How to correctly render quicktime with two pop and timecode?

I have a feature finished and need to create the quicktime for the composer and mixer. But I have to add a new time code generator as well. So, at the moment, I have a timeline starting at 58:50 and the feature starting at 01:00:00. It is selected as non-drop.
I was told by my online editor that I would have to either Nest the sequence and then generate my quicktime or I would have to create a quicktime from this sequence and then drop the quicktime on a new timeline and then create a quicktime again. I may be wrong, but it seems that both of those would be uneccesary as shouldn't I be able to just make the edited sequence into the new quicktime with an added timecode (via the generator)? Also because if I have my original timeline at 58:50 and then nest it on a new time line would the new timeline start at 01:00:00 and then generate a mixed up timecode?
So, with all that in mind. I am just wondering what my steps from here are in:
1) How to add the two pop (I was told to go into the effects bin and find the Bars And Tone and extract two frames at 59:58:00 and 59:5801 and I gues drop those two frames into the timeline.)
2) Add the timecode generator ( i know it is available somewhere in FCP)
3) And how to then correctly render a quicktime for the post gang.
After that, I drop the drive and project off to the online guys and they will do the OMF and create the master HD project.
Thanks in advance.

Hi Andy,
Thanks for the reply but am not sure what you mean by removing in and out points and dragging from browser to a new sequence. How does one technically remove an in and out point? And is this a strategy that will somehow enable me to be able to nest the project?
I remember once a long time ago I tried to nest a large project (probably 70 minutes) and I tried highlighting the whole thing (which I may be doing the long way as I have to SHIFT click clip one and then SHIFT click the last clip and then try and find every clip in between that didn't get highlighted - which can take some time) and it would still not nest the project (kept coming up with some warning). So, I ultimately had to nest it by copying and pasting the film in 5ths onto their own sequences and then nesting them and then nesting the nests!
So, I am hoping to do a quicktime for my post guys will not be as long winded....
Thanks.

Similar Messages

How can i build table with two user name columne ?

How can I build view with two columns for user name ( one create and the other
Can change also )
And to display full name ( the user name is the key but not display ) ?

Hi,
Creating View
     From initial screen of data dictionary(T.Code: SE11), enter the name of object i.e. view.
     Select view radio button and click on the push button.
     Dialog box is displayed for types of views.
     Select the view type.
     On the next screen, you have to pass following parameters.
     Short text
     In the table box you need to enter the table names, which are to be related.
     In join table box you need to join the two tables.
     Click on the TABFIELD. System displays the dialog box for all the table fields and user can select the fields from this screen. These fields are displayed in the view fields box.
     Save and Activate: When the view is activated, view is automatically created in the underlying database system. As long as the table exists in the database, the view also exists (Unless you delete it).
Regards,
Bhaskar

How to manage one library with two accounts

how to manage one library with two accounts

you can only be logged into one account at a time on the iTunes store. However, you can authorize your computer for both accounts, making your computer work with both. In the menu bar just click [Store > Authorize Computer]

HT4993 Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

Replaced my iphone 5 with new one because my first one the volume buttons stopped working. Now my contact list is all wrong. It's correct on my I pad but don't know how to correct it on my phone. And my email is loading hundreds of old emails,?

If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac. I work with two screens and now I seem to have programmes at the top of both screens which I didn't before. any advice?

I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?

Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you...

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

How to display polygons both with line contour and filled interior?

How to display polygons both with line contour and filled interior?
Java3D 1.3, Java 1.4.1-rc

Hi,
I just started with Java3D last week.
I assume you mean drawing polygons with outlines (wireframe) in one color and polygon face filling with another color. If so, I've got the same question! (I usually think of "contour" to refers to plotting surface intensity of independent data like temperature or elevation, but I don't think you mean this.)
The only solution I've found so far is to make two shapes with the same geometry.
Here's an example - an outlined and filled cube. I made it using a generalize class DualShape which is two shapes with the same geometry, but one filled and one as a line.
It works, although I can't say I understand the setPolygonOffset(), knowing what value to set. Without the command, the depthbuffer can't consistently decide which should be in front between the fills and lines so it looks bad.
I certainly think it would be nicer to do both internally, like:
pa.setPolygonMode(pa.POLYGON_LINE || pa.POLYGON_FILL);
And then have setFillColor and setLineColor for each.
I don't know why they don't allow this - maybe OpenGL can't do it like this so Java3D follows.
If anyone has any better ideas I'd like to hear about it.
Tom Ruen
class DualCube extends DualShape // cube with outline and fill colors
public DualCube(float ax, float ay, float az, //cube lower corner
float bx, float by, float bz, //cube upper corner
float br, float bg, float bb, //border color
float fr, float fg, float fb) //fill color
setGeometry(new CubeGeometry(ax,ay,az,bx,by,bz),br,bg,bb,fr,fg,fb);
class DualShape extends BranchGroup //general shape with outline and fill colors
Appearance ap1,ap2;
PolygonAttributes pa1,pa2;
ColoringAttributes ca1,ca2;
Shape3D s1,s2;
public void setGeometry(Geometry geo, float br, float bg, float bb, float fr, float fg, float fb)
//filled shape:
addChild(s1=new Shape3D(geo, ap1=new Appearance()));
ap1.setPolygonAttributes(pa1=new PolygonAttributes()); pa1.setPolygonMode(pa1.POLYGON_FILL);
ap1.setColoringAttributes(ca1=new ColoringAttributes()); ca1.setColor(fr,fg,fb);
//lined (wire) shape:
addChild(s2=new Shape3D(geo, ap2=new Appearance()));
ap2.setPolygonAttributes(pa2=new PolygonAttributes()); pa2.setPolygonMode(pa2.POLYGON_LINE);
ap2.setColoringAttributes(ca2=new ColoringAttributes()); ca2.setColor(br,bg,bb);
pa2.setPolygonOffset(-1000); //Uncertain what "float" value to use!
class CubeGeometry extends IndexedQuadArray //cube geometry data
private static final int[] faces =
0,3,2,1,
0,1,5,4,
1,2,6,5,
2,3,7,6,
3,0,4,7,
4,5,6,7
private static float[] verts = new float[24];
public CubeGeometry(float ax, float ay, float az, //lower limit
float bx, float by, float bz) //upper limit
super(8, IndexedQuadArray.COORDINATES , 24);
int n;
n=0; verts[n]=ax; verts[n+1]=ay; verts[n+2]=az;
n=3; verts[n]=bx; verts[n+1]=ay; verts[n+2]=az;
n=6; verts[n]=bx; verts[n+1]=by; verts[n+2]=az;
n=9; verts[n]=ax; verts[n+1]=by; verts[n+2]=az;
n=12; verts[n]=ax; verts[n+1]=ay; verts[n+2]=bz;
n=15; verts[n]=bx; verts[n+1]=ay; verts[n+2]=bz;
n=18; verts[n]=bx; verts[n+1]=by; verts[n+2]=bz;
n=21; verts[n]=ax; verts[n+1]=by; verts[n+2]=bz;
setCoordinates(0, verts);
setCoordinateIndices(0, faces);

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

How to create a matrix with constant values and multiply it with the output of adc

How to create a matrix with constant values and multiply it with the output of adc

nitinkajay wrote:
How to create a matrix with constant values and multiply it with the output of adc
Place array constant on diagram, drag a double to it, r-click "add dimension". There, a constant 2D double array, a matrix.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

How to create 2D array with 3 rows and unlimit column?

how to create 2D array with 3 rows and unlimit column?

Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG ‏7 KB
2D-array_values.PNG ‏13 KB

Using windows vista with two users and I can only open books with adobe digital editions on one account?

using windows vista with two users and I can only open books with adobe digital edition

You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.

How can I Make just one color pop and the rest a black and white photo??

How can I make just one color pop and the rest of the photo black and white?? I'm using iphoto...

3rd party image editors like Photoshop Elements for Mac can do it:
Click to play video screenshot
Or use it to keep an object in color and the rest B/W.
Click to view full size
OT

How to correctly render quicktime with two pop and timecode?

Similar Messages

Maybe you are looking for