How To Create a Animation Between 2 Images?

Hai , I am Ramesh , i know this is a chilly Question , but , i want know how can i give tweening between 2 images (Just like a Shape tweeening )
ie:
          in 1st frame 1 draw a rectangle shape and 25th frame i draw a circle shape that the time i give a shape tweening means it comes correctly (the shape converts to another shape)
          but the same concept i gave it for image means it is not comming properly ,
i know this is a small and chilly question , but i want learn it

You may not get the results you expect, but if you use the trace bitmap command on both images on the timeline (Modify -> Bitmap -> Trace Bitmap), that will break them down to shapes that you can then apply a shape tween to.

Similar Messages

  • How to create the relationship between ESSBASE 11 and DM in OBIEE11

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok.
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create the relationship between ESSBASE 11 and DM  in OBIEE 11G?

    Hi Experts,
    I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
    But another data source is essbase and based on this source, I create all reports.
    In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
    So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
    I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
    When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
    However, when I remove the column 'Open Date'. it will be ok
    So what I missing the steps? Please help me. Thanks.

    >
    '2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
    If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
    I think it does not work.Right?Hi,
    I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
    I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
    So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
    When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
    Hope I was clear, and this helps.
    Thank you,
    Dhar

  • How to create a link between 2 cells in different spreadsheets?

    when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?

    In the cell where you want the duplicate data to appear from another sheet/table do the following:
    type the equal sign ("=") then click the cell you in the sheet table while contents you want to appear in the cell where you just typed the equal sign"
    it reads "The cell I click equals the result of the formula or the contents of the next cell I click"

  • How to create database link between oracle9i database and oracle10g

    How to create database link between oracle9i database and oracle10g
    oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
    oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
    Please help me on this

    For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
    Connections between 10.2 and 9.0.1 was never been supported.
    Cheers !!!!
    Bhupinder

  • How to create a contact sheet of images in CS5

    How to create a contact sheet of images in CS5.  Different set up than older version I worked on before.

    Have I missed something that the Adobe Bridge Output Module didn’t seem to offer a printing option?  Tried the older plug-in which is what I was familiar with, but that seems to download all the plug ins, not just contact sheets. Do I have to download the whole shebang?

  • How to create a connection between SAP BPC 10.0 to SAP BOBJ

    Hi friends,
    My client want see the reports in BOBJ which are built in SAP BPC. How to create the conncetion between BPC and BOBJ.
    1.Is there any guide to create such connection ?
    2.how the data feed to BOBJ reports?
    please help me ASAP.
    Regards,
    Saida Reddy G

    Hi,
    Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5?QuickLink=index&…
    How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation
    Hope it helps...
    regards,
    Raju

  • How to create an relation between two block

    Oracle forms 6i
    Hai All
    I have created a form in that i have four button ADD, QUERY, SAVE ,EXIT.
    I have two block named Leader and members.
    Four fields in leader block namely name , codeno, deptcode, unitid.
    When i pressed query button and the cursor goes to name field in leader when i enter the name of leader and click
    enter i gives the codeno, deptcode and unitid of the leader_name.
    so now i have created another block in tabular structure to bring the members in the same deptcode that belongs to Leader_name.
    So pls tell me the steps how to create the relation between these two blocks.
    when i enter the leader_name and gives enter it needs to bring the codeno, deptcode, unitid and
    I also need to gives the members in that deptcode..
    Thanks In Advance
    Srikkanth.M

    If it is possible to create relationship with one table No.
    Or
    I have created a pre-Query in the detali block and my code is
    set_block_property ('block_name', default_where, 'deptcode = (select deptcode from emplmaster where name like :block_in_which_leader_name.leader_name_field');BTW no need of joining here it can be solve by set the block's where clause as u said in ur earlier post above. Just changing the little bit this statement and then try.
    If numeric
    set_block_property ('block_name', default_where, 'deptcode = '||:block_in_which_leader_name.leader_name_field);
    Otherwire
    set_block_property ('block_name', default_where, 'deptcode = '''||:block_in_which_leader_name.leader_name_field||'''');-Ammad

  • How to create radio button between two slection screen

    hello all.
    could you please guide me how to create radio button between two SELECTION-SCREEN  in screen painter.
    Thank you,
    srinivas

    hi
    SEE THIS CODE
    REPORT  ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
    ******DATA DECLARATIONS**********
    DATA : BEGIN OF IT_PLANT OCCURS 0,
            MATNR LIKE MARA-MATNR,
            WERKS LIKE MARC-WERKS,
            PSTAT LIKE MARC-PSTAT,
            EKGRP LIKE MARC-EKGRP,
           END OF IT_PLANT.
    DATA : BEGIN OF IT_PONO OCCURS 0,
            EBELN LIKE EKKO-EBELN,
            EBELP LIKE EKPO-EBELP,
            MATNR LIKE EKPO-MATNR,
            WERKS LIKE EKPO-WERKS,
            LGORT LIKE EKPO-LGORT,
           END OF IT_PONO.
    TABLES EKKO.
    ********END OF DATA DECLARATIONS*********
    ********SELECTION SCREEN DESIGN ***********
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
    SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R4 RADIOBUTTON GROUP G2.
    SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B2.
    ******END OF SELECTION SCREEN DESIGN****************
    <b>rEWARD IF USEFULL</b>

  • How to create a relationship between 2 GOS objects

    Hi all,
    I have a small problem how to create a link between 2 GOS (businnes objects) .
    I have 2 different business objects ( Z* type, for example class Z1 and Z2) defined using SWO1, and I want to create link between instances of 2 GOS objects.
    I try to use FM 'BINARY_RELATION_CREATE' ,
    fill parameters OBJ_ROLEA , OBJ_ROLEB ,
    but I know how to fill parameter RELATIONTYPE.
    All the time I got a message RL 301 (Role type '&1' is not assigned object type '&2').
    Should I make some customization (and how ) for roles of object Z1 and Z2 ?
    Or should I use any general relationtype ?
    Can somebody helo me to explain, how to make customization , or any link, example ?
    Thanks in advance
    Milan Dobias

    Thanks for Your answer, but main problem is what relation type use to create link between 2 common objects.
    Your solution (use class CL_BINARY_RELATION) returns the same error message, because this class is used in FM BINARY_RELATION_CREATE.
    In the end I found that solution is to use as relationtype (ORBRELTYP-RELTYPE  = 'ASGN').
        CALL FUNCTION 'BINARY_RELATION_CREATE'
          EXPORTING
            obj_rolea      = obj_a
            obj_roleb      = obj_b
            relationtype   = 'ASGN'
          EXCEPTIONS
            no_model       = 1
            internal_error = 2
            unknown        = 3
            OTHERS         = 4.
    It seems to work and on both objects (A and B) I can see link (relation).
    Best regards,
    MD

  • How to create shared folder between mac and windows

    how to create shared folder between mac and windows

    Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

  • How to create an animated gif with CS4?

    Trying to create an animated gif from 8 images using FW CS4.  Can't find "how to" via online FW help.  Have done it before with version 8 -- followed the in-house Help db but CS4 doesn't have in-house db.  I found a tutorial: http://www.entheosweb.com/website_design/animated_gifs.asp, but talks about opening Frames panel (Windows > Frames) and  I can't even find the Frames panel in CS4!
    Just trying to create simple animated gif as temporary portfolio.  Would also like to click on a different link for each image as it rotates if that's possible but main thing is just to create the gif.
    Thanks so much in advance!

    For the first part of your question
    File > Open, then at the bottom of the dialog Tick the open to Open As Animation.
    Then browse/select multiple images, then Open.
    This will automatically add each image to a State (Window > State, previously called Frames).
    Then adjust the Frame Rate of each State. The default is 7th/100 (a sec). You should see the number 7 to the right of each State. Double click to adjust as desired. 100 = 1 second, 200 = 2 seconds and so on.
    Once the animation is configured, go File > Save As > Animated Gif.
    h

  • How to create ODBC connection between Oracle 10g and MS SQL Server

    Hi,
    Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
    Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
    The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
    Please help
    Thanks
    Shanil

    Hi,
    If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
    Heterogeneous Connectivity
    If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
    How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB     (Doc ID 191368.1)
    As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
    SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
    Hope it helps,
    Greg

  • How to create a link between database schema?

    Hi,
    I have created database link between two database schema (From DBSchema2 i have created database link for DBSchema1). From DBSchema2, i have quried one table (This table is present in DBSchema1). But it throws an error says that Table or View does not exist. Anyone pls tell the detailed way to create database link between schema??
    Thanks,
    Sathish kumar D

    Yes iam trying to Archive
    I said achieve not archive. Anyways so you are trying to archive the data. Can you just detail your requirement ? What exactly do you want ?
    Only few tables will be moved to Archive Schema and other foriegn key tables will have a reference to the Live Schema. So how i can create the link between the Archive Schme to Live schema?
    There is no question of creating database links between 2 schems. It is pure stupidity. If you want to access any object from another schema grant proper privileges and create a synonym for the object. Database links are not meant for this purpose.
    Amardeep Sidhu
    http://www.amardeepsidhu.com

  • How to create database link between oracle and SQL Server

    Hello Everyone,
    Here i have Oracle Database 9i and SQL Server 2005 databases.
    I have some tables in sql server db and i want to access from Oracle.
    How to create a database link between these two servers
    Thanks,

    Thanks for Everyone,
    I was struggle with this almost 10 days....
    I created Database link from Oracle to SQL Server
    Now it is fine.........
    Here i am giving my servers configuration and proceedure how i created the db link...@
    Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
    Machine (1)
    DB Version : Oracle 9.2.0.7.0
    Operating System : HP-UX Itanuim 64 11.23
    IP : 192.168.0.31
    Host : abcdbt
    Machine (2)
    Version : SQL Server 2005
    Operating System : Windows server 2003 x86
    IP : 192.168.0.175
    Host : SQLDEV1
    User/PW : sa/abc@123! (Connect to database)
    Database : SQLTEST (exsisting)
    Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
    Prerequisites in Machine (2):
    a)     Oracle 10g software
    b)     User account to access SQL Server database (sa/abc@123!)
    c)     Existing SQL Server Database (SQLTEST)
    d) Tables (testing purpose) (T)
    Steps:
    1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
    2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
    Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
    You can follow this link also.....
    http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
    I created DSN as
    DSN name : SQLTEST
    User : SA/abc@123! (Existing user account)
    Host : 192.168.0.175 (machine 2)
    Already I have 1 database in SQL Server with the name SQLTEST
    You can create DSN with different name also (not same as db name also)
    3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
    Create init<DSN NAME> file
    Ex: initSQLTEST
    Copy inithsodbc to initSQLTEST
    And edit
    initSQLTEST file
    HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
    HS_FDS_TRACE_LEVEL = OFF*
    save the file....@
    4)     Configure Listener.ora *(Machine 2)*
    LISTENER_NEW =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
    SID_LIST_LISTENER_NEW =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
    (ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
    (PROGRAM = hsodbc))
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc) )
    :> lsnrctl start LISTENER_NEW
    5)     Configure tnsname.ora *(Machine 2)*
    SQLTEST11 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = SQLTEST))
    (HS=OK)
    :> tnsping SQLTEST11
    If No errors then conti….
    6)     Configure a file *(Machine 1)*
    Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
    Create a file
    $ vi TEST_abcdbt_ifile.ora
    something=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
    (CONNECT_DATA=
    (SID=SQLTEST))
    (HS=OK)
    $ tnsping something
    $ sqlplus system/manager
    Your connected to Oracle database *(machine 1)*
    create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
    select * from t@xyz;10 rows selected.
    Thanks,
    Edited by: ram5424 on Feb 10, 2010 7:24 PM

Maybe you are looking for