How to creat the sub type in attendance infotype (2002)

Dear Guru's,
I have to creat a subtype in attendance infotype(2002) .
kindly provide the way to do.
Thanks & Regards
Rajkumar A.

Subtypes of attendances are nothing but types of attemdances. You can vreate these in table V_554S_B.
Regards,
Parul.

Similar Messages

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

How to create the Data Type for the receiver end?

Hello Expertise
I wanted to Create a Data type for Receiver end in PI.
Sender end is ECC.
Receiver end is SRM
Here's the Data type for Sender end as
Can anyone help to create the Data type for Receiver end i.e SRM.
Thanks in advance.
Regards
karan

Hi Karan,
Please don't call Sir, we are just trying to help each other.
Please go through below scenario's and check your configuration.
ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
regards,
Harish

How to change the document type while creating a PO by ME59N

Hi,
I have 2 groups of PR's, for group one the document type is picked as NB and PO is created and for the group 2 it should pick as XYZ and PO should be created using ME59N tcode.
How to change the document type for group 2 in ME59N? Which user exists to use to change the document type while creating PO in ME59N?
Can any one suggest me.

Hi,
There a config area, where you can define default PO doc types for a particular Pr doc type. If you maintain the settings properly there, then your requirement can be fulfilled.
SPRO->IMG->MM->Purchasing->Purchase requisation->Define doc types.
This will serve your purpose.
Thanks,
Srinu

ADF 11g How to create the custom FilterableQueryDescriptor for adf table

Can you please let me know on the following.
1. I am dispalying the adf table using a List from the managed bean
2. I wanted to filter the table using the filter model.
3. i wanted to create the sub class of FilterableQueryDescriptor which i can specify. Not finding enough information on how to create and add the information in the setFilterCriteria
Can you please provide some insight into this topci

Hello there
I have the same issue: chaging the background color of some column headers.
My application is using a custom skinning and when i had headerClass property with a custom class defined in a separate css file, the page generated specified first the class from the skinning and then my new class definition. But my skinning is specifying a background color so the color is not overriden. Any idea?
ADF code:
<link type="text/css" rel="stylesheet" href="../../css/pivot.css" id="myStyles"/>
<af:column headerText="#{level1.userObject.name}"
headerClass="inputHeader"
sortable="false" align="center" width="100"
id="col_level1" >
Generate HTML code:
<th align="center" class="xuh inputHeader" afrroot="true" rowspan="2" afrleaf="true" dindex="6" id="pt1:tableId:col_level1" style="">
<div class="x13t">AEKLF</div>
</th>
My CSS file:
.inputHeader{
background-color: Red;
background-image: none;
color: Black;
font-weight: bold;
Thanks for your help !

How to create multiple Tree Type Region In Tabular Form ?

Dear Friends,
i have to design tabular form to Distribute User Rioght to emp to access application
eg if i have Three module in application
1.Administration
2.Attendance
3.Accounts
Module
1 Administration have 5 Pages A,B,C,D,E.
Module
2 Attendance HAVE 4 Pages F,G,H,I
Module
3 Accounts HAVE 7 Pages J,K,L,M,N,O,P
I need these three module divided into three section in tabular form as a tree Type like
Module 1 Tree Open in Tabular Form like
- (Tree Mark Open )
=======================================================
PAGE_ID-------------SUBPAGE_ID-------VIEW-------------------MODIFY-------------------CREATE----------------------------TABLE COLUMN NAME
========================================================
Administration-----------A------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------B------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------C------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------D------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Administration-----------E------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 2 Tree Open in Tabular Form like
Attendance-----------F------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------G------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------H------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Attendance-----------I------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
- (Tree Mark Open )
Module 3 Tree Open in Tabular Form like
Accounts-------------J------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------K------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------L------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------M------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------N------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------O------------------CHECK bOX------------CHECK BOX-------------CHECK BOX
Accounts-------------P------------------CHECK bOX------------CHECK BOX-------------CHECK BOXi need divided these three Module in Tabular form in three region as tree.
Table APPLICATION_PAGE_DETAILS
ID                   NUMBER
PAGE_ID             NUMBER
SUB_PAGE_ID          NUMBER
========================
TABLE USER_RIGHT
======================
ID                  NUMBER
EMP_ID            NUMBER
PAGE_ID            NUMBER
SUB_PAGE_ID        NUMBER
VIEW                    VARCHAR2(1)
MODIFY                VARCHAR2(1)
CREATE                VARCHAR2(1)How to create multiple Tree Type Region In Tabular Form ?
How can i do this ?
Thanks
Edited by: Vedant on Oct 4, 2011 3:21 AM
Edited by: Vedant on Oct 4, 2011 9:09 PM
Edited by: Vedant on Oct 13, 2011 8:57 PM

Well think of it I believe the scenario is too bird viewed hence the solution can't be exact.
But thinking of a possible solution every time a child operation fails have a catch block where you you go back to system if the parent needs to be deleted if yes, call Delete Method on the parent.
Note: Make sure that the decision on whether or not the parent record needs to be deleted will depends on the question "Does Parent Record already has several other children associated to it or not"
Hope this clarifies.
Regards,
Messer

How to define a Sub Type in IT0717

Hi Experts,
Currently working on Benefit point account.
could some one tell me how to define a Sub Type for IT717.
how do i configure.
Appreciate your response.
Regards
Raj

Hi,
I have created the subtype in the table you specified.
But unable to see the created subtypes for IT552 in PA30.
Appreciate your further inputs.
Regards
Rajesh.N.S

How to create a sub head(code) in a catalog- for service notification

Hi everyone,
How to create a sub head(code) in a catalog- for service notification?
Please guide with your valuable comments.
Please guide its very urgent.
Thanks and Regards
Edited by: MPVash Vash on Oct 24, 2008 8:14 AM
Edited by: MPVash Vash on Oct 30, 2008 7:38 AM

Hi,
Go to T-code QS41, give the catalog and code group and enter.
U can click on the code after selecting the code group and create new codes.
In SPRO u should see which type of catalog is assigned to the notification type. This u can see in the overview of the notification type by selecting the notification type in SPRO.
Regards
Haricharan

How to create the web template

Hi BW Experts,
how to create the web template.....!
I just want to know what is the use of Web template. i want to display the report
in WEB-UI screen ( sap-crm 7.0 portal ) can any one help me please how to proceed ...!
Thanks
shahina..!

Hiu2026
Steps to follow to create WAD in WEB Template in 3.5 or 7.0 u2026u2026..
Go to All programs and select your web application designer
Select the button to create a new page in WAD
Select the chart and place in the layout
Next goto Data provider Target and select your query
Give your report name in the given data provider screen
Select your query in History/find/Favourites/Infoareas button
Select your query in this screen and click OPEN
Now we can see the data provider is assigned to the chart.
To edit the chart you have to right click on the chart
After right click on it we will find another screen where we can edit all the settings
In this screen we can find NEXT click button to change our settings
In this screen we can state the tasks (Title, units, values, range)
In this screen we can change our background /validity/color
In this screen we can add values to the chart
In this screen we can add validity/positions/order/axis types to the chart
In this screen we can change the global settings/and overview of the chart.
This screen shows that we have customized the chart successfully
After successful creation of the chart we have to save the chart
Save your chart in your favorites by giving the description and technical name in the given block.
Now execute your WAD by selecting the execute button
The BEx Web Application Designer is a desktop application for creating Web applications with BW-specific contents. Using the BEx Web Application Designer, you can create an HTML page that contains contents such as various tables, charts or maps. This HTML page (Web application) provides the basis for not only Web applications with complex interaction, but also for Web cockpits and iViews.
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
Web Application Designer for Beginners
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
Web Application Solutions: A Designer's Guide
http://www.lukew.com/resources/webapplicationsolutions.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/bw-web-application-designer-1955944
Feautures of WAD in 7.0
http://help.sap.com/saphelp_nw70/helpdata/en/88/4d354277dcb26be10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6

How to create the dynamic report

Hi,
please help me, how to create the dynamic report

Hi,
Try this..
DATA: p_temp(30) TYPE c DEFAULT 'ZTEST_REPORT'.
TYPES: BEGIN OF t_abapcode occurs 0,
        row(72) TYPE c,
       END OF t_abapcod.
T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'WRITE: / ''TEST REPORT''. '.
APPEND T_ABAPCODE.
INSERT REPORT p_temp FROM it_abapcode.
      SUBMIT (p_temp) AND RETURN.
      DELETE REPORT p_temp.
Thanks,
naren

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create the Access sequence for the Vendor+material+plant combination

Hi all
Please let me know How to create the Access sequence for the Vendormaterialplant combination..
Whats the use? What its effect in purhcase and taxe..
brief me please

Hi,
you are asked to maintain the access sequence for the tax condition for which you are putting 7.5%.
goto OBQ1 or img..financial accounting new...global settings.... taxes on sales and purchases ......basic settings.....
find the tax condition type. see in it which access sequence is attached.
if there is none then use JTAX used for taxes in India.
or you can create the similar one for your.
to create the same goto OBQ2.
new entry or copy JTAX.
and assign the access sequence to condition type.
this will resolve your problem if you just need to assign the access sequence.
regards,
Adwait Bachuwar

How to create the folder in presentation server through pop-up(

Hi Experts,
Can u give me the solution , how to create the folder in presentation server through pop-up(means dynamically, after executing the program , pop-up has to come to create the folderand path)
regards
ram.

Use the methods -> DIRECTORY_BROWSE & DIRECTORY_CREATE of the class CL_GUI_FRONTEND_SERVICES
DATA: path TYPE string,
      rc TYPE i,
dir_name TYPE string value 'HI'.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_BROWSE
    CHANGING
      SELECTED_FOLDER      = path
IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate path '\' dir_name into path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_CREATE
    EXPORTING
      DIRECTORY                = path
    CHANGING
      RC                       = rc
IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: Kartik Tarla on Sep 23, 2009 5:54 PM

How to create a line type in data dictionary

How to create a line type in data dictionary?Please explain step by step?
Thanks & Regads,
Sairam

Hi,
the details abbout the line type.
The line type of a table type can be defined by:
o Specification of a type that already exists (data element,
structure, table type, table, view) whose properties are then copie
as properties of the defined table line.
o Direct type input, where data type, number of positions, and, if
required, decimal places, are entered directly.
o Specification of a reference type.
and SE11 and click on datatype and click on table type and enter the line type.
Thanks
Shiva

How to change the billing type Rv to DG

Dear all,
when ever we are doing the return order to a sales we will create a customer credit memo through the VF01 T-code.where billing type will be customize one that is credit memo..
once we save that the in customer G/L we are getting the document type as RV instead of DG.
please tell me how to change the document Type in customer Ledger.
regards,
chethan

Hi,
Just to draw your attention that DG is doc.type used to issue credit memo from FI (t.code FB75), where it does not involve the inventory movement.
Whereas the credit memo generated from OTC cycle (i.e.VF01) involves inventory movement. Ideally, both of these types of credit memos should have different doc. types, so that users can distinguish the returns based on doc. types later on.
So, after explaining the above, please check with your business thoroughly if they really need to use DG instead of RV. I would suggest to create new doc. type 'ZC' and set up through VOFA.
Thanks,
Nirav

How to creat the sub type in attendance infotype (2002)

Similar Messages

Maybe you are looking for