How to correctly allocate size while creating FileSystem

I am finding difficulty in creating and allocating correct size to File Systems on solarix x86 box. Please see below contents I followed on screen and in the end It shows that /app file system is created of size 135GB , I wanted it to be 30gb as mentioned during 'format' command in 'Enter Partitiion size' :
root@unknown # df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 15496821 7472292 7869561 49% /
/devices 0 0 0 0% /devices
ctfs 0 0 0 0% /system/contract
proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
swap 17574616 808 17573808 1% /etc/svc/volatile
objfs 0 0 0 0% /system/object
/usr/lib/libc/libc_hwcap2.so.1
15496821 7472292 7869561 49% /lib/libc.so.1
fd 0 0 0 0% /dev/fd
swap 17573844 36 17573808 1% /tmp
swap 17573840 32 17573808 1% /var/run
root@unknown # format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <DEFAULT cyl 17832 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7450@2/pci1000,3060@3/sd@0,0
1. c0t2d0 <DEFAULT cyl 17846 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7450@2/pci1000,3060@3/sd@2,0
2. c0t3d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7450@2/pci1000,3060@3/sd@3,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c0t0d0s1 is currently used by swap. Please see swap(1M).
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
fdisk - run the fdisk program
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit
format> p
PARTITION MENU:
0 - change `0' partition
1 - change `1' partition
2 - change `2' partition
3 - change `3' partition
4 - change `4' partition
5 - change `5' partition
6 - change `6' partition
7 - change `7' partition
select - select a predefined table
modify - modify a predefined partition table
name - name the current table
print - display the current table
label - write partition map and label to the disk
!<cmd> - execute <cmd>, then return
quit
partition> p
Current partition table (original):
Total disk cylinders available: 17832 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 524 - 2482 15.01GB (1959/0/0) 31471335
1 swap wu 1 - 523 4.01GB (523/0/0) 8401995
2 backup wm 0 - 17831 136.60GB (17832/0/0) 286471080
3 unassigned wm 2483 - 4441 15.01GB (1959/0/0) 31471335
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> 3
Part Tag Flag Cylinders Size Blocks
3 unassigned wm 2483 - 4441 15.01GB (1959/0/0) 31471335
Enter partition id tag[unassigned]: usr
Enter partition permission flags[wm]:
Enter new starting cyl[2483]: 2483
Enter partition size[31471335b, 1959c, 4441e, 15366.86mb, 15.01gb]: 30gb
partition> p
Current partition table (unnamed):
Total disk cylinders available: 17832 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 524 - 2482 15.01GB (1959/0/0) 31471335
1 swap wu 1 - 523 4.01GB (523/0/0) 8401995
2 backup wm 0 - 17831 136.60GB (17832/0/0) 286471080
3 usr wm 2483 - 6399 30.01GB (3917/0/0) 62926605
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> label
Ready to label disk, continue? y
partition>q
root@unknown # newfs /dev/rdsk/c0t0d0s2
newfs: construct a new file system /dev/rdsk/c0t0d0s2: (y/n)? y
Warning: 5208 sector(s) in last cylinder unallocated
/dev/rdsk/c0t0d0s2: 286471080 sectors in 46627 cylinders of 48 tracks, 128 sectors
139878.5MB in 2915 cyl groups (16 c/g, 48.00MB/g, 5824 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 98464, 196896, 295328, 393760, 492192, 590624, 689056, 787488, 885920,
Initializing cylinder groups:
super-block backups for last 10 cylinder groups at:
285576352, 285674784, 285773216, 285871648, 285970080, 286068512, 286166944,
286265376, 286363808, 286462240
root@unknown # mount /dev/dsk/c0t0d0s2 /app
root@unknown # df -k /app
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s2 141066718 65553 139590498 1% /app
root@unknown #
Please advice, what is wrong I am doing above?

panchpan wrote:
THANKS a lot - The size allocation is resolved now :-) Please see few questions, perhaps I missed to have this basic knowledege
1) How to create more than 7 partitions?
2) Slice 9 seems to be unassigned. But I am not able to allocate 9 - It says '9' is not expected as shown below:
Part Tag Flag Cylinders Size Blocks
0 root wm 524 - 2482 15.01GB (1959/0/0) 31471335
1 swap wu 1 - 523 4.01GB (523/0/0) 8401995
2 backup wm 0 - 17831 136.60GB (17832/0/0) 286471080
3 usr wm 2484 - 6400 30.01GB (3917/0/0) 62926605
4 usr wm 2485 - 3790 10.00GB (1306/0/0) 20980890
5 usr wm 2486 - 5096 20.00GB (2611/0/0) 41945715
6 usr wm 2487 - 5097 20.00GB (2611/0/0) 41945715
7 usr wm 2488 - 5098 20.00GB (2611/0/0) 41945715
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 unassigned wm 0 0 (0/0/0) 0
partition> 9
`9' is not expected.
3) How to give different names in 'Tag'?
4) How to know actually, How much size can be distributed among user defined partitions?
5) On solaris, How do we actually verify IF mirroring is in place?1) You create a really big slice and use soft partitioning. Otherwise 7 hard partitions are all you can assign.
2) That's an alternate system partition. You can't touch it and there's only 2 cylinders in it anyway.
3) There are only certain values that are legal. You generally don't adjust them.
4) Slice 2 is the entire usable space. That tells you how much you can distribute among the 7 (0,1,3,4,5,6,7) partitions/slices available to you. In your case; that's about 137 GB.
5) It isn't by default. You have to take positive actions with either Logical Volume Manager (aka Solstice Disk Suite for us old school guys) or some other form of volume manager. LVM is free with the OS and does a great job of mirroring the OS. I personally wouldn't use it for managing a form of disks; but it's perfect for the OS mirroring.
Edited by: John.Kotches on Nov 12, 2007 12:46 PM

Similar Messages

How to give network path while creating oracle directory.

I have created
CREATE OR REPLACE DIRECTORY TESTDIR AS '\\168.176.33.117\TESTDIR';
but through this path i m not able to create text file.
create or replace procedure WriteTest is
f utl_file.file_type;
s varchar2(200) := 'this is some info';
begin
f := utl_file.fopen('TEST2DIR','sample2.txt','W');
utl_file.put_line(f,s);
utl_file.fclose(f);
end WriteTest;
Help how to give network path while creating oracle directory.
--when i give local machine path then it will create at local machine where oracle is installed. but not able to create at other machine.
Zakir

Well for starters your directory object is called TESTDIR and in your fopen statement you are referring to TEST2DIR.
On top of that I'm not sure oracle is happy to refer to network locations. I think you have to map it to a regular drive mapping (shared directory) type path. Can't say I've every tried to do it though.

How to add image file while creating addon...pathsetup?

Hi friends,
i have a problem while creating addon.
while creating addon we can add all the files(.vb,xml).but if i add image files(.bmp,.jpg)they are not displayed in runtime.
--how to add image file while creating addon..?
we are useing SAP Business One 2005A(6.80.317)SP:01 PL:04

Somebody knows like I can indicate to him to a button that I have in a form, that accedes to the image in the route where will settle addon? I have this, but it does not work to me
oButton.Image = IO.Directory.GetParent(Application.StartupPath).ToString & "\CFL.BMP"

"How to pass classification characteristics while creating batch" ?

Hi,
    I am using FM's BAPI_BATCH_CREATE/CHANGE while creating/changing batch I have to maintain classification data aswell.But in FM docu i saw as shown below
1.Create the classification of a batch in the background (object characteristics only)
2. If the batch is to be classified, you must specify a class in the BatchControlFields parameter. Only single classification is possible.
According to above statments I have passed class name in Batch Control Fields but I am unable to find " How to pass classification characteristics while creating batch". Please tell me how to pass classification characteristics in background?
Edited by: Vijay Babu Dudla on Dec 16, 2008 3:24 AM

Hi, You can update classification for a batch using the following code.
But first, you'll need to find out that the batch management is cross-plant or plant dependant.
If it is cross plant then plant(WERKS) is not part of the key to BAPI_OBJCL_CONCATENATEKEY.
CLEAR: objectkey, objectkeytable, objectkeytable[],
           allocvaluesnumnew, allocvaluesnumnew[],
           return.
    objectkeytable-key_field = 'MATNR'.
    objectkeytable-value_int = matnr.
    APPEND objectkeytable.
    objectkeytable-key_field = 'CHARG'.
    objectkeytable-value_int = charg.
    APPEND objectkeytable.
* Only if Batch management is Plant dependant
    objectkeytable-key_field = 'WERKS'.
    objectkeytable-value_int = werks.
    APPEND objectkeytable.
    CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
      EXPORTING
        objecttable    = objecttable
      IMPORTING
        objectkey_conc = objectkey
      TABLES
        objectkeytable = objectkeytable
        return         = return.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from ="characteristic value goes here".
    APPEND allocvaluesnumnew.
    allocvaluesnumnew-charact = "characteristic name goes here".
    allocvaluesnumnew-value_from = "characteristic value goes here".
    APPEND allocvaluesnumnew.
    CALL FUNCTION 'BAPI_OBJCL_CHANGE'
      EXPORTING
        objectkey                = objectkey
        objecttable              = 'MCHA' " MCH1 in case of cross-plant batch management
        classnum                 = classnum " Classification class number, as used in MSC2N
        classtype                = classtype " Classification class type, as used in MSC2N
*   STATUS                   = '1'
*   STANDARDCLASS            = STANDARDCLASS
*   CHANGENUMBER             = CHANGENUMBER
*   KEYDATE                  = SY-DATUM
*   NO_DEFAULT_VALUES        = ' '
* IMPORTING
*   CLASSIF_STATUS           = CLASSIF_STATUS
      TABLES
        allocvaluesnumnew        = allocvaluesnumnew
        allocvaluescharnew       = allocvaluescharnew
        allocvaluescurrnew       = allocvaluescurrnew
        return                   = return
* Do not forget to commit, otherwise changes would not take effect.
commit work.
Regards,
Hashir Ahmed

How to control Doublicate Entry while creating GL Master

HI every one,
Can any one let me know, how to control Doublicate check while creating GL Master. And also for AR and AP if possible.
Thank you
Satish

Hello Satish,
You can implement the logic to control duplication of G/L Master records either in
a) Function Exit EXIT_SAPMF02H_001 available within the SMOD enhancement SAPMF02H
b) P/S BTE 00002310 (Master Record G/L Account: Save)
The logic would be to identify if G/L Accounts with same Short/Long Texts already exist in the Company Code.
Hope this resolves your problem. Please reward points.
With Regards
Vijay Gajavalli

How to capture an error while creating a purchase requisition

Hello All,
I append 50 line items while creating a PR using BAPI_REQUISITION_CREATE and I get an error in RETURN.
So can I capture the line item which exactly has that error.
I mean to say how to figure out the line item with error, if the BAPI gives an error.
Please suggest.
Thanks & Regards,
Tarun Gambhir

I could not find TEST_RUN option in these bapis
Roundway will be
1. Use BAPI_REQUISTION_CREATE with single line item and create PR then take the requisiton number
2. Use ME_UPDATE_REQUISITION. and add line by line into same PR (Within loop)
BAPI_REQUISITION_CHANGE can only be possible to edit existing line and you cannot able to add new lines,
a®s
Edited by: a®s on Jul 29, 2009 11:13 AM

AIX 5.2 : how to pass password value while creating a user on AIX server

Hi ,
Test connection is successful with AIX server , I can successfully create a user on AIX server, with defualt password.
I am not passing the any password value still some default value is being populated for the user...
In AIX while creating the user , use get force to set the password...
But while configuring the schema for AIX adapter ...if password attribute is given then it will give the error
as invalid attribute...while creating a user if password value pass...
how to set the password for the user..what attribute need to set for the password .
thanks ..

The default password might be the IdM account password of the user you are trying to provision. You don;t need to keep password in the resource schema. Just set password.password and password.confirmPassword and select AIX resource for password reset. Check the workflow-form-views document for more information on password view.

How to add shipping instructions while creating SO

Hi All,
I'm using the BAPI_SALESORDER_CREATEFROMDAT1 to create Sales Order.
I want to add shipping instructions while creating each orders.
How do I pass this information to the backend with this BAPI?
Thanks
Thruna

Somebody knows like I can indicate to him to a button that I have in a form, that accedes to the image in the route where will settle addon? I have this, but it does not work to me
oButton.Image = IO.Directory.GetParent(Application.StartupPath).ToString & "\CFL.BMP"

How to assign a seq while creating a table

Hi,
How to assign a sequence such that i dont want to give the sequence while creation. i mean
if employee table is there
sl_no empname salary .....
i dont want to give sequence while inserting the data, i want to give the sequence at creation of table level for sl_no
i tried this
create table seqtest1 (id number primary key default rajseq.nextval);
but it is showing me the error
ERROR at line 1:
ORA-00907: missing right parenthesis
whats the solution
please help me
Thank you
Raj deep.A

Hi Raj,
You can not assign a sequence to a column while creating a table. you have two options for this. (So you can also use one sequence for multiple tables)
1. As Gasparotto said, you can create a before insert statement. OR
2. you can assign new sequence number in the program code. for example.
insert into xxx (user_id,name,surname) values (seq_userid.nextval,'Raj','Deep');
Good Luck.
Onur

How to add Trip reason while creating a Travel request

Hi,
I want to add Trip reason while creating a Travel request . I have not been able to maintain FTPT_REQ_HEAD through sm30. Urgent help required

Hi,
There is no customizable table for travel reason
FTPT_REQ_HEAD is not maintanable
This is standard SAP, and in field REQUEST_REASON you can enter the description that you want and system will allow you do that. The same thing with field " 1st destination"
You add any description and it will be recorded and available for next entries in TP04
Hope this answer to your question
Best regards
Tarek

How to confirm a TO while creating in Backgrd mode

Experts -
I'm creating a Transfer Order in a Background mode on LT01, I want the TO should be auto confirm. So that when I display the created TO again it should look like TO-Confirmed....
Do I need to do any coding in the User-Exist?
Thanks for ur advise.
James....

Thanks John for your quick reply.
My problem is the Movement type for the TO is not configured for auto confirmation and TO needs to be created under background mode.
So I need to confirm the TO while creating it in the background mode without customizing in SPRO for the movement type.
Thanks for ur advise....
Thanks
James....

How To Hide A Field While Creating PO.

Hi,
Please Give me the solution of my problem. As I want that NoBody Could Change The Description of the related Material code which comes under Text Field Both while creating/changing PO.

Hi,
Try to maintain PO master data.
1. Go to tcode SM31, table view V_162, choose Maintain.
2. Select ME21N --> Detail.
3. In the field selection group --> choose Basic data, item
4. Line item Material Description --> tick Display instead of Opt entry
5. Choose Back button, again, then Save
You should have your Short text field in ME21N as display only, once you have enter the Material.
Hope this help.
regards,
rob

How to remove build errors while creating an Order App. for Handhelds

Hi Friends,
As per the Tutorial: Developing an Order Application for Handhelds provided at the given link http://help.sap.com/saphelp_nwmobile71/helpdata/en/8F/0B674240449C60E10000000A1550B0/frameset.htm
I am creating mobile application for PDA . I have finished many steps but at one step I am getting build errors.
The step is when we create service and paste the code provided in the document.
public void generateTestData() {
//@@begin implementation
      if( !(((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).getOrderOrderheaders().size() > 0))
         OrderOrderheader order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0023378");
         order.setLongtext("Repair front door");
         order.setServiceunit("SU01");
         order.setCreatedOn(Date.valueOf("2007-06-30"));
         order.setCreatedAt(Time.valueOf("08:45:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0024897");
         order.setLongtext("Analyse malfunction");
         order.setServiceunit("SU01");
         order.setCreatedOn(Date.valueOf("2007-07-01"));
         order.setCreatedAt(Time.valueOf("09:00:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0034534");
         order.setLongtext("Repair escalator");
         order.setServiceunit("SU03");
         order.setCreatedOn(Date.valueOf("2007-07-03"));
         order.setCreatedAt(Time.valueOf("19:45:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0024589");
         order.setLongtext("Analyse computer problem");
         order.setServiceunit("SU04");
         order.setCreatedOn(Date.valueOf("2007-07-01"));
         order.setCreatedAt(Time.valueOf("15:45:00"));
         order = ((Order_srvModel)OcaRoot.getInstance().getModel(Order_srvModel.class)).createOrderOrderheader();
         order.setOrderid("0027890");
         order.setLongtext("Repair door lock");
         order.setServiceunit("SU03");
         order.setCreatedOn(Date.valueOf("2007-07-05"));
         order.setCreatedAt(Time.valueOf("10:00:00"));
         OcaRoot.getInstance().commit();
//@@end
The issue is I am getting a red line below each set methods as I have shown by underlining. I am struggling with how to rectify the error.When I write ORDER and write . after it , it shows only get methods in the popup not the set methods.
Please suggest .
It will be a great help.
Regards,
Nitesh

Hi Nitesh
Check if the data object you created is bi directional in DOE?
Regards
Vidyadhar

How to write error log while creating invoice and avoid implicite commit

Hi,
I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
Thanks

@ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work. Also SAP support would not answer to the question in my OSS.
In VOFM, SAP is using routine VBFS_HINZUFUEGEN_ALLG to write to error log.
Mine is something like this in ue:
      PERFORM ZVBFS_HINZUFUEGEN_ALLG
                 USING VBAP-VBELN VBAP-POSNR 'ZSD' 'E '600'
                       SPACE SPACE SPACE SPACE.
(we have custom message class)
As result XVBFS and VBSK are filled with error, but posting is also done. Error log is filled but invoice is created and posted in FI.
That is not OK.
thanks

How to set SGA Parameter while creating DB...

Dear All
I am creating a new production database and I am new TO Database, I have 500 users.
How should i set SGA size , is there any metalink ID or any clues.
Thanks.

911299 wrote:
Dear All
I am creating a new production database and I am new TO Database, I have 500 users.
How should i set SGA size , is there any metalink ID or any clues.
Thanks.Post DB version ( 4 digit )
Take a 10Mb per user to start with ( some kind of rule I use to use )
You can only start tuning the memory later on, when the database is under load.
Cheers
FJFranken

How to correctly allocate size while creating FileSystem

Similar Messages

Maybe you are looking for