How to correctly import .mts into FCP with full 5.1 audio

Well, I've found a couple of solutions to this so far. I'm not sure if this qualifies as a stickie, but it might be useful to others as well.
Getting the audio from new consumer video cameras, for example my Sony HandyCam, which have 1080p video, and 5.1 surround sound audio into FCP can be a bit tricky. The hard part is the audio. FCP will import the camera's .mts files fine using Log and Transfer, but the audio is mixed down to stereo.
This solution was posted over at Ken Story's FCP boards:
http://www.shedworx.com/hd-information/surround-sound
Although I haven't tried it, it looks very good.
I actually tried the following method, using Parallels (i.e., some form of Windows):
I used TSMuxer in Windows to demux the .mts files. I then used BeLight which is a front end GUI for BeSweet **(you have to download both, and drag both the BeSweet application and the azid.dll file into the BeLight folder before you run). This separates the resulting .ac3 file into 6 mono .wav files.
I then just imported them back into FCP and all was well.
The advantage of this method is that it's free, but the major disadvantage is that it only runs in Windows, so you have to have a PC or emulator. So next time, I'll likely give VoltaicHD a spin.
Hope this helps anyone trying to do the full import to FCP

Oooof! Does this mean that we have to do this procedure, using VoltaicHD, for each and every one of the ~1750 clips with 5.1 surround I have from my trip to China? Perhaps I misunderstood, but it looked like this process was a one-clip-at-a-time process?

Similar Messages

Mts files cannot imported with audio in pro cc6. how i can import mts files with audio?

when i am importing mts files in pro cc6. every time it is being imported without audio. though original mts files have audio. how can i import mts files with audio in cc6?

To clarify Media Browser suggestion - very important that you copy ALL content from SD card to hard drive before importing using Media Browser. If you only have the .mts files alone, there is stuff missing that is needed for Premiere to properly interpret the video/audio.
Thanks
Jeff Pulera
Safe Harbor Computers

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

How can I import .mts files into Final Cut Studio from my Sony High Def Camcorder

How can I import .mts files from my Sony High Def camcorder into Final Cut Studio?

Also see: https://discussions.apple.com/community/professional_applications/search.jspa?pe opleEnabled=true&userID=&containerType=&container=&spotlight=true&q=.mts

How do I import binary data files (with header info) into DIAdem?

We have lots of data acquired by nCode datagate. Files are binary data with header info. How do I import this into DIAdem? Typical (short) file attached. Also of interest, can I stream data from Sony PC208/SIR1000 recorders?
Attachments:
Propshft.dac ‏4 KB

I have successfully imported your file into DIAdem using the nCode file filter included with DIAdem. You might have to make that file filter known to DIAdem by following these steps (this assumes you have version 8 of DIAdem):
1. Go to the 'Window' menu in DIAdem and select 'Close all'
2. Go to the 'Settings' menu and select 'GPI-DLL Registration'
3. Click the 'Add' button in the window and select the 'GfSnCode' DLL in the 'DIAdem/AddInfo' directory
4. The program will prompt you to restart.
5. After you have restarted DIAdem, go to the DATA icon, select 'File - Open' from the DATA menu and in the dialog that appears, choose 'nSoft Data File Format' in the 'Files of type:' field.
6. Select your data file and load
That's it.
With regards to your Sony reco
rder data, I would need to get my hands on an actual data file to try it out. In general, DIAdem can import ANY binary file format by creating a header in the 'File - Import via header' section in DATA. If you have lots of data files from the SONY recorder, a DLL can be created for that specific file format with the free DLL toolkit included with DIAdem.
Leave me a message here if you have any additional questions.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

How do i import videos ive take with iphone into my iphoto library. iphoto only shows my pictures not the videos ive taken

how do i import videos ive take with iphone into my iphoto library. iphoto only shows my pictures not the videos ive taken

Have a look here...
http://support.apple.com/kb/HT4083

.MTS into FCP 7

Hello,
How can I import ".MTS" files into Final Cut Pro 7? I dragged them from my camera's SD card and I'm having trouble importing them. They are not being recognized by FCP. I tried converting them using MPEG streamclip - but that didn't recognize the format either. The files played on VLC but were of a low quality.
Is there a way to import those files on FCP so I can start with the editing process? Or is there
another "free" converter out there I can use?
Please help me.
Thanks!

Thank you for your reply.
Unfortunately, I only dragged the .mts files - will it be of the same quality after conversion if I use Voltaic? Also, does that usually come with an activation key? Is there a free version of this software?
Thanks again!

Importing Flash into FCP

I have Flash Pro 8 and FCP Pro HD and am still trying to learn both.
Can I create a piece in Flash and import it into FCP? If I need to upgrade FCP, I will - I just need to know if it's possible, and how to do it.
thanks a lot.
j.

On a related question, I have a number of flash animations for a client, a comic, and the movie is in 5 parts...I have the latest version of FCP and of Flash, and I am having a lot of problems exporting to quicktime and importing to FCP. I have tried export movie>quicktime and quicktime movie, with a variety of codecs (animation, motion graphics, DV), and every time some tweens(individual) are dropped, and some sounds from the flash movie. There must be a way to just clone what I can see in my swf into FCP? If anyone knows how, please help.
(and please, dont tell me to learn the apps as I have a professional level knowledge of both.)

Aspect ratio importing DV into FCP X

Can someone explain how DV format works (I think I understand this) and how importing DV into FCP X works (I definitely don't understand).
I have some old PAL DV files which I want to compress using Compressor, with the aim of later importing them into FCP X. I can compress them in one of two ways: compressing to 720x576 with the standard PAL aspect ratio, so they appear (eg. in QuickTime Player) as 768x576. Let's call this 'Old Style'. Or, I can compress them so they have square pixels, and genuinely are at 768x576. ('Square pixels').
Both display using QTP7 as 768x576, but Square Pixels is compressed slightly so there is more of the picture visible at left and right of the screen. Objects in the image are therefore thinner left-to-right than in Old Style.
Now, if I import them into FCP X, in the event browser Square Pixels still displays as 768x576 and looks just as it does in QTP. But Old Style is now wider than 768x576 and has the extra bit of picture that Square Pixels displays. So they're both displaying the same image, but Square Pixels has it compressed to fit into 768x576, whereas Old Style has it wider, and consequently people are fatter left-to-right.
When I import these events into a project, things change again. Old Style appears exactly as it does in the event browser (ie. about 786x576, with the whole image displayed). Square Pixels stretches the image north-south, and this means that part of the top and bottom of the image are chopped off.
What is going on? Is there a website which can explain this clearly? Which is the better format for me to compress my video into?
Cheers,
Martin S Taylor
FCP X 10.1.2
Compressor 4.1.2

I don't understand your question?
DV footage on DV or mini-DV tapes is already digitised . . . . hence the name DV or Digital Video.
If you have a DV camera or deck you can plug it into your Mac via FireWire and import the footage straight into FCP X.

Can't import Media into FCP X

In the last week or two when I try to import media into FCP X I end up with a very dark and locked import screen. The only way I can recover is to force quit FCP X. It doesn't always happen but it is getting more and more frequent.
I have not updated to Marverik and I'm running the latest version of FCP X on the same iMac I have used since installation.
Any suggestions beacuse it really is starting to beome very, very frustrating.
Thanks

They system is hanging up, waiting on some command to finish, which is not able to. So let's look at ways to fix this. Becasue you never want to do an upgrade to fix problems. Only upgrade a proerly working system. Otherwise, you may just be hauling old problems into a new envoronment, and making things worse. I've seen it a lot over the years.
First, verify that all of your drives have at least 15% of their total capacity as free space. Not enough free space on any dirve can cause similar odd behaviors.
Second, you need to do some housee cleaning. Start by downloading and running the free application "Preference Manager" from Digital Rebellion (dot com). Use it to trash the FCPX preference files. It is easy and safe to you. None of your media or projects will be touched. After that, run Disk Utility to "Repair" all of your drives (ignore "Verify", total waste of time).
If none of that helps, I'd recommand you download the free application "FCS Remover" from Digital Rebellion. Use it to uninstall FCPX. Some folks say to just move the app from the Applications folder to the Trash. That leaves a bunch of other files hanging around that could be bad. Use this app. Once you've uninstalled FCPX, launch the App Store, go to the Purchases section, and FCPX will have an "Install" button. Reinstall a fresh copy, see if that helps.

How can I import video into iMovie from a DVD?

How can I import video into iMovie from a DVD?
Thanks,
Doug Davis

You can do this with a free app called MPEG Streamclip and a $20 quicktime component from Apple.
See detailed instructions here.
https://discussions.apple.com/docs/DOC-3951

How to get quicktime movie into FCP X?

how to get quicktime movie into FCP X?

What exactly are you trying to do that using the import files function won't accomplish?
Russ

Importing DVD into FCP

video comes in fine but audio does not playback files are coming in as QT's Can anyone help?

Copy the VIDEO_TS folder from the DVD to your computer.
Open MPEG Streamclip. Go to File > Open Files. Choose VOB 1.1 - you dont need VOB.1 usually.
You will be asked if you want the other VOB files -you do ( depending how long your DVD is)
You might be asked if timecode breaks should be fixed - say yes.
Go to File > Export as QuickTime. Right at the top , you will see Apple Motion JPEG A.
Click on it and choose DV NTSC or PAL as appropriate. Set Quality to 100%.
Click Make Movie at bottom right. Wait.
Bring it into FCP with your Easy Seup on DV NTSC (or PAL) with Sequence Settings to match.
Edit to your hearts content. It really is that easy

How do you import photos into iPhoto from an iPhone?

how do you import photos into iPhoto from an iPhone?

1 - with iPhoto open connect the iPhone to your Mac with its USB cable and import.
OT

How do I import SWC files created with Flex info Flash CS4?

I've created very nice UI component using Flex 3 and I have exported it into a SWC file.
How can I import it into Flash CS4 to use it there?

Hmm... if you happen to be familiar with C#, then you may probably know about the problem of P/Invoke (this is a command that lets you access Windows API through C# code, which will apparently prevent it from functioning on other OSs).
What happens with Flex framework is somewhat similar to this. I.e. it relies to much on the features of Flex compiler and the components of the framework create a lot of cross-dependencies, which makes them barely usable outside the framework.
So, if you have time and doing this just as a matter of learning, I'd suggest you start an AS project in Flex builder and advance with it compiling it both with Flex and Flash to see if there are any differences (basically, once you see it doesn't compile / doesn't behave as you'd expect in Flash, you'll know you used something that is specific to Flex). These would be mostly meta tags, like [Bindable] for example.
And, if you need any tutorials on how to code in pure AS, then, well, there are really to many So that you can even choose what's appropriate / goes better with your learning habits.
If you like video lessons, there're tons of them at gotoandlearn.com, if you prefer reading documentation, here you go: http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/class-summary.html
if you prefer forums / written tuts, then, kirupa.com, actionscript.org, flashkit.com as well as Adobe forums will provide you with a lot of information.

How to correctly import .mts into FCP with full 5.1 audio

Similar Messages

Maybe you are looking for