How to correct bad PAB addresses that route through old GWIA

Old system was GW 7.x on NetWare 6.5 servers.
New system is GW 8.0.2HP2 on Windows 2008 servers.
We moved to new hardware, etc. when we upgraded to GW 8. It's time to turn off the old GWIA but I find that many people have saved addresses (I assume mostly in Frequent Contacts) that route messages through our old GWIA. Doing a grep search of the old GWIA logs on the term "sender" is how I know this is still how these messages are flowing.
Anyway, for example, there is a user that sends messages to his VP and that VP's address shows to be "Firstname Lastname ("[email protected]@etmc.org) in the properties of the message. With the old GWIA off messages to this address remain in Pending status. Turn the old GWIA back on and the message goes on through.
Does the GWCheck PABFix option correct these stored addresses in personal address books, or is there another way, or any way at all?
TIA
Steve

I just had this problem after upgrading to 2012. An old utility (gwpabasr.exe) saved the day. You can find it in the file finder on the download site. Yes, it is OLD but it worked. Just be careful of the location of the gwpabasr.sri. It looks for it in the local windowsa directory. I know I am late to post to this request but maybe some else is looking for it.
John
Originally Posted by seschenburg
Old system was GW 7.x on NetWare 6.5 servers.
New system is GW 8.0.2HP2 on Windows 2008 servers.
We moved to new hardware, etc. when we upgraded to GW 8. It's time to turn off the old GWIA but I find that many people have saved addresses (I assume mostly in Frequent Contacts) that route messages through our old GWIA. Doing a grep search of the old GWIA logs on the term "sender" is how I know this is still how these messages are flowing.
Anyway, for example, there is a user that sends messages to his VP and that VP's address shows to be "Firstname Lastname ("[email protected]@etmc.org) in the properties of the message. With the old GWIA off messages to this address remain in Pending status. Turn the old GWIA back on and the message goes on through.
Does the GWCheck PABFix option correct these stored addresses in personal address books, or is there another way, or any way at all?
TIA
Steve

Similar Messages

How do I get rid of a bad email address that keeps popping up

I have a bad email address that keeps popping up as I type in addresses . I've tried contacts, and I can't find it. How do I get rid of it?

Thanks for the answer......I don't like it....not your fault. I do like your cat!

How to correct bad PDF display of Excel 2007 graph-Adobe Pro X?

Just installed Adobe Acrobat Pro X; previously had Adobe Pro 8, which worked fine. Have Excel 2007 files with an Excel graph and a JPG image on the spreadsheet tab. Both the graph and the JPG are too big, are displaced, and hide spreadsheet data, when the Excel file is Saved As a PDF using Adobe Pro dialog or Excel dialog, or the Excel Plug-In to Create PDF. For some strange reason, printing to PDF works, although that is limiting. All of the settings are the same for the Adobe Printer as Adobe Pro settings. Changing them or going to default did not help. Just did the latest update; that did not help.
The graph and JPG are too large for the PDF page. Paper printing from Excel still works fine. Producing a PDF on another machine with Pro 8 still works fine. Could not find this problem discussed anywhere. Using XP, fully patched. This should not be a complicated process, nor a complex spreadsheet. What is going on?
Thanks

Regardless of the method and Adobe product used to create the PDF, including the Excel tool button, the single common factor whether the PDF correctly displays a JPG or graph in the Excel file that is being done at anything other than 100% size is whether the Adobe Printer or a Physical Printer is selected as the default printer in the Windows Printers and Faxes-Settings. This is true even though the printer is not being used. I have created the same PDF using every method/product and the results are always the same, and only properly display when either the setting is 100% size or the system printer is selected as Adobe Printer. This is true only after installing Adobe X (8 was previously installed, and worked as expected).
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
>>> "Bill@VT" <[email protected]> 4/7/2012 7:21 AM >>>
Re: How to correct bad PDF display of Excel 2007 graph-Adobe Pro X? created by Bill@VT ( http://forums.adobe.com/people/Bill%40VT ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4319297#4319297 )
You say the settings for the printer work fine, but do not for PDF Maker (I am assuming this is what you meant). PDF Maker no longer uses the printer and the settings are independent. Check the settings for PDF Maker under the create PDF menu.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4319297#4319297
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4319297#4319297. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

TS3899 How do I change the address that my iphone sends when i send mail. I have deleted the account but it still shows up as the account that will be replyed to if people hit reply.

How do I change the address that my iphone sends when i send mail. I have deleted the account but it still shows up as the account that will be replyed to if people hit reply.

Hey There I didn't need to change it as it shows my correct name in my icloud account. The problem is on my Mac where it still shows my Full name as my partners name.
For eg. if I send an email from "Mail" on mac and I use my icloud account then the name that shows up is my partners name when the email is received. If I send an email from the Icloud Mail box that I log into on my browser then the name that shows up when the email is received is my name which is correct.
When I go into preferences in "Mail" on my Mac to change my name, the name is ghosted out and doesn't allow me to change it ! ? It is here that it still show my partners name ?

How could I update my apps that have my old Apple ID and how could I use face time

How could I update my apps that have my old Apple ID n how could I use face time

I can't help you if you don't know your Apple ID and/or password. You can change your password at: Manage My Apple ID. You will need to know the answers to your security questions. If you don't know those, then see the following:
Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

How to Report bad IP address

Hi,
How do I report a bad IP address, in order to stop it's re-assignment from the dhcp pool?
The IP address I have currently been assigned by BT appears on various IP black lists. For example when accessing the National Lottery site the connection attemp just hangs. A Tracert test gives:
C:\Users\Administrator>tracert www.national-lotter.co.uk
Tracing route to www.national-lotter.co.uk [98.124.198.1]
over a maximum of 30 hops:
1 1 ms <1 ms <1 ms BThomehub.home [192.168.1.254]
2 * * * Request timed out.
3 * 11 ms 10 ms 31.55.185.193
4 11 ms 11 ms 11 ms 31.55.185.192
5 12 ms 11 ms 11 ms core4-hu0-1-0-0.faraday.ukcore.bt.net [195.99.127.50]
6 11 ms 11 ms 11 ms peer1-xe8-1-1.telehouse.ukcore.bt.net [109.159.254.191]
7 14 ms 13 ms 13 ms blackhole.prolexic.com [195.66.224.31]
8 12 ms 12 ms 12 ms unknown.prolexic.com [72.52.60.35]
9 * * * Request timed out.
10 109 ms 109 ms 109 ms unknown.prolexic.com [209.200.160.218]
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
As can be seen the traffic is routed to Prolexic. A company specializing in web site anti DDOS protection. Looks like my IP has been flagged as one used in the past for questionable activities. I understand that by just simply rebooting the modem I'm likely to be assigned another IP, but I want to get this bad IP removed from the pool so it doesn't get re-assigned to someone else. Experience in the past has shown that there is likely to be little success to tiring to get the IP removed from the blacklist at Prolexic's end. That would need more clout than a home user processes.
So how do I report to this bad address to BT ?
Kind Regards
Gary

I would try another reset but disconnect for couple of minutes before reconnecting and that should be enough to get a new IP address
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How can I remove email addresses that are saved in itouch automatically

It seems that every time I send or receive an email, the recipient email address is saved. how do I remove these email addresses. I do not want to keep some of these addresses. I have also found that if I had typed in the email address wrong, this is saved as well and I have no way to correct the wrong address. Your help is appreciated.

Unsync and resync all of your movies from your iPod. You can do this by removing the tick mark next to Sync Movies from under the iPod's Movies configuration tab in iTunes assuming you have your iPod set up for automatic syncing.
To access this tab, plug your iPod in and click on it from under Devices in the left hand pane of iTunes. Over to the right locate the Movies tab along the top. Here you will find the options for how and what movies to sync. Hit the Apply button in the lower right hand corner to sync the updated changes to your device when you remove the retick the option to Sync Movies.
B-rock

Correcting bad email address

When I signed up for cellular data service, I mis-typed my email address. Called AT&T, and they corrected the email address, but my iPad still wants to use the wrong one. It will not let me use the correct the email address--always reverts to the bad one--so I cannot view my account. Any ideas?

what I've read:
1. go to - settings/ general/keyboard/international and then add keyboard pick "Chinese pinyin"
- after you have added it get out of settings go back in through to the keyboard and you can add words. In this case your email
2. Open safari - pretend your email is [email protected] - in safari do a search for fringa (it will autocorrect to fringe) cancel X the auto correct do the search for fringa. That's it, apparently it'll "take"
3. Make sure in settings/mail all the info on your email account is correct, put your email address into you contacts and enable auto-fill w/ your info

How can I errase email address that i already erase from the address book

How can I erase old email addresses that I already erase them from my contacts, and keep appearing on the "TO:" line, when I want to send an email?

Go to Mail menu > window > Previous recipients > where you can delete previous contacts to your heart's delight.
Then, in the same menu > window > Address panel will allow you to remove others by their places in particular groups.
PS Please do not post the same message more than once. It can cause confusion. I have mentioned your previous message to the hosts, who may remove it.

How to create a small field that cycles through a series of images. (using Acrobat Pro)

Using Acrobat Pro, we need to use a small field to track student progress. With successive mouse clicks, the field would cycle through:
-- a number (that identifies an element of study),
-- same number surrounded by a circle (indicates element is assigned to the student),
-- same number with a check mark (indicates element was completed by the student),
-- back to the original number.
This could probably be handled by cycling through a series of small images when the user clicks on the field.
The "Check Box" field allows only a check to be added to the field. It does not allow the circle and does not cycle through multiple states.
The "Text Box" field might allow this capability, but if so we are not able to configure it properly.
Any solutions?   Thanks!

Thanks Michael,
The information at the link you provided enabled us to create a button that cycles through a series of ASCII characters.
This us useful, but we need to cycle through a series of images. A more difficult problem.
FYI, an example of the javascript that cycles through a series of ASCII characters is shown below. (The "else" statement pertaining to a null "" buttonGetCaption state is used to initiate an initial state of "1" for the button when the form is first opened.).
if
(event.target.buttonGetCaption()=="1"+"\u2714") {
    event.target.buttonSetCaption("1");
    event.target.textColor = color.black; }
else if (event.target.buttonGetCaption()=="") {
    event.target.buttonSetCaption("1");
    event.target.textColor = color.black; }
else if (event.target.buttonGetCaption()=="1P") {
    event.target.buttonSetCaption("1"+"\u2714");
    event.target.textColor = color.green; }
else if (event.target.buttonGetCaption()=="1") {
    event.target.buttonSetCaption("1P");
    event.target.textColor = color.red; }
loop
Again, we are still looking for a way to cycle through a series of images so any help with that problem would be appreciated.

I am having a problem with homesharing on my apple tv. The email address on my tv is different than what I am registered with. How do I correct the email address that is being displayed under home sharing on the apple tv?

Somehow my apple id email address under homesharing on my apple tv is different than that used for homesharing on itunes in my imac. I can't access home sharing on my apple tv because of this. Can you please tell me how to change it on the apple tv in order to get homesharing to work?

turn off home sharing on apple tv, then turn it on again, entering new credentials. Apple-TV works very reliably with home sharing unlike iDevices which don't

How do i remove email addresses that have been imported from my email account?

Im not sure how i did it but somehow i have a ton of email addresses in my contacts and I want to remove them....Is there a way to do this without have to remove them one at a time.....I hardly send anyone emails from my contact list and would love to get my list back to just people with phone numbers....
Any suggestions would be greatly appreciated!!!

Select each photo in the smart collection with the missing question mark icon. Use Cmd+Click or Shift+Click on the first and last if they are all in a consecutive block. Then click top left on the Catalog tab and choose All Photographs. Confirm from the information strip (above the filmstrip) that you are in All Photographs and the number of photos you have selected and then use the menu:
Photo >> Remove Photos From Catalog

In Mail, how to delete an email address that automatically comes up as a ch

I have deleted one email address from Address Book, and it is gone in the address book. However when I start an email to this person, that deleted email address still shows up as a choice below the current email address of this person. How do I delete the old email address from this location?
Thanks to someone who can answer this

Eva, I found where the previous recipient information is actually stored, unfortunately I don't have a solution yet though.
Mail's "previous recipients" list is actually stored in ~/Library/Application Support/AddressBook/AddressBook.data. However, as the name suggests this is actually where all your Address Book information is stored. Deleting the file AddressBook.data got rid of my entire Previous Recipients list, unfortunately it deleted my entire Address Book as well. Dragging the file back to the Application Support folder caused every Address Book entry to be duplicated... so I don't recommend this strategy
I reverted to an Address Book backup to set things right again.
So it would appear your mystery addresses are probably in the AddressBook.data file, unfortunately I still don't know how to excise the ones you don't want.

HT1541 How do I remove an address that was typed in wrong when I was gifting an app?

I want to stop the charge for that app. I have sent a gifted app to the correct email address, so do not want to resend it. Can anyone help, as I do not want to be charge for something I cannot use, the email address does not exist!
Thanx

Thanks. I couldn't get the control-click to work, but I found that if I opened a folder and picked "Customize Tool Bar" from "View" in the Finder, I was able to drag the question mark out of the toolbar and onto the desktop where it "poofed' and disappeared. Doing this removed the question mark from the toolbar in all my folders.

My email service recently changed. How do I change the address that my email icon attaches to from the old email to the new email? The icon is the postage stamp on the bottom bar.

My email provider just changed the path to access my email so my "postage stamp" icon still accesses the old non existent email address. How do I remap the icon to access the new email path?

You don't "remap" the icon; it is just an alias to your Mail application.
Open your Mail application, go to Preferences, and then click on Accounts. Call your ISP and, with Accounts open, ask him for the proper settings for you to enter for (or, go to their website and look up the information yourself):
Incoming mail server
user name
password
outgoing mail server
plus all ports (numbers)

How to correct bad PAB addresses that route through old GWIA

Similar Messages

Maybe you are looking for