How to copy RKF and to change the techincal name ?

Editing restricted key figures:
Note that when you change a restricted key figure, these changes are effective in all queries that use this restricted key figure.
You can see where the restricted key figure is used. Choose Where-used List from the context menu of the restricted key figure (secondary mouse click).
       1.      In the InfoProvider objects display frame, select the restricted key figure and, from the context menu (right-mouse click), choose Edit.
       2.      Make the required changes.
       3.      Choose OK.
Pl. refer following link on help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/61/d0b143aa26b849b4e79a859ea1d7d1/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2a/eabc3d9ecc6b3be10000000a114084/content.htm
Regards,
DN

Similar Messages

How do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series

how do I find and/or change the pre-set voltage selection switch in an HP TouchSmart IQ500 series (specifically an IQ524)
This question was solved.
View Solution.

Doesn't it use an external AC Adapter? If so, all you should need to use in another country is an adpater plug to match the wall socket.
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

I can no longer change my song names like i used to. i use to be able to right click and go to "get info" and then change the song name, artist and album, now i can't is there any other way to change the songs name and info

When I get songs and put them on my itunes accout on my computer I used to be able to rename them right clicking, going to "get info" and then renaming everything I wanted like song name, album and artwork. I also use to be able to click on the song then click and hold on it and be able to rename it. But all the songs I have gotten after the last update have not been able to be renamed in any of the old ways I use to be able to. Is there any other way to rename songs because I know I can't undo updates and that seems to be whats causing it.
Thankyou for your time

You are describing an iTunes problem, not an iPod touch problem. Try posing in the iTunes forum.

To change the technical Name

Hi Gurus,
Is it possible to change the technical name once activated?
How to change the Technical name of customize characteristics of infoobject?
Thanks & Regards,
San

Hi,
You cannot change the techincal name ever...its not possible and not even basis can do that.
I am not sure but try to open the system with the basis help and delete the entries from all the infoobject related SAP standarad tables...may be this can help.
Thanks

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

How do I move an object from one photo to another and then change the scene, i.e. winter to sum?

How do I move an object from one photo to another and then change the scene, i.e. winter to summer?

OK.
Open the picture with the new scene. This will be your canvas.
Open the picture with object A, select it with one of the selection tools, go to Edit>copy
Go back to the new scene/canvas, Go to Edit>paste
Repeat for object B
Use the move tool to position A & B, each on its own layer. Use the corner handles of the bounding box to resize, if necessary
You should have 3 layers: Background layer, and the 2 layers with A & B
Note: It's best if the resolution of the 3 picture files is the same value.

Copy the SQL Binaries and Data to another drive and then change the drive letter to previous drive letter

Hi All,
We have SQL Server 2012 SP1 installed on E drive (which means SQL Binaries, Database and LOGs) are in the same drive E, we are not able to backup the SQL Server because according to Backup Vendor their is a problem with the DISK E which is why the backup
is not successful, We have added one more drive with the same space, we have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to
start SQL Service but it was not starting, we have again reverted back the original drive to E and service was successfully started, please note here that SQL server service logon is NT service / local service. Please help us that how to do achieve this as
we are using the same E drive and OS should not know any thing. Please help us to copy and then change the drive letter to E so that we can delete the old drive.
Thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync

We have stopped SQL Server services and copy each and every thing from E drive to new drive and changed the current E Drive to K and changed the new drive to E, after that when we tried to start SQL Service but it was not starting,
You should not have done this. Even if you install complete SQL Server on Separate dedicated drive few binaries would always go on system drive that is C drive so your idea of moving files to other drive would sure create a problem. As a fact you cannot
move SQL Server complete installation from one drive to other apart from uninstalling and reinstalling again.
Copy it back an hope fully you would be able to restart. Why should you take a product which allows you to change sql server drive its a bad product. I guess backup engineer does not how to configure backup agent
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

How to change the "short name (account name?)" and home directory name?

Hi,
I recently purchased a new iMac and migrated account info from my MacBook Pro. I happened to use random account name during migration without knowing it will not be easy to change the short name (account name?) and home directory name. As a result, I am now having extremely confusing short name and home directory name on my new iMac.
I did online search to find out how to change the two names, but I could only found somethig like "enabiling root user and....." I have no idea what it was talking about and I don't want to take risk altering such advance set up manually.
Please advice how I can change the short name and home directory name safely without much PC knowledge.
Thank you very much in advance.

There are a few ways of doing this. The easiest method is logging into the first account and copying everything to an external drive (or flash drive or whatever), which changes the permissions so that others can see the files.
Then, login with the new account and copy the files over. Once they are copied, the correct permissions will be applied again (so other people on your computer can't access them).
If you can't do this method for one reason or other, you can do some terminal commands to change the ownership of the files. Login to the new account. If it is an admin account, open terminal and type the following command:
sudo chown -R -v yourusername:admin /Users/originalaccountnamehere
That should change the ownership of the files from your old account to the new one. At that point, you can simply drag the files into place.

How can I change the account name in iCloud. My email has changed and I want to change it on iCloud.

How can I change the account name in iCloud. My email has changed and I want to change it on iCloud.

To change your iCloud ID, go to Settings>iCloud, tap Delete Account, then sign back in with the new ID. This deletes the account and your iCloud data from your device, but not from iCloud. Provided you are signing back into the same account, your iCloud data will reappear on your device when you sign back in.
To avoid losing photo stream photos, save them to your camera roll (if not already there) before deleting the account. To do this, open your my photo stream album, tap Edit, tap the photos, tap Share, then tap Save to Camera Roll.
To change the ID on your Mac, go to System Preferences>iCloud, sign out, choose Delete for all the prompts (your data will still be in iCloud), then sign back in with the changed ID.

How to change the default name of new adjustment layers? (and other Q's)

How do I change the default name of new adjustment layers?
How can I make it so that adjustment layers don't come with a mask when I create them (unless I have a selection active)?
Why isn't the Shadows/Highlights functionality an adjustment layer? It's accessable under "adjustments" but you can't use it non-destructive
Where can I find documentation on Photoshop's API? (I want o make tools for it - javascript)

Forgive me for not looking into your Maya-specific links, but one can automate Photoshop using JavaScript indeed (on Windows also VB, on Mac also AppleScript).
Not everything can be automated naturally, but a lot – and it can really speed up many tasks; and with the »small« repetitive ones like saving copies off of files etc. combining Scripts with Configurator Panels can be especially convenient.
There is a Scripting Forum over at
http://forums.adobe.com/community/photoshop/photoshop_scripting
As for plugins: it's something I would like to learn some day (I guess you would have to go with Flash and AS3 for making actual plugins)
I think you might also have to learn C++ or C.
There is Forum the contributors to which might be able to give you pointers if you get to that.
http://forums.adobe.com/community/photoshop/photoshop_sdk

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

OK so I just made a wireless network and using the apple box or whatever. And I want to change the network name. How do I do that?

Just want to confirm that I am also having this issue, The connection is fine, and it is in fact charging (@ 100%)
Everything Rick has said is like an echo to what is happening to me.
I have tried re-installing iTunes, and restarting the Bonjour service, sadly there is no change.
earlier before i updated iTunes it recognised my iPod but said that I had to update iTunes in order for it to work.
So i updated iTunes but now it's not even showing the device anywhere.
In case this helps:
OS: Windows 8.1
iTunes version: 11.3.1.8
Device: 5th generation iPod touch 16GB with ios 7

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?

Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
       try {
            Class.forName("org.gjt.mm.mysql.Driver").newInstance();
            Connection c = DriverManager.getConnection(
                                                       "jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
            Statement Stmt = c.createStatement();
            int count = Stmt.executeUpdate(cmd);
            if(count>0) {
                 System.out.println("count: " + count);
        } catch (Exception e) {
            e.printStackTrace();
    }That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful.

How do I do a mass change of face names in iphoto? For example, I have 500 pictures named Michelle Smith, but she is married and is now Michelle Johnson. How do I change all the photo face names to the new name en masse?

How do I do a mass change of face names in iphoto? For example, I have 500 pictures named Michelle Smith, but she is married and is now Michelle Johnson. How do I change all the photo face names to the new name en masse?

You edit the name in the Corkboard view.

When bates numbering a .pdf in XI, how can I change the file name to include the bates number AND its name? I know under file output, there is an option for either/or. I want both. Thank you.

when bates numbering a .pdf in XI, how can I change the file name to include the bates number and the file name? I know under "file output: it's either/or. I need both. Thanks!

Long ago I wrote a little demo using the touch command. Check out the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=25128#M25128
LabVIEW Champion . Do more with less code and in less time .

HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

See #5
Step by Step to fix your Mac

How to copy RKF and to change the techincal name ?

Similar Messages

Maybe you are looking for