How to creat a cost center

While creating a cost center it is throwing a error that Controlling area XXXX does not have a standard hierarchy (please assign one)..
Pls Guide what i need to do..
Its urgent..
Thnx & regards
Subhajeet

If you assigned the Std Hierarchy to the Controlling Area while the CCtr Create screen was still open, get out of that screen and try to create the CCtr again.
Else, go to OKEON and maintain a hierarchy for the Controlling Area. Create a group or two below the Std Hierarchy and then try to create the CCtr.
Cheers.

Similar Messages

  • HOW TO CREATE A COST CENTER

    HI ! ALL
    I WANT TO KNOW ABOUT HOW TO CREATE A COST CENTER IN SAP .
    EXAMPLE - ADMINISTRATION DEPT , MARKETING DEPT , PACKING DEPT.
    REPLAY ME - 09558175176

    hi
    http://wiki.sdn.sap.com/wiki/display/ERPFI/HowtocreateaCost+Centre
    see this link you can clearly understand...given with screenshots

  • How to distribute from cost center to profit centers?

    Dear Experts,
    We have created profit centers as per business.  We have certain expenses that are common.  e.g. IT, A/c, HR etc.  We have created cost centers for the same.  Now we want to assign it to various PCs.  How to distribute from cost center to profit centers?
    With Regards,
    Ajeesh S
    Moderator: Please, avoid asking basic questions

    Assign profit center in cost center master data at KS02.  It will directly post to profit center
    Srinivas

  • How to delete a cost center hierarchy

    Hi all,
            We are having a issue regarding the cost centers. The cost centers have been assigned wrong cost center numbers. Now the client wants a set of new cost center numbers to be used in the system. In order for that to be done I thought may be if I can change the cost center hierarchy that has been assigned to the controlling area in OKKP transaction we can assign new cost centers to the new hierarchy and solve the problem.
              But the system does not allow us to assign a different cost center hierarchy from the already existing one when cost centers are assigned to it.
    My issue is how to delete the cost center hierarchy.
    If that is not possible how can we remove the cost centers assigned to the cost center hierarchy ( is this possible)
    Last question can we delete the transaction data posted to cost centers.
    Points will be assigned to all the replies.
    Thanks,
    Sarada

    Hello Sarada,
    If the requirement is to track new cost centers only going forward, then you may need to create new Cost Centers, block old cost centers. Create a new node in the hierarchy saying "Old-do not use".
    If the requirement is to have the history transactions reflect the new cost centers as well, then you will need to undertake a project for SLO (System Landscape Optimization) which will replace this data at table level. This is a major project in itself and the programs are proprietary to SAP.
    Hope this helps.

  • How can define the cost center (department) manager?

    We are on 11.5.0.10
    Financials implementation is done(GL,AP,AR,FA,IA)
    In iAssets System, we want to set up the approval method to use "cost center-based approvals". (For cost center-based approvals to work properly, each cost center must have a manager defined.)
    How can define the cost center (department) manager? Thanks.

    I believe this is done in the organization definition screen. For each organization, we attach a classification "Company Cost Centre" (the same place where we attach the classification operating unit, inv org etc). In the others section, there are 2 additional information - GL company cost centre and reporting information. In the GL company cost, you need to attach the balancing segment value and the cost centre value. In the reporting information, you need to attach the manager for that organization. This ay the relationship between the cost centre and manager is created.
    Hope this clarifies.
    Vinit

  • How to create New Work Center

    Dear Experts
                      How to create New Work Center?, what are all the inforamtions  need while creating workcenter.
    Regards
    Rajakarthik

    Hi,
    In addition to the above post, you need to identify that:
    1. Whether you need separate activity types and cost center for the newly created work center. These details are entered in the Costing View of the Work Center.
    If these are required then use KL01 to create new activity, KP26 to define the activity price.
    If required create cost element using T Code KA01 and Cost Center using KS01.
    Take help from the CO guy on this.
    2. Also  you need to ask the concerned about the operating times for the wor center. That is Start time and End time of WC. It is used for capacity evaluation and scheduling of the orders. It is maintained in the capacity view (Bottom left Button in the view).
    this view will also contain the details regarding the calendar, to be assigned to the work center, if needed. Collect details for this requirement. Also you can assign a different calendar to WC apart from factory calendar.
    3. Find out whether this WC will be operating in shifts or not. Accordingly maintain the details.
    Hope it is useful for you.
    Revert for clarifications
    Regards,
    Rohit.

  • How to find the cost center group from cycle/ segment in CO module?

    Hi All,
    I need to fetch the list of cost centers in the cost center group against the cycle.
    Is there any table which will store the list of cost centers against the cycle?
    or else, what I was thinking is use of BAPI BAPI_COSTCENTERGROUP_GETDETAIL, which will give me the list of cost centers,
    but we need to pass the controlling area + cost center grp to fetch the cost centers from BAPI, I have controlling area with me but not the cost center grp name, only I have Cycle info lke cycle name, segment name, seq number. so how to find the cost center grp name from the cycle name?
    Regards,
    Mrunal

    FM: RK_AL_CYCLE_READ
    CHECK TABLE: T811K

  • How to delete the Cost center line item data

    How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
    Is there any way to delete the line items in that cost center.
    Can data archiving & deleting can help us..........
    does it have any effect over other cost center data....
    any input needed.........
    regards
    rajesh

    Hi,
    i found 2 reports for you:
    1) CO_TOTAL_WRI - Archiving CO Totals Records   
    2) RKCOITW1     - Archiving CO Line Items: Write Program        
    from 2) is a linlk to customize archiv-parameters
    -> start it with transaction se38 / sa38
    A.

  • How to determine the cost center

    Dear experts:
    Could you give me some suggestions about how to determine the cost center depending on the different
    storage location when we use the t-cdoe MI07
    Thanks in advance.
    Rong

    Hello experts!!!
    how have you resolved this issue???
    I have the same situation, and i dont know how to manage this.
    Thank you very much in advance.
    Best regards,
    M. Cecilia Vacatello.

  • How to Make the Cost Center filed Mandatory ?

    While entring the Doc in FI  for Expense A/c, How to Make the Cost Center filed Mandatory?

    Hi,
    Got to field status groups and select cost center field as required field.
    Refer to this documentation
    http://www.sap-basis-abap.com/sapfi012.htm
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • How to block the cost center

    Dear Guru's
    Can any tell me how to block the cost center, can we detele which is having values. can we delete which is not having values
    Regards
    Chandra Sekhar Reddy.P

    Hi,
    Once you post actual values or any planning exists on this cost center you cant delete.
    To ristrict posting to cost you have two options.
    1.You can change validity period.
      change  end from 12/31/9999 to what ever date you want to stop posting(e.g. as of today 10/23/08)
    2. lock all postings to cost center on Control data tab in KS02.
    Thanks,
    Rau

  • How to create a funds center hierarchy

    Could somebody tell me how to create a funds center hierarquy ?
    My idea is to create a hierarchy vaious funs center , not only to create and assign.
    Thanks in advance
    Olga

    Hi Olga,
    Please, use FMSD transaction for this. If you want to create several groups, use FM_SETS_FICTR1 transaction.
    Regards,
    Eli

  • How to create new cost element catagory

    Hi,
    Can any one let me know How to create New cost element catagory other than standard cost element catagory.
    Thanks & Regds,
    Sany.....

    Hi,
    We are using one GL to post expences as well as revenue for the same. In copa primery cost elements are not allowed & if i set clem cat to revenue it wont allow me to book purchase in same GL.
    Waiting for your reply.
    Regards,
    Sany.

  • FM to create a cost center

    Hello All,
    I need an FM to create a cost center in back ground referring another cost center
    I checked the FM K_COSTCTR_BAPI_CREATEMULTIPLE, does not have an option to create referring another cost center.
    Any help would be greatly appreciated.
    Thank you
    Best Regards
    Amar

    Check BUS object BUS0012 for CostCenter.
    - CostCenter.GetDetail1 to get information from original cost center (BAPI_COSTCENTER_GETDETAIL1)
    - CostCenter.CreateMultiple to create the new one (BAPI_COSTCENTER_CREATEMULTIPLE)
    Regards,
    Raymond

  • How to add new cost center to cycle segments

    Hello SAP Gurus,,
    How to add new cost center to cycle segments?
    needed badly and ASAP

    Hi
    Go to KSu2 and give the cycle name ad select the segment that you need to add cost center.
    If you are deal with cost cneter groups add new cost center to your cost center group KSH2.
    Kesh

Maybe you are looking for

  • 2 different Centro users-How do you sync calendar info between the 2 phones? How do you sync 2 centro phones to one computer?

    My husband and I have 2 centro (AT&T) phones.  We would like to share our calendar information with each other.  He has the Palm Desktop program downloaded on his work computer.  He is using the Outlook calendar at work.  We would also like to downlo

  • Xi-FI Stuttering audio issue.

    I upgraded my computer sometime back to the following spec. Intel Quad core CPU - Q9450 4gb of ram Gigabyte P35-DS3P (Intel) motherboard Running Vista 32bit Ultimate I decided to use my existing Audigy Fatality card in it When I first set it up, I no

  • Video Playback problems in multiple platforms

    I have a Mac (10.7) and i am using adobe captivate 7. i published a project with .htm and .swf and .flv files. The .htm and .swf files play perfectly on my mac. Zero problems. However when I tried to access the .swf file on a pc, it didn't exactly wo

  • Mac to iPad Import Photos takes up memory of Mac

    Every time I try to import photos from my Macbook through selecting the import folder in iTunes, it automatically takes up the memory of my Macbook. I am confuse on why importing photos from a folder through iTunes to an iPad takes up the memory of t

  • Will "extended" stage3d profile ship with 11.8 player

    I'm very keen to get some features of extended profile (4k textures, shader 3 model) used in our commercial game, and would like to find out when will it ship in release player. Will 11.8 keep it after it comes out of beta in few months? Any idea on