How to copy paste a table structure from word document into Text Field [field format Rich Text]

In our current implementation we have a Blank page with Text Field [field format Rich Text] on generated PDF Document.
Once the PDF document is generated, user can copy paste content form any word/rtf document to into the Text Field.
Pasted content retains all text formatting [Bold, Italic, Underline, Indentation] except the Table format. Text Field is removing table metadata from the content and converting it into plant text.
Is there anyway to copy paste table structure as it is from word document into Text Field?

Hi,
I don't think you can! While you can paste formatted text into the rich text field, the table metadata means nothing to the textfield.
Niall

Similar Messages

  • How can I paste a pdf of a Publisher document into Pages so I can edit?

    I have been asked to print a document that was created in Publisher on a PC. I have been sent a pdf of the document, which is A4, printed both sides, with four A6 text boxes on each side, with the same artwork and text in each box. The trouble is, the layout is wrong so when it is cut into four the margins are not even. I have Acrobat 7.0 Standard (which is know is very old) but I haven't used it much and can't work out how to edit the pdf. At the moment all I can do is copy and paste the entire document into Pages but then I can't extract just one A6 text box from the rest. If I could do that it would be a breeze to set it up correctly in Pages so that it works when cut into four A6 pieces. When I go to Get Info it says it is not locked and I have permission to read and write.
    Can anyone explain these things to a beginner, please?
    Thanks!

    Chris
    There are several ways we can go about this.
    *1. In Adobe Illustrator* you can open the pdf file directly and chop out the bits you don't want and resave them individually. There maybe problems with fonts not being embedded as it comes from a PC where such things are mostly verbotten.
    *2. In Acrobat* you can do some editing and avoid the fonts issue. But the procedure is a bit more involved.
    If it helps, you need 2 things:
    +Menu > Tools > Advanced Editing > Select Object Tool+ and
    +Menu > Split Document… / Crop Pages…+
    Using this you can unpick the pdf file removing the parts you don't want. Not as simple as it sounds because you need to understand why some objects select with others and why some are unselectable which has to do with grouping, masking and compounding.
    *3. In Preview* cut apart the multiple pages and parts of each page. To split the multiple pages you will have to open the set and then delete the pages you don't want and save the remaining page with a new name.
    To delete a page click on it in the sidebar and hit delete.
    To crop a page use the +Select Tool+ in the top of the window and drag around the part of the page you want then +Menu > Tools > Crop+ and resave with a new name. Be aware this does not actually get rid of anything outside the select it just crops the view of it.
    *4. Which brings us to Pages*. Having divided the pdf into individual page files you can then drag them into Shapes on your page the size of the parts you want to show.
    When you click on the shape with page in it a little bar shows up underneath with +Edit Mask+. Click on the +Edit Mask+. You will see the shape, which is the mask, gets a grey dotted outline with white resizing boxes on the corners and mid points. If you need to adjust the crop or size of the shape drag on these.
    Behind the shape outline is the image with the cropped parts outside shown greyed out. The greyed out part is the hidden part. If you click outside the shape but on the greyed out part of the image you select the image itself and can pull at its corners or sides to change its shape. Or if you just click on the greyed part of the image you can move it around so that it moves relative to the shape cropping it.
    If you have several sections to be shown in each shape, you can move them one at a time to show each one. Say you have 4: 2 top and 2 bottom, option drag the shape with the picture in it to make 4 copies. Then in each one pull the image to reveal in turn top-left, top-right, bottom-left and bottom-right.
    Do this till you have all the parts separated and rearrange them where you want.
    *A bonus tip:* Cut out a step by opening Preview, next to Pages, with the multiple pages showing in the sidebar. You can drag the pages from the sidebar directly into the shape in Pages, without having to divide the .pdf.
    Any further questions just ask.
    Peter

  • How to copy all objects (incl. joins) from a BM into another existing BM

    Hello, i'm a regular viewer of this forum and now i have one issue that looks simple but i cannot resolve it.
    To make it less complex let's say we have a business layer with two business models (e.g. CIS-Finance and CIS-Logistics). For each BM we have a seperate subject area in the presentation layer.
    Each BM has unique objects, no object (like dimension time) is appearing in both BM's.
    Now there is a business requirements to have a 'mega' model, that is one extra BM that is combining both BM's. Let says we want to merge both model into one new big model.
    To achieve this I did the following:
    1) Duplicate CIS-Finance to CIS-All (using right mouse click on BM and click duplicate and change the name of duplicated BM to CIS-All)
    2) Then I select all objects in CIS-Logistics and copy all these objects and paste them into the new BM CIS-All.
    All selected objects were copied into the BM but the logical joins are not copied as well the content level information of the source tables.
    Is there a way to copy also this information (logical joins and content info), or do you suggest another approach to achieve this goal?
    Thanks, Ben

    what i did:
    1) i copied the original rpd to rpd2
    1) in the original rpd, i duplicated CIS-Finance to CIS-Logistics (so I have the same name for the BM to where i want to copy to)
    2) in the rpd2 i selected all objects in BM CIS-Logistics
    3) I pasted all objects to rpd BM CIS-Logistics (so BM has same name)
    unfortunately it doesn't work, all objects are copied but not the joins and content.
    You suggest UDML, can you be a little bit more specific? I searched the internet, found out what UDML is, but I cannot map it to what I want.
    Thanks.

  • When I copy paste an image onto a word document i only get a link?

    HELP!

    This only happens with Word and Power Point. I starte having this issues yesterday, before I never had a porblem with copying and pasting images from the internet.

  • Bullets which include links will prevent correct copy/paste content from word document to wiki page.

    I have a word document around 20 pages which contains the following sentence (a bullet with two links):-
    Now if I remove this sentence then copy/paste the 20 pages from word to wiki page they will be pasted correctly inside the wiki page , where all the pages, bullets, etc will be mapped correctly inside the wiki page as HTML tables, bullets ,etc.
    But the problem if I kept the above sentence then the whole 20 pages will be pasted as plain text inside the wiki page.
    So can anyone advice on this ?and how I can overcome it ?

    Hi John,
    You can try this (1) Save as Word Doc as single file web page (2) Open that file in normal text editor(notepad or so) and copy all (3) Goto Wiki page edit source and paste all (4) Save it
    Let us know how it goes.
    please 'Propose as answer' if it help you, also de-mark it if it didn't. Thank you!
    the result will be as follow, not sure if this is a valid approach can you adivce ?:-

  • How do I convert a pdf to a word document?

    How do I convert a pdf to a WORD document and keep all the formatting?

    Hi,
    Please verify your email address by clicking "this verification link" in the email from Adobe Systems Incorporated with subject "Welcome to Adobe" first.
    Using Web UI:
    Log into https://exportpdf.acrobat.com/signin.html with your Adobe ID and password
    Select “Export from PDF”
    Click “Select Files” button then choose your PDF file
    Select the format from the list below
    Check ON “Recognized text in” if your PDF file is scanned images to recognize the image to text
    Click “Export” button
    Click “Download” button in the progress bar after completion of exporting to download the file to your computer.
    Using Adobe Reader:
    Launch Adobe Reader X or Reader XI
    Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
    Select “Export PDF” then click “Select PDF file” link
    Click “Convert”
    Click “Download Converted File” link to download the file to your computer after the process is completed.
    Please let me know if you have any questions.
    Thank you.
    hisami

  • How to automate the generation of several Word documents into PDF?

    I want to generate in batch processes the conversion from Word documents into PDF. Could you tell me how?
    Thank yoou.

    Thank you for your answers.
    But I would like to launch a batch to generate PDFs and I don't find any explanation in the Adobe documentation telling how to do.
    Do you have any idea?

  • How to  access the ORACLE APPS table structures from SAP

    Hi Experts,
        How to  access the ORACLE APPS table structures from SAP? Is it possible from SAP?
    Thanks in advance
    Thomas

    Hi Silviya,
    you can access this database using a technique called DB Multiconnect - sometimes written as multi-connect.
    Search the SAP documentation and notes for this term and you will find how to do it.
    Essentially you configure the remote database connection via transaction DBCON.
    If your SAP system is not running on Oracle you will need to install the db-specific kernel files for Oracle along with the Oracel db client software - SQL*Net.
    Then you can access the Oracle database from ABAP using native-SQL. It works a treat!
    Cheers
    Graham Robbo

  • How to copy complete internal table into main dababase table

    please tell me how to copy complete internal table into main dababase table by overwriting all the entries of the main DBtable.

    HI,
    you can use<b> Insert Or  Modify statement ..</b>
    <b>Modify updates the existing record, insert creates a new one. ...</b>
    insert ZDBTAB from table itab.
    Modify ZDBTAB from table Itab.
    The structure of itab should be exactly the same as the z table.
    You should not update standard tables directly though.
    rewards if usefuyl
    regards,
    nazeer

  • Formatting issues in sharepoint 2013 when copy/paste from word document

    Hi, 
    When we copy/paste content(rich text, tables, styles) from a word document to SharePoint site whole formatting is messed up.
    is this the limitation of SharePoint 2013?
    Thanks, 
    Shiva.

    Hi Shiva,
    Some styles for font of rich text aren't be kept when I copy the content from Word 2013 and paste into a wiki page from SharePoint 2010/2013(even SharePoint 2007 like this
    post) site as same as yours, it looks like a limitation.
    As a workaround, we can publish the Word content as a Blog article in SharePoint site, then copy the content from the blog page to the needed SharePoint page, it will keep the rich text content format, you can have a try.
    http://plexhosted.com/billing/knowledgebase/274/How-to-publish-a-SharePoint-blog-article-via-Microsoft-Word-2013-SharePoint-2013.html
    Thanks
    Daniel Yang
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • AET : How do I enhance a table structure

    How do I enhance a table structure (not just one field), using the AET. Is this possible?
    All I have seen so far from you and other blogs (demos) is adding single fields to a header view like that. Now, I would like to add a add custom field (column) to a item list (for eg in a service order) which is a table structure.
    Please advise.
    Thanks in advance.

    Hi Satish,
    You mean you want to add additional column in result list right?
    Please make sure you have below things in place:
    1. Add a custom filed to object you want using AET.
    2. This field would be added to your structure for context of this view. Make sure that this field is added in view context (In case it is not automatically added)
    3. Make sure that this field in present in GET_TABLE_LINE_SAMPLE of your context(which is displayed as table). If not then please enhance this method and add this field.
    Your custom field would be displayed in available fields in view configuration. In case it is not then have a look at design layer of the object you want to enhance. This field should be present there (Your functional consultant should help you in adding this field in design layer). Please find my responses on below forum to add field in design layer:
    Re: New Column can not be added in chtmlb:configTable
    Please let me know if you face any difficulties.
    Regards,
    Bhushan

  • Returning table structure from Web Service...

    Hi,
    I have a web service which retrieves data from a database table. I want to use this web service from my Visual Composer to display the data on the screen.
    I want to know how to return the table structure from my web service. Currently i am returning a string array (only one row of data) from my web service and displaying it in the VC. But i want to include the names of the columns as well.
    I tried using 2D String[] and HashMap, both didn't work for me.
    Any ideas?
    Regards,
    Venkat

    Hi Venkat,
    I recommend to pass the headers in seperat variables and the data table in a array.
    I did something similar, without the header, because they are fixed in my scenario.
    This webservice returns a list of all Portal Roles:
         public roleModel[] getRoles() throws Exception{
                   // Array List as return value
                   ArrayList RoleList = new ArrayList();
                   // Try Block reading portal roles
                   try {
                        IRoleFactory rfact = UMFactory.getRoleFactory();
                        // Filter for PortalRoles
                        IRoleSearchFilter roleFilter = rfact.getRoleSearchFilter();
                        // Search for *
                        roleFilter.setUniqueName("*", ISearchAttribute.EQUALS_OPERATOR, false);
                        // Search all Roles
                        ISearchResult resultList = rfact.searchRoles(roleFilter);
                        // return the result list
                        if (resultList.getState() == ISearchResult.SEARCH_RESULT_OK) {
                             while (resultList.hasNext()) {
                                  // read roleUid
                                  String roleUid = (String) resultList.next();
                                  // create roleObject for roleUid
                                  IRole roleObject =     rfact.getRole(roleUid);
                                  //  instantiate new role for  ArrayList
                                  roleModel rolle = new roleModel();
                                  // read DisplayName and UniqeID
                                  rolle.setRole(roleObject.getDisplayName());
                                  rolle.setRoleID(roleObject.getUniqueID());
                                  rolle.setDescription(roleObject.getDescription());
                                  // add object to ArrayList
                                  RoleList.add(rolle);
                        // create new array from data type model roleModel (class)
                        // in the correspoding size
                        roleModel[] returnList = new roleModel[RoleList.size()];
                        // write ArrayList back to array
                        RoleList.toArray(returnList);
                        // return all portal roles
                        return returnList;
                   // exception handling
                   } catch (Exception e) {
                        throw new Exception(e);
    Hope that helps!
    Best Regards,
    Marcel

  • Return Table Structure from Web Service...

    Hi,
    I have a web service which retrieves data from a database table. I want to use this web service from my Visual Composer to display the data on the screen.
    I want to know how to return the table structure from my web service. Currently i am returning a string array (only one row of data) from my web service and displaying it in the VC. But i want to include the names of the columns as well.
    I tried using 2D String[] and HashMap, both didn't work for me.
    Any ideas?
    Regards,
    Venkat

    Hi,
    I have a web service which retrieves data from a database table. I want to use this web service from my Visual Composer to display the data on the screen.
    I want to know how to return the table structure from my web service. Currently i am returning a string array (only one row of data) from my web service and displaying it in the VC. But i want to include the names of the columns as well.
    I tried using 2D String[] and HashMap, both didn't work for me.
    Any ideas?
    Regards,
    Venkat

  • How can I get the XML structure from a flat structure?

    Hi all,
    in my XI SP 12 I use a JMS adapter to read information using the WebSphereMQ transport protocol.
    The structure that I receive have this format:
    <Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value>
    <NumberRecordType_B><NumberRecordType_c>
    <Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
    <Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
    <Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
    <Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
    the problem is that in this structure each line is not separated by a carriage return or a comma, I have all the information in a single line:
    <Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value><NumberRecordType_B><NumberRecordType_c><Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>...<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value><Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>...<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
    and the customer don't want to insert a line separator.
    Then, the question is:
    How can I get the XML structure from this structure?
    If possible, I don't want to develop new Module and add it in the JMS Module Sequence.
    PS I have already read the article "How to Use the Content Conversion Module with the XI 3 J2EE JMS Adapter.pdf" and it doesn't seem to help me.
    Best Regards,
    Paolo

    To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
    ServletContext context = getServlet().getServletContext();
    String tempContextVar =
    context.getInitParameter("<your context param >");

  • How to copy file to another server from database using FTP in oracle

    How to copy file to another server from database using FTP in oracle.
    Please do the needfaul.

    Billy  Verreynne  wrote:
    BluShadow wrote:
    Not to mention that some FTP servers can return more than one return message per operation whereas others may return one message for the same operation.I had the problem using the LIST command to determine if a file exists on the server. Cannot be determined via the FTP server's return code. Which means parsing and checking the text response from the server to the command. And this vary from server to server.
    But the basics were quite easy to code. The entire package is 500 lines, includes comments and blank lines for formatting, and supports the basic FTP client command set. Not really a complex piece of software to write - but I found that many developers seem to think that writing network socket software is complex. Not really the case...Mine's a big larger, but incorporates functionality similar to what Chris provided in his, such as being able to use SQL to query a remote file using pipelined functions, or functionality to write the results of a query directly to a remove file.
    :)

Maybe you are looking for

  • How can I tally the fs10n and fbl3n balance?

    Hi sap gurus, I have got issue regarding the fs10n and fbl3n balance variance in production system. Hence i would like to request you all please provide solution for early. Advance thanks Regards Rakesh

  • HT204266 How do I uninstall the app store or get it to stop harassing me?

    Everyday I am harassed to update my software. No, means no. Please leave me alone. I don't want to be harrassed tomorrow or in an hour. No means no. Why do you think you get to shove it down my throat? I didn't buy an apple to get nagged and harrasse

  • Finding missing sequence

    Hello all. I'm using the Oracle 10g Database. i'm trying to figure out how to write a simple sql query to: find the missing numbers in a table between say 86002895 and 86005197 (inclusive) Ex: Current Scenario : table_1 : tracking_no | id_value 86002

  • When I click on the App Store I can only see "games" at the top of the screen, I can't see any Apps?

    Recently I have noticed that when I click on the App Store on my iPad it defaults to "games" at the top of the screen and I can't see any new apps? Previously it defaulted to Apps and you had to chose "games"  but now it seems to default to games and

  • Setting JTable cell editor

    Hallo, I have troubles setting jtable cell edtior. when i run code below, editor stays unchnaged. Do you know where's the problem, please (except in programmer^_^) ??? import java.awt.*; import javax.swing.*; import javax.swing.table.DefaultTableMode