How to copy .vmg files to phone from pc?

Hi. My phone is a N73. Before performing a hard reset on my phone (I had to for some reason), I copied all my sms messages from Inbox, Sent Items, Drafts and Outbox to my pc using Nokia PC Suite. Now I want to restore those messages to phone again. I simply tried to copy and paste those to the corresponding folders on my phone, but the 'paste' option is disabled. I am out of any clues how to deal with this issue. Please anybody tell me how to do this? Thanks.

hello
my first post you can copy the message (drag and drop the vmg) in to 'my folders in nokia communication center,
then in the phone you go to my folder where all the imported messages will be and do options mark all and move to inbox.
it worked with a 5800 but i presume that any phone is the same
it worked from messages coming from a sony ericsson. so not sms related as long as it is in vmg.
cheers.

Similar Messages

How to copy configuration files to and from the cisco ios routers that use SNMP

Hello,
I went on the page : https://supportforums.cisco.com/docs/DOC-1860
You explain how to get a config file and send it to a tftp server or oppositely.
I face this problem:
id090365:~> snmpset -v2c -c communitystring hostipaddress .1.3.6.1.4.1.9.9.96.1.1.1.1.2.98 i 1
Error in packet.
Reason: noCreation (That table does not support row creation or that object can not ever be created)
Failed object: SNMPv2-SMI::enterprises.9.9.96.1.1.1.1.2.98
Do you have any idea?
Thanks,
Olivier

I hadn't seen any snmp guides using snmpv3 and scp as transport protocol. For those looking to implement, here is what worked for me.
As with the other snmp config copy guides you will need to download the respective MIBS and load them in the snmp.conf file.
This post will specifically cover the snmpset commands for a v3 setup.
SNMP Environment:
Name        : net-snmp
Version     : 5.7.2
Release     : 17.fc20
snmp conf file in ~/.snmp/snmp.conf
   contains
defSecurityName XXX <- replace with v3 username
defContext ""
defAuthType SHA
defPrivType AES
defSecurityLevel authPriv
defAuthPassphrase ***** <-replace with authentication pass
defPrivPassphrase ***** <-replace with encryption pass
defVersion 3
showMibErrors no
mibs ALL
I would verify basic snmpv3 functionality with a snmpwalk of something simple like sysUpTime. When that's good proceed to the CONFIG-COPY snmp commands.
This is my bash script that does the entire copy asking only for a single argument of IP/Hostname of the device being backed up. The 2>/dev/null shown in the script or at the cli below redirects STDERR to null to avoid the MIB modules parsing errors.
#!/usr/bin/bash
DEVICE=$1
RANNUM=42
USER=******
PASS=******
SERVER=X.X.X.X
DATE=$(date +"%m_%d_%y")
snmpset $DEVICE ccCopyProtocol.$RANNUM i 4 ccCopySourceFileType.$RANNUM i 4 ccCopyDestFileType.$RANNUM i 1 ccCopyServerAddress.$RANNUM a "$SERVER" ccCopyFileName.$RANNUM s "$DEVICE.$DATE" ccCopyUserName.$RANNUM s $USER ccCopyUserPassword.$RANNUM s $PASS ccCopyEntryRowStatus.$RANNUM i 4 2>/dev/null
Once run you can check the status of the copy with the following command.
[root@localhost hlsb]# snmpwalk sbs-tech-switch ciscoConfigCopyMIB 2>/dev/null
CISCO-CONFIG-COPY-MIB::ccCopyProtocol.42 = INTEGER: scp(4)
CISCO-CONFIG-COPY-MIB::ccCopySourceFileType.42 = INTEGER: runningConfig(4)
CISCO-CONFIG-COPY-MIB::ccCopyDestFileType.42 = INTEGER: networkFile(1)
CISCO-CONFIG-COPY-MIB::ccCopyServerAddress.42 = IpAddress: 10.10.10.193
CISCO-CONFIG-COPY-MIB::ccCopyFileName.42 = STRING: sbs-tech-switch.07_09_14
CISCO-CONFIG-COPY-MIB::ccCopyUserName.42 = STRING: XXXX
CISCO-CONFIG-COPY-MIB::ccCopyUserPassword.42 = STRING: XXXX
CISCO-CONFIG-COPY-MIB::ccCopyNotificationOnCompletion.42 = INTEGER: false(2)
CISCO-CONFIG-COPY-MIB::ccCopyState.42 = INTEGER: successful(3)
CISCO-CONFIG-COPY-MIB::ccCopyTimeStarted.42 = Timeticks: (52270199) 6 days, 1:11:41.99
CISCO-CONFIG-COPY-MIB::ccCopyTimeCompleted.42 = Timeticks: (52270339) 6 days, 1:11:43.39
CISCO-CONFIG-COPY-MIB::ccCopyEntryRowStatus.42 = INTEGER: active(1)
CISCO-CONFIG-COPY-MIB::ccCopyServerAddressType.42 = INTEGER: ipv4(1)
CISCO-CONFIG-COPY-MIB::ccCopyServerAddressRev1.42 = STRING: "10.10.10.193"
After the successful copy completes the entry will exist for five minutes allowing for no further requests to be made with that particular random number. To send another request prior to the five minute clearing of the table send a "destroy" snmpset to clear the entry.
[root@localhost hlse]# snmpset sbs-tech-switch CISCO-CONFIG-COPY-MIB::ccCopyEntryRowStatus.42 i 6 2>/dev/null
CISCO-CONFIG-COPY-MIB::ccCopyEntryRowStatus.42 = INTEGER: destroy(6)
Hope this will save some time for those looking to implement a more secure snmp config copy setup.
V/R
Cody Hartley

How can I send files via Bluetook from my Tour to other phones?

How can I send files via Bluetook from my Tour to other phones?
I have even been able to pair to the other device, but I don't see the option to send/copy/move files through Bluetooth.
I can only send my Address book via bluetooth.
Please help!!

Hi and Welcome to the Community!
See this KB:
KB05409 Transfer a file using Bluetooth technology between two BlackBerry smartphones
Substitute, in the KB, the appropriate instructions for your other device in place of the KB section for the receiving device. Be aware that RIM only supports BT file transfer between BBs...with other devices is technically unsupported. But, it usually works, as long as the two devices are paired, trusted to each other, and each have all of the correct BT services enabled for the configuration of the other device.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to copy a file from one folder to another folder in Linux

Hello everyone,
Oracle forms 11g 11.1.2.0.0
OS: Oracle Linux
We use webutil to upload files to the application server from the client machine, and stores them in a folder named JOB_DOCS on the application server (This folder is created as a databse directory too). File types are JPEG, GIF, PDF, TXT, BMP, DOC, XLS etc...
At a later stage when the user tries to view the uploaded documents, this was not getting displayed on the screen
on our windows server, when the user clicks on the print button we copy the file from the JOB_DOCS folder to the forms\java folder using the below command
HOST('COPY ' ||d:\JOB_DOCS\test.pdf||' '||'c:\oracle\middleware\as\forms\java\test.pdf ,NO_SCREEN);
once the file is under the forms\java folder then it is getting displayed on the screen to print or save, and later we remove the file from forms\java folder.
But my problem here is, recently we have installed our application on Oracle Linux server, and we have JOB_DOCS folder there, and the users can upload files to this folder also. How can we copy the file test.pdf from JOB_DOCS to forms/java in linux?
And what could be the reson for the document cannot be accessed from the folder where it is saved? We tried giving folder permissions, adding the folder to PATH variable etc.

For copying and moving directories you can use the cp and mv commands just like you use them with files. Yeah, I know. If you've already tried to copy a directory with cp, you've probably noticed that cp just complains at you. Probably it says something like cp: omitting directory yadda yadda. You see, the cp command wants you to use the -r option if you want to copy a directory with its contents. The -r means "copy recursively":
$ cp -r dir1 dir2
The above creates a directory named dir2 whose contents will be identical to dir1. However, if dir2 already exists, nothing will be overwritten: the directory dir1 will be copied into the dir2 directory under the name dir2/dir1.
When renaming directories, you use the mv command exactly the same way as with files:
$ mv dir1 dir2
When dealing with directories, mv works a bit like cp does. If dir2 doesn't exist, the above will rename dir1 to dir2, but if dir2 exists, the directory dir1 will be moved into the dir2 directory under the name dir2/dir1.
ref http://www.tuxfiles.org/linuxhelp/dirman.html

Does anyone know how to copy my files from my ipod to a different computer?

Does anyone know how to copy my files from my ipod to a different computer? I tried to do it, but all that it did was erase my files. What i want to to is use my ipod to transfer my files to another computer (which has itunes as well) PLEASE help!

You will need to enable your iPod for disk use. Then, you should see your iPod in "My Computer" and you can open up your iPod's folder there and drag the files into it. You can store the files on the iPod, then connect it to the other computer and drag-and-drop them from the iPod into the designated directory in that computer. Make sure individual files are not larger than 4 GB.

How to copy pdf files from computer to ipad

how to copy pdf files from computer to ipad

You can PDFs to the iPad, but first you need one or more apps on the iPad that supports PDFs - unlike a 'normal' computer the iPad doesn't have a file system, and everything on it has to be associated with an app.
Options include free apps such as Apple's iBooks app and also Adobe Reader - and paid-for apps such as GoodReader (which also supports read-only of other documents types).
For iBooks you can first add the PDFs to your computer's iTunes via File > Add To Library, and you can then sync them by selecting the iPad on the left-hand sidebar of your computer's iTunes (on iTunes 11 you can enable the sidebar via option-command-S on a Mac, control-S on a PC) and using the Books tab on the right-hand side to select and sync them.
For Adobe Reader adnd GoodReader you can use the file sharing on the Apps tab on the right-hand side to copy them over : http://support.apple.com/kb/ht4094

New user...how do you drag or move or copy a file or folder from the desktop to an external drive? I have tried dragging and copy/pasting.

new user...how do you drag or move or copy a file or folder from the desktop to an external drive? I have tried dragging and copy/pasting.

My guess the problem you are running into is the drive is formatted for a PC as NTFS. OS X can read files from NTFS however it cannot write to it. Check the formatting on the drive, if it's NTFS then it should be reformatted to Mac OS Extended (Journaled), you can use Disk Utility to do this.
If you still have a PC and want to share the EHD with the PC and Mac please read MacWorld's Share an external drive between a Mac and a PC article.

How to copy a ton of music from a Dell laptop to my Imac?

How to copy a ton of music from a Dell laptop to my Imac?

The easiest method is to use Migration Assistant or you can put all the music onto an External HD, connect the EHD to the iMac, then open iTunes on the Mac and Drag all the files from the EHD to iTunes and let them import. It is extremely simple to do

How to transfer mp3 files to 4s from a PC without itunes?

How to transfer mp3 files to 4s from a PC without itunes?

No can do. Closest you can do is to use iCloud and iTunes Match. Otherwise, for mp3 files you will have to import them to iTunes on the computer and then sync them to the phone.

How do i remove my old phone from my account

How do i remove my old phone from my Apple account and link this new one?

Hi wvhsiws,
If you are having issues after changing your Apple ID, you may find the following articles helpful:
Apple ID: What to do after you change your Apple ID
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
Regards,
- Brenden

How to upload a file in bdc from application server

how to upload a file in bdc from application server

Hi
Check if this is useful and reward.
PERFORM UNIX_UPLOAD.
FORM unix_upload.
DATA : lv_string(600) TYPE c.
lv_string = p_fname. "p_fname is the filename in path
OPEN DATASET lv_string FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
    MESSAGE 'File Not Found' TYPE 'I'.
    LEAVE PROGRAM.
ENDIF.
DO .
    READ DATASET lv_string INTO gs_gfile.
    IF sy-subrc NE 0 .
      EXIT.
    ENDIF.
    APPEND gs_gfile TO gt_gfile .
    CLEAR gs_gfile .
ENDDO.
CLOSE DATASET lv_string.
CLEAR lv_string.
DATA: lc_split TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
LOOP AT gt_gfile INTO gs_gfile .
    SPLIT gs_gfile AT lc_split INTO
                                   gs_ipfile-field1
                                   gs_ipfile-field2.
ENDLOOP.
ENDFORM.                    "unix_upload
here gs_ipfile is the same structure as your input file to upload
and
gs_gfile is the work area of the internal table containing characters as :
TYPES : BEGIN OF ygs_gfile    ,
          data(600)             ,
         END OF    ygs_gfile    .
*Internal table declaration for input file as text
gt_gfile   TYPE STANDARD TABLE OF ygs_gfile INITIAL SIZE 0 ,
*Work area declaration for input file
       gs_gfile   TYPE ygs_gfile                                   .
Thanks and Regards
A Swarna

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and p

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

How did my pdf files get converted from 'open with Adobe Reader' to open with Adobe Acobat'? And if I have a ''free'' Acrobat account why does it not open? When I do click on the account it ask me to pay $89.99. I never wanted Acrobat. How can I get -

How did my stored files get converted from 'open with Adobe READER' to 'open with Adobe ACROBAT'? How can I get them re-set to open with 'Adobe Reader'?
Please reply to my e-mail: [email protected]

It sounds as if you downloaded Adobe Acrobat Pro. If you did, uninstall it. Then repair Adobe Reader.
The free Acrobat account has no connection to any of this.

How do I transfer files and data from my Samsung Galaxy tab 2 to my Macbook Air?

How do I transfer files and data from my Samsung Galaxy tab 2 to my Macbook Air? The Macbook does not even recognize the device. I get an error message. I follow the instructions on the message, which tells me to install "Kies" and Android file transfer. This does not help. What do I do?

See:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

How do I transfer files and pictures from my blackberry to my mac

how do I transfer files and pictures from my blackberry to my mac. My mac does not seem to recognize my blackberry as a devise

Sounds like a question for Blackberry.
Check your manual or the Blackberry support site, or Google.

How to copy .vmg files to phone from pc?

Similar Messages

Maybe you are looking for