How to create a "blueprint" using solution manager?!!

I have been asked to create a 'blueprint" using solution manager!! I have absolutely no clue how this can be achieved using solution manager!! Please guide me on what is to be done.Would appreciate if you donot give me links of help.sap as the same is not making sense to me.
I have to create a blueprint for 20 countries of SAP reports available for FICO. Some of these reports are country specific while others are generic.

Hi Suchita,
You can create blueprint document using SOLAR01 transcation, provided you must have included all the organizational data, business process, master data,,
Follow the path
transaction SOLAR01->Business Blueprint-> Generate Blueprint
You must have created a solution and a project assigned to that solution also.
further clarifications feel to post the query
regards
Naveen
Edited by: Naveen kumar Palanichamy on Jan 2, 2008 7:16 AM

Similar Messages

How to monitor BI & PI using Solution Manager 4.0

Hi, we have installed Netweaver 04S SR2 SP11 BI & PI components. We want to use Solution Manager 4.0 to setup monitoring for these 2 systems. Any guide or documentation will be greatly appreciated.
Thanks in advance.
Arshish

Hi Arshish,
To setup monitoring you will first have to include these systems in the system landscape of SAP solution Manager 4.0 in transaction SMSY.
The steps in the order are :
1. Create Server ( Server name ,IP and Fully qulaified Host name)
2.Create Database (Give the database you are using)
3.Then you have to create the system itself. and give the information as required.You will be able to do it when you will go through it.
Then you have to generate the RFC's from solution manager to satellite systems and back.These RFC's have to be trusted.Assign role SAP_S_RFCACL or profile S_RFCACL to the users in SOLMAN as well as satellite system.
Follow these steps and create a Logical component for the system that you have added.
Follow these steps first.More information can be found out on
service.sap.com\solutionmanager
or you can look for the RKT'S on service marketplace.If you need any furthur assistance do reply back.
please award points if found helpful
Best Regards
Amit

How to create System component in solution manager

Dear Experts,
How to Add a new (Custom) system component in solution manager which is used for service desk and also how to replicate the same component while creating support message (i.e., in F4-help for component filed).
Thanks in Advance.
Thanks and Regards,
*bold* Thirukumaran. R *bold*

check this blog:
/people/dolores.correa/blog/2007/10/06/service-desk-solution-database
basically it is at:
IMG under SAP Solution Manager -> Configuration -> Scenario-Specific settings -> Service Desk -> Solution Database
Nesimi

How to apply patches by using solution manager system?

HELLO FRIENDS,
    when i download the patch SAPKB70012 & next level patches from service market place, it says that we have to apply the following packages by using maintenance optimizer(solution manager). here i have solution manager4.0., please any one let me know how to configure the maintenance optimzr and how to apply support packages by the solution manager system.
          Thanks&Regards
           Farkath.C

Hello
Solman will not implement the files you can download the files using Solman. You need to move the downloaded files to application server and implement them for that you need to configure MoPZ
You can go to server market place service.sap.com/RKT in that select Solution manager.
You will have to select the product as solution manager 7.0 and in technology consultants and system administrator you will find the configuration documentations in for for SIM files.
You can use that and learn how to configure the optimizer on the system.
Then you can download the files and implement the same.
Regards
Vivek

BI blueprint using Solution manger

Hi,
we have adopted SAP best pratice, and working with Solution manager.
what should we have to do while blue printing of BI.
as here all functional consultant as per solution manager defining :
org element, bussiness senario and bussiness process using solution manager.
how to do BI blueprinting with solution manager?
if u have any idea?
regards,

Hi
check it out
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/3f99cc89-0701-0010-9c86-eae847ae6cd2?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5348ada6-0301-0010-f38f-a5076178843e

How do you create a graph in the blueprint of solution manager?

Hi,
Does anyone know how to create a graph in the blueprint of solution manager?

Is a graphic, i´m gonna to summarize you in a chart what i´m doing ....i hope you understand and can help me....
i sinchroniced Solution Manager with Aris for Netweaver and i want to see the graphics that
were created in ARIS for netweaver in Solution Manager but can not be .
I have been researching and not have to see if the Web service??
Thanks!!!
Edited by: Mariana Lavastida on Aug 14, 2008 2:33 AM

How to use solution manager in upgrade projects

Hi,
How to utilize/use the solution manager in upgrade project like R/3,BW,CRM or entire landscape.
if we are upgrading the r/3 4.6c to ecc6 and bw3.5 to bi7.0 how to use the solution manager
please help and thanks in advance.
Edited by: MAHIPAL REDDY on Jan 1, 2009 1:28 PM

Hi,
Check [this document|https://websmp208.sap-ag.de/~sapdownload/011000358700002696532005E/310_320_SOLMAN_URMP_EN.doc]. This will help you to proceed further.
This is a detailed documentation on using Solution Manager for your upgrade project.
This will solve your problem.
[This Pdf |https://websmp208.sap-ag.de/~sapdownload/011000358700000208052007E/Upgrade_FAQ_SolMan_70.pdf]of FAQs on upgrade project is rich in information.
Feel free to revert back.
--Ragu
Edited by: Raguraman C on Jan 3, 2009 5:27 PM

How to Use Solution Manager to collect Status Reports from Consultants

Hi,
I am planning to use Solution Manager for collecting the weekly status reports from my consultants and maintain it as a repository . Please let me know the best way of doing this in SOLMAN. There should be mailing options too.
BR,
Raj

Hi Rajasan,
to be able to meet this requirement, you need to set up plan working load in admin tab for your resource, they need to update actual data based on the work completion, you will get status of work,
if you require email, you need to set-up scot, then develop a program with execution scheduling
please check and revert
Anil

Project Management using Solution Manager

Hi,
We are trying to use solution Manager for managing our IT projects - specifically for SAP projects.
We browsed through the existing functionalities that are available and are not able to get info on the following:
___Project Admin tab for Roadmaps :_ __ In the transaction RMMAIN, we are able to define the scope of the activities at each phase and assign team members and track the status of the activity / task.
However we do not have the tab for tracking the planned start date / end date and the actual start / end dates. Similar is the case for efforts.
So not sure how to track these?
Integration of Roadmaps and Blueprints : Once we have defined the project and assigned the Roadmap, we have all the activities that need to be tracked. In addition in transaction SOLAR01 / SOLAR02, we can define the scope and configurations which in itself are a kind of sub projects to be embedded withing the Blueprint and realization phases respectively of the main Projetc Plan.
How to link these Blueprint specific plan and the realization related plan to the main project plan created out of the Roadmap chosen and to track them as one single project?
Synchronization wih ms project : I see only the option to download the plan as an mpp file. But is there any option to upload mpp as well so that the project can be tracked using mpp and synchronized with Solution manager at frequent intervals?
Your answers would definitely be helping us a lot and would be greatly appreciated.
thanks in advance.
regards,
suresh velan

Hi Suresh,
Solution Manager is a Project Management tool. But it is not for Project Planning. If you want to do Project Planning also from the SolMan system, then you have to enable cProjects component of SolMan.
Synchronization between your MS Project and cProjects is possible. But synchronization between SolMan's RoadMap/Blueprint and MS Project is not possible.
In RoadMap, you can capture and track the status of all phase-wise activities as to what is their status. Here capturing date details is not possible.
In Blueprint/Configuration you can capture and keep track of the individual object's blueprinting and configuration activities. Here you can capture the planned/actual start/end dates for each object.
As I said earlier, Solution Manager provides lot of Project Management features, but Project Planning is not possible. For that we have to start using cProjects component in SolMan.
Hope it helps.
best regds,
Alagammai.

How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

Is it a must to use Solution manager for ECC 6.0 upgrade

Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

Hi,
I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4.
I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
Any docs out there for this?
Thanks!
I figured it out... i had to add the R/3 Enterprise logical components to my system landscape. After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
Never mind!
Edited by: Tom Janes on Sep 9, 2009 12:52 AM

How to execute eCATT's from Solution Manager

Hey Everyone,
am using solution manager version 3.1,WAS 620.
and eCATT SAPGUI 640.all my recording are done with SAPGUI recording in Development System.and i execute via TestPlan STWB_2.
Now,my question is,How to execute all these eCATT scripts from Solution Manager.Do i need to transport the whole repository of eCATT from development system to Solution Manager?.
I appreciate if you guys pass some comments on this issue.
Thanks in Advance,
sarapu

Do i need to give target system to development system from solution manager?
can i give the same system data container in solution manager while creating testplan..
in prior do i need to create a testcatalog STWB_1 in order to create TestPlan?
please pass your comments,
Thanks,
sarapu

How to check the messages in solution manager?

hai experts !
how to check the messages in solution manager?
in which transaction do we see them?

Hi Kiran,
From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
For more specific answers, please provide more description of what you are looking for.
Trust this helps.
Regards,
Srini

Unable to create new query using query manager

Hi friends,
I have been trying to create a query using query manager for couple of hours but still not able to.I am following the instructions given in oracle Peopletools 8.52 : Peoplesoft query
Chapter - creating new queries.
Below are the steps I am going through to create new query:
Step - I open the component Reporting Tools-> Query->Query Manager , I don't get the tabbed pages one for search an existing query and another for create new query.
Please follow this link to see how the page is displayed in first step:
http://uploadpic.org/v.php?img=EvMvVAXX1E
Step 2 - When I click on create new query link, I am redirected to a page where it asks for record name to add in the query. But, even this page is not displayed as how it supposed to be
http://uploadpic.org/v.php?img=GzHh3f6krU
Step 3 - Following the above step, when I click on Person record to add into my query I am asked to select the fields that I want to display in the output.
But I somehow do not get the proper tabbed pages where individual pages are there to add the attributes to complete the query like adding multiple records, fields, query, expressions, prompt...etc
http://uploadpic.org/v.php?img=Wbbla3Q3jE
I am neither able to select multiple records in my query nor able to customize my query to get the desired results.
Below is the query that I want to create using query manager:
SELECT P.EMPLID,P.BIRTHDATE, N.NAME, A.ADDRESS1, A.ADDRESS2, A.CITY
FROM PS_PERSON P, PS_NAMES N, PS_ADDRESSES A
WHERE P.EMPLID = N.EMPLID AND
N.EMPLID = A.EMPLID AND
P.BIRTHDATE BETWEEN to_date('1990/1/1','yyyy/mm/dd') and to_date('1991/1/1','yyyy/mm/dd');

Hi,
As I cannot access your screenshot by the blocking of company firewall rules.
I'm guessing currently you are using PT 8.52.00 version, correct?
This should be a bug, that you need to apply the 8.52.0X patch, not sure which patch fix this, you can apply the latest one to solve this issue for no tab page of query manager. (PT 8.52.06)
Hope this helps.
Thanks,
Saxon SI

How to create Handling Unit using Process Order no. & Packing Instruction

Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh

Hi experts,
Please guide me how to create Handling Unit using Process Order number & Packing Instruction reference?Noramlly this is done using standard transaction 'COWBPACK'.
ANY FUNCTION MODULE OR BAPI TO DO THIS.
if any solution please explain with proper example..
Thanks In advance
Thanks,
Yogesh

How to create a "blueprint" using solution manager?!!

Similar Messages

Maybe you are looking for