How to copy the targets..

Hi Experts ,
    i want to copy the objects (i.e Cubes , DSO's , Transformations and DTP's ).
for Ex: Reporting cube---->Cube>DSO---->DSO
this is the flow so we want to maintain the same copy of the flow . how i can copy the same flow ,its include transformations and DTP's...
please advice me .
Advance Thanks
Regards
guttireddy

Hi,
Have a look at these threads:
However, in 7.3 version you can do it:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80579498-cdf0-2d10-d9bf-e7f682adebc5?QuickLink=index&overridelayout=true
And here, you can find what's new in 7.3:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304444f7-e02d-2d10-9c97-d5e3ecf09882?QuickLink=index&overridelayout=true
Regards,
Güneş

Similar Messages

  • How to copy the same address for multiple contacts in Address Book?

    Hi! I got a question, I didn't find an answer for yet.
    How to copy the post address from one contact to another, without manual entering. I mean if I have one contact with already entered post address, can I just copy it someway at once to another contact?
    I don't want cards to merge, I need separate contacts, that may have different phones, e-mails, but the same post address. Please, advise.

    Thanks! yes, this is a solution I'm following now. But I was wondering about the similar way as it is made in Daylite or Contactizer - you create company with name and post address first, and then can create a contact for that company. And company name and post address will appear in contact name.
    I just wonder why such a simple and useful solution isn't available in Address Book as default.
    I know there are many scripts written for Address Book. Maybe there is something for this purpose?

  • I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything.

    I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything. Thanks for the info. on changing it.

    Format is found in the Erase Tab:
    The Disk Image is found on the Restore Tab:

  • How to copy the java concurren program in oracle application

    Hi All
    I am working in oracle Apps R12.
    In AP (Account Analysis Report) is registered as java concurrent Program.
    Now i need to customize this concurrent program and add two new column and two parameter in that.
    Could any one pls provide me the steps that how to copy the Java concurrent,and make a new customized program.
    Whether copying a java concurrent program is same as cp registered as oracle report.
    Thanks & Regards
    Srikkanth

    Hi Sir,
    Thanks for your reply.
    I have find the xml file form data definition and in that they have written Sql query and they have called a Package.
    And the i have also taken the class file from the path as mentioned.
    Now i need to customize this report by adding two parameter and i need to add two new column to display in the rtf.
    Can you pls tell me the steps to copy or how to customize this report.
    Regards
    Srikkanth

  • How to specify the target name while deploying a code in OSB-- Plz Help

    Hi all,
    Am working in creating a cluster environment. For my testing i created a new managed server(OSB_Server) in 9001 port in the admin console itself and that server started running. The default managed server(Admin_Server) is in 7001 port. So when i deploy a code in 7001 sb console the WSDL gets exposed in 7001 because the default admin server port is 7001. While deploying a code in service bus admin console we are not specifying the target name. So how to specify the target name while deploying the code in service bus admin console. Plz help me.
    Regards
    Prabhu

    Hi Prabhu,
    There are three kind of server architecture possible for OSB -
    1. Single server - Everything gets deployed on Admin server itself
    2. Admin Server + Single Managed Server for OSB -- OSB configuration gets deployed on OSB managed server. OSB resources (proxy service, WSDL, Schema) will remain available on OSB managed server port only and NOT on admin server port
    3. Admin Server + OSB cluster -- OSB configuration gets deployed on OSB cluster. OSB resources (proxy service, WSDL, Schema) will remain available on OSB Cluster port(s) only and NOT on admin server port
    Converting one type of server architecture to any other type, requires a manual tedious process, so it is suggested that you create domain accordingly i.e. if you need clusters then while creating domain itself, create OSB cluster, so that all OSB applications gets deployed to OSB cluster. I will suggest you to create a clustered domain from scratch and import the configuration from your existing domian to this new clustered domain.
    You may refer-
    http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15022/toc.htm
    Regards,
    Anuj

  • How to copy the payload from onMessage Activity in BPEL interface

    Hi All,
    how to copy the payload from onMessage Activity in BPEL interface when it is there at the starting of the process and when clicking on the OnMessage Activity
    i'm able to see the View XML Document link. By Clicking on View XML Document Payload is getting opened for me but at this point i'm not able to copy the payload and more over the scroll bar is also not there.
    When i'm saving it as .xml i'm able to see the payload but not in an xml format.
    When trying the payload in SOAPUI it's not getting reformatted.
    How can we solve the issue.
    Regards,
    CH

    The input payload can be seen from "Audit Trail" tab and "Flow" tab of any BPEL instance. The XML shown in "Flow" tab are not rightly formatted XMLs and you may not able to copy them "as is" to a text editor. But, the XML shown in "Audit Trail" should be in the right XML format and you should be able to click on any audit trail entry and copy the XML payload to a text editor. soapUI should also be able to format such XMLs without any issue. Just make sure that you don't overwrite soap header/body section when pasting to soapUI request.

  • How to specify the target for a command button action?

    Hi can anybody explain how to achieve the target feature, i mean i need to display the result of the action in a different window after clicking on the button. Is there anyway to achieve this?
    I want to click the button using Javascript.(using button.click event).
    Thanks in advance

    Thanks for the reply Stas, but it is not the solution I wanted. I want display the result of that action into a different frame of the window. As we have target attribute of the anchor tag in HTML. The target attribute of the h:CommandLink is not working. I tried that.
    Anyway thanks again.

  • How to make the TARGET of clone stamp 2 simultaneous layers?

    Does anyone know how to make the TARGET of the clone stamp, multiple simultaneous layers? Or maybe more accurately, how to clone stamp the top layer and have the layer underneath doing the exact same cloning simultaneously. Or maybe a workaround? I've tried linking the layers, and multiple layer selection with no joy.
    Here is what I'm trying to do. I'm duplicating a layer, then applying LucisArt to one of the layers to greatly exaggerate local contrast. Though I'm not using LucisArt as the final, I want to use it to assist in smoothing blotchy skies, banding, and finding hidden camera sensor dust spots.
    I want to clone stamp on the LucisArt layer so I can watch my progress, but also have the underlying layer doing the exact clone stamping at the same time. Thanks ... Aaron

    Thanks everyone.
    Dennis, You are correct. I know how to selectively apply the LucisArt filter, that's not what I'm looking for. I want my end result to have NO LucisArt effect at all. I'm trying to use the LucisArt layer to drastically exaggerate flaws such as camera sensor dust, AND I want to correct these flaws on the LucisArt layer where they are obvious. The LucisArt layer is only for reference. But the trick is to get CS3 to do to the non LucisArt layer, exactly what I did to the LucisArt layer.
    So imagine I have this otherwise nice photo, but the photographer (this happened) had an amazingly dirty sensor. Half of the dust spots I can hardly see, but the client wants it super clean. So I duplicate the layer so I have two exactly the same. I then apply a strong LucisArt filter the top layer which reveals all the spots including many I couldn't see on the original layer. I'd like to fix all these spots with the clone stamp tool on the LucisArt layer where I can see them easily, then toss that layer. The original below would have all those spots fixed, but sampled from it's own layer and stamped to it's own layer.
    As it is, I can click the LucisArt layer on, place my finger on the spot, then turn that layer off and hopefully see the spot and remove it from the layer underneath. Very tedious indeed.
    ... Aaron

  • How  to  copy  the  table1selected  records into table 2 in webdynpro java.

    Hi 
           how  to  copy  the  table1selected  records into table 2 in webdynpro java.
    venkat
    Edited by: venkatpvr on Sep 23, 2011 11:53 AM

    Hi Venkat,
    You have 2 Value Nodes one for Table1 and second for Table2.
    Table1 node having one more Value Attribute i.e check Box data type is Boolean. Now you are requirement are select records from Table1 Node and click on One Method that records will moves to Second Table2 Node.
    Create One Method for getting the Records from 1-Table to 2-Table
    CopytoTable2 ()
    In this method you have to write code like this
    If (wdContext.nodeTable1.Checkbox(true))
    If(1. Check the Table1 Value Node Size()>0)
    Get the Table1 records and set to table2 Value node.
    Else
    Please select check box// Error message
    Hope this helps!!
    Regards
    Vijay K

  • How to copy the  positions and their relationships of one org.unit to other

    f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them  which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

    Hi.
    This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
    Hope this helps

  • How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?

    Hi friends,
    How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?
    Will all the relevant objects will be copied ? or we need to copy one by one ?
    Do we need to create separate SWCV ?

    Thanks , Then the namespaces defined in copying object will automaticaly change  to copied object namespace?
    do we need to do anthing in SLD ?
    Normally , predeliverd contents are uneditable right ? when we are copying all , will they allow to change the scenarios and BPM  objects , like message type and interface type , mapping etc ?

  • How to copy the function group

    hi there,
    i want to copy the function group 2012. plz let me know the possibility.

    use FM <b>RS_FUNCTION_POOL_COPY</b>  to copy
    Look at this thread
    how to copy the function group

  • How to copy the content in XMLtype column between databases

    Hi, there,
    Does anyone know how to copy the content in XMLtype clumn between databases? I tried insert as select via database link and it gives me the following message:
    SQL> insert into nrt_ot_request_temp (SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML )
    2 select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia;
    select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia
    ERROR at line 2:
    ORA-00942: table or view does not exist
    Thanks,
    Jessica

    Hi Jessica,
    in my eyes the second statement
    select ... xmlstring_column ... from table@remote_side;
    causes the error. Columns of type XMLString internally are stored as CLOBs in Oracle. Unfortunately there are restrictions on statements for CLOBs and remote locators.
    It seems you cannot say
    SELECT clob_column FROM table@remote_site;
    Remark: For me this is a showstopper for the datatype XMLString if you cannot run a simple statement like this one. It seems you can do an insert and an update but no select.
    On the other hand your first statement
    INSERT INTO table_local SELECT * FROM table@remote_site;
    should work following the documentation.
    See also
    http://docs.oracle.com/cd_a97630/appdev.920/a96591/adl04mng.htm#98328
    Best regards
    Indu Keilitz

  • How to copy the output of procedure to a view or table

    Hi...
    I created a procedure using Hana Studio and it returns the multiple rows as output.
    My query is , how to copy the output to a table or view when it is called like this "cal _SYS_BIC.procedureName "
    Please go through the following image:
    How to copy the output content to a table or view....
    Thank u...

    Hi Mohan,
    The logic is like, you can attach a view(so called column view) to any procedure which returns a result set. SO, instead of calling the procedure using CALL statement, you can simply query the VIEW to get the result set. Internally the procedure will be executed.
    Have a look here :
    http://help.sap.com/hana/SAP_HANA_SQL_Script_Reference_en.pdf
    Eg :
    You create a procedure using a result view ProcView to return its results.
    CREATE PROCEDURE ProcWithResultView(IN id INT, OUT o1 CUSTOMER) LANGUAGE SQLSCRIPT
    READS SQL DATA WITH RESULT VIEW ProcView
    AS
    BEGIN
    o1 = SELECT * FROM CUSTOMER WHERE CUST_ID = :id;
    END;
    You call this procedure from an SQL statement as follows.
    SELECT * FROM ProcView WITH PARAMETERS ('placeholder' = ('$$id$$', '5'));
    Hope this helps you to solve the issue
    Sreehari

  • How to copy the photo with file name at window 7 and search specific one in iphone 4s?

    How to copy the photo with file name at window 7 and search specific one in iphone 4s?

    Clendenen02 wrote:
    2) It would be equally helpful if there was something that would take the name of the picture file and spotlight comment, copy and paste it to a movie file's comments with the same name but obviously has different extention. For an example
    In a Pictures folder
    Name: Dark Knight, The.jpeg       Comment: (2008) Genre: Action...             <- copy comment
    In a Movie Folder
    Name: Dark Knight, The.m4v       Comment:                                               <- paste 
    and do this for all 700 files
    This Bash script will do it.
    Edit "PicDir" and "MovDir" to the location of your Folders
    (Note: The comment is written to the m4v file using xattr, so the Spotlight comment field appears blank in Finder, but the comment metadata is still indexed by Spotlight (If you add a Spotlight comment from Finder, it is stored both as an extended attribute and in a .DS_Store file)
    #!/bin/bash
    PicDir=$HOME/Desktop/Pictures
    MovDir=$HOME/Desktop/Movies
    for f in $PicDir/*
    do
         if [ ! -d "$f" -a "${f##*.}" == "jpeg" ]; then
              comment=$(mdls -raw -name kMDItemFinderComment "$f")
              if [[ $comment != "(null)" ]]; then
                   picname=${f##*/}
                   movname=${picname%.*}.m4v
                   if [ -e "$MovDir"/$movname ]; then
                         xattr -w com.apple.metadata:kMDItemFinderComment "\"$comment\"" "$MovDir"/$movname
                   fi
              fi
         fi
    done

Maybe you are looking for