How to create 3 Fullscreen Undecorated JFrame with TextField and Button on

I want to design a GUI which consists of Fullscreen Undecorated JFrame and It must be running like a kiosk
So how to deal with as each Jframe will create a new object and it is impossible to manage the heap sapce

harshal_2010 wrote:
I want to design a GUI which consists of Fullscreen Undecorated JFrame Good for you, what have you done so far.
and It must be running like a kiosksee reply #1
So how to deal with as each Jframe will create a new object
MyJFrame f = new JFrame("MyJFrame #1");
and it is impossible to manage the heap sapceYes, you make sure you remove all references to your objects when you no longer need them and Java will do the rest with the GC.

Similar Messages

  • How to create labeled table of Content with expand and collapse

    Hi All,
    Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
    User1
    Template1
    Template2
    User2
    +
    User3
    Template1
    Template2
    Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
    Thanks
    Bhupendra

    Hi,
    Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
    Expand/Collapse are part of HGRID.
    I think we can develop this functionality with little manipulation.
    Regards,
    Reetesh Sharma
    Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM

  • How to create a single line textbox with up-down button?

    Hello,
    I mean for example is a text box for percentage. You can type in the value, or click the up or down button to get the value you desire. I tried attaching a small-sized vertical JScrollBar to a JTextField, but it is getting complicated that I need 2 different listeners(AdjustmentListener & FocusListener) for this.
    If you have done this before, or maybe you have some suggestions, I would appreciate the help. These are some conditions that the percent text box needs:
    - a click on up/down button increase/decrease the value by 1.
    - the user types in a value more than 100 or less than 0 and press one of the button(up/down), setText to 100 or 0.
    - the user types in a value in range, increase/decrease that value when up/down button is clicked.
    Thank you for your time.

    That's called a "spinner". I understand that it's a standard component in SDK 1.4, but I haven't looked at that myself, it's still in its beta stages. If you go to this page:
    http://www.toedter.com/en/jcalendar.html
    you will see an example (JSpinField), and you can download it for your own use.

  • R12: Create on-account Credit Memo with invoicing and accounting rules

    In R12.1.2: when using the AR_INVOICE_API_PUB it seems to be impossible to create a on-account Credit Memo with invoicing and accounting rules. The next errors are returned by the API:
    - AR_INAPI_INV_RULE_NOT_REQUIRED
    Do not include an invoicing rule if the transaction type's class is Debit Memo or Credit Memo.
    - AR_INAPI_RULE_NOT_ALLOWED
    Do not enter an invoicing or accounting rule for on-account credit memos
    Please advice how to create on-account Credit Memo with invoicing and accounting rules using an API.
    Edited by: nl05517 on Jan 17, 2011 10:43 PM

    We will use the AR_CREDIT_MEMO_API_PUB api.

  • How to create a custom function module with the records in SAP R/3?

    Hi All,
    How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
    Regards
    Sara

    Hi
    goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
    Look at the below SAP HELP links, These links will show you the way to create a Function Module
    http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

  • How to create Using Formatted Text Field with multiple Sliders?

    Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
    my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
    // constructor
    label1 = new JLabel( "Individuals" );
    scroller1 = new JSlider( SwingConstants.HORIZONTAL,     0, 100, 10 );
    scroller1.setMajorTickSpacing( 10 );
    scroller1.setMinorTickSpacing( 1 );
    scroller1.setPaintTicks( true );
    scroller1.setPaintLabels( true );
    scroller1.addChangeListener(this);
    java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
    NumberFormatter formatter = new NumberFormatter(numberFormat);
            formatter.setMinimum(new Integer(0));
            formatter.setMaximum(new Integer(100));
    textField1 = new JFormattedTextField(formatter);
    textField1.setValue(new Integer(10)); //FPS_INIT
    textField1.setColumns(1); //get some space
    textField1.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField1.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField1.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField1.selectAll();
                    } else try {                    //The text is valid,
                        textField1.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    label2 = new JLabel( "Precision" );
    scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
    scroller2.setMajorTickSpacing( 10 );
    scroller2.setMinorTickSpacing( 1 );
    scroller2.setPaintTicks( true );
    scroller2.setPaintLabels( true );
    scroller2.addChangeListener(this);
    textField2 = new JFormattedTextField(formatter);
    textField2.setValue(new Integer(10)); //FPS_INIT
    textField2.setColumns(1); //get some space
    textField2.addPropertyChangeListener(this);
    //React when the user presses Enter.
    textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0),  "check");
            textField2.getActionMap().put("check", new AbstractAction() {
                public void actionPerformed(ActionEvent e) {
                    if (!textField2.isEditValid()) { //The text is invalid.
                        Toolkit.getDefaultToolkit().beep();
                        textField2.selectAll();
                    } else try {                    //The text is valid,
                        textField2.commitEdit();     //so use it.
                    } catch (java.text.ParseException exc) { }
    // State Changed
         public void stateChanged(ChangeEvent e) {
             JSlider source = (JSlider)e.getSource();
             int fps = (int)source.getValue();
             if (!source.getValueIsAdjusting()) { //done adjusting
                  if(source==scroller1)   {
                       System.out.println("source ==scoller1\n");
                       textField1.setValue(new Integer(fps)); //update ftf value
                  else if(source==scroller2)     {
                       System.out.println("source ==scoller2\n");
                       textField2.setValue(new Integer(fps)); //update ftf value
             } else { //value is adjusting; just set the text
                 if(source==scroller1)     textField1.setText(String.valueOf(fps));
                 else if(source==scroller2)     textField2.setText(String.valueOf(fps));
    // Property Change
        public void propertyChange(PropertyChangeEvent e) {
            if ("value".equals(e.getPropertyName())) {
                Number value = (Number)e.getNewValue();
                if (scroller1 != null && value != null) {
                    scroller1.setValue(value.intValue());
                 else if (scroller2 != null && value != null) {
                    scroller2.setValue(value.intValue());
        // ACTION PERFORMED
        public void actionPerformed(ActionEvent event) {
        if (!textField1.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField1.selectAll();
        } else try {                    //The text is valid,
            textField1.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
             if (!textField2.isEditValid()) { //The text is invalid.
            Toolkit.getDefaultToolkit().beep();
            textField2.selectAll();
        } else try {                    //The text is valid,
            textField2.commitEdit();     //so use it.
        } catch (java.text.ParseException exc) { }
    ...

    if :p3_note_id is null
    then
    insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
    Another option is that you have a trigger on table NOTES that generates a new note_id even for an update.

  • How to creat a summary of report with .txt

    Hi All,
         I want to creat a summary of report with .txt,and i have disabled the function about report generation in teststand.
         i created a complex sequence,it include some sub-sequences,example:the uut is tested on three different temperatures and four different voltages conditon.So i have creat three sub-sequences (diffrent temperatures) include four steps (different voltages),then mainsequence invoke three sub-sequences to excute test.
        i only want get the fail-step's summary with,include: fail-step's name,status 
        how to do?thanks a lot
    Solved!
    Go to Solution.

    You can use Parameters.Step.Name to get the failed step name. You can also use something like Parameters.Step.StepType.Name == "NI_MultipleNumericLimitTest" to filter different types of steps.
    As far as finding the entire failure chain...
    You can check RunState.CallStackDepth to see how many callers deep you are. Based on that information you can use RunState.Caller.Caller.(continued for however many callers deep you are).RunState.Step.Name or .Sequence.Name
    So if the CallStackDepth is 1, you would only need to use one Caller. If it was 2, you would need to recursively use 1 Caller and then 2 Callers and so on.
    CTA, CLA, MTFBWY

  • How to Create an Input Schedule Comparison with Data Using EVDRE

    Hello,
    I try implement the scenario described in "How to Create an Input Schedule Comparison with Data Using EVDRE".
    Once I am using the "Insert Function" from the panel and selecting the EVTIM function Excel crashes (see page 8 How to paper).
    Systems:
    BPC 7.0 NW SP02
    Office 2007
    BPCADminClient and BPCOfficeClient up to date
    Have anyone a solution?
    Thanks
    Oktay

    Hi Oktay -
    This function works in my BPC70NW SP02 system. Your issue might be that you are trying to access a TIME member that does not exist. Please make sure the offset value is a valid dimension member.
    I can confirm that EVTIM does allow the offset for base members (such as 2009.MAY) as well as parent nodes (such as 2009.Q1 or 2008.TOTAL)... BUT...the offset result of the EVTIM function needs to be a valid dimension member!
    Regards,
    Sheldon

  • How to create user editable Crystal Report with dynamic dataset

    What I would like to achieve:
    A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
    What I do:
    CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    CrReport.Load(TemplateFilename)
    Dim Results As DataTable
    DataTable is filled from a database
    CrReport.SetDataSource(mResults)
    CrReport.SaveAs(NewReportPath, True)
    The NewReportPath is opened in the default program.
    What are the problems
    The report is open in preview mode (not in design).
    When the field is added to the report the designer asks for XML datasource on preview.

    The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

  • How to creat the Varient for 1099MISC With Holding Tax

    How to create the Variant for 1099MISC With Holding Tax ?

    HI,
    please follow the below steps to create variant at report.
    tcode se38
    report RFIDYYWT
    pass all the parameters
    press save icon
    give variant name
    retrive the variant in report
    tcode se38
    report name RFIDYYWT
    press : shift + F5
    or get varinat icon.
    I hope above will resolve your issue.
    Regards
    Madhu M

  • How to create new view without interlinking with gantt chart or resource views

    ok clear
    one another question
       In msp how to create new view without interlinking with gantt chart or resource views

    Hi Shiv PMC--
    I splitted your question above in another thread in order not to have  a huge thread with many topics in it.
    That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
    table) or a table with a timephased grid (resource and task usage).
    Please give us more information, maybe with a concrete example so we can help you.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • How to create tcode for modulepool program with selection screen?

    hi,
       How to create tcode for modulepool program with selection screen?
    thanks,
    sagar

    Hi,
    We need to goto SE80.
    In our program we right click on object name and goto create
    -> transaction. Enter the module pool program and screen number and save and activate.
    Or by SE93 also we can create a transaction code for our program.
    Hope ths helps.
    plz reward if useful.
    thanks,
    dhanashri..
    Edited by: Dhanashri Pawar on Jul 22, 2008 8:29 AM

  • How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ?  iDVD Manuals that I have read seem to avoid explaining that export process.  Any advice will be greatly appreciate

    How can I use slideshows that I have created in Aperture 3 (complete with captions and music tracks) in my DVD through iDVD version 7.1.2 ?  iDVD Manuals that I have read seem to avoid explaining that export process. I'm using Aperture 3, Mac OS X (10.7.5), on a Any advice will be greatly appreciated.  Anthony Zasadney, Bolingbrook IL.

    Export the slideshow from Aperture as a .mov file and import it into iDVD.

  • How to create a report in Form line Style and can display Image field?

    Hi,
    In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
    I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
    But in Paper Layout, my report can not display Image field.
    I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
    How to create a report in Form line Style and can display Image field?
    I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
    Thanks & regards,
    BACH
    Message was edited by:
    bachnp

    Here you go..Just follow these steps blindly and you are done.
    1) Create a year prompt with presentation variable as pv_year
    2) Create a report say Mid report with year column selected 3 times
    - Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
    - Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
    - Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
    Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
    3) Create your main report with criteria as Year and Measure col
    - Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
    - Now put a filter on year column with Filter based on results of another request and select these:
    Relationship = greater than or equal to any
    Saved Request = Browse Mid Report
    Use values in Column = YEAR-1
    - Again,put a filter on year column with Filter based on results of another request and select these:
    Relationship = less than or equal to any
    Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
    Use values in Column = YEAR+1
    This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
    This will 100% work...
    http://i56.tinypic.com/wqosgw.jpg
    Cheers

  • Adobe premiere elements 12 - how to create menu bar action for my inserted image button

    adobe premiere elements 12 - how to create menu bar action for my inserted image button without using their movie menu theme

    forbemag
    I do not think that I am completely focused into this completely, so let us see if the following is going to help.
    You are going to need a base for your button. When you mention "image" button, I am assuming that you are using that term to differentiate between a text button and a thumbnail type button.
    The menus (main and scene) take their origin in .psd files on the hard drive and strict nomenclature and structure for Layers Palatte. And, the buttons on the menus trace back to the menu markers on the Timeline, main menu marker and order of placement of scene markers. The scene thumbnail will only appear when there is a scene marker on the Timeline to which it.
    In view of all that
    Where have you already inserted this "image (button)"...into the Layers Palette of a Photoshop document or other? Is this "image (button)" in a structured Layer Group in the Layers Palette with sublayer groups, text layers, graphic/background layer"?
    Let me give you an example
    If you have a button (with thumbnail) on the main menu and you want that to open to a specific scene in your movie, then you use a main menu marker on the Timeline at the spot that you want that button to target.
    If I am getting closer to what you seek, then please further clarify the DVD navigational envisioned scheme.
    Thanks.
    ATR
    Add On...I did not see the exchanges between us and SG until after I had posted mine. I thought that your discussions were concluded. Please excuse the interruption.

Maybe you are looking for