How to copy the XY graph on labview front panel and insert into Excel using labview
Hi all,
The XY graph display on LV front panel after test. How can I copy this XY graph and insert into excel file?
Thank you very much for your help.
Khanh
KPRO wrote:
Hi,
I refer to insert it into excel since report is in excel format, but if it's too hard to do so I can save it in another format.
Either way, will labview support this? Anyway, thank you very much for your quick reply.
Khanh
You are already using the Report Generation Toolkit? There is the "Append Control Image to Report.vi" that would make this easy.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
SFC label not readable how to copy the data to new SFC in panel product
We have one SFC label that is not readable. We know the serial number but how to re-label the product with new SFC and copy the data from the previous one?
Problem is that the SFC is for panel product with three locations and all locations have assembly and NC data.
Any ideas?I would suggest to test using the SFC Reassignment activity or Re-label activities.
-
Since Labview ver 8.0 and later, I am not very happy with the new way the project installer is managing the additional drivers such as Serial.
With LV 7.11 the serial components was included in the cab file and was installed on the target computer in a specific directory. The size of the distribution was pretty small and well suited for compact distribution.
My LV application use only the serial object and with LV 8.21, if I include the serial 3.2 component, I get an enormus file including max, visa ... and a lot of fucky component I do not need.
To distribute my application, I just need, the runtime engine and the serial driver as it was with the version 7.XX
Looking for clever advises from you gentlemen!Thanks Dennis for you input
My problem is in fact very simple. 3 years ago, I developped a software suite for X ray generator; My company is selling such generator all over the world and our control panel software and DLL (for OEM integrator) is based on Labview professionnal development plateform.
To drive our generator, we just need to transfer ascii data using the strandard RS232 port still present on most of equipments used in the industrial area.
Until LV version 7.11, there was no problem to include serial component in my distribution with a very reasonable size and transparency for the end user.
with LV 8.xx (preparing a new release), I'm very disapointed to see, my distribution is increased of about for 10 Mo to 180 Mo just because I increase the serial component.
May I mix a previous version of the serial component with LV 8.21?
Should I change my source to Visa instruction only and merge visa runtime only to my distribution?
is there any simple serial example based on visa and distributed with th application builder?
I will appreciate your help in order to optimize my distribution
Pascal -
Hi,
We have to get all the claims providers associated with a web application and its identity claim encoding type using API.
For example:
If the identity claim of windows authentication is user name and the user name is a string, then we should get
"i:0#.w".
If the identity claim of forms authentication is
email and the provider name is "fba" , then we should get "i:0!.f|fba|".
The below link shows us to get all claims providers associated with a web application, but how do we get the identity claim encoding type of each provider?
http://msdn.microsoft.com/en-us/library/gg650432(v=office.14).aspx#SP_WCP_Tip3
using (SPSite theSite = new SPSite("http://someContosoUrl"))
// Get the web application.
SPWebApplication wa = theSite.WebApplication;
// Get the zone for the site.
SPUrlZone theZone = theSite.Zone;
// Get the settings that are associated with the zone.
SPIisSettings theSettings = wa.GetIisSettingsWithFallback(theZone);
// Get the list of authentication providers that are associated with the zone.
foreach (SPAuthenticationProvider prov in
theSettings.ClaimsAuthenticationProviders)
{ // Need to get the identity claims encoding type using the SPAuthenticationProvider
Is windows authentication's identity claim encoding type always i.0#.w or the identity claim is always the user name?
Thanks & Regards,
Kalai.If the requirement is to be able to convert claim identities to windows identities that can be used with other LOB/legacy application that still relies on NTLM/Windows Auth, then I would recommend to explore C2WTS.
Here are some references:
http://msdn.microsoft.com/en-us/library/office/ee539739(v=office.14).aspx
http://blah.winsmarts.com/2013-11-Use_C2WTS_to_get_a_classic_windows_identity_from_a_claims_identity.aspx
http://henrymcclain.blogspot.in/2013/05/claims-to-windows-token-service-c2wts.html
http://blogs.msdn.com/b/rodneyviana/archive/2011/02/20/claims-to-windows-token-service-c2wts-may-not-start-automatically-when-you-reboot-your-server-don-t-blame-sharepoint-for-that.aspx
http://blogs.msdn.com/b/russmax/archive/2010/05/27/understanding-sharepoint-2010-claims-authentication.aspx
Thanks!
These postings are provided "AS IS" with no warranties, and confers no rights. -
How to copy the same address for multiple contacts in Address Book?
Hi! I got a question, I didn't find an answer for yet.
How to copy the post address from one contact to another, without manual entering. I mean if I have one contact with already entered post address, can I just copy it someway at once to another contact?
I don't want cards to merge, I need separate contacts, that may have different phones, e-mails, but the same post address. Please, advise.Thanks! yes, this is a solution I'm following now. But I was wondering about the similar way as it is made in Daylite or Contactizer - you create company with name and post address first, and then can create a contact for that company. And company name and post address will appear in contact name.
I just wonder why such a simple and useful solution isn't available in Address Book as default.
I know there are many scripts written for Address Book. Maybe there is something for this purpose? -
I am trying to find out how to copy the image on my existing hard drive to my new hard drive before I install it so it will be like I didn't do anything. Thanks for the info. on changing it.
Format is found in the Erase Tab:
The Disk Image is found on the Restore Tab: -
How to copy the java concurren program in oracle application
Hi All
I am working in oracle Apps R12.
In AP (Account Analysis Report) is registered as java concurrent Program.
Now i need to customize this concurrent program and add two new column and two parameter in that.
Could any one pls provide me the steps that how to copy the Java concurrent,and make a new customized program.
Whether copying a java concurrent program is same as cp registered as oracle report.
Thanks & Regards
SrikkanthHi Sir,
Thanks for your reply.
I have find the xml file form data definition and in that they have written Sql query and they have called a Package.
And the i have also taken the class file from the path as mentioned.
Now i need to customize this report by adding two parameter and i need to add two new column to display in the rtf.
Can you pls tell me the steps to copy or how to customize this report.
Regards
Srikkanth -
How to copy the payload from onMessage Activity in BPEL interface
Hi All,
how to copy the payload from onMessage Activity in BPEL interface when it is there at the starting of the process and when clicking on the OnMessage Activity
i'm able to see the View XML Document link. By Clicking on View XML Document Payload is getting opened for me but at this point i'm not able to copy the payload and more over the scroll bar is also not there.
When i'm saving it as .xml i'm able to see the payload but not in an xml format.
When trying the payload in SOAPUI it's not getting reformatted.
How can we solve the issue.
Regards,
CHThe input payload can be seen from "Audit Trail" tab and "Flow" tab of any BPEL instance. The XML shown in "Flow" tab are not rightly formatted XMLs and you may not able to copy them "as is" to a text editor. But, the XML shown in "Audit Trail" should be in the right XML format and you should be able to click on any audit trail entry and copy the XML payload to a text editor. soapUI should also be able to format such XMLs without any issue. Just make sure that you don't overwrite soap header/body section when pasting to soapUI request.
-
How to copy the table1selected records into table 2 in webdynpro java.
Hi
how to copy the table1selected records into table 2 in webdynpro java.
venkat
Edited by: venkatpvr on Sep 23, 2011 11:53 AMHi Venkat,
You have 2 Value Nodes one for Table1 and second for Table2.
Table1 node having one more Value Attribute i.e check Box data type is Boolean. Now you are requirement are select records from Table1 Node and click on One Method that records will moves to Second Table2 Node.
Create One Method for getting the Records from 1-Table to 2-Table
CopytoTable2 ()
In this method you have to write code like this
If (wdContext.nodeTable1.Checkbox(true))
If(1. Check the Table1 Value Node Size()>0)
Get the Table1 records and set to table2 Value node.
Else
Please select check box// Error message
Hope this helps!!
Regards
Vijay K -
How to copy the positions and their relationships of one org.unit to other
f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.
Hi.
This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
Hope this helps -
How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?
Hi friends,
How to copy the predeliverd XI Scenarios and interfaces to our SWCV ?
Will all the relevant objects will be copied ? or we need to copy one by one ?
Do we need to create separate SWCV ?Thanks , Then the namespaces defined in copying object will automaticaly change to copied object namespace?
do we need to do anthing in SLD ?
Normally , predeliverd contents are uneditable right ? when we are copying all , will they allow to change the scenarios and BPM objects , like message type and interface type , mapping etc ? -
How to copy the function group
hi there,
i want to copy the function group 2012. plz let me know the possibility.use FM <b>RS_FUNCTION_POOL_COPY</b> to copy
Look at this thread
how to copy the function group -
How to copy the content in XMLtype column between databases
Hi, there,
Does anyone know how to copy the content in XMLtype clumn between databases? I tried insert as select via database link and it gives me the following message:
SQL> insert into nrt_ot_request_temp (SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML )
2 select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia;
select SR_ID, SR_VERSION, ITEM_NUMBER, COMMON_XML, REQUEST_XML from nrt_ot_request@nrtdb_acacia
ERROR at line 2:
ORA-00942: table or view does not exist
Thanks,
JessicaHi Jessica,
in my eyes the second statement
select ... xmlstring_column ... from table@remote_side;
causes the error. Columns of type XMLString internally are stored as CLOBs in Oracle. Unfortunately there are restrictions on statements for CLOBs and remote locators.
It seems you cannot say
SELECT clob_column FROM table@remote_site;
Remark: For me this is a showstopper for the datatype XMLString if you cannot run a simple statement like this one. It seems you can do an insert and an update but no select.
On the other hand your first statement
INSERT INTO table_local SELECT * FROM table@remote_site;
should work following the documentation.
See also
http://docs.oracle.com/cd_a97630/appdev.920/a96591/adl04mng.htm#98328
Best regards
Indu Keilitz -
How to copy the output of procedure to a view or table
Hi...
I created a procedure using Hana Studio and it returns the multiple rows as output.
My query is , how to copy the output to a table or view when it is called like this "cal _SYS_BIC.procedureName "
Please go through the following image:
How to copy the output content to a table or view....
Thank u...Hi Mohan,
The logic is like, you can attach a view(so called column view) to any procedure which returns a result set. SO, instead of calling the procedure using CALL statement, you can simply query the VIEW to get the result set. Internally the procedure will be executed.
Have a look here :
http://help.sap.com/hana/SAP_HANA_SQL_Script_Reference_en.pdf
Eg :
You create a procedure using a result view ProcView to return its results.
CREATE PROCEDURE ProcWithResultView(IN id INT, OUT o1 CUSTOMER) LANGUAGE SQLSCRIPT
READS SQL DATA WITH RESULT VIEW ProcView
AS
BEGIN
o1 = SELECT * FROM CUSTOMER WHERE CUST_ID = :id;
END;
You call this procedure from an SQL statement as follows.
SELECT * FROM ProcView WITH PARAMETERS ('placeholder' = ('$$id$$', '5'));
Hope this helps you to solve the issue
Sreehari -
How to write the data into EEPROM using Labview?
How to write the data into EEPROM using Labview?
You would need some sort of EEPROM programmer. Typically might
communicate with it via serial. I don't know how you would do this in
LV. You would need to have the command protocol for the programming
device to start with.
Doug De Clue
gpibssx wrote in message news:<[email protected]>...
> How to write the data into EEPROM using Labview?
Maybe you are looking for
-
I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem: - Some, but not all, podcasts existing on the iPod no longer appear in iTunes; this, after normal behavior for more than a year since purchase
-
Pull-out tab and swipe: conflict
hello everybody When you're on article X, How can you swipe horizontally to the next article Y when you have a pull out tab that take the WHOLE page X ? I'm stuck in navigation !
-
Hi,I'm looking into the fail-over solution for our Essbase server. I'm currently looking at EDS's clustering solution. Could you please share your experience with it if any of you as it implemented? Also, I'm wondering if there are anyone who was suc
-
And I tried to change it back but it said the game centre name is already in use.
-
AP Extreme won't find Linksys network - aka Mooching off my neighbor
There is an unprotected wireless network in my neighborhood. WHen I set down a windows XP laptop it finds it and automatically connects, no password reqiuired. I can not get my mac to see this network with it's WiFi (airport) card, which is supposedl