How to correct this goods movement?
user wrongly put our own stock back to consignment stock, and the IOs are closed which means we can't use MBST to cancel the material. what can we make the adjustment? please kindly reply if you know.
Hi Nancy,
Try this option.
Do the transfer post ( MB1B)
Move ment type 411,special stock K.
Move the stock consignment to U.R
Cheers
Similar Messages
-
I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
How to block all goods movements incurs to a warehouse?
Hi all,
I am wondering if you can provide me a way, a transaction code on how to perform the following?
How to block all goods movements incurs to a warehouse.
I am trying to execute LX23 (Stock comparison IM/WM) and try to remove the differences using batch input file.
SAP document indicates the prerequisite to use this feature is that all inventory movements to the warehouse be blocked before clearing the differences (i.e. adapt the IM figure to that of WM figure).
Appreciates.
DanielI think the requirement here is to block inventory movement (GR, GI, PCN etc.) to storage locations which are connected to your warehouse. Blocking movement on storage types in your warehouse does not serve this purpose.
Is it really necessary to block inventory movement when running LX2? LX23 eventually will need to correct the stock via IM posting at the end.
Anyway, if storage location level authorisation check is not currently in use in your system (OLMB -> Authorisation Management -> Authorisation check on storage location), you may try to activate authorisation check on storage locations connected to your warehouse so that those who has no M_MSEG_LGO assigned won't be able to post inventory movement to the warehouse. -
I unstalled Photoshop Elements 12 from my computer andnow when I'm trying to re-install I'm getting an error message "objext already exist". Any suggestions on how to correct this?
jgbrph
If your program is Photoshop Elements 12, then you have posted in the wrong forum. Your thread is now in the Adobe Premiere Elements Forum (video editing).
Please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
While you are making your move, consider
a. what computer operating system is involved...if we assume Windows
b. have you checked Control Panel/Programs to assure that the program is no longer listed as an installed program?
If it is no longer installed, you might want to consider a free ccleaner run through (regular cleaner and registry cleaner parts) to get
rid of any leftovers from incomplete installs and uninstalls. Then reinstall with antivirus and firewall(s) disabled.
ATR -
When trying to share to idvd it shows 'project could not be prepared for publishing due to error (-34)' - anyone know how to correct this?
Hi
Error -34 disk full
• Free space on Your Start-Up (Mac OS) hard disk. How much ?
• Any other hard disk as target for movie project ? Free space on this/them ?
Yours Bengt W -
Sales order (SOBKZ = &1) is not provided for this goods movement the messag
Dear Friends,
I have created one subcontracting PO based on a sales order, so the order is belonging to special stock...
Now i got a below error when i transfer the stock to subcontractor against this PO through MB1B but it likes as warning msg(in Yellow) but i can't post this transaction.
Sales order (SOBKZ = &1) is not provided for this goods movement the message no is M7374
Kindly help me how to over come from this?
please note that as per the system suggesion i go to Define Attributes of System Messages for changing the message type from E to W. But i can't find this kind of message type in that list.
regards,
sathesHi,
Subcontracting for Sales Order Stock: -
Purpose: - Subcontracting is also possible in conjunction with sales order stocks. The subcontracting orders are account-assigned to a sales order. Thus, the components are not transferred (using a transfer posting) to the "stock of material provided to vendor" but are directly withdrawn from the sales order stock the time of the goods receipt. The material manufactured is also posted to the sales order stock.
The cost of subcontracting is then debited to the sales order.
Since the components are not transferred to the "stock of material provided to vendor", it is recommend that you use a transfer posting to transfer the provided components to a new storage location (for example, 9999). This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
Features: -
Withdrawal from Stock of Mat. Provided or Sales Order: -
For components that are managed in sales order stock, you can define whether the components are to be withdrawn directly from each sales order or from the stock of material provided to vendor. You manage this via the dependent requirements indicator for individual customer requirements and collective requirements (MARC-SBDKZ).
You can maintain this indicator in the following places:
In the MRP view of the material master record (MRP 4)
In the explosion types for the BOM item (in Customizing for Production in the step Basic Data -> Bill of Material -> Item Data -> Define explosion types )
Configuring the explosion types has priority over the configuration in Inventory Management.
If the indicator is set at Collective requirements only (2), the materials are withdrawn from the stock of material provided to vendor. If this indicator is set any other way, the system withdraws materials from sales order stock.
Refer following link;
[Subcontracting for Sales Order Stock and Project Stock|http://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm] -
My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?
If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash. -
When I enable WI-FI on my iphone4 and connect to my network I do not receive emails from my AOL account, however, I receive emails from my corporate outlook exchange account. When WI-FI is disabled I receive emails from each account. Any ideas how to correct this? Thanks in advance.
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back soon. -
Hello,
When I click on "Artists," a number of "Album Artists" are showing up in the list. How to correct this? Thank you!Is that the Bookmarks Menu button ?
*https://support.mozilla.org/kb/how-do-i-use-bookmarks
*https://support.mozilla.org/kb/common-questions-after-updating-firefox
*http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
*https://support.mozilla.org/kb/Sorting+bookmarks -
My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss? -
I have an Iphone 3gs and cannot send text messages to my wife. She is the only person that I cannot send or receive text messages from. Does anyone know how to correct this?
We both have AT&T service. She has an Iphone 4s, I have the 3gs.
-
Hi, my facebook app on my Ipad3 has stopped allowing me to put comments on. Does anyone have any ideas how to correct this? Don't know if it is a problem with the Ipad or just the facebook app. Thanks.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
Cheers, Tom -
Primary (internal battery) 601 very low how to correct this
Primary (internal battery) 601 very low how to correct this my model no is HP pavilion g4 its g series
Hi,
Pleae try the following test. If failed you have to replace the battery (the main, big battery which powers the laptop):
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00821536
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I am a landlord and I organazied my contacts by the address of my tenants. I just joined to Icloud and I am not able to find my tenants in the directory in the computer at all. I could search when I am using my phone but they do not show at first.how can correct this? as an example 37 31 1 and when i type this nothing is showing.
I am a landlord and I organazied my contacts by the address of my tenants. I just joined to Icloud and I am not able to find my tenants in the directory in the computer at all. I could search when I am using my phone but they do not show at first.how can correct this? as an example 37 31 1 and when i type this nothing is showing.
-
M7301 VALUE OF THIS GOOD MOVEMENT IS NEGATIVE
Hi Gurus,
While doing the GR ( via IDOC ) against the PO getting an error VALUE OF THIS GOOD MOVEMENT IS NEGATIVE. The process is below
PO Created with more than 300 Items and 12 items was deleted. The PO is not GR based invoice veritifcation,
IR has been done for the items.
We are using inbound delivery to update the Purchase order. Later based on the Inbound delivery GR need to done.
Not manual GR, 3 PL sends the file and in SAP it updates the GR against the inbound delivery.
While doing GR we are facing the Error M701 VALUE OF THIS GOOD MOVEMENT IS NEGATIVE
I checked all of the aspects likeOSS note 773515 we are using 4.7 version.
Regards,
YuvaWhat is the Movement type you are using?
Maybe you are looking for
-
Port forwarding for Warcraft 3 - no other posts have helped me solve this :
Hi everyone, At risk of flogging a dead horse, I am having trouble with port forwarding/port mapping on my new AEBS and need help. Warcraft 3 requires ports 6112-6119 open, which I had successfully set up through the Router Management Interface of my
-
Blank thumbnails in Iphoto mobileme gallery after snow leopard upgrade
After upgrading to snow leopard, all the thumbnails for my different mobileme galleries are blank. iphoto 08. If I click on a blank thumbnail, I get a big ? I tried logging out and back in mobileme a few times, and also tried all the "rebuild" option
-
I'm trying to use the quick selection tool in Photoshop Elements 12 but it keeps getting stuck on minus. I've reinstalled twice and it will work for a little while and then get stuck again. When I select something, I have one shot at it and as soon
-
Will older macs ever work with 802.11n
Just wondering if the requirements for 11n is just a matter of buying a new network card or does the hardware also have to support it as well. I ask only because I have a G4 & G5 on my existing airport network. Have a MacBook Pro also on network. I w
-
Invenotry Valuation for BOM or regular items in standard cost
How SAP defines Inventory Valuation for BOM (Parent, Child) with different Inventory types? If Parent Items is Inventory and Sales only but Child Items are Inventory and Purchase Items then the inventory value will base on each Item Cost or.... When