CD content to your hard disk (by example c:\temp), then rename file "symcjit.dll" (by example "symcjit.old") in directory "c:\temp\Stage\Components\Oracle.swd.jre\1.1.7.30\1\DataFiles\Expanded\jre\win32\bin".
    Finally, run Setup.exe in directory "c:\temp\Install\Win32".

  • Installing SAP IDES 4.6c with Oracle DB under Windows 2000 server

    Hi everyone.
    As many people, i would like to learn MM module and the only way is installing SAP IDES on my computer.
    I have a SAP IDES 4.6 with oracle DB and i want to install under w2k server.
    Is there any weblog explaining how to install it?
    If there anyone has a guide, i will very pleased to receive it. My email is [email protected]
    Regards.

    hi inigo,
    please let me know if u find out i am also trying to instal ides 4.6c

Maybe you are looking for