How to correctly identify and measure menu sizes

I've got a project that upon build says it's utilizing less than 4.7G. For that reason I began a build and after hours of processing it said there wasn't enough space even though Encore showed only 4.011G was used and over 600M was still available before the build. Seems like it shouldn't build if it's not going to work out.
Everything has been transcoded or is already converted to MPEG-2. However I've read just about every thread I can find on the subject of dealing with the 1G menu size limit and now a new anomaly, the Times and/or chapters adjusted warning, has appeared. I'm trying to understand how anyone can logically tie these back to something specific to troubleshoot and correct them. Just about every other error links back to the problem so you can adjust it, but these are vacuous.
My first question then is about menus and how a menu actually measured. What determines total file size, the menu itself or the content that is linked from the menu? Why not have a list of total menu sizes so you can see not only the individual file sizes, but the aggregates that impact the menu size limitation?
All my menus are static and link to video clips. My largest clip is about 511M of video and 265M of audio. That one is already converted to MPEG-2. I have less than 4.7G of content to burn to the DVD and appear to have plenty of headroom according to the build menu disk info.
My next question is about a file that Encore says is in use, but it isn't. It could be adding to my overall menu size, yet nothing is linked to it and no chapters appear to be in use with it. It should be an orphan, but not according to Encore. Again, shouldn't there be a logical way to identify that link? Managing a dependency that can't be found is a nightmare. None of the menus or timelines offer any insight about the mystery clip that can't be deleted. I read a thread that said they had a similar problem, but building forced the anomaly out. Didn't work for me.
Then lastly, the time and/or chapter adjusted problem has no suggested corrective action. It wasn't there before the build so why is it there now? Is it due to transcoding? I don't see any obvious changes to the timeline so where is the problem and how does is someone expected to troubleshoot it?
Shouldn't there be a glossary of error codes somewhere with at least some basic explanation?
Seems like a very clunky application, but when integrated with the rest of the Adobe Suite very powerful...if I can ever get a build to complete.
Any suggestions?
Message was edited by: Kevin Nay
So as not to waste anyone's time I'm assuming the transcoding adjusted the timeline/chapters and I was able to solve one problem by adding back in an ending chapter point. Remaining issue is the menu size however.

Encore is being phased out? I would be surprised if Adobe did not offer some kind of DVD authoring solution in it's place. I have not heard about this yet myself.
I have a menu size issue because, despite my reported file size being under 4.7G, Encore continues to report a menu size problem. Of course it doesn't say which menu or by how much it is exceeded. When I build it to DVD it waits several hours before reporting that there is a space issue. See below.
There is a file called woodstock-1.mp4. I can find no use of this clip at this point and it's not part of a timeline, yet Encore won't let it be deleted. Encore reports it's still in use. Surely there should be some way to track down any dependencies quickly.

Similar Messages

How do I identify and fix images Elements 10 believes are corrupt?

During the past three days I have had problems with the functionality of my Photoshop Elements 10 and received several messages indicating that the catalog is corrupt. How do I identify and fix images Elements 10 believes are corrupt?

Thank you for the prompt reply unfortunately the fix did not work.
Let me provide some more information that may help you diagnose this problem.
I run Elements on a PC. The operating system is Microsoft Windows 7 Home Premium. The System Type is x64-based. The processor is AMD A8-3850 APU with Radeon(tm) HD Graphics, 2900 Mhz, 4 Core(s), 4 Logical Processor(s). The Hard Drive is 1.81 TB, and 1.5 TB of this is free. The Ram is 16 GB. Everything else works great.
I have used Photoshop Elements for about 10 years, during which time I have upgraded to newer versions 5 or 6 times. I have used Elements 10 during the past 2 years. I already bought Elements 12 but I am trying to repair this issue before I upgrade to it. I have approximately 65,000 photos in my catalog. All but the last 2,000 are backed up.
During the past few days I encountered several problems with the functionality of my Elements 10; all errors provide messages indicating that the catalog is corrupt. Forexample, when I edit a photo in my catalog, the thumbnail image of the newly edited versionwill not display. When I imported new photos, the thumbnail image would not display. In all cases the photo image was replaced by a ?.
I tried to correct the thumbnail problem by repairing and optimizing the catalog. In either case I received the same message that the catalog had not been repaired/optimized because some images were corrupt. However, despite this message, the thumbnails for the newly imported photos appeared but the thumbnails for the recently edited photos still have not.
Currently, I cannot import new images, edit, delete or even stack photos. I can still view, search for, copy and delete photos. When I try to import a photo a new photo I get the following messages - ”the requested change could not be completed because the current catalog is corrupt. You can attempt a repair in the file catalog dialog." - "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types or the files are already in this Catalog." and "The catalog could not be repaired, if you have a recent catalog backup, you should restore it."
I have visually inspected the catalog and found about 25 recently imported photos that have a thumbnail image but lack the photo's id (i.e. img_3075.jpg would be replaced with ?). They are my photos from my camera and no different that the other 300 images I imported at the same time. However, these images in the catalog are blurry. When I check the image in the My Pictures folder the image is fine and properly located between img_3074.jpg and img_3076.jpg. I attempted to reconnect but received a message that there are no files to reconnect. I cannot delete the images from the catalog and If I delete them at the source (in the file folder) they still remain in the catalog view.
Howdo I identify and fix images that Elements believes are corrupt?
Thanks in advance for any thoughts.

How can I identify and delete duplicates on the latest version of itunes?

How can I identify and delete duplicates on the lastest version of iTunes?

The show duplicates/show exact duplicates features have been left out of iTunes 11. Rumor suggests they will be restored in the next build. In the meantime I have written two Windows scripts to make playlists of Duplicates and Exact Duplicates, either from a selection of tracks or the entire library. Note that, as with the iTunes feature, this list makes no distinction between "originals" and "dupes", you have to decide which is which.
There is also my DeDuper script for automatically removing duplicate copies but keeping one remaining copy of each set. This can preserve ratings, play counts, playlist membership, etc. which are lost in a manual clean up. Please take note of the warning to backup your library before deduping. See this thread for background on deduping and the script.
If you want to manually remove duplicate tracks use shift-delete to remove selected tracks from the library as well as the playlist. Keep one of each repeated group of files and don't send the others to the recycle bin unless you are sure that there are multiple files on the disc as opposed to multiple entries to the same file. Same advice to backup applies.
tt2

How can I check and change the size of photo or doc in iPhone or any other app

How can I check and change the size of photo or doc in iPhone or any other app

You would need software form a third party to have this option. The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option. You have to purchase it, but it will give you more advanced options than the software that came with the printer.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How do I identify and delete duplicate photos in iPhoto. It is so simple on iTunes

How do I identify and delete duplicate photos in iPhoto? It is so simple on iTunes

There really is no easier way than to use Duplicate Annihilator. It costs about $8.00 but will save you lots of time.

How can I identify and remove duplicate file (audio & photo)

How can I identify and remove duplicate file (audio & photo)? I have quite a few libraries created as backup files.

Terence,
Yes, the duplicates appear in the iPhoto window. I have folders with same name occuring two or even three times sometimes with exactly the same set of photos (ie photos with the same ID) and sometimes with a limited set of photos. Other folders appear only once.
I normally take my MacBook with me if I'm shooting a lot of photos, such as on holiday, and then want to transfer them to my iMac when i get home. Other times I transfer the camera's memory stick directly to my iMac.
I have great difficulty transferring the photos from my MacBook to my iMac. I don't want to store my photos on my iDisk due to the length of time it takes to upload them.
Thanks again.
Simon

How to create cube and measure in sql?

How to create cube and measure in sql?

Cubes, measures and dimensions are created in the AW using the Java API for Analytic Workspaces or through XML documents that are processed by this API. SQL commands are not available for creating cubes, measures or OLAP dimensions.

How do I identify and install latest RAW plug in for elements 10 for Sony A 7 mark 2

How do I identify and install latest RAW plug in for elements 10 for Sony A 7 mark 2

Elements 10 is too old for this new camera. It can't be updated to the ACR 8.5 version, you would need PSE12 or 13.
Camera Raw plug-in | Supported cameras
You can download the free Adobe Dngconverter which can batch convert whole folders of your Sony raw files to the DNG raw format that your PSE10 can handle.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?

How To Change Hyperlinks And Nav Menu Colors

I continue to see people stating that it's impossible to change hyperlink colors and navigation menu colors until after you publish your site. This is not true. It's quite easy to update your templates with the colors YOU want and when you update the template, you never have to mess with any post-processing. You make a new page? Your colors are already there.
I've gone over this before in this thread:
http://discussions.apple.com/thread.jspa?messageID=3288533&#3288533
But I'll go over the quick and dirty version here as well. Those who want more detail can post a question and I'll elaborate.
First, do you know how to get into iWeb's inner folders? You right click or control click on your iWeb icon and select Show Package Contents from the pop-up menu.
Step 2
Once you've done that, you'll see a new Finder window that shows a folder called Contents. Open that and then open the next folder Resources. Within Resources there's a folder named Shared. Open the Shared folder.
You're now looking at your collection of iWeb template files. You'll notice that each template has seven individual page files - each file defines the layout and styles for the page for which its named. This is actually one of the two places where you'll find the data/images that make up your iWeb pages. This location only contains the images. Now I'll show you were to find the data file.
So you're currently here:
/Applications/iWeb/Contents/Resources/Shared/
You want to go here:
/Applications/iWeb/Contents/Resources/English.lproj
Now if you speak another language and your Mac's system language is set to the language you speak, substitue English with that language. If your system is set to English regardless of the language you speak, and you use the English templates, then stick with the English folder.
When you're in the English.lproj folder, you will see seven sub-folders and one file named TemplatesInfo.plist. TemplatesInfo.plist is the file that registers the templates and tells iWeb what you've got in your collection. But we don't care about that file for now. We're after the template data files.
The seven sub-folders are aptly named for each of the seven page-types as you can see. Open the About Me folder.
Now you will see an "about me.webtemplate" file for every template you have in your collection. Good job. You've learned something new. Move on to Step 3.
Step 3
If you haven't decided yet, now's the time to decide which template you'd like to update. If you're just along for the ride to learn something new, no worries. We won't do anything you can't undo.
Pick a template file now. Perhaps you chose the White template, or:
White About Me.webtemplate
Right click or control click on this file and select Show Package Contents from the pop-up menu. This will launch a new Finder window that displays the contents of the White About Me.webtemplate file.
You will likely see a handful of different files, but the file you want is the one named Index.xml.gz.
Index.xml.gz is the brain behind the template. Within this file are all the settings for the page you chose and it's really not hard to find what you want and change it. So let's take a peek.
Step 4
Double-click the file Index.xml.gz. This will reveal a new file named Index.xml. You might have to scroll down in your Finder window to see it. Rename Index.xml.gz to Index.xml.gz.backup in case you screw things up, you have your original.
Now, open Index.xml with TextEdit. Do not open the file with a code editor unless you have already formatted the file.
When the file opens, you'll notice it's one gigantic jumbled mess of stuff. No worries, we'll straighten that out. All you need to do is a find/replace.
Find all instances of: ><
And replace with:
<
The line break is important so maybe just copy the lines right out of this post. When you replace all of those, the file will be far more easy to view.
Assuming you've completed that step. You're basically ready to make your change and test it out! Not hard ey?
So let's say you want to change your hyperlink color from grey to blue. Search for this string:
BLDefaultHyperlinkCharacterStyleIdentifier0
When you find that string, you will see a few lines below it, two lines that look similar to this:
<sf:fontColor>
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r=".8" sfa:g="1" sfa:b="0.4" sfa:a="1"/>
This is how the template specifies color. It's RGB100. Your Mac came with a program called Art Director's Took Kit and that application can tell you the RGB100 values for any color you want. Tinker with that and you'll have a lot of fun with this.
So I picked out a nice royal blue for you. The RGB100 values for it are:
R:0 G:25 B:100
What you need to do is update the color line to match those values:
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g=".25" sfa:b="1" sfa:a="1"/>
Notice that you specify these in terms of a percentage, where 25 became .25 and 100 became 1.
Step 5
Save your file. It's time to see your work in action. Open iWeb if it isn't open already and create a new page using the template you've just altered. If you altered the White About Me page, then select that and create the new page.
It there are hyperlinks already on this page, you should already see that they reflect your new color. If there aren't any hyperlinks, then type some text and create one. You should see your new link color right away!
Now if you don't see the new color, either you picked the wrong page or you neglected to rename the Index.xml.gz file a few steps back. If you did not rename that file, then it's still in control of your template. Rename it now and try again.
If you don't like that color, simply swap back to the TextEdit page and change it until you like it - switching back and forth between the file and iWeb to view your changes. Once you're happy, make note of the color you chose and make the change for the remaining six pages in the tempalte you selected. Just be sure to follow the steps for each page you edit. If you fail to see your change, again, check to see that you renamed Index.xml.gz.
Side Notes
For the more technical, rather than editing an existing template, you might want to duplicate and rename a template. This essentially creates a brand new one. If you're pretty good within Finder then go for it, just be sure that you duplicate the files in both locations:
/Applications/iWeb/Contents/Resources/Shared/
/Applications/iWeb/Contents/Resources/English.lproj/...
Choose a unique name for the duplicated template and change every single file so that the new name replaces the old one. You would have to register this new template in the TemplatesInfo.plist file as well, but I'm not going to get into that here.
The thread I referenced at the top has all kinds of search terms to find the other hyperlink styles (rollover and visited) and all the navigation menu styles plus a bunch of other fun stuff.
Now, it seems long, but that's because I wrote it well. The shortest version of this I've ever written was two sentences, but that was for a UNIX geek and he got it. It's just as easy for you, but I write it out so that anyone can do this, because anyone can. It's just not hard.
If you have questions about any of the steps, go ahead and ask.

Good. Okay here's how to apply a background color to your nav bar buttons. For example, my Aerolite template sets the selected page to a black background color. The rollover effect uses a gradient fill. I'll describe both of those here.
First, here are the navigation menu search terms:
navbaritem-style-normal-default
navbaritem-style-rollover-default
navbaritem-style-selected-default
navbar-pargraph
The first three set the button effects and text colors. The last one there sets the font, font size and other paragraph styles.
To change the selected page button background color, or gradient or image, first search for it using the search term above. Start from the top of the file because there are two instances of those terms, one where you can set the values, the other is only reference to the first and does not allow you to change settings.
When you find the search term, you might want to insert an empty line above it to help separate it from the rest of the code. You can also insert an empty line below the section. The end of this style ends with:
</sf:navbar-item-style>
Be careful not to mix that up with </sf:navbaritem-character-style>
Now, within this section, you'll find all kinds of settings... stroke, fill, character styles, etc. Notice you can change font color in there. But for this demo, you want to find the section that looks like this:
<sf:fill>
<sf:null/>
</sf:fill>
I'm assuming you're editing an Apple template that does not already have a fill effect. If it does have one, then your example might not look exactly like that.
To apply a color fill, change those three lines to these lines:
<sf:fill>
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g="0" sfa:b="0" sfa:a="1"/>
</sf:fill>
You can see that we've inserted the line that specifies color - something you should be familiar with by now. Here you can specify the color that will become the background of your nav bar button. This example specifies black. Easy no?
If you would prefer a gradient fill, then replace those three lines with this:
<sf:fill>
<sf:angle-gradient sfa:ID="SFRAngleGradient-1111" sf:opacity="1" sf:type="linear" sf:angle="0">
<sf:stops sfa:ID="NSMutableArray-1111">
<sf:gradient-stop sfa:ID="SFRGradientStop-1111" sf:fraction="0">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0.40" sfa:g="0.40" sfa:b="0.30" sfa:a="1"/>
</sf:gradient-stop>
<sf:gradient-stop sfa:ID="SFRGradientStop-2222" sf:fraction="1">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0.64" sfa:g="0.66" sfa:b="0.54" sfa:a="1"/>
</sf:gradient-stop>
</sf:stops>
</sf:angle-gradient>
</sf:fill>
Now, don't panic Here's what this is. The first line allows you to specify the angle of your gradient. Play with the numbers from 0 to 359 until you have what makes sense for your design.
Then, you will see two familiar lines again - the lines that allow you to specify color! The first line is the first color of your gradient and the second color is the second color of your gradient. That's all there is to it!
SECRET: It might be possible to add additional colors, not just two. Do you see the part sf:fraction="0" and sf:fraction="1"? These are gradient stops. I'm willing to bet that if you inserted a thrid gradient stop with a fraction setting of .5, you'd have a three-color gradient!
<sf:gradient-stop sfa:ID="SFRGradientStop-3333" sf:fraction=".5">
<sf:color xsi:type="sfa:calibrated-rgb-color-type" sfa:r="0" sfa:g="0.25" sfa:b="4" sfa:a="1"/>
</sf:gradient-stop>
I have never tried this - it just occurred to me as I was looking at this code. Big prize for the first person to prove the theory
NOTE: You will notice that the number 1111 and 2222 are within this code. iWeb XML relies on identification tags here and there. It's nothing you really have to care about except if you insert gradient fills in more than one area. Those numbers need to be unique so if you paste that code in for your selected page button and then paste it again for your rollover buttons, you'll need to update the numbers for the second button. Any numbers are fine. Use 3333 and 4444 for the second set, 5555 and 6666 for the thrid and so on. I often just type 4345781476 - doesn't matter.
Next lesson will be images.

How to correct spelling and grammar mistakes in Pages?

So I'm new to Mac's and the Pages wordprocessing software. Normally, in Microsoft Word, when something is misspelled or grammatically incorrect, the red or green line comes under it and you can right-click that to see options to correct the error. Pages also does the red or green line thing under incorrect words and stuff, but since you can't right click on a Macbook, how do find out what's wrong and how to correct it? Basically whats the Pages parallel of right-clicking to correct in Word?

Launch Pages.
Click "Pages" in the menu bar.
From the dropdown select "Preferences".
For additional info:
http://support.apple.com/kb/PH10319
https://discussions.apple.com/message/17227397#17227397
Pages User Guide:
Scroll up the page for contents.
http://manuals.info.apple.com/en_US/Pages09_UserGuide.pdf
Best.

Help! Safari and trojan? How do I identify and get rid of it?

Please help me understand and get rid of this—your expertise sincerly appreciated! I posted about this problem a couple of weeks ago, but got no response. I seem to have a trojan attached to Safari (my analysis). It delays or stops loading of all pages, thumbnails don't load (such as in ebay), overall response is slow or freezes, etc. My console shows the following sets of messages whenever I try to open a page:
4/13/11 8:27:14 AM Safari[286] iSkysoft: removeObjectFromDic: ReloadPage
4/13/11 8:42:16 AM Safari[286] iSkysoft: removeObjectFromDic: ReloadPage
4/13/11 8:57:22 AM Safari[286] iSkysoft: removeObjectFromDic: ReloadPage
4/13/11 9:12:23 AM Safari[286] iSkysoft: removeObjectFromDic: ReloadPage
4/13/11 9:25:18 AM Safari[286] iSkysoft: removeObjectFromDic: ReloadPage
4/13/11 9:25:19 AM Safari[286] iSkysoft: removeObjectFromDic: ReloadPage
4/13/11 9:25:45 AM Safari[286] iSkysoft: Add Button.
4/13/11 9:25:45 AM Safari[286] iSkysoft: Show Button: <SFSButton: 0x12b194a60>(146.0,46.0)
4/13/11 9:25:46 AM Safari[286] iSkysoft: disappearBtn
4/13/11 9:25:47 AM Safari[286] iSkysoft: Hidden Button.
4/13/11 9:25:55 AM Safari[286] iSkysoft: Show Button: <SFSButton: 0x12b194a60>(146.0,46.0)
How do I identify this iskysoft, where it is located, and delete it?? Please help if you can.
I have followed all (possibly-related) advice I could find in the forums, including deleting all safari extensions, repeated cache empty, reload safari from scratch, delete safari library folders as admin and user, scan with sophos and intenet cleanup, etc. Finder doesn't locate anything named iskysoft on my computer, but the iskysoft website has to do with video conversion.
The slowdown has lasted since the end of 2010, but I just discovered the console messages a few weeks ago, and have been trying to understand and deal with that since.
Thanks for your time and knowledge. I could really use the help!

Hi,
Try MacScan for malware.
http://macscan.securemac.com/
You are positive you haven't installed the iSkysoft software??
Purchased as a bundle by chance by another name?
http://www.squidoo.com/current-mac-bundles/144089781-Previous-Mac-Bundles
The slowdown has lasted since the end of 2010,
Maybe it's not the iSkysoft causing the slow down. Check to see how much free space there is on the startup disk.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 15% free disk space.*
Try using Spotlight (top right corner of your screen, the magnifying glass icon, to find the software.
Carolyn

How do you identify and remove add-ons/extensions

The explanation of how to remove add-ons tells you to click on menu (and then 3 parrelel bars) What menu is that? I figured out(by trying each and every menu until I figured out it was the tools menu. when I get to the last step it says click the remove button. There is NO remove button at that point (just an enable button which is the last thing I want to do. I am talking about the Cinema ploos extension. It represents it's self as an upgrade with many improved features, but all it is is an add bot that is noisy and obnoxious and they want a one time fee (extorsion) to remove it

Application Basics
Name: Firefox
Version: 33.0
User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.10; rv:33.0) Gecko/20100101 Firefox/33.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Cinema ploos
Version: 0.95.5
Enabled: false
ID: [email protected]
Name: DivX Plus Web Player HTML5 <video>
Version: 2.1.2.145
Enabled: false
ID: {23fcfd51-4958-4f00-80a3-ae97e717ed8b}
Graphics
Device ID: 0x6740
GPU Accelerated Windows: 1/1 OpenGL (OMTC)
Vendor ID: 0x1002
WebGL Renderer: ATI Technologies Inc. -- ATI Radeon HD 6770M OpenGL Engine
windowLayerManagerRemote: true
AzureCanvasBackend: quartz
AzureContentBackend: quartz
AzureFallbackCanvasBackend: none
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.frecency_experiment: 1
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141011015303
browser.startup.homepage: http://dvd.netflix.com/Queue?lnkctr=mhbque&qtype=DD
browser.startup.homepage_override.buildID: 20141011015303
browser.startup.homepage_override.mstone: 33.0
extensions.lastAppVersion: 33.0
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d9: 3
media.gmp-gmpopenh264.lastUpdate: 1414115832
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1414115827
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1414111485
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.donottrackheader.enabled: true
privacy.sanitize.migrateFx3Prefs: true
storage.vacuum.last.index: 0
storage.vacuum.last.places.sqlite: 1414111483
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSMIME
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSSL
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSUTIL
Expected minimum version: 3.17.1
Version in use: 3.17.1
Experimental Features
Above is the results of your troubleshooting request. The extension I want to remove is called Cinema ploos 0.95.5 I currently have it disabled, but want to get rid of it altogether. One note I am on an I-mac.

How do I identify and get the playlists to migrate to my new computer?

I have an external harddrive with all my ITunes playlists on it. The library migrated OK. How do I identify the playlists and get them to migrate to my new computer???

You would have had a quicker response if you had posted in the iTunes forum.
You need to copy the iTunes folder, the one at the top not the iTunes Music library folder to your new computer to move your playlists.

How can I identify and delete duplicate photos

is there a way to identify and delete duplicate photo's in I photo?

No one is suggesting that you download third party "crap". What was suggested is that you download a well established and supported 3rd party application. As to why there isn't a "'delete your stupid duplicate photo' option", you'll need to ask Apple that. Apple aren't here. This forum is for Users to help other Users. As to why you import stupid photos, you'll need to ask yourself.
Regards
TD

How can I identify and delete duplicate photos using latest version of Elements? (Win 8.1 64 bit)

I have several thousand digital photos of which several are duplicates. Can I identify and remove them using Photoshop Elements 13?

See:
Elements Organizer Help | Search options to find media

How to correctly identify and measure menu sizes

Similar Messages

Maybe you are looking for