How to covert the contractor to employee(Hire a contractor)

Hi All,
I have entered a contractor(contingent workes) in belgium business group via maintain contracts.Please let me know the steps(navigation) to hire this contract so make him employee.I tried using the manage contracts but this contractor is not appearing there.
Thanks,
MP.

As Brajesh Sinha mentioned, you cannot convert a Contingent Worker to an Employee without first entering the Contingent Worker's placement. You need to do this:
1) *HRMS Manager > People > Enter & Maintain > Others > End Placement.  Enter an end-date and terminate the placement.
2) *HRMS Manager > People > Enter & Maintain. Date-track forward to the day after the end-date entered in 1. Query the person.  Their person type should be 'Ex-Contingent Worker.
3) Select the 'Create Employment' action.
4) Enter any required fields and save.
5) The person's Person Type should be Employee.Ex-Contingent Worker.
Does that work? If not, please provide details of where this process fell over, ie, any errors you encountered. Thanks.

Similar Messages

  • How to covert the Digits into Barcode

    hi friends,
    how to covert the numbers into Barcode notation in java
    pls help me out.

    Hi,
    See http://jbarcode.ronisons.com/doku.php
    Hope that help,
    Jack

  • How to delete the list of employee on SAP system?

    Dear all,
    I want to delete the list of employee on my SAp system but I don't know how to do this, What's the transaction code that use to delete mutil employee on SAp system?
    Please help me to do this.
    Thanks and Best Regards,
    Huyen Nguyen

    PU00 is the tocde for Single PERNR
    and check RPUDELPN  report for mass deletion of PERNR
    but dont do in production system
    Edited by: Sikindar on Aug 14, 2009 8:18 AM

  • How to get the list of employees whose Sal on hold and who are active

    HI Experts,
    We are trying to extract a report,where the list of employees whose  salary was hold  and who are active in a particular month.
    Please advice.
    Regards,
    V Sai.

    Hi,
    I can think of two different solutions. You can choose the one as per the requirement.
    1. Creating  a report of locked employees as on date.
      Active employee that are locked in Infotype 3.
    As infotype 3 doesnt have different Begin data and end dates, we cannot have historic data/report.
    2. Creating a report for payroll not run.
    Getting a list of active  employees
    Check the RT of the employees for previous payroll runs.
    You can use the selection criterila for dates/months.
    Hope this helps.
    Param

  • How to get the list of employees whose full n final setellment done in mont

    hi  Experts,
    We are trying to get the list of employees whose full and final settelemnt were done in a particular month.
    Is there any way to get the employees whose fnf was done in a particular month.
    Please advice.
    Regards,
    V Sai.

    Hi Experts,
    We are trying to get the list of employees from sap for whom  we ran the FNF  in the current month.
    For example,if an employee left the organisation in the month of April,we  are holding the salary of the employye.
    After approvals from different departments,may be after 2 months we change the control record to april and we run the payroll for the employee.later we change the control record to current period.  In posting we use the other period and maintain 01 2010  and post to accounts.
    Here we want to extract the list of employees for whom we post the  Full and final settelement in the particular month.
    Please helpme to solve it.'
    U r help is highly approciated.
    Regards,
    Sai.

  • How to extract the number of employees (Head count) in a particulr month

    Hi Experts,
    We are trying to have a customized report  on  Having the  employee  headcount  for a particular month  with number of employees joined on the month and number of employees left the organisation.What is the way to get it.
    Please advice.
    V Sai.

    Hi Vicky Sai,     
    The standard report is S_PH9_46000223 - EEs Entered and Left
    If you want to obtain the numbers in the same screen you should do the following1
    1 - access the report
    2 - further selection button - select Action type and move it to the Selection fields (you will get it on the screen)
    3 - select action Hiring and action Leaving (so that the report will only count these elements)
    4 - Period - current month
    5 - run the report
    6 - you will now have to see the number of employees (unfortunately you cannot do Sum here as you could do in a Querry that you would build as you would add the Count field so we need to do a little trick)
    7 - Change layout icon - View tab- select Preferred view instead of SAP List viewer ->Microsoft Excel
    8 - Select a template - press save
    9 - You will see now the report in the Excel format. You can do sums if you want, add formulas, or you simply delete the first line and just look at the latest line filled in (total number of EE who left or were hired during the month)
    If you do your own Querry - you can skip the Excel part and make a screen variant with the Sums.
    At least now you have 2 options that you can choose from
    Regards,
    Adriana

  • How to stop the Job work orders to sub contractor failed to deliver goods?

    Dear friend,
    If  a job work vendor didn't deliver the goods in the stipulated time say 50 days this vendor to be stopped for further job work orders.  Each and every order follow's the abover rule.  How to configure the sap? Manual blocking not required. Automatic blocking is required.
    Regards,
    TS.
    Edited by: tadavarty srinivas on Feb 21, 2008 6:15 AM

    u nee to take help of source list but the thing is then system will not allow you to issue any type of po to this vendor
    to achive this
    stpe1 : activate source list at plant level(as u mentioned it has to be for all the vendors)
    step 2: create a source list for all the material (externaly procured material or sub contracter) 
    step 3:  mark the BLK check box in front of that vendor 
                                    or
    JUST BLOCK THAT PARTICULAR VENDOR USING TCODE XK05

  • How to exclude the Transfered Terminated employee

    Hi all ,
    I need to fix a bug in the report which displaying all the Hired , Rehired , Transfered employees data of only IT department in the 13th months window period .
    so what currently the report is doing is ....
    Report is defined with PCH logical database .
    Upon the selection screen they are inputting the Root org unit 500000 with Evaluation Path Pers-o.
    and selecting date range ALL.
    Logic is currently pulling all the persons belongs to that root org units.present and past.
    Here 2 conditions are using that 1) although if an employee is hired in IT and Transfered out of IT within 13th months Client requires that data.
    2) Although if an employee is transfered of IT and then terminated then they dont want his data.
    satisying the first condition i am written logic but to satisfy the second condition i am not getting the logic could any one please.....
    logic to pull up the employees data who are Hired within 13 months window perid and now transfered to other sales department.
    Get Objec.
    If Objec-otype = 'P'.
    HR_read_infotype.
    begda = '01011800'.
    endda = '31129999'.
    tableS
    p0001.->Now p0001 is filled by all the org units.
    delete adjacent p0001 comparing orgunits
    Read infotype 41 based on Terminations , Hiring , Rehiring.
    loop at p0001.
    Now pass this org unit to Rh_Struc_Get.
    with evaluation path o-o to get the top hirarchy into RESULTS_TAB.
    now loop at resutls_tab.
    read table pchojid with low = resutls_tab-objid.
    if sy-subrc = 0.
    Flag =1 .
    exit.
    endif.
    Endloop.
    So the above loop will check if any of the org unit belongs to the IT department previosuly...
    tehn it will flag1 , if flag when then only it will process for fianl itab,.
    Now my problem how to check if an employee is terminated in sales...what logic need to be embed herer... any one any clue?
    Regards
    sas
    i know people dont have enough time to think this alot
    Edited by: saslove sap on Apr 24, 2009 8:12 AM

    hi ,
    In table PA0001 (HR Master Record: Infotype 0001 (Org. Assignment) ) ,
    field PERSG - will decide whether Employee is active or terminated.
    Values of PERSG are based on Customization again..
    Say if PERSG is
    1     Active
    2     Retiree/pensioner
    3     Early retiree
    4     Interns
    5     Terminated
    6     Inactive employee
    Ram.

  • How we get the lower level employee under particular level employee

    Hi ,
    i have query like
    select lpad(' ', 3*level) || empno, level
    from
    scott.emp
    start with
    mgr is null
    connect by
    prior empno=mgr
    output:-
    LPAD('',3*LEVEL)||EMPNO     LEVEL
    7839     1
    7566     2
    7788     3
    7876     4
    7902     3
    7369     4
    7698     2
    7499     3
    7521     3
    7654     3
    7844     3
    7900     3
    7782     2
    7934     3
    i want to get all hierarchy under particular employee id i entered during runtime. eg. if i entered 7566     then it should display the following output.
    7566     2
    7788     3
    7876     4
    7902     3
    7369     4
    is it possible , please suggest.
    thanks
    kam

    Hello,
    How about trying like this?
    SELECT LPAD(' ', 3*LEVEL) || empno, LEVEL
    FROM scott.emp
    START WITH empno=7566 -- Or any value from where you want to start
    CONNECT BY PRIOR empno=mgr -Ammad

  • How to convert the x/y pixel into Lat/Lon?

    Does anyone know how to covert the X/Y coord into Lat?lon coord system? What is the formular?
    Thanks!!!
    Ming

    Depends on the projection your map is using.

  • How to delete the multiple companies assignement of a employee in SRM

    Hello Friends,
    In business partner maintenance (BP), one employee assigned to multiple companies in relationship tab.
    Following are the entries observed in relationship tab in BP Transaction code.
    Is employee of
    xxx(BP number) u2013 Company(address type) --- xxx(description) u2013valid from --- valid to -->1st entry
    xxx(BP number) u2013 Company(address type) --- xxx(description) u2013valid from --- valid to --> 2nd entry
    Ideally one employee should  assigned to one company only.
    Kindly let me know how to delete the relationship.
    We are using release SRM 5.0 with classic extended scenario.
    The organization structure is HR Replicated.
    Thanks in Advance,
    Pithani Suresh

    Hello Ganesh,
    Thank you for providing information.
    The employee is not assigned to multiple companies. The assignment is related to orgnizational unit.
    In organization structure (PPOSA_BBP), the user/position is assigned to one organization unit only
    More details about this issue,
    we find the relationship of the user/position in BP T.code (Relationship Tab), it is showing the relationship with current organizational unit and previous organizational unit. Ideally it should be assigned to one organizational unit. Due to some inconsistency, it is still showing the previous organizational unit.
    Example: Ex: User A is replicated from HR to SRM and assigned to Dept A (org unit 1) and later User A is shifted to Dept B (org unit 2) from HR Replication.
    Following are the entries observed in relationship tab in BP Transaction code.
    Input is BP number assigned to of the user A central person.
    User u201CAu201D is employee of
    BP number of org unit 1u2013 Company(address type) --- xxx(description) u2013valid from --- valid to -->1st entry
    BP number of org unit 2 u2013 Company(address type) --- xxx(description) u2013valid from --- valid to --> 2nd entry
    Thanks & Regards,
    Suresh Pithani

  • How to avoid the "Enter Employee Responsible" error in an Opportunity

    Hi CRM gurus,
    My employer wants me to create a custom Lead Type (and an Opportunity Type) which will look just like the SAP default Lead (and Opportunity Type respectively), except that he wants a custom Partner Function called "Sales Person" instead of the two default Partner Functions "Sales Representative" and "Employee Responsible".
    So, I made a copy of the PF "Employee Responsible" and named it as "Sales Person". I made a copy of the Partner Determination Procedure for both Lead and Opportunity Transactions. Deleted the PFs "Sales Representative" and "Employee Responsible", and added the PF "Sales Person". I made a copy of the Lead and Opportunity Transaction Types, and assigned the appropriate PF Determination Procedures. I got the Access Sequence and the Partner Determination Procedure right (checked it by clicking the button "Check Part. Determ. Proc"). I did all the miscelleneous minor changes that need to be done.
    Now, when I create a Lead, and then create an Opportunity as a follow up document, and add a Product to this and try saving the Opportunity, I get an error message saying "Enter Employee Responsible".
    It seems that the PF "Employee Responsible" is a required field in the SAP default Opportunity, but how can I avoid that in my custom Opportunity?
    Even if we try to avoid this PF now, does it have any repercussions in the follow-up documents that get generated from this transaction (like Sales Quotation, Sales Order etc) or in any other way. How important is the PF "Employee Responsible", or better, what's the significance of this PF in the Opportunity transaction?
    I'll appreciate any thoughts from you. I will instantly award max points for the correct answer
    Thanks,
    -Pras

    Kai,
    Thanks for your response. I have mailed you the screen-shots of my configurations. I did not know how to pass this info via SDN, hence I mailed it directly to your e-mail ID in your profile. I am sorry if that's not the right way to approach for help.
    >>If you maintain an additional employee responsible, does it work then?
    I have set the configuration "Only Functions Assigned to procedure" for the Permitted Functions in the Partner Determination Procedure. Hence, I do not have an additional "Employee Responsible" Partner Function in my list. This is to not permit the end-user to use other Partner Functions besides the mentioned here. The client wants to make this as simple as possible without giving too many options to the end-user (sales folks).
    However, I will temporarily set this field to "All defined Partner Functions" and, enter a BP for Employee Responsible and let ytou know what I see.
    Thanks a zillion for your help.
    Thanks and regards,
    -Prashanth

  • How to find the avg salary of first 3 employees based on each department?

    how to find the avg salary of first 3 employees based on each department?

    Hi,
    Do you mean something like this?
    with a as
    select
      deptno
      ,sal
      ,row_number() over ( partition by deptno order by sal desc) rn
    from
      emp
    select
      deptno
      ,round(avg(sal)) avg_sal_of_top_3
    from
      a
    where
      rn <= 3
    group by
      deptno
    order by
      deptno
    DEPTNO AVG_SAL_OF_TOP_3
        10             2917
        20             2992
        30             1983
    If not please give more details.
    Regards,
    Peter

  • HR-ABAP.How to Find the Employees assigned to the Appraisal Template

    Hi ,
    Please help me out.how to find the employees assigned to the Appraisal template.
    Ex. 7825232 is a appraisal template id and i want to know in the system how many employees assigned to it..
    Please let me know if the post is missing something.
    Suggestion also appreciated ...
    Thanks Inadvance!
    Law.

    check this fm HRHAP_DOCUMENT_GET_LIST_XXL
    Thanks
    Bala Duvvuri

  • Urgent:::how to get the employee hierarchy

    hi all.
    let me know how to get the employee hierarchy in HR organizational management.
    like when we give emp id it shows developer name---superior( team lead name)-superior(project lead name)---
    points will be rewarded for valuable answer.

    Hi,
    1) You can use the relation '002' in the table HRP1001, between the position of developer (objid) and get the position of team lead (sobid field). With the position of the team lead got in SOBID field... with the relation '008' get the person name.
    2) You can use the transaction PPOM_OLD to view the reporting structure...
    Regards,
    Meera

Maybe you are looking for