How to copy Restore database in new server and new domain.

Hai all,
I'm trying to backup a database from one SQL server and restore it to another (both are SQL2008 R2) but diff domain. 
when I try run few query, the output is empty. Please advise.
noor hafizah

Hi Noor,
Filtered views use the Principal Access Object to determine the records to be shown to the current user (the one executing the query). You will not be able to see any results if the account not defined inside CRM.
Please try to
assign the correct security role to the user account.
If you have more questions related to CRM, you can post in the Microsoft Dynamics CRM Forum . More experts there will assist you.
Regards,
Fanny Liu  
Fanny Liu
TechNet Community Support

Similar Messages

  • Move appset to new server and new version

    Hi
    I am currently on 5.1, SQL 2005 and Windows 2003, where we have some performance issues. To see the effekt of an upgrade I would like to move my current appset to a new server with BPC 7.5 SQL 2008 and Windows 2008.
    How should I do this?
    Can I make a clean installaion of BPC 7.5 on SQL 2008 and then restore the 5.1 version appset into 7.5.
    What is the recommended way to do this.

    Hi,
    There is nothing to worry.
    You need to take the backup from the 5.1 system and restore it in 7.5 MS. After the restoration, please make sure that all the components are working fine or not. You might have to look at the security once again and the reports and the input schedules. There might be small small alterations / modifications required. However, there wont be any big development. There is only one area which needs little more concentration - SSIS packages. You might have to re-build the SSIS packages in SQL 2008. Another thing is that if you have any macros or VB in your templates, you might have to revisit them.
    As a whole, I dont see much challenge in this whole process.
    Hope this helps.

  • How Can I Restore database from datafiles, control,redolog  and  parameter

    Hi there,
    The scenario is Database Server is down, meaning that OS has been corrupted, data files and other files can be retrieved from the hard drive. Database is not is archivelog mode, No full backup of the database is available. Only Full DMP Backup is there. I have imported the full dmp backup but is seems like it could not import all of it. Specially some of the Packages and triggers are missing or invalid(does not compile successfully). May be dump backup has been corrupted.
    Now Can I restore all data with other objects(views,packages,triggers)in different server and different database if I can copy all datafiles, controlfiles, redolog and other parameter files? Please reply with solutions
    Hasan Al Mamun
    Programmer
    Bangladesh Bank.
    Dhaka, Bangladesh

    pgoel wrote:
    Yes, Create same directory structure on new server and copy all datafiles, controlfiles, redolog and other parameter files at new location and re-start the database again.OP has stated that db in not in archivelog mode and no full backup has been taken. If the database crashed while open, recovery using what you have described is impossible AFAIK (unless Consulting gets involved).
    Srini

  • Restore on new server with new DB_NAME/SID?

    My goal is to restore database with the RMAN backup on a server that has no connectivity to the production database (I don’t want to use duplicate command).
    I restore a database from RMAN using a same DB_NAME/SID and everything was ok.
    -     restore spfile
    -     restore controlfile
    -     restore database
    -     recover database
    -     open with reset logs
    Now I want to restore database but with different DB_NAME/SID (My production database is PROD and I want to restore this PROD RMAN backup on new server and this new database I want to be called DEV).
    How to restore database with new DB_NAME/SID?
    Oracle 10g, Windows Server 2003
    Thanks in advance!

    user9106065 wrote:
    My goal is to restore database with the RMAN backup on a server that has no connectivity to the production database (I don’t want to use duplicate command).
    I restore a database from RMAN using a same DB_NAME/SID and everything was ok.
    -     restore spfile
    -     restore controlfile
    -     restore database
    -     recover database
    -     open with reset logs
    Now I want to restore database but with different DB_NAME/SID (My production database is PROD and I want to restore this PROD RMAN backup on new server and this new database I want to be called DEV).
    How to restore database with new DB_NAME/SID?
    Oracle 10g, Windows Server 2003
    Thanks in advance!You can use NID command
    Run NID and you can see the options to run
    or see How to Change the DBID, DBNAME Using NID Utility in version 10GgR2 onwards [ID 863800.1]
    Cheers

  • How to create a database in Sql server management studio

    how to create a database in Sql server management studio

    One method is to run the SQL statement below from a SSMS query window:
    CREATE DATABASE MyDatabase;
    You can also right-click on the Databases node in SSMS Object explorer and select New Database.
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • How to create restore point in windows server 2008 service pack1

    hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
    restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?Bhaskar

    AFIK, Restore Points doesn’t exist in Windows 2008.
    Volume Shadow Copy option can be used to achieve:
    Creating consistent backups of open files and applications
    Creating shadow copies for shared folders
    Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
    Quickly recovering and restoring files and data
    It is more like a file, data, application backup. 
    Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
    Blogs - http://blogs.sivarajan.com/
    Articles - http://www.sivarajan.com/publications.html
    Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
    This posting is provided AS IS with no warranties, and confers no rights.

  • HT201269 I have new iphone and all data were restored but my music! How can I add my music from Itunes and new iphone?

    I have new iphone and all data were restored but my music! How can I add my music from Itunes and new iphone?

    Connect the old phone to your computer, right click on it in iTunes, and choose Transfer Purchases. That should put all of your music in iTunes except any tracks that were not purchased from iTunes. If you have any such you will have to retrieve them from the original source, or see: https://discussions.apple.com/docs/DOC-3141.
    Apple also has this tip for copying data from an old phone to a new one.

  • HT5096 how about copying the backup to a server instead of a hard drive?

    how about copying the backup to a server instead of a hard drive? Doesn't seem to work.

    ISP's cap your upload speed to a fraction of your download so you don't run a server off your computer.
    You can certainly spend more money to upload faster, but it's a waste of money and the data online can vanish or be held or spied upon.
    Then there is a prolem that you want to restore your system and there is slow Internet.
    Apple now requires fresh OS X installs to come from them online, it's better to have local drive to boot from anytime, so a bootable clone is ideal, better than TimeMachine which is only a backup system
    Most commonly used backup methods

  • How to Migrate the 12 Hives to new server in new farm

    Dear All,
    How could I migrate the 12 hives to new folder ??
    Are there specific folder I just copy/past or I just copy everything and override the original ?
    Thank you

    My first question would be why? Any customizations, hopefully, should be in .wsp format.
    Assuming you have manually copied files into the hive folder and are looking to get them to the new server, copying the whole hive across is a really bad idea. What I have done in this situation (more than once) is to use a differencing app such as Notepad++
    (with plugins) or WinMerge (my personal fave).
    1) Copy the hive from the source server to a temp folder on the destination server
    2) Use one of the apps above to compare the two directory structures
    3) Copy across just the missing files from the source folder to the destination hive
    By doing it this way you ensure you don't damage your fresh clean hive on the new server, and you should be able to get across the manual customizations you need.
    Good luck!
    -Corey

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • How to connect external database(Ex:SQL Server/Tivoli)  from ABAP Webdynpro

    Hi,
    Any one have idea how to connect external database like SQL Server/Tivoli to access tables from WebDynPro ABAP.
    Please point to me some links if you have
    Thanks
    Praveen

    Hi,
    Please check out this link -
    FETCH DATA FROM ORACLE DATABASE USING Web Dynpro
    Regards,
    Lekha.

  • How do you restore your itunes on to a new macbook when your last macbook was stolen?

    Hi
    Is there a way to restore your itunes and apps on to a new macbook when the old one was stolen?
    I have all the music and apps still stored on my iphone but don't want to sinc as I'm sure it will erase everything on my iphone.
    Any advice welcome
    Thanks

    mlcollard wrote:
    Thanks both - I have accessed my itunes account using my apple ID - but I don't see how I can restore all my previous purchases and am still nervous about plugging in my phone should it not recognise the account - though it did tell me this was the third computer I'd asked for access - which is correct.  Are you saying I can now plug in my phone and sync without loosing everything on my iphone? and what about the apps?
    I said not to plug in the phone until you have restored the iTunes Library:
    Open iTunes: Store Menu (in Sidebar) Purchased:
    Select music 'Not on this Computer' and download, repeat for Apps etc.

  • Moving to new server and from 11.2.0.1 to 11.2.0.3 at the same time

    I have 2 11.2.0.1 databases running on windows server 2008, and am moving them to a VMware server running the same OS.
    While I am doing this, I figure I may as well apply the 11.2.0.3 patch by installing it on the new server and upgrading the databases.
    I've yet to do an "out of place" patch, so I'm assuming I can do the following:
    Install 11.2.0.3 on the new server running the setup.exe -downloadUpdates command, copy backed up datafiles (from online or offiline backups) over from current prod databases, restore them with rebuild controlfile & open database, then shut down and do startup upgrade?
    Or would it be a better practice to create the databases on the new server and just do full imports?
    thanks in advance.

    Thanks - since the first one I am moving over is a test database, I just created the instance on the new server, shutdown the source test database then copied sp & control files & datafile directory structure over with data files, and decided to try DBUA rather than startup upgrade. Right now it's about 1/2 way through the upgrade so we'll see how it goes.
    For the production database I am going to first try my cloning technique then do a startup upgrade or use DBUA. What I'm thinking about doing is copying my last (user managed) online backup over (after creating the instance & directories), doing a startup no mount, rebuild the controlfile to reflect any changes, recover with backup controlfile & apply latest redo, open with resetlogs then shutdown and startup upgrade (or DBUA).
    If that works well that's probably the way I'll do the actual production roll over this way, but leave it in recover mode until I shutdown the old database and apply the last redolog, then upgrade it.
    I suppose that given these databases are relatively small I could also do the upgrade first then just drop the schemas with tables in them and do a schema level impdp.

  • Installing contact center enterprise 6.0 in new server and upgrading to 7.0

    Hi,
    I am trying to install contact center enterprise 6.0 into a new server ( earlier both call manage 4.3  and enterprise 6.0 were in the same BOX). So now i am upgrading cucm4.3 to 7.0 and installing enterprise 6.0 onto a new server taking backup from the old server and restoring in the new server. and after that i am planning to upgrade the Enterprise version to 7.0. Is this the right way or there is any other way.

    Take a look at the 7.0 Upgrade Guide for your options. You'll be looking for Tech Refresh.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/installation/guide/Upgrade_Guide.pdf
    Is there any reason why you are not upgrading to UCCE 7.5 which is compatible with UCM 7.0?

  • Moved to new server and needing help with feed

    My website www.gothamknightsonline.com has been moved to a new server and I am needing to keep the feed updated with new and old podcasts. I have reposted some of the old episodes as well as a new one I just posted. I have not been able to get the feed to show up. When I view our podcasts itunes page all of the info on each individual podcast is now gone with just the episodes listed and no more information.
    Here is the feed URL: http://gothamknightsonline.com/category/podcast/feed/ (I have verified the feed) but I am not certain if this is the same feed URL that was listed before. Either way the plugin i used for my podcasts in wordpress has this in the feed as well as our iTunes id and URL ( http://itunes.apple.com/us/podcast/batman-gotham-knights-online/id315370686)
    I am doing all of this on a Wordpress blog using the podpress plugin.
    Any help would be appreciated. Thank you
    -Garrey

    iTunes is looking for a feed at http://www.gothamknightsonline.com/feed/?cat=10 and not finding it - checking this I don't get 'file not found' but if there is a file there it contains no data whatever.
    I assume this is your original feed URL. The method for redirecting iTunes to another feed URL involves placing a special tag in the original feed, and is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
    Your new feed contains this tag (effectively redirecting to itself); you need to place a copy of the feed, with the redirect tag, at the original URL and leave it there for a couple of weeks. If you are unable to do this the two alternatives are described in my article.

Maybe you are looking for