How to create 11.2.0.2 physical standby database from 2 node RAC (11.2.0.2)

Hi,
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5
RMAN duplicate is causing problem with network and we decided to go for manual creation of the same.
Thanks in Advance..

Hi;
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5I had similar issue, what i did
1. Used source oracle_home on standby server
2. Created new asm instance and use same naming
3. I took RMAN full backup on source and move it to target
4. I edit initora file remove RAC setting and restore db(also edited listener file)
Regard
Helios

Similar Messages

Creating physical standby database from another physical standby database

hi,
We have one production database and one physical standby of the production. Now we have situation where we need to create one database from either production or from standby. As production is loaded we can not do it using active database option. Now we have the only option to copy the database from standby.
As of now we open the standby and copy it using rman duplicate database and again we put it back to standby mode.
Is it possible to create standby database from standby database only?
Oracle version : 11.1.0.7.0
I have seen procedure allowing to do the same in version 11.2.0.3. I have tried searching for the difference but didn't find when this feature was introduced.
Thanks,
Ketul Patel

Hello;
Active duplicate should work when connected to Standby as source Database. However there's a bug 11715084 which is not fixed until version 11.2.0.4.
If patch 11715084 is available for your version it may work, but all the 11.1.0 are gone so I have no way to test.
RMAN ACTIVE DUPLICATE WHEN CONNECTED TO STANDBY AS TARGET [ID 1343515.1]
Understanding ORA-01671 error during controlfile creation / backup [ID 461121.1]
Best Regards
mseberg
Edited by: mseberg on Feb 13, 2013 8:59 AM

How to create table(s)/indexes on a new database from an existing database

Hello all - I need some help in finishing a task, quick response is really appreciated
So, I have a new database that needs creation of tables including indexes and objects for two different tablespaces called CDS1 and CSD2. I have created these tablespaces and datafiles associated with them. I need some help just to create these tables and indexes from an existing database without copying any of its contents. How can I achieve this, these are 2 different servers at different locations. Can somebody give me step by step instruction - would greatly appreciate it !
Thanks,
Vikas

9876543210 wrote:
Hello all - I need some help in finishing a task, quick response is really appreciated
So, I have a new database that needs creation of tables including indexes and objects for two different tablespaces called CDS1 and CSD2. I have created these tablespaces and datafiles associated with them. I need some help just to create these tables and indexes from an existing database without copying any of its contents. How can I achieve this, these are 2 different servers at different locations. Can somebody give me step by step instruction - would greatly appreciate it !
Thanks,
Vikas
exp help=yes
exp username/password rows=no
How do I ask a question on the forums?
https://forums.oracle.com/message/9362002#9362002

How to find thead 2 archive log when i recover from 2-node RAC to single

I backup 2-ndoe RAC and restore to single - node
Control file created.
SQL> recover database iuckup controlfile
SQL> recover database using backup controlfIle;
ORA-00279: change 12100176131169 generated at 07/06/2013 16:36:57 needed for
thread 1
ORA-00289: suggestion : /arch/hop1_566085708_1_212692.dat -- Oracle suggest
ORA-00280: change 12100176131169 for thread 1 is in sequence #212692
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
arch/sch1_566085708_1_212692.dat --- I input
ORA-00279: change 12100176131169 generated at needed for thread 2
==> Oracle didn't suggest thread 2 archive log file/
How can I find ?

You have to query V$ARCHIVED_LOG for THREAD# 2 on the source database to find the first archivelog where 12100176131169 is less than the NEXT_CHANGE#
select SEQEUNCE# from V$ARCHIVED_LOG where THREAD#=2 and 12100176131169 between FIRST_CHANGE# and NEXT_CHANGE#
Once you provide the Sequence# and file name for the first Thread 2 file, the RECOVER command will automatically generate the expected file name for the subsequent archivelogs (of both threads).
Hemant K Chitale

Creating physical standby databases with DG Broker & OEM

Hi guys,
I manage 8i, 9i & 10g databases through OEM 10.2.0.2.
Today, I would like to create physical standby db for the most important applications. Because I'm a lazy guy, I'd like to do it the easiest way, with GUI and wizzards provided by OEM.
1. Do you know any tutorial on the Internet that would help to do it easily ? My only source up to now is the official DB broker documentation (http://download.oracle.com/docs/cd/B19306_01/server.102/b14230/toc.htm), which is 300 pages long like every Oracle doc. I'd appreciate any tutorial that could lead me straight to the essential. I've heard that is not so tricky to create a physical standby db
2. Is the procedure really different to create (and then manage) a physical standby database on Oracle 8i, 9i and 10g ? Is it possible to do it through DB Broker and OEM for every version ?
thank you for your help
Antoine

Antionio,
Oracle Documentation is the best source of configuring any Oracle component.
But, If you do not want to read the entire doc, and want to configure Dataguard Broker (without OEM), then here is the Link.
http://www.oracledba.org/10g/dr/10gR2_dataguard_RAC_to_RAC.html#Configure_Dataguard_Broker:

Apply missing log on physical standby database

How to apply the missing log on physical standby database?
I already registered the missing log and started the recovery process.
Still...having log on standby that has status ..not applied.
SQL> SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# APP
16018 YES
16019 YES
16020 NO ---------------------> Not applied.
16021 YES
Thanks

Not much experience doing this, but according to the 9i doc (http://download-east.oracle.com/docs/cd/B10501_01/server.920/a96653/log_apply.htm#1017352), all you need is properly-configured FAL_CLIENT and FAL_SERVER initialization parameters, and things should take care of themselves automatically. Let us know if that doesn't work for you, we might be able to think of something else.
Daniel

How to create physical standby database without dataguard

Hi,
Can anyone please help me how to create Physical Standby Database without dataguard. As i am using Oracle 10.2.0.1 Standard Edition for production databases.
Please find the specifications of my server :
Database : Oracle 10.2.0.1(Standard Edition)
Server : Linux 4.0(32 bit machine)
As we know that Dataguard cannot be created in Standard Edition as we dont have that option in this edition. So please help me how to create the physical standby database.
Thanks in advance.
Regards,
Farooq

Hello,
I hope this link helps you out...
http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/rcmbackp.htm
http://www.dbasupport.com/oracle/ora10g/manual_standby.shtml
Thanks & Regards
Pratik Lakhpatwala
Jr Oracle DBA
Edited by: Pratik.L on Dec 31, 2009 12:03 PM

Problem creating physical Standby database with RMAN

Hi All
I am trying to learn oracle dataguard and as part of the process learning creating standby database.
Platform : Sun-Fire-V250 Sparc, Solaris 10
Database Version - Oracle 11R2
I am creating standby database on same server, so directory structure is different.
Following the instructions on Oracle site I managed to create a functional physical standby database. But I am not able to create standby database using RMAN. These are the steps that I followed-
1.Set up all necessary parameters on primary database as done while creating physical standby database manually, eg setting force logging, creating standby logs etc.
2.Edited parameter file on primary database as done while creating manual pysical standby database creation. Some of the changes done are-
On Primary Database:
*.FAL_CLIENT='orcl11020' #Primary database unique name
*.FAL_SERVER='stdby_11' #Standby database unique name
db_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020'
log_file_name_convert='/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11/redo_mem','/<dir>/oradata/orcl11020/redo_mem'
standby_file_management=auto
*.log_archive_config='DG_CONFIG=(orcl11020,stdby_11)'
*.log_archive_dest_1='LOCATION=/<dir>/flash_recovery_area/ORCL11020/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orcl11020'
*.log_archive_dest_2='SERVICE=stdby_11 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) db_unique_name=stdby_11'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
Copied same pfile for standby database and modified following-
*.control_files='/<dir>/oradata/stdby_11/stdby_11.ctl','/<dir>/fra_stdby/stdby_11/stdby_11.ctl'
*.db_name='orcl1102'
*.db_unique_name='stdby_11'
*.FAL_CLIENT='stdby_11'
*.FAL_SERVER='orcl11020'
db_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11'
log_file_name_convert='/<dir>/oradata/orcl11020','/<dir>/oradata/stdby_11','/<dir>/oradata/orcl11020/redo_mem','/<dir>/oradata/stdby_11/redo_mem'
standby_file_management=auto
*.log_archive_dest_1='LOCATION=/<dir>/fra_stdby/STDBY_11/archivelog
VALID_FOR=(ALL_LOGFILES,ALL_ROLES) db_unique_name=stdby_11'
*.log_archive_dest_2='SERVICE=orcl11020 LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
db_unique_name=orcl11020'
3. Add relevant information in tnsnames.ora and listener.ora files and then restart listener.
3. Created password file with same credential as primary database.
4.Up-to-date RMAN backup of primary database available.
5.Create standby controlfile with rman
While primary database s open (I tried with primary database in mount mode as well)-
$>rman catalog rman/paswd@rman target /
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY;
6. Open a new terminal and startup standby database in nomount mode using parameter file created -
$>ORACLE_SID=stdby_11
$>export ORACLE_SID
$>sqlplus / as sysdba
SQL>STARTUP NOMOUNT pfile='<location/initfilename.ora'
SQL>quit
$> rman AUXILIARY / target sys/passwd@orcl11020 catalog rman/passwd@rman
RMAN>DUPLICATE TARGET DATABASE FOR STANDBY DORECOVER;
RMAN finishes without error but archive logs are not being tranported. Looking at the log, following caught my eye-
Error 1017 received logging on to the standby
Check that the primary and standby are using a password file
and remote_login_passwordfile is set to SHARED or EXCLUSIVE,
and that the SYS password is same in the password files.
returning error ORA-16191
FAL[client, ARC2]: Error 16191 connecting to orcl11020 for fetching gap sequence
Errors in file /<>dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
Errors in file /<dir>/diag/rdbms/stdby_11/stdby_11/trace/stdby_11_arc2_24321.trc:
ORA-16191: Primary log shipping client not logged on standby
So on both primary and standby I confirmed
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
To make double sure that password files are same, I shutdown both databases, delete password files and recreated with same credentials.
Password files are called - orapworcl11020 and orapwstdby_11
Can someone guide me where thisngs are going wrong here please.

Not sure if I understood it clearly.
SELECT * FROM V$ARCHIVE_GAP;
returns no rows so there is no gap.
But could you please explain me the result of the previous query. To catch up again, on standby when I check
SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
SEQUENCE# APPLIED
75 NO
74 NO
76 NO
77 NO
I understand that though archive files have been copied across but they are not applied yet.
On primary when I give your query -
SELECT name as STANDBY,SEQUENCE#,applied, completion_time
2 FROM v$archived_log
3 where dest_id=2
4 and sequence# BETWEEN 74 and 80;
I get -
STANDBY SEQUENCE# APPLIED COMPLETIO
stdby_11 74 YES 28-JUN-11
stdby_11 75 YES 28-JUN-11
stdby_11 76 YES 29-JUN-11
stdby_11 77 YES 29-JUN-11
stdby_11 78 YES 29-JUN-11
stdby_11 79 YES 29-JUN-11
stdby_11 80 YES 29-JUN-11
stdby_11 75 NO 07-JUL-11
stdby_11 74 NO 07-JUL-11
stdby_11 76 NO 07-JUL-11
stdby_11 77 NO 07-JUL-11
stdby_11 78 NO 07-JUL-11
I have intentionally given
sequence# BETWEEN 74 and 80
because I know in the current incarnaion of the database, max sequence is 78.
So my understanding is, the rows between 28-29 June are from previous incarnation, correct me if I am wrong
Archive files of the current incarnation, since I successfully created standby database are shipped but yet to be applied - am I right?
Then my final question is, when will these archives be applied to standby database?
I am sorry to ask too many questions but I am just trying to understand how it all works.
Thanks for your help again

Create ONLINE logfile in physical standby database

We have created a physical standby database with rman duplicate command on a remote server
"duplicate target database for standby dorecover nofilenamecheck"
When I see the standby server...Online logfiles are not created however its relevant entries are there in V$LOG and V$LOGFILE views.
I guess it is the default behaviour of duplicate command in RMAN and we can not specify LOGFILE clause when we create standby database.
Now the problem is we could not drop the online logfile on standby database since it's status is "CURRENT", "ACTIVE".
Since the ONLINE LOGFILE are not actually created , "ALTER DATABASE CLEAR LOGFILE GROUP " command returns with error as it could not find the file in the server.
So How we can drop the current/active online logfile and add new ones in standby db?

I'm assuming you have physical standby. Here are step I did in the past.
1) create a backup control file
2) bring the database back using the "recreate control file" it the trace file BUT you need to remove or comment out the line that has the corrupt or missing redo log file. And don't forget to add the tempfile after you recreate the controlfile
example:
alter database backup controlfile to trace;
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "ORCL" NORESETLOGS FORCE LOGGING ARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
LOGFILE
GROUP 1 '/oracledata/orcl/redo01.log' SIZE 200M,
GROUP 2 '/oracledata/orcl/redo02.log' SIZE 200M,
GROUP 3 '/oracledata/orcl/redo03.log' SIZE 200M,
# GROUP 3 '/oracledata/orcl/redo03.log' SIZE 200M
-- STANDBY LOGFILE
-- GROUP 10 '/oracledata/orcl/redostdby04.log' SIZE 200M,
-- GROUP 11 '/oracledata/orcl/redostdby05.log' SIZE 200M
DATAFILE
'/oracledata/orcl/system01.dbf',
'/oracledata/orcl/undotbs01.dbf',
'/oracledata/orcl/sysaux01.dbf',
'/oracledata/orcl/users01.dbf'
CHARACTER SET WE8ISO8859P1
If you just want to add the standby redo log then using this command.
alter database add standby logfile
'/<your_path>/redostdby01.log' size 200M reuse,

What are the differences of creating a physical standby database with ASM?

I want to create a physical standby database for my 10g(10.2.0.1) database. But it is using ASM. Is it possible to create a standby database for a database using ASM?
What are the differences of creating a physical standby database with ASM?

tell us what your research shows and we'll try to
validate it. I am simulating Oracle ASM on a PC and I want to try
DataGuard on it now. So I am trying to create DataGuard
on an ASM system. The purpose is only learning and test.That's telling us how you are researching, not what you have observed.
Your research could have included looking at the documetation, and you might have found http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#sthref1642
which discusses exactly what you are looking for.
Message was edited by:
Hans Forbrich

Creating a Physical Standby Database

Hi,
I'm reading Oracle® Data Guard
Concepts and Administration
10g Release 2 (10.2)
B14239-04.
In 3.2 Step-by-Step Instructions for Creating a Physical Standby Database chapter it says :
3.2.1 Create a Backup Copy of the Primary Database Datafiles and recommend RMAN to do that.
And in
3.2.4 Copy Files from the Primary System to the Standby System
Use an operating system copy utility to copy the following binary files from the
primary system to the standby system:
■ Backup datafiles created in Section 3.2.1
Finally

sorry , I did not finish.
I continue
finally,
3.2.6 Start the Physical Standby Database
Step 1 Start the physical standby database.
On the standby database, issue the following SQL statement to start and mount the
database:
SQL> STARTUP MOUNT;
I wonder , how to transform RMAN backup files to data files ? It is not explained or it is not necessary ?
Many thanks.

Createing a physical standby database.

Hi,
Can we create a physical standby database with in a single system in windows.
If possible please please help me how to do.
Thanks and Regards
Poorna Prasad

Hi,
After making changes in the pfile and when i am starting the database in nomount stage with pfile i am getting the following error
SQL> startup nomount pfile='E:\oracle\product\10.2.0\db_1\database\initoracle.ora'
ORA-16024: parameter LOG_ARCHIVE_DEST_1 cannot be parsed
SQL>
and my parameter file is
oracle.__db_cache_size=427819008
oracle.__java_pool_size=4194304
oracle.__large_pool_size=4194304
oracle.__shared_pool_size=167772160
oracle.__streams_pool_size=0
audit_file_dest='E:\oracle\product\10.2.0/admin/oracle/adump'
background_dump_dest='E:\oracle\product\10.2.0/admin/oracle/bdump'
compatible='10.2.0.1.0'
control_files='E:\oracle\product\10.2.0/oradata/oracle/\control01.ctl','E:\oracle\product\10.2.0/oradata/oracle/\control02.ctl','E:\oracle\product\10.2.0/oradata/oracle/\control03.ctl'
core_dump_dest='E:\oracle\product\10.2.0/admin/oracle/cdump'
db_block_size=8192
db_domain=''
db_file_multiblock_read_count=16
db_name='oracle'
db_recovery_file_dest='E:\oracle\product\10.2.0/flash_recovery_area'
db_recovery_file_dest_size=2147483648
dispatchers='(PROTOCOL=TCP) (SERVICE=oracleXDB)'
job_queue_processes=10
open_cursors=300
pga_aggregate_target=202375168
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=609222656
undo_management='AUTO'
undo_tablespace='UNDOTBS1'
user_dump_dest='E:\oracle\product\10.2.0/admin/oracle/udump'
db_unique_name='oracle'
LOG_ARCHIVE_CONFIG='DG_CONFIG=(oracle,orap)'
LOG_ARCHIVE_DEST_1= 'LOCATION=E:\oracle\product\10.2.0\flash_recovery_area\ORACLE\ARCHIVELOG/VALID_FOR=(ALL_LOGFILES,ALL_ROLES)DB_UNIQUE_NAME=oracle'
LOG_ARCHIVE_DEST_2='SERVICE=orap LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)DB_UNIQUE_NAME=orap'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
fal_server=orap
fal_client=oracle
standby_file_management=auto
db_file_name_convert='d:\orap\data\','E:\oracle\product\10.2.0\oradata\oracle'
log_file_name_convert='d:\orap\data\','E:\oracle\product\10.2.0\oradata\oracle','E:\oracle\product\10.2.0\flash_recovery_area\ORAP\ONLINELOG','E:\oracle\product\10.2.0\flash_recovery_area\ORACLE\ONLINELOG'

How to check data in physical standby database?

Hi!
I'm maintaining physical standby database system. everyday, i must check tranfer and apply progress. I known, it operate very good. No archive gap is found.
But i want to check data in physical standby database that there is consistant with primary database, there isn't? What method do I use? How to do?
thankS

I hope the following will help
Verifying the Physical Standby Database
==========================================
Once you create the physical standby database and set up log transport services, you may want verify that database modifications are being successfully shipped from the primary database to the standby database.
To see the new archived redo logs that were received on the standby database, you should first identify the existing archived redo logs on the standby database, archive a few logs on the primary database, and then check the standby database again. The following steps show how to perform these tasks.
Step 1 Identify the existing archived redo logs.
On the standby database, query the V$ARCHIVED_LOG view to identify existing archived redo logs. For example:
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
2 FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIME NEXT_TIME
8 11-JUL-02 17:50:45 11-JUL-02 17:50:53
9 11-JUL-02 17:50:53 11-JUL-02 17:50:58
10 11-JUL-02 17:50:58 11-JUL-02 17:51:03
3 rows selected.
Step 2 Archiving the current log.
On the primary database, archive the current log using the following SQL statement:
SQL> ALTER SYSTEM ARCHIVE LOG CURRENT;
Step 3 Verify that the new archived redo log was received.
On the standby database, query the V$ARCHIVED_LOG view to verify the redo log was received:
SQL> SELECT SEQUENCE#, FIRST_TIME, NEXT_TIME
2> FROM V$ARCHIVED_LOG ORDER BY SEQUENCE#;
SEQUENCE# FIRST_TIME NEXT_TIME
8 11-JUL-02 17:50:45 11-JUL-02 17:50:53
9 11-JUL-02 17:50:53 11-JUL-02 17:50:58
10 11-JUL-02 17:50:58 11-JUL-02 17:51:03
11 11-JUL-02 17:51:03 11-JUL-02 18:34:11
4 rows selected.
The logs are now available for log apply services to apply redo data to the standby database.
Step 4 Verify that the new archived redo log was applied.
On the standby database, query the V$ARCHIVED_LOG view to verify the archived redo log was applied.
SQL> SELECT SEQUENCE#,APPLIED FROM V$ARCHIVED_LOG
2 ORDER BY SEQUENCE#;
SEQUENCE# APP
8 YES
9 YES
10 YES
11 YES
4 rows selected.

Creating physical standby database on same machine with dataguard

hi every one
i m new in oracle databases,
i read documentation to create physical standby databases,
now i install virtual machine (vmware) on my system,
i install windows xp on this vm and oracle 9i
now i want to create standby database on the same machine in some other drive configured with datagurd
virtual machine
OS windows xp
database oracle 9i
plz reply me how i do this
explain clearly step by step.
plz reply me in detail

When you need to have the standby database on the same server as the master, use lock_name_space in the init.ora.
This parameter permits this to occur without having to worry about changing the db_name.
http://www.oug-ottawa.org/pls/htmldb/f?p=103:21:729607614317189728::::P21_TIP_NUM:821

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to create 11.2.0.2 physical standby database from 2 node RAC (11.2.0.2)

Similar Messages

Maybe you are looking for