How to create a blu-ray disc with multiple source files

Hello,
How is it possible to create a blu-ray disc, AVCHD recordable DVD with multiple source files from Final Cut Pro 10. Is it possible to create a menu with several chapters corresponding to the sequences (source files)?
Thank you in advance for your support.

Assume you're talking about using the Create Blu-Ray batch template. It's not possible to do with multiple source filles. But if I understand your objectives, you could pretty much get what you think want – discrete movie segments on a single disk with navigation.
The way I'd approach it is by making multiple projects in FCP and then copying the finished versions into a new project, separated by gaps. (You could also use compound clips but I'm not a fan except for very short sequences, which is why I'm suggesting the copy route.) Then export and bring into Compressor.
In Compressor mark your chapters at the gaps between your individual sequences. Then choose the AVCHD option in job actions.
Bear in mind that you'll have to keep the recording time under roughly 30-35 minutes @a5 Mbts/sec
Good luck.
Russ

Similar Messages

Problems Creating a Blu-ray Disc with a Main (Static) Menu and Pop-up Menus

I'm having problems creating a simple Blu-ray disc containing a Main Menu (Static Menu with a graphic for my background) and a single Pop-up menu assigned to all of my timelines. I wouldn't think this would be so hard to create but every attempt I've made ends up with the navigation getting all messed up to the point that my Playstation 3 doesn't even recognize that the disc as being Blu-rey disc.
I want a simply static Main menu containing a "Play all" Button, and a button for each additional timelines. Im also using the override commands on my buttons so if someone just chooses to see one specific clip from the main menu, they will be taken back to the main Menu after their selected clip plays. But then I also want a Pop-up menu assigned to the timelines so the viewer can switch to a different clip (timeline) without having to go back to the Main (static) menu.
My Blu-ray Disc runs just fine if I only use a static menu in a project, or if I only use a single Pop-up menu assigned to each timeline, but not both a Static Main menu, and pop-up menus. I'm using CS4
Thanks.

it's just copying files to it, not video. If you put a blank blu-ray disk in the drive, it may show up in the finder. A program like Toast can burn a blu-ray.
http://www.roxio.com/enu/products/toast/titanium/overview.html

Clips hang up and repeat on Blu-ray disc with multiple clips

I have developed a DVD for background videos at my office.
It has 44 clips on it.
Only a few will play.
I have tried it on 4 different BluRay DVD players = same result.
I have burned the project 5 times = same result.
Why does it stick?
Using the fastforward button on the remote controll shows all clips are there.
Sometimes it will play 8 or 10 clips before sticking.
Then it repeats the same 2 clips forever.
Please help me.
Rob

Rob,
Could not find the screen-caps. If they are JPEG or PNG, just use the little "camera" icon in the editing page to "attach" them, or post a URL for others to view them from a server. This ARTICLE will give you some tips on screen-caps.
Thank you for the info, and the description of what you wish to have happen.
Now, what are the End Actions for each Timeline? If I understand what you want, the End Action for each Timeline should be to the next, and for the final Timeline, back to the beginning of Timeline 1. That will create the "looping."
Check carefully for any Overrides, and make sure that each is set to "Not Set."
Good luck,
Hunt

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

HT200139 ?How can i watch a blu-ray disc with my iMac

I accindentally bought a blu-ray, ok, but now I see it... How can i match a blu-ray disc with iMac?

Youneed some bluray software such as this:
http://www.macblurayplayer.com
I use and it seems OK, plays a wide variety of formats.
Al

Creating a Blu-Ray disc:

Hello,
I tried to create a blu-ray disc witj Fonal Cut Pro 7 (menu Share) and with Final Cut Pro X Trial (menu Share), but both the times after a certain period of processing (about an and a half) an error message appears, QuickTime Error:0
Has anyone experienced such a problem, I can't burn a Blu-Ray disc with my bramd new HD drive and it seems that Final Cut Pro has a problem? Before buying Final Cut Pro X ...
Thank you in advance
Claudio Tagnin
[email protected]

it's just copying files to it, not video. If you put a blank blu-ray disk in the drive, it may show up in the finder. A program like Toast can burn a blu-ray.
http://www.roxio.com/enu/products/toast/titanium/overview.html

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

Workflow asked: 70min hd project (PAL 1080i50)to blue ray disc with toast 11

i tried to render a final cut Pro HD project (PAL 1080i50) into a blue ray disc with toast 11.
At the end camera pans juddered in a fast rhythm
My steps are:
build a HD timeline in FCP
export timeline to a quicktime movie
load the quicktime movie in Toast 11
toast dit convert the qtm-file again
and burned the blue ray with the result described above.
Thanks for answers

Please examine my workflow. Perhaps you quickly find out any error:
footage: PAL 1080i50 field order : lower field
70 minutes sequence: the same options
exported timeline into a Quicktime Movie - same option
loaded the resulting QTM into Toast 11
Tost started to rerender during 2 hours and burned blue ray disc
at last
medium: verbatim double layer blue-ray disc
Player: tested on two Philips blue ray players
Result
on tv-screen (hd flat screen philips) camera pans judder in a regular rhythm, perhaps twice in a second: the actor seems making little jumps when he walks silently from the right to the left or vice versa.
earlyer we tried to burn a blue ray disc directly from FCP 7.0.3 by using the option "send to blue ray"
The result was the same.

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

Could you take a screen shot of the error message and post it?
Can you export a master file OK?
Russ

Howto deal with multiple source files having the same filename...?

Ahoi again.
I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
The svn.connector consists (among other things) of two files which are named the same:
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
But of course I would prefer a nicer solution to this problem if possible. ^^
TIA!
G_Syme

Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
OK, I've filed a bug report and have also included a suggestion how to solve this problem.

How do I create Blu Ray Disc with DVD Studio Pro ?

Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
5-) Now I got a HVDVD_TS folder, with my movie compilation...
NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
thanks a lot for any help.
Best Regards
Marcelo

That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
Get the original source back and go the toast route from the start.
Message was edited by: Eric Pautsch1

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

Adobe Premier Elements 12 - Exporting trimmed AVCHD files from the project timeline, to a separate folder for burning to Blu Ray disc with other software?

Hi, can anyone help please. This is the first time I have used this forum.
I use Premier Elements 12, a PC, 64 Bit, Windows 7, high powered computer.
Just started trimming AVCHD in this software.
I would like to know if it is possible to export trimmed AVCHD files to a folder elsewhere (files which were originally imported into the project timeline), so that I can burn the trimmed AVCHD files (not in 'Project' form) to Blu Ray disc (using another software which I know that works to burn video files to Blu Ray disc).

Kathy
Thanks for the update. Your progress sounds very good.
Premiere Elements 11, 12, and 13 are similar. But, version 13 has significant feature removals and a new Elements Organizer.
So, when viewing or reading tutorials, try to determine the version of the program being used for the tutorials. As I typically write
principles tend to remain the same from version to version, but the features tend to move, change, or be discontinued from version
to version. And, it is frustrating to be armed with principles when you cannot find a feature.
Some Comprehensive Free Resources for version 12.....
http://tv.adobe.com/show/learn-premiere-elements-12/
http://help.adobe.com/archive/en/premiere-elements/12/premiere-elements_reference.pdf
http://help.adobe.com/archive/en/elements-organizer/12/elements-organizer_reference.pdf
ATR Premiere Elements Troubleshooting: Premiere Elements 12 First Look Details
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
Please do not hesitate to ask if questions or need clarification.
Best wishes
ATR

How to play unprotected Blu Ray discs on a Mac ?

Hi,
I own Blu Ray recorder from Panasonic (DMR BW500) on which I record TV.
I, then, can copy the shows on Blu Ray discs.
I plan to buy a MacBook Air + Blu Ray player/DVD recorder instead of the external Apple superdrive.
Will VLC read the unprotected Blu Rays ?
What if I use Windows ?

This is what I have. Works Great !
http://www.amazon.com/gp/product/B00HW7LQ6G/ref=oh_aui_search_detailpage?ie=UTF8 &psc=1

How to create a blu-ray disc with multiple source files

Similar Messages

Maybe you are looking for