How to count with two char and calculate KF as per the count
Hello All,
I have a requirement where I need to display the data as per mentioned below chart.
Region is on the row side, Vendor, Material and Value on column side.
I need to show Number of Vendor belongs to Global,Regional and local, Similarly for Material also. As I want to show only the Number of vendor and No of Material for that Vendor and particular region. finally I need to show the value for the Vendor and material.
I need to do it on Query level this counting option.
Region Vendor Material Value
Global 10 2 500
Regional 5 3 400
Local 6 4 540
Can anyone help me on this regards
Thanks
Hi,
Can you try if this works:
Place Region in rows
In the columns, create a formula to count Vendors : Keep just 1 in the formula and in Aggregation tab select Exception Aggregation as Counter for all detailed values and select Reference characteristic as Vendor
Create a formula to count Materials : Keep just 1 in the formula and in Aggregation tab select Exception Aggregation as Counter for all detailed values and select Reference characteristic as Material
Also include the Key figure for value in the column
Similar Messages
-
How to replace one char with two chars in email address policy?
I very much like to replace the 'ß' char in the surname with 'sz'. However, applying filter '%rßsz%[email protected]' on 'Preußig' leaves me with '[email protected]'.
So, how do I replace one char with two chars in email address policy?As far as I know, your only solution is to manually create such addresses instead of using e-mail address policy.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How to sync with two computers not at the same time, I'm registerd with one computer
How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync -
Integrtion Scenario using BPM with two sender and multiple receiver
integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech -
My ipod screen is cracked and i can't sync my ipod to itunes because it is locked with a password and i can't enter the password because the heat sensor is messed up on the ipod becasue of the screen and i don't want to restore it and lose everything. What can i do?!
All you can do is to restore and thus erase the iPod unless you can get a data recovery company to preserve the data.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
How do I get rid of the iCloud Backup alert message? I cannot do anything with my iPad and cannot get rid of the alert. I have plugged in the iPad with Wifi on, but it won't reset. Thanks
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?
You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.
-
We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?
You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently. -
I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?
Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you... -
I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how. I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click. Help?!!
If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it). -
I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
thanks!Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings -
Pie chart with two measures and date dimension navigation not working
Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
VHi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..??? -
using windows vista with two users and I can only open books with adobe digital edition
You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID. -
When using printer Epson R1900 with Aperture 3 and if I mistakenly choose the wrong paper such as, epson's luster instead of glossy, does that change the exposure? Like make it too dark one or two stops!
Hi,
If you choose the incorrect settings for printing, yes - the print quality will be affected.
Different papers absorb the ink differently, so you can end up with prints that are too light, too dark, or have a colour cast if you make incorrect choices in your Aperture or printer settings. -
How can I synchronize two iphones and two ipods on one MAC
How can I synchronize two iphones and two ipods on one MAC. My wife and i each have our own iPods and iPhones but share one MAC.
What do you mean by synchronize; music, apps, calendars, email, etc? Do you two share the same Apple ID on all devices? An Apple ID can support up to 5 computers and many iDevices.
I hope this helps.
Maybe you are looking for
-
Drop table if exists in sql statement
Oracle: 10G Is there a way to check if table exist and then only drop table. Something like: drop table (select table_name from user_tables where lower(table_name) = 'o2i_filing_dest')
-
Hi All, Kindly help me in solving this issue. Portals report layouts can be customized. When the user chooses to export the customized reports to Excel, only the standard layout (hard coded layout for each report) is exported to Excel and all the cus
-
How can I move my iphoto Library to another hard drive?
I would like to move my iphoto library to another drive. I've already copied it to the other drive, do I now just delete it from the internal drive? If so how does iphoto know where to find the photos?
-
My daughter pressed a pop up on her ipod touch that she is now receiving my texts/imessages meant for my iphone. I still receive my texts/messages, but she is receiving them as well. I believe somehow my phone number is now affiliated to her ipod to
-
Dynamically pass subject via mail adapter without using mail package
Hi, We have requirement to pass the Dynamic variable as Mail subject we can't use Mail Package as we need to capture the data from Dynamic SOAP header Data from incomming channel Dynamic SOAP Header variable (XHeaderName1) comming from Sender SOAP ch