How to correct incorrect entry date?

Hi,
The scenario is as follows:-
Employees are hired from 01.01.2000
Payroll has run till last month(28.02.2007)
Now, few employees hire date has to be back-dated (01.01.1998)
The following should not happen in the event of the date getting changed.
Should not delete clusters
Payroll should not trigger retro, even if it triggers it has to be controlled
Infotypes 7 and 8 need not be changed, means date can be 01.01.2000
What i did:-
Changed the payroll status
Applied PA41
This is the suggestion offered by library in the event of correcting entry after having run payroll. But, it doesn't work, moreover action types incorrect entry and correct date are not available and library mentions that the action types are not available as it will be used in exceptional circumstances. It allows to change the entry date if i delete the clusters.
Mailing to the forum after having tried several times!
Appreciate the inputs.
Regards
KK

Hello Manoj,
I deleted the "accounted to" and deleted ERA as well.
But when i try to correct the action date, it doesn't allow me to change the date to 01.01.1998. Hope you'd have read my thread precisely!
When i try to correct actions, the action types "incorrect entry" and "correct entries" are missing. Unless, i delete the clusters, it doesn't allow me to change the entry date.
More inputs!
Regards
KK

Similar Messages

Actions- Incorrect Entry Date and Corrected Entry Date

i am going by the link below
http://help.sap.com/saphelp_erp60_sp/helpdata/en/48/35c5a94abf11d18a0f0000e816ae6e/frameset.htm
But I am not able to find "Incorrect Entry Date" and "Corrected Entry Date" Actions anywhere. Not even the drop down of Actions List
Where are they acually?

As said by our Gurus PA41 is used to change the Corrected entry and incorect entry
u can do the same thru PA40 if u select 70 and 71 action types this screens are nothing bu the screens u see in PA41
for ur info

How to correct the birth date in Apple account? How to change the numerals to English for UAE location?

I purchased iPhone 5S and opened new Apple account with preffered language English and location UAE. I was directed to enter my birth date with only Arabic language option. There was no way to change the language or skip the step. I had to enter an arbitrary birth date to go to the next step. How to correct the birth date now and change the numerals to English?

Solution!!
I was finally able to get the installer build to work, even though it takes about ten minutes!! The network and CPU activity is minimal, so I don't know what LV is waiting on during all this time?
For this installation it appears to be related to the directory structure created by the Volume License Manager 2.1 software. There are two sets of users at my company, LabVIEW Professional and Developer Suite, which have different license numbers and installers. The errors were related to source files located in the Products folder of the network distribution. My installation expected the Products folder to be in a different location that it was actually placed by the VLM software. I copied the entire Products folder from _SourceFiles up to the LabVIEW 8.5.1 folder and now it works, although very slowly.
LabVIEW 8.5.1
-->_SourceFiles
    -->Bin
    -->Device Drivers
    -->Licenses
    -->Products   (original location)
    -->Signal Express
-->Dev Suite
-->LV Pro
-->Products    (manual copy)
I hope this information may be of use to NI or other users.
Message Edited by jrjones on 08-12-2008 03:21 PM
Message Edited by jrjones on 08-12-2008 03:23 PM

Process in restarting a FRP-run: how to prevent incorrect analytics data

Hi,
Today we encountered an issue where stock-data where not transfered to F&R. As a result OrderProposals generated during FRP-run were based on incorrect stock stock-values. As a result also the OrderProposals resulting from the FRP-run were considered incorrect and have been deleted by the business.
After stocks were processed correctly to F&R, a new FRP-run was done for the first 4 sequences in /FRE/FRP_MID_BASIC. (Note that we have these first 4 steps executed in the time critical window, and the Analytics step as a separate job directly afterwards).
Result is ofcourse new, correct, OrderPropsals but also a second run of the Analytics step on the same planning-day. As a result, in table /FRE/ANA_WEEKLY the STOCK_COUNTER is increased 2 times during one planning-day, which will cause incorrect data at the end of the week regarding average weekly-stock level.
It appears, every time the Analytics-step in /FRE/FRP_MID_BASIC is executed on a day, the STOCK_COUNTER field is updated. (this can be reproduced). The result will be incorrect Analytics data if that happens, but on the other hand: not executing the Analytics step a second time during the planning-day will also result in incorrect Analytics data as in that case it would in my situation have contained the stock-data from yesterday(as the initial issue was that current actual stock-data was not sent to F&R)
Is this a bug in F&R, or am I missing something? If there is a guide on what steps to execute under what conditions if FRP-run has to be executed again, or how to correct any (incorrect)Analytics data built up during previous runs?

a reply/answer would be appreciated....

How to delete incorrect entries Mavericks

DH accidentally typed an incorrect username on a webpage. Now everytime I start to type the correct username the incorrect one (with the same first two letters) pops up in a box underneath, along with the correct one.
How can I delete the incorrect entry? I have tried fn+shift+delete without success.

Thanks! I just figured it out right after I posted. This particular website was not under "usernames and passwords" where I thought it would be. Instead it was under "other forms".

Correct incorrect clip date

Is there a way to fix (inside FCP X) a video file that was imported into FCP X with the wrong creation date?

Hello Manoj,
I deleted the "accounted to" and deleted ERA as well.
But when i try to correct the action date, it doesn't allow me to change the date to 01.01.1998. Hope you'd have read my thread precisely!
When i try to correct actions, the action types "incorrect entry" and "correct entries" are missing. Unless, i delete the clusters, it doesn't allow me to change the entry date.
More inputs!
Regards
KK

How to Correct the Costing Data

Hi Gurus,
I have a situation where we enter the values for the element entry using Batch Element Entry. During this process for some of the assignments we have by mistake entered the wrong data for costing segments. and we have ran the payroll and all other post processes till costing. only thing is we have not ran Transfer to GL process.
Now we want to correct the data of costing for the assignments which have incorrect data.
Can anyone help me out with the best possible approach i can go, to achieve this task.
Thanks in advance.

Hi,
Small clarification,
i was thinking that i need to rollback all the process like Rollback Costing, Rollback prepayments,Rollback Payroll and correct the costing incorrect data.
and i was thinking to create a assignment set for whom the incorrect data is available and rollback processes for only those assignments.
Or
only rollback of costing will help me in correcting the data.
please advise.

How to correct a STRANGE date in "Search" Outlook for Mac 2011

When I search “All Items”, I get this:
When I search “Mail”, it correct:
Why does “All Items” show” Jan 1, 1904”!?
How do I make it show the correct date the mail was sent?

Since Outlook is not an Apple product and your question is not related to a compatibility issue between Mac OS and Windows...the topic of this forum, you'll probably want to post your question on Microsofts own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

How to correct incorrect iTunes store CD info

Can anyone tell me how to submit suggestions/corrections to Apple regarding errors and/or omissions in the displayed iTunes Store CD information (especially the artist category)? Thanks.
G5 Mac OS X (10.4.5) Proud Mac user since 1987

I used the Request Music page to report typo's.
2 weeks later they were fixed.
The iTMS does not reply, so I cannot tell if it was a coincidence or they fixed it after receiving my email.
Hope this helps.
M
17' iMac fp 800 MHz 768 MB RAM Mac OS X (10.3.9) Several ext. HD (backup and data)

How to correct the idoc data in XI and repost

Hi ,
I doing file to idoc scenario, In this scenario i am posting two target msg from one source msg , now the requirement is that second target msg is to validated against first target msg and if the condition is not met then stop the posting of second target msg and flag and error. after that target source msg needs to corrected and posted...
For eg one target msg is payment idoc and second is sales idoc, i need to validate the sales and payment amount and if it does reconcile then stop the sales idoc , correct the ampount and post it
Any ideas !!!!!!!!!!!!!
Regards
Swatantra

Hi Dirk
Thanks for the reply
This is a retail scenario
The source file contains the sales and payment against the artcile sold. sometimes the sales amount varies to payment made due to currency conversion or some other reason. There is tolerance limit for this variance , but if this differnce is above the threshold then sales idoc should not be processed and the data needs to check and corrected .....
BTW i am doing abap maaping for this scenario
Any clues
Regards
Swatantra

How to correct Inconsistent Cube Data

We have following unique condition of the info Cube data which is causing duplicate records in reporting.
The Fact table of the Cube has data for one dimension ID 8042 in the Data Packet dimension.
This dimension Id does not appear in the Data Packet Dimension Table. But still the data is available in the fact table which is supposed to be a deleted data.
How can we delete this wrong dimension ID data from the fact table without deleting the whole Cube contents? We can not use selective deletion because we can not select the DIM ID in it and the 0REQUID for that dimension does not exist.

Mangesh,
This could be caused due to "automatic request deletion" option in the InfoPackage while loading new data.
You can use a function module RSCDS_DEL_OLD_REQUESTS to delete such requests from specific InfoCube.
If you are using Oracle database, you can use program SAP_DROP_EMPTY_FPARTITIONS. It deletes partitions (requests) that are no longer referred to in P-dimension.
Hope it works...

How to correctly handle PCM data?

I want to annotate PCM data going through the codec chain, but when I insert a codec (copied mostly from the PcmPacketizer.java (from the code samples) and try to just pass it through, I somehow am adding TONS of static, even though I'm not modifying the data itself, just examining it.
I've trying to process chunks based on 20ms frames (sample rate * 0.02 * bitrate / 8), but notice that the incoming data size is NOT a multiple of that.
Anyone have an example of a PCM passthrough Codec? If fear it's something I don't understand about the data chunking, since nothing else is making sense...

Hi all,>
My model is represented by a JTree. Each piece is a
node. I supply the pieces for the user to build the
model. The user then picks the pieces he want to use
to build the model. Then, he hits the run button and
the simulation of the model starts.
This model is very complex. There can be 100 -1000
nodes in the model, and every node has lots of
parameters (mass, time, temperature, volume, zodiac
sign) and they change with time. I display the
parameters as nodes in the JTree, also.
When the user hits run, the simulation starts. The
program walks the model and changes all the values
with each time step. This means all the values will
be changing constantly.I hope in a diffrent thread.
What will be shown on the tree. Mass, temparature of all together
Finally, my question, how should I keep the JTree up
to date? If I use nodesChanged event, every node will
be calling nodesChanged, there will be a whole lot of
them. The time steps are very small, and I'm afraid
it might be too intensive to update this way. What
would be the best way to update the JTree?a) You must call nodesChanged so the tree paints correclty, if you do the update in a diffrent thread, lower the thread priority, so the event thread gets enough CPU to process updates.
b) JTree is failrly scalable
b) The updates for nodes that aren't expanded will be ignored.
c) Repaint events will probably be collapsed into one...
d) Setting the JTree.setLargeModel will call your models less frequently
e) I have a tree that's around 5k nodes which are frequently updated, but the JTree is not locking my app
There is no need to call nodesChanged for every node, eg you can pass an array a children which have been changed.
Sorry if this is confusing. If you have any
questions, I'll try to clarify it.
Any ideas?You could also freeze your model, do the update and than fire
structureChanged which will rebuild the Tree, but you will
loose the selection, expansion state, ...

How to correct the erroneous data in PSA

Hi Friends,
Currently we are using BI 7.0 and loading flat file. We have some invalid characteristics in the source file itself. We have created infopackage and executed also and came to know that file is having some invalid characteristics.
Now we want to edit this error records in PSA itself and from there we want to upload in to above data targets( DOS). To edit this PSA data we went to RSMO screen and PSA maintenace button but it was saying no "PSA could be found".
My doubts regarding this data flow are given here:
1. By default l PSA is included in Data flow ( when we are executing the infopackage )or not?
2. Without PSA where the data going to be reside. Do we need to maintain any settings at Infopackage screen to include PSA in the data flow?
3. If My data flow is like Datasource ---> DOS, then we have to create infopackage to push the data into PSA and there on we need to create DTP to push the data from PSA to DOS. So, PSA presence is mandetory in this data flow or without PSA also we can uplaod the data from Data source to DOS.
Please give your valuable answers for above questions.
Thanks in advance..

If there is any Error Records (i.e. Special Charecters)... Please load to ODS as well from PSA. You can change in Error Stack and Load using Error DTP.
1. Yes, PSA is part of Dataflow.
2. You can't load without PSA.
3. Not possible without PSA in BI 7.0
You can change from Datasource --> Manage --> You can PSA Push button on Application Tool Bar. Select your Request and Click on PSA Icon. You can change in that Screen.
In your case, based on the error. You don't have that request in PSA i guess.
Nagesh Ganisetti.
Assign points if it helps.

Entry date correction

i have to correct entry date .
Actual entry date lies after the incorrect entry date.
how can i access these two functions:-
Incorrect entry
Corrected entry
regards
niki

if u run the pay roll
than delete the data
and try to run again by giving correct date
https://forums.sdn.sap.com/click.jspa?searchID=12407083&messageID=5433063
check this thread
Edited by: Sikindar on Jun 2, 2008 2:02 PM

How to get the details of entry date in SQ00.

Hello,
Can anybody let me know the steps how to get the entry date in the report SQ00.Here when i am selecting entry date its coming as 00.00.00.(as zero).please let me know how to correct the steps with proper steps.

Hi
Apply the SAP NOTE 562031. This will rectify the error. I too faced similar problem which was then corrected when this Note was applied.
Test it first an then let me know

How to correct incorrect entry date?

Similar Messages

Maybe you are looking for