How to creat virtual wifi mini adaptor.

In commond prompt when write & enter the "netsh wan..." commond prompt does nothing for the same.

If what you want to achieve is to create a shared internet connection, then you can simply use the GUI provided in Windows 7.
Please refer to this link
Set up a shared Internet connection using ICS (Internet Connection Sharing)
http://windows.microsoft.com/en-in/windows/using-internet-connection-sharing#1TC=windows-7
If you want to use the command prompt
Please make sure to follow instructions in this link
How to Configure WiFi Hotspot in Windows 7 Using Command Prompt
http://www.durofy.com/how-to-configure-wifi-hotspot-in-windows-7-using-command-prompt/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

Similar Messages

Microsoft Virtual Wifi Miniport Adaptor Driver Issue

Hi,
Got a brand new Windows 7 PC. Experienced one BSOD when searching network for other devices, and another flat out freeze when Windows Update asked me to restart. My PC under devices and printers showed that it needed troubleshooting. Windows identified the Microsoft Virtual Wifi Miniport Adaptor as the problem, suggesting a reinstall of the driver- to which it attempted, and failed. I have thus simply uninstalled this device from device manager. I expect Windows will find it again on reboot.
What is this adaptor, and do I need to worry about it? I'm connecting through Wifi with no problems, but I do plan to connect through a wire soon, once I can get hold of one long enough..
This is 64bit Windows 7, Core 2 Quad, 6gb RAM. I have added no new hardware.
Thanks
Ashley

I'm having an adapter issue too.
My 11 year old Dell laptop running WinXP easily connected to any wireless network even if it was 3 blocks away or further. And that is with a cheap Airlink101 usb wireless adapter I found online for 12.00 USD.
Now I purchased a Dell Inspiron 15R, running Windows 7 64bit, 4 gigs of ram, 500gb hard drive, with an intel wirless adapter and I am lucky if I connect to anything.
Now I will not throw my credentials out there and say "I am smart and you are stupid so this should just work" but I will say this: I started tinkering with computers back when the only choice for a home pc was a Radio Shack TRS-80, Atari 400 or 800,
or the Commodore 64, and some others. (I owned the Atari 800xl)
While I was not fortunate enough to attend a 4 year college, I did learn the ropes and ultimately attended a computer 'school' to get my professional diploma so I could get a job in some field. I started on the help desk and worked through different
departments, ultimately ending up in Information Security.
I will not pretend to be an expert but I do consider myself a skilled power user, or more specifically, a professional - paid - highly experienced - computer Ninja - of all computer areas.
So I will leave everyone with this, the WiFi functionality should simply work. Yes, there are hundreds of adapters and hundreds of millions of lines of code from thousands of manufacturers that work against this but this is not curing a disease.
I will not buy an Apple computer but this is why many folks jump the Windows ship, because they tire of banging their heads against the wall after paying 500, 600, 700, 800+ dollars for something that should at the very least get them on the internet.
This leads me to another question, how much should we consumers with our "grimy hands" spend to get something that works? Which laptop or home pc comes with a different/better wireless adapter then what we have? My understanding was that most peripherals
while manufactured by dozens of companies, still rely on a handful of common chips/chipsets.
I don't care how cheap the technology is, or how expensive. I have used cheap components and I have used expensive components. When running Windows 3.x, Windows 98, Windows XP, and Windows 7, and even Ubunto, or Sabayon linux distros, you always
find issues. Hence one reason why Apple likes to control their software by only installing on their hardware.
I don't see anyone on here blaming Microsoft. I am a proponent of Microsoft. Maybe even a die-hard, being a Zune HD owner and a Windows Mobile phone owner (crazy, right?). But people are here looking for a solution not a lecture.
So if somebody - be it Microsoft, Intel, or the driver signing authority, Dell, or whomever, can help then please do so. Please figure out why the 1 commonality here - Microsoft Virtual Miniport Adapter, seems to be related to this issue in some way.
We know it may not be your fault Miniport, but you sure aren't a poplular fella here!
Removing tongue from cheek...Done.

How   to create virtual cube cube in bi-7

how   to create virtual cube cube in bi-7

Hi,
VirtualProviders
InfoProvider with transaction data that is not stored in the object itself, but which is read directly for analysis and reporting purposes. The relevant data can be from the BI system or from other SAP or non-SAP systems.
VirtualProviders only allow read access to data.
Various VirtualProviders are available. You use these in different scenarios.
For more information, see:
●      VirtualProvider Based on the Data Transfer Process
http://help.sap.com/saphelp_nw04s/helpdata/en/da/5909392a430303e10000000a114084/content.htm
●      VirtualProvider with BAPI
http://help.sap.com/saphelp_nw04s/helpdata/en/26/39dc37bff7a66de10000009b38f889/content.htm
●      VirtualProvider with Function Modules
http://help.sap.com/saphelp_nw04s/helpdata/en/62/d2e26b696b11d5b2f50050da4c74dc/content.htm
●      Using InfoObjects as VirtualProviderss
http://help.sap.com/saphelp_nw04s/helpdata/en/45/13baccabbe5d78e10000000a11466f/content.htm
Note that the system does not run existing exits or customer and application extensions (customer exit, BTE, BAdI) for direct access to the source system.
http://help.sap.com/saphelp_nw04s/helpdata/en/23/c0234239f75733e10000000a155106/frameset.htm
Thanks,
JituK

How to create a wifi network with macbook.

How to create a wifi network with macbook? I dont have wifi for my itouch. I am trying to create a wifi through my macbook for my itouch. does anyone know how that works? thanks

Open the Sharing pane of System Preferences and enable Internet Sharing over AirPort.
(59391)

Virtual Wifi Miniport adaptor - Hostednetwork will not start

Hi, I'm trying to use a W520 with Thinkpad 1x1 11bgn Wireless LAN PCI Express half mini card to create a hotspot on the laptop itself. I'm trying to use a program called Connectify that handles the setup as a full Access Point. This will allow the other wifi devices to connect directly to the laptop wirelessly without a router.
The problem is that I can't activate the Thinkpad hostednetwork feature that is required for the inital setup. This is done through the Command Prompt text window. When I try to start the hosted network the error says the "group or resource is not in the correct state". I've got the latest wifi driver and a check of the driver says it supports hosted networks.
See http://www.wi-fiplanet.com/tutorials/article.php/3849841/How-to-Create-Wireless-Hosted-Networks-in-W... as an example.
Anyone else had success or otherwise?
W500 4063 34M T9600 2.8GHz, Bios 2.4, Win 7 64 Pro, 4GB RAM, ATI Radeon 3650 1920x1200, 500GB 7200rpm HDD
W520 4270CTO i7 2720QM, Bios 1.3, Win7 64 Pro, 8GB RAM, NV 2000M 2GB 1920x1080, 500GB 7200rpm HDD, Power Manager 3.62

Hi, I'm trying to use a W520 with Thinkpad 1x1 11bgn Wireless LAN PCI Express half mini card to create a hotspot on the laptop itself. I'm trying to use a program called Connectify that handles the setup as a full Access Point. This will allow the other wifi devices to connect directly to the laptop wirelessly without a router.
The problem is that I can't activate the Thinkpad hostednetwork feature that is required for the inital setup. This is done through the Command Prompt text window. When I try to start the hosted network the error says the "group or resource is not in the correct state". I've got the latest wifi driver and a check of the driver says it supports hosted networks.
See http://www.wi-fiplanet.com/tutorials/article.php/3849841/How-to-Create-Wireless-Hosted-Networks-in-W... as an example.
Anyone else had success or otherwise?
W500 4063 34M T9600 2.8GHz, Bios 2.4, Win 7 64 Pro, 4GB RAM, ATI Radeon 3650 1920x1200, 500GB 7200rpm HDD
W520 4270CTO i7 2720QM, Bios 1.3, Win7 64 Pro, 8GB RAM, NV 2000M 2GB 1920x1080, 500GB 7200rpm HDD, Power Manager 3.62

How to Create Virtual Tape Library for RHEL 5.4

Hi,
We are planning to use a tape library (well, as our team proposed) so we are trying to create a Virtual Tape Library as a proof of concept on this project. Can you help us create virtual tape libraries using raw devices.
We will be using Virtual Box as our virtualization environment which will run RHEL 5.4. Will this be possible?
Thanks and hope you can give us some ideas.

I tried the exact same setup and it is possible. What you will need is mhvtl and Oracle OSB to get a Oracle Media Management Library (MML).
Please see Integration of RMAN with virtual tape library
The link above should provide the setup info you will need. There were some initial problems, but according to follow up posts later versions of the products seem to have fixed the issues with tape handling.

How to create virtual directories on WLS 5.1

Hello, I'm new using BEA WLS, and I've already read all articles on this forum
about how to get virtual directories, but I cannot achieve this, please, would
anyone be so kind to tell me how may I do this?, or to be so kind to tell me where
may I get related and useful information to accomplish this task, please?
I sincerely appreciate your attention and time on this matter, thanks,
Miguel Angel Avila Vqz

I sincerely appreciate your help Mr. Scott, I'll review all the documentation you
refers,
Thank you so much again!
I hope I can help you someday too,
Best regards,
"Wayne W. Scott" <[email protected]> wrote:
>
>
Miguel Angel Avila Vazquez wrote:
Hello, I'm new using BEA WLS, and I've already read all articles onthis forum
about how to get virtual directories, but I cannot achieve this, please,would
anyone be so kind to tell me how may I do this?, or to be so kind totell me where
may I get related and useful information to accomplish this task, please?
I sincerely appreciate your attention and time on this matter, thanks,
Miguel Angel Avila VqzHi Miguel:
I was working on a case this afternoon related to the "FileServlet."
Several articles I
found which discuss this. I have them open on my desktop at the office,
but I am home
now. Try going to the AskBEA part of support -- http://support.bea.com/application
and make sure the "Products" says BEA WebLogic Server. In the search
box, I entered
"fileservlet virtual directory configure" and after hitting Enter, got
plenty of
articles to read.
You can also search the documentation for 'fileservlet'
http://www.weblogic.com/docs51/resources.html
http://search.bea.com/weblogic/go50/
http://www.weblogic.com/docs51/classdocs/API_servlet.html
Do you have any service packs installed? You will probably need them.
Thank you,
Wayne Scott
BEA Support
Liberty Corner, NJ

How to create virtual system

Hi all,
i am fresher i wish to check with client export and i am having access to only one sap system.
how can i create the virtual system for the purpose of testing of client export?
thanks,
Dinesh.

Hi Dinesh,
Go to domain controller. Then go to STMS transaction.Then from menu bar choose Overview-->Systems.
In the next screen in menu bar choose SAP systemCreate-Virtual system.
Give the virtual sytem name and description. Save the changes. Keep the communication system same.
Then adjust the transport routes in STMS accordingly.
Regards.
Ruchit.

How to create open wifi under domain.

If you want the users to have access to the corporate network/domain they need to be on the same network or have routes between the network allowing access.
If you want the domain to authenticate the users for WiFi access, you need to enable 802.11x authentication between the access points and assuming Windows, Network Policy Server.

Hello all,
I want to create an open WiFi in my office,for mobile. But as the whole network is under domain. So if i connect to the network by WiFi, it getting connected, but as the mobile is not an domain user,it not getting the internet from office WiFi. how to solve the problem & connect my mobile to office wifi
This topic first appeared in the Spiceworks Community

How to create Virtual InfoProvider with Services - Virtual Characteristic

Hi all,
I need to create a virtual infoprovider that also fills a virtual characteristic in order to display custom characteristics and calculated values based on user selection.
Basicaly what I want to do is send a variable in a virtual characteristic equal to the values I want to fill in the characteristic. So for instance if my base cube contains the infoobjects Brand, Product Line, Region and Country I want a have a new infoobject that has no data, but fills itself with the vales of the infoobject I specify at query time on the virtual cube.
The reason for this is I am trying to create a WAD using the delta chart (waterfall graph) that will show the difference between the plan and actual totals for a specific characteristic in Profitibility analysis.
I have a document that explains the situation. Send me your mail address and I will send you the document.
Kind Regards

We found a way to build the structure for this.
Regards

How to create adhoc Wifi Hotspot with iPhone to connect Apple TV for Mirroring and Airplay?

I don't want to use my iPhone to share or tether my iPad or laptop etc. with my cellular data plan.
What I want is to create a hotspot with my iPhone (or iPad) so that I may connect my Apple TV to the adhoc network so I am able to stream video and music from my iPhone to the Apple TV.
I do presentations in front of live audiences and want the ability to mirror my iPad or use Airplay to stream video and photos to the Apple TV without connecting to a public WiFi network.
The apple TV is so small, I just tuck it into my bag with an HDMI cable and I am able to tap into LCD projectors and flat screens and use keynote or video from my iPad so my audiences can see my presentations.
Seems pretty simple. But I cannot activate a hot spot on my iPhone without signing up for AT&T's service. Fact is, I have no need to tether my iPhone or iPad, I just want to create an adhoc Wifi network solely for the use of my Apple TV.
I posted this question to the iPhone discussions as well, but thought someone here has wanted to do the same thing.
Someone suggested just bringing any WiFi router and connecting devices to that. But that's not a solution. It's about mobility and simplicity and not creating a larger footprint.
Thoughts?

I am a presenter and I do what you want to do. I use an apple tv as the presentation device that connects to the projector. The thing that makes it all work together is the Apple Airport Express $99 and looks just like the APple TV but white: http://store.apple.com/us/product/MC414LL/A?fnode=MTY1NDA0Mg
Basically you define a wireless network ahead of time (using your iPad or iPhone and the Airport Config App) and let your iDevices connect to it and know the details ahead of time (so they will auto connect later).
You have a couple of options of connecting the airport express to the apple tv. I basically stacked them and used an ethernet cable but you can define the wireless connection also. I then strapped them to the projector (which I travel with) and used an HDMI cable from the apple TV to the projector.
Sometimes I present from my iPad...sometimes I present from my iPhone. Sometimes I present from my iPad but use the remote app on the iPhone to see the next screen. Now with Mountain Lion you could even present with a Macbook Pro (not needed though)
Wanna hear the coolest thing? When I want to demo something on the iPad instead of just showing the screen remotely using Airplay I use an App on the iPhone called Air Camera directed down at my iPad screen. The Air Camera sends the video to the Apple TV using Airplay and people are able to see my taps by seeing my fingers.
Another cool thing in a classroom setting with other iPads you are able to let people know your Wifi password and then display their iPad screen up on a projector to ask a question about something or demo something.
So for the extra $99 dolars for the Airport Express and a few minutes setting it up, wammo you have it!
One last note. If you actually do have wired internet at the podium you can connect it to the WAN port of the Airport express and all your iDevices would in addition have internet access. If you need internet access for all the devices and you are presenting in a place without internet then you have to bring a wireless hotspot in place of the airport express. This works equally well (again just setup the connection from the iDevices to the wireless hotspot ahead of time)
Have fun and good luck!

Problem with Lightroom 5: how to connect the app with my original pictures which are on a external hard disk and, once this resolved, how to create virtual pictures

A friend has installed Lightroom 5 on my MacBook air. he transferred all my picture that were on my IPhone an on Iphoto on Lightroom but without making virtual copies systematically. He put the original (real?) pictures on a external hard disk under Data_photos folder to allow more memory space on my Mac book Air. My problem now that when I connect the external hard disk with my computer the connexion does not happen automatically. it is like if Lightromm does not recognize the path to get connected to the original/real picture and therefore I cannot see pictures with all their potential and I cannot work on these. I am stuck! What should I do to 1) create this link? 2) create then virtual copies in order to be able to work on my computer without been obliged to connect my external hard disk to be able to use the application Lightroom. The friend who helped me disappeared! He is not in Japan and unable to help me.I hope you can help me. I have been looking for support to apple stores, photo shops, computer specialists but I have not found the expert capable to help me. I am leaving in Geneva. And believe that I should have some one with me physically to resolve a problem which I believe is not a serious one if one knows lghtroom an dinformatic basics... thank in advance to come back to me asap !!!!

Follow these instructions: Adobe Lightroom - Find moved or missing files and folders

OT: How to create virtual site

Hi there,
I need to setup a virtual host for PHP (which is installed as
http://localhost and works) on my Win
XP SP2 machine.
I need it to test some files of my web site which are root
relative.
Pictures that are site relative do not show because is points
to
http://localhost/images/my_image.jpg
in stead of
http://localhost/mysite/images/my_image.jpg
I trust you can help me doing this.
Regards,
Deon

Deon wrote:
> I need to setup a virtual host for PHP
A Google search for "setting up virtual host Apache Windows"
brings up
this excellent tutorial from Gary White:
http://www.apptools.com/phptools/virtualhost.php
There are also full instructions for how to do it on both
Windows and
Mac OS X in my book, "Foundation PHP for Dreamweaver 8".
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

How to create a wifi network with airport express in hotel room?

When I'm traveling to hotels that have internet, but not wifi, how do I set up a network using airport express? When I've done this at home, I've used my laptop with the airport utility. Can I do it with just an iPad?

Yes, you can use the Airport Utility for iPad here:
https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8

How to create virtual directory in Oracke 10g ias

Hi
In my application i have a upload functionality so that any user once they upload the document i want to store in a directory which is existing on the server so that if anybody wants to open that document it should be opened from the server.
any help is highly appreciable

You don't say whether you are using OC4J standalone or OracleAS:
Here's how you do it with OC4J standalone:
http://buttso.blogspot.com/search?q=virtual-directory
I you are using OracleAS then you'd use one of the standard Apache directives to expose the directory via it (Oracle HTTP Server):
See: http://httpd.apache.org/docs/1.3/urlmapping.html#outside
-steve-

How to creat virtual wifi mini adaptor.

Similar Messages

Maybe you are looking for