How to crack stagdard tcode

Dear All
Can anybody tell me how to crack standard tcode
I hv requirment that to add one field in the me21n
for that i neew to make zme21n
hepful answer wil definatly rewarded
Regards
Shashikant

Hi,
try user exit or screen exit
http://help.sap.com/saphelp_470/helpdata/en/e7/702ea50cf411d3b4af006094b9b121/frameset.htm
Regards,
V.Balaji
Reward if Usefull...

Similar Messages

How to restrict executing tcodes in transaction tab for master clients

This question applies SOLMAN project implementation tools: SOLAR01, SOLAR02 and so on.
Our ERP2005 development U50 system has two clients:
One is master client 101 where all customizing should take place but no transactions are allowed
second client 102 works as sandbox client where new customizing can be test and master data and transaction are allowed.
Only U50/101 is defined in Solution manager SMSY in system role 'development system'. Currently U50/102 is not defined in Solution manager to any system role at all.
As configuration should take place via Solution manager, the consultants use SOLAR01 and SOLAR02 in system role 'development system' meaning that they are connected to U50/101 if want to execute transactions in transaction tabs or IMG nodes in Configuration nodes.
But U50/101 is our MASTER client and no transactions nor most master data are allowed in there. We want to keep it clean. How can I avoid tcodes being executed in system role 'development'. I want to allow consultants use tcodes if they change to system role 'quality system'. But they might forget to change the system role before executing the transaction.
Is there an option in Solution manager Project implementation tools that do not allow tcode launch from transaction tabs when system role is 'development system'.
Of course I can restrict tcode execution with authorizations in satellite systems, but then I would need to disable authorizations for each tcode possibly being used. So I don't like that option.
br: Kimmo

Okay, I'll continue dialog with myself. I found solution how to assign other clients on one system to other system roles, which are so-called 'customer roles'.
See solution manager help:
http://help.sap.com/saphelp_sm40/helpdata/en/3b/8be61c54d22945837fd69861d21a08/content.htm
I did not know until know, that system roles are actually customizable. The roles with letter P,D,C,T,E, etc. are reserved for SAP but you can create your own system roles into table SMSY_ROLES. You would not do it with SM30, but from tcode SMSY and following menu Utilities-System Settings->tab:System Roles. Switch to change mode. Roles with 0-9 are available for "customer roles". Choose role type and write your own description ( like: Sandbox client in development system ).
Now the new role is available in SMSY. But You cannot see it yet in SOLAR_PROJECT_ADMIN/System Landscape tab. In there you must press button 'System role assignment' and in the opening window add your own 0-9 role defined earlier and save. Now you see your new role in 'system landscape' tab and you can assign systems to it like you had done with SAP standard roles.
Now users using implementation tools can change their current system role to your new 'customer role'.
But what it comes to my original problem (see title), that still remains. I have debugged the tcode execution from transaction tabs and don't see any possible way to avoid tcodes being executed for an unwanted system role. An Enhancement Spot ( =new BADI) can of cource be used for making custom rule for my requirement.
I'll make this thread answered. Hope you joined my self-dialog.
Keywords: DEFINE EDIT SYSTEM CUSTOMER ROLES SMSY_ROLES
br: Kimmo

How to create a tcode for abap query

how to create a transaction code for abap query,
i used a single table , my requirment is as i enter the tcode i should get the selectioin screen of my query.

Hi
Follow this
. Make a transaction with parameters transaction from se93 .
2. Put START_REPORT in the transaction
3. Check the skip intial screen checkbox
4. in the table control in the end of screen put these values
D_SREPOVARI-REPORTTYPE = AQ
D_SREPOVARI-REPORT = <USER GROUP in WHICH THE QUERY IS CREATED> G
(G stands for GLOBAL AREA:)(Entered after a space)(G should come after 9
chanracters(8 char for user group,one space and then G)
D_SREPOVARI-EXTDREPORT = <QUERY NAME>
refer this:
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/how-to-assign-a-tcode-to-a-sap-query-579623
Regards
Shiva

How To call a Tcode From a Program and returning back ?

Dear All,
I have a requirement, i have to show all the open orders as in the the tcode va05 and return back to the my program. so how to display the tcode and getting back to my program. please help?

Hi,
Basic syntax to call the transaction is:
SET PARAMETER ID <id name> FIELD <filedname>.
CALL TRANSACTION <TCOde> AND SKIP FIRST SCREEN.
If your are using ALV then snippet is :
FORM user_command USING okcode    LIKE sy-ucomm
                       lselfield TYPE slis_selfield.
CASE okcode.
    WHEN '&IC1'. " SAP standard code for double-clicking
      CASE lselfield-sel_tab_field."check if double click is only on
        WHEN 'ITAB-AUFNR'."aufnr not on any other field
          SET PARAMETER ID 'ANR' FIELD lselfield-value.
          CALL TRANSACTION 'IW32' AND SKIP FIRST SCREEN.
      ENDCASE.
ENDCASE.
Endform.
Pooja

Preventing How to Crack a Wi-Fi Network's WPA Password with Reaver

Hello,
Are Cisco AP's vulnerable?
http://lifehacker.com/5873407/how-to-crack-a-wi+fi-networks-wpa-password-with-reaver
Is their a new IOS available to handle this?

You are partly right here George. Granted, Reaver 'only' cracks WPS PINs, but once it has done so you are 'given' the WPA/WPA2 PSK. In a round about way you are ultimately getting your goal, the WPA/WPA2 PSK.
A Reaver attack tutorial/demonstration using the OG150 is now available to download for free! WPA2 PSK WAS CRACKED IN 4 SECONDS!! Download the PDF tutorial from http://www.og150.com/tutorials.php.
Attack was demonstrated on a Linksys WAG54G2 router with v1.00.10 software.
Thanks
Darren

How to see OB40 tcode screen through spro

Hi All,
how to see OB40 tcode screen through spro (need path in SPRO)
Thanks,
Amit

Hi,
You use Tcode SPRO->Img (F5)->SAP Customizing Implementation Guide->Financial Accounting->Financial Accounting Global Settings->Tax on Sales/Purchases->Posting->Define Tax Accounts
For details you can refer this link:
http://www.upload2world.com/pic110/upload2world_08290.jpg
Hope this will help you.
TQ
Regards,
Nazrul

How to crack a ipod password

I bought an ipod online and when i received it it had a passsword on it from the previous user and i was wondering how to crack the code. Any suggestions?

You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

How to query which Tcodes specified user used with one day?

Hi guys:
How to query which Tcodes specified user used with one day?

Hi
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Regards
Sumit Jain
[reward with points if the answer is useful]

Can any body tell me how to use the TCODE:ABF1 ?

Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.

Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K

How to find the TCODE that is created for the table maintanance generator

Hi ,
How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
Regards
Ramakrishna L

Hello,
I try it this way
1. Goto SE16 --> enter table TSTCP.
2. In the selection-screen displayed, enter
PARAM = *<ZTABNAME>*
You will get the t-code for the TMG.
BR,
Suhas
PS: Are you sure a t-code has been created for this TMG ?

How to find out tcode from a program that can run the same report?

Hello all,
I have a program name and I can see it is successfully proccessed. Now if I want to get the report via a tcode, how can I get it?
How can I find the tcode from the program itself?
Regards,

Hi,
1) Go into SE80, > Enter the name of the program, and press 'Enter'.
2) You will see a folder called 'Transactions' appearing in the object list on the bottom left.
3) Open the folder, and you'll find T.code of that program.
Thanks,
Nirav

How can we call Tcode from the Portal?

Senario:
2 BAPIs are developed:
1. The information say... ABC is stored into the table from the portal using the Create BAPI.
2. The change in this ABC information is done using a particular <b>Tcode</b> say xyz. This is a report that calls the change BAPI inside.
The ABC information change will be done either through the Tcode in ECC or through the EP.
3. The Tcode has been created in ECC.
Please let me know who will be responsible to call this tcode from the Portal and how?
I am very very new to EP field so please help...

Hi Jignesh,
If you have already performed these steps and are able to see the iview that you have created. Then I think your issue has been sorted out.
To explain it to you in detail.
Let us suppose, you have created a SAP Transactional iview to access the TCODE-SE38.
Now, as soon as the user clicks on the iview, it will authenticate by asking for the username and password for the backend system...if your SSO is not in place.
Now, if your asking me how to make the iview visible.
You can add assign this SAP transactional iview to a page,a workset or a role and add the corresponding page, workset or role to the user in USER ADMINISTARTION by making it an entry point.
Or to make the iview as an entry point, right click on the iview that you have created and open the properties, then for the option that says entry point choose yes.
I guess that answers your question.
Let me know if you have need any further clarifications on the same.
Regards,
Sandeep

How to find out Tcode Used and their hit rate over a given period of time.

Hi All,
We wanted to know what are the tcodes that are used and how many times over a period of time..
Can you please suggest the ways to find this out..
I have heard of ST03N but not sure how to use this and then download the information ..
Regards,
Vidya..

Hi,
Check this
[How to get list of frequently used TCodes]

How to find out tcode for the zprogram.

Hi All,
How to find out the Tcode of a Zprogram.
I will appritiate your help.
Thanks,
Veni.

Couple of ways to do this, one is to go to SE93 and do F4 on the transaction code field, click information system, click the all selections icon, then put the name of the z program in the field, and hit enter, this will give you the tcode.
Regards,
RIch Heilman
Message was edited by:
Rich Heilman

How to get (OAAD tcode) employee photo into sapscript / smartforms??

Hi!
I need to insert the employee photo jpeg (from oaad) into an sapscript or smartforms.
It's possible to do dynamically? (without file conversion)
Thanks

Hi,
I m providing u with this link, u may get some idea .
How to display the employee photo in a smartform
or
These are all the steps to upload the Photo.
1. Create a number range for SAP Archive Link :
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain number ranges.
Tcode: OANR
Create range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
IMG>Basis Components>Basis Services>SAP Archive Link>System Settings>Maintain document types.
Table: TOAVE
Tcode: OAC2
3. Document type HRICOLFOTO must be linked to object type PREL and IT0002.
IMG>Personnel Management>Personnel Administration>Tools>Optical Archiving>Set up Optical Archiving in HR.
View: V_T585O,
In all three columns there are minuses, don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type PREL.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain Links.
Table: TOAOM_C,
Tcode: OAC3
5. Create this content repository with storage type FILE archive.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain content repositories.
Tcode: OAC0
Storage type FILE archive can be attained by clicking on the field Storage type and clicking somewhere else in the screen with the right mouse button. Choose Possible entries and only then you get a list of all values. FILE Archive is entry number 08. Choose Version no. 0031 and Archive path something (e.g. C .
6. Link photo to personnel number.
Menu>Tools>Business Documents>Miscellaneous>Stored Documents.
Tcode: OAAD
Thanks,
Mamta Kumari

How to crack stagdard tcode

Similar Messages

Maybe you are looking for