How to correct the time on a bunch of photos?

I have imported a bunch of photos, but the time of the camera was not correctly set.
Now I have to change the time of each photo by adding 4h 45'.
Is there an efficient way to do this?
(There is Photos → Batch Change... but this offers to add x minutes between photos. I have no idea what this means).

Photos -> Adjust Date and Time does the job.
Regards
TD

Similar Messages

I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?

I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?

Disable your antivirus and firewall, and try again.

Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign. Please advise how to correct the name that it is saved under.

Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign. Please advise how to correct the name that it is saved under.

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

How to correct system time

Hi
Can any one help me how to correct JVM time.. when we run interface at 14.00 hrs, file has been created with date and time stamp like 20090112-020012 this way.. however i would be expecting 20090112-140012 . here if you see the difference, 12 hrs time format has been set.. that's why system never shows more than 12 hours. Although it's a silly issue, but want to understand where we are missing.
Thanks

Hi Chinna,
Check this links for changing the date in the UNIX OS
http://www.ddms.com/Resources/Support/faq/unix/unixtime.pdf
http://www.ehow.com/how_2029191_set-time-unix.html
Regards
Ramesh

How to correct the birth date in Apple account? How to change the numerals to English for UAE location?

I purchased iPhone 5S and opened new Apple account with preffered language English and location UAE. I was directed to enter my birth date with only Arabic language option. There was no way to change the language or skip the step. I had to enter an arbitrary birth date to go to the next step. How to correct the birth date now and change the numerals to English?

Solution!!
I was finally able to get the installer build to work, even though it takes about ten minutes!! The network and CPU activity is minimal, so I don't know what LV is waiting on during all this time?
For this installation it appears to be related to the directory structure created by the Volume License Manager 2.1 software. There are two sets of users at my company, LabVIEW Professional and Developer Suite, which have different license numbers and installers. The errors were related to source files located in the Products folder of the network distribution. My installation expected the Products folder to be in a different location that it was actually placed by the VLM software. I copied the entire Products folder from _SourceFiles up to the LabVIEW 8.5.1 folder and now it works, although very slowly.
LabVIEW 8.5.1
-->_SourceFiles
    -->Bin
    -->Device Drivers
    -->Licenses
    -->Products   (original location)
    -->Signal Express
-->Dev Suite
-->LV Pro
-->Products    (manual copy)
I hope this information may be of use to NI or other users.
Message Edited by jrjones on 08-12-2008 03:21 PM
Message Edited by jrjones on 08-12-2008 03:23 PM

How to calculate the time between start trigger,first scan and first A/D in DAQ

Environment: Labview 6.1, N6052E DAQ board(max scan rate=333KHz, max channel rate=333KHz, settling time=3.5usec+1LSB)
I am using external scan clock 10K scan/s collecting data on 16 AI channels, and external channel clock 200KHz.
Could show me how to calculate the time betweent he start trigger, the first scan and the first A/D conversion?
Thanks

I read the one you give to me. still cannot work out. I am using Labview 6.1 DAQ vi, including AI config.vi. clock config.vi, AI control.vi, AI read.vi, working on colect data on 16 AI channels. So I belong to SCAN function and external scan and sampling timing, right?
But it says the T1 and T2 are determined by external signals. How can I calculate that?
T1=1/10KHz or T1=1/160Khz?
T2=1/200KHz?
Is the above correct?

How to change the time ??

Hello guys,
I would like to know how to change the time in a 7970G cisco phone, I dont know if the phone gets the date from a server, but checking typing this command: show clock in the CME UC520, date and time shows correct , I powered off / powered on the phone and it remains with the same Wrong time (just time no date), any adivce would be very well received. Thanks!

Hi Gerardo,
Complete these steps on the Cisco CallManager Express in order to display the correct time:
Configure the type 7970 command under the ephone.
ephone 1
device-security-mode none
mac-address 0017.59E7.492C
type 7970
button 1:1
Configure the time-zone command under the Telephony service.
telephony-service
max-ephones 5
max-dn 5
ip source-address 10.1.0.1 port 2000
auto assign 1 to 5
time-zone 8
dialplan-pattern 1 ... extension-length 4 extension-pattern 9000
voicemail 6000
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 05 2009 12:44:03
Configure the create cnf-files command under the Telephony service in order to implement the change in step 1 and 2.
CME-CUE(config-telephony)#create cnf-files
CNF file creation is already On
Updating CNF files
CNF files update complete
Verify
Comlete these steps in order to reset the Cisco 7970 IP Phone:
Press the Settings button on the Cisco 7970 IP Phone.
Enter the **#** key sequence on the phone keypad in order to reset the phone.
The correct time displays on the Cisco 7970 IP Phone after the reset.
Troubleshoot
Complete these steps if the time displayed on the Cisco 7970 IP Phone is incorrect:
Verify the phone configuration on Cisco CallManager Express.
Display the 7970 configuration file on Cisco CallManager Express. The name of the file is xmldefault7970.cnf.xml, which is located in the system:/its/ directory. Complete these steps in order to display the configuration file:
Log in to Cisco CallManager Express.
Complete these steps in order to display the 7970 configuration file:
Issue the cd system: command.
Issue the cd its command.
Issue the more xmldefault7970.cnf.xml command in order to dump the configuration.
Verify that the time zone parameter is correctly configured . The output of the command is shown here:
CME-CUE#more xmldefault7970.cnf.xml
M/D/YA
Greenwich Standard Time
2000
10.1.0.1
{7970 Feb 05 2009 12:31:07}
2
English_United_States
en
United_States
United_States
0
http://10.1.0.1:80/localdirectory
Complete these steps in order to verify that Cisco CallManager Express successfully sends the 7970 configuration file to the Cisco 7970 IP Phone:
Log in to Cisco CallManager Express.
Issue the debug tftp events command.
Issue the terminal monitor command.
Reset the Cisco 7970 IP Phone.
This output shows the results of the debug tftp events command. The bold text indicates the phone has successfully received its configuration file.
Feb 5 12:38:21.539: TFTP: Opened system:/its/XMLDefault7970.cnf.xml, fd 0, size
1033 for process 287
Feb 5 12:38:21.543: TFTP: Finished system:/its/XMLDefault7970.cnf.xml, time 00:
00:00 for process 287
Feb 5 12:38:24.383: %IPPHONE-6-REG_ALARM: 20: Name=SEP001759E7492C Load= SCCP70
.8-3-2S Last=Phone-Keypad
Feb 5 12:38:24.427: %IPPHONE-6-REGISTER: ephone-1:SEP001759E7492C IP:10.1.0.4 S
ocket:1 DeviceType:Phone has
registered.
Regards,
Justin

How to remove the time slider from my project and keep only buttons

How to remove the time slider from my project and keep only buttons to interact with my project .

If I understand you correctly, go to the skin editor (Project, Skin Editor in Captivate 4), select the Playback Control tab, uncheck the Progressbar check box. Leave checked the buttons for play/pause, rewind, forward, back, etc.
I hope this helps.
Mister C.

I can't sign into Mozilla Foxfire the messages say crash I send the Crash Report, and look a detail, but not should were the crash started and how to correct the problem.

I can't upload Mozilla Foxfire internet, an error message shown Crash, I sent the crash report but not happen. Also look at the crash report detail, I'm should were the crash started and don't no how to correct the problem
== This happened ==
Every time Firefox opened
== may 18 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; (R1 1.6); InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Firefox will not open. I have the message "Firefox crashed" and a statement that Firefox will restore my tabs and send me a message, neither of which has happened.

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet? What could be the problem? How long do the Time Capsules usually last?

That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
See deadtimecapsule.org
The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
But it is well and truly time to replace.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

How to display the time 00:00:00 as blank?

Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!

In screen PBO module:
        LOOP AT SCREEN.
          if screen-name EQ 'my_time' AND my_time EQ time_zero.
            screen-invisible = 'X'.
            screen-active = 0.
            MODIFY SCREEN.
          endif.
        ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM

How to display the time length of video (current time/ total time) ?

Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.

Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
     at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
     at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
          AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                        // technique
          48000.0F,// sampleRate the number of samples per second
          16, // sampleSizeInBits the number of bits in each sample
          2, // channels the number of channels (1 for mono, 2 for
                        // stereo, and so on)
          4, // frameSize the number of bytes in each frame
          48000.0F,// frameRate the number of frames per second
          false); // bigEndian indicates whether the data for a single
                        // sample is stored in big-endian byte order
                        // (false means little-endian)Can you please suggest where I am going wrong ?

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Why doesn't siri know how to change the time of a reminder? When asked, "Do you want to confirm or cancel your reminder?" Reply, "Can I change the time to a half hour later?" Siri doesn't know how to respond.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

I am using I Photo 9.2.3 with OS 10.6.8 When I upgraded to current I photo some of my Iphoto books i put together disappeared. Cant find them anywhere, including in the time machine...I photo cant open older files...How can a find th book entitled "Mom"

I am using I Photo 9.2.3 with OS 10.6.8 When I upgraded to current I photo some of my Iphoto books i put together disappeared. Cant find them anywhere, including in the time machine...I photo cant open older files...How can a find the book entitled "Mom" ? Does Apple keep ordered books on file?

Apple keeps books for a short time (used to be 40 days. I've not seen a recent time frame)
What version did you have?
Books do nor exist except in the iPhoto database so you can not "find" a book vista TM. You restore a previous library (be sure NOT to overwrite your current library) and switch to it
LN

How to correct the time on a bunch of photos?

Similar Messages

Maybe you are looking for