How to create a bookmark in a table, a header, a footer?
I don't understand why the procedure (within the Pages '09 Help:
Linking to Other Pages in a Document) to create a bookmark doesn't work as documented
within a table, within a header, within a footer.
Where is the secret trick?
With great expectations from one of the best software editor.
dan
Thank you Jerry for your reply
confirming that I'm not a dummy unable to read a documentation.
The secret is that there is a missing function and a missing documentation about it.
A documentation is the wrong place to hide information.
I took advantage of this silly waste of time to make a similar request to feedback. If you feel like me that there is here a missing function, just copy my original message and
paste it there: http://www.apple.com/feedback/pages.html
Best regards.
dan
Similar Messages
-
How to create an arrow in a table
How to create an arrow in a table in numbers.
If you have plus or minus numbers, I want to know a green arrow on the increase is positively or a red arrow if it is negative numberMaybe something like this?
-
How to create t-code for a table and how to create transaction variant???
Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1. how to create transaction code to a table. Can any one give me the
staps??
2. how to create transaction variant for the above requirement???
Thanks & Regards,
SarkarHi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful -
How to create screen resolution in bdc table control
hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks®ards
mark.Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
p_doctyp like RF05A-BUSCS,
p_invdat like INVFO-BLDAT,
p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
l_subrc type sysubrc.
DATA : l_mstring(150).
data accnt type char17.
data : day type char2,
month type char2,
year type char4,
date1 type char10,
date2 type char10.
data : cnt(2) TYPE n,
cnt1 type i,
fld(25) TYPE c.
data : begin of excel occurs 0,
fieldname(255) type c,
end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
lms(200),
msgv1(50),
END OF it_mess.
data: begin of t_record occurs 0,
BUKRS(004),
ACCNT(017),
XBLNR(016),
WRBTR1(016),
WAERS(005),
SECCO(004) ,
SGTXT(050),
HKONT(010),
WRBTR2(017),
MWSKZ(002),
GSBER(004),
KOSTL(010),
end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
BUKRS(004), "Company Code
ACCNT(017), "Account or Vendor
XBLNR(016), "Reference
WRBTR1(017), "Amount in document currency
WAERS(005), "Currency
SECCO(004), "Section Code
SGTXT(050), "Text
END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
ACCNT(017), "Account
HKONT(010), "GL Account
WRBTR2(017), "Line item Amount in document currency
MWSKZ(002), "Tax Code
GSBER(004), " Business Area
KOSTL(010), "Cost centre
END OF t_item.
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPLACHD' '1000'.
perform bdc_field using 'BDC_OKCODE' '=ENTR'.
perform bdc_field using 'BKPF-BUKRS' t_head-bukrs.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'RF05A-BUSCS' p_doctyp.
perform bdc_field using 'INVFO-ACCNT' t_head-accnt.
perform bdc_field using 'INVFO-BLDAT' date1.
perform bdc_field using 'INVFO-BUDAT' date2.
perform bdc_field using 'INVFO-XBLNR' t_head-xblnr.
perform bdc_field using 'INVFO-WRBTR' t_head-wrbtr1.
perform bdc_field using 'INVFO-WAERS' t_head-waers.
perform bdc_field using 'INVFO-SECCO' t_head-secco.
perform bdc_field using 'INVFO-SGTXT' t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field using fld 'X'.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '=0005'.
endif.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE' '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field using fld t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using fld t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field using fld t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field using fld t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field using fld t_item-kostl.
perform bdc_field using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field using fld 'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro using 'SAPMF05A' '1100'.
*perform bdc_field using 'BDC_OKCODE' '=0005'.
**perform bdc_field using 'BDC_OKCODE' '=0006'.
*endif.
endloop.
perform bdc_dynpro using 'SAPMF05A' '1100'.
perform bdc_field using 'BDC_OKCODE'
'=BS'.
perform bdc_dynpro using 'SAPMSSY0' '0120'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = p_file1
FILETYPE = 'DAT'
TABLES
DATA_TAB = t_record.
ENDFORM. " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'p_file1'
IMPORTING
file_name = p_file1.
ENDFORM. " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
ON CHANGE OF t_record-accnt.
MOVE-CORRESPONDING t_record TO t_head.
APPEND t_head.
ENDON.
loop at t_head.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-hkont.
t_item-wrbtr2 = t_record-wrbtr2 .
t_item-mwskz = t_record-mwskz .
t_item-gsber = t_record-gsber .
t_item-kostl = t_record-kostl.
APPEND t_item.
endloop.
If t_record-level = 'H'.
t_head-bukrs = t_record-text1.
t_head-accnt = t_record-text2.
t_head-xblnr = t_record-text3.
t_head-wrbtr1 = t_record-text4.
t_head-waers = t_record-text5.
t_head-secco = t_record-text6.
t_head-sgtxt = t_record-text7.
APPEND t_head.
else.
t_item-accnt = t_head-accnt.
t_item-hkont = t_record-text1.
t_item-wrbtr2 = t_record-text2.
t_item-mwskz = t_record-text3.
t_item-gsber = t_record-text4.
t_item-kostl = t_record-text5.
APPEND t_item.
endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
IF IT_BDC_MESSAGES-msgtyp = 'E'.
SELECT single * FROM t100 WHERE
sprsl = it_BDC_MESSAGES-msgspra
AND arbgb = IT_BDC_MESSAGES-msgid
AND msgnr = IT_BDC_MESSAGES-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ELSE.
it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
it_mess-lms = l_mstring.
it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
APPEND it_mess.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
EXPORTING
file_name = 'c:/Error.xls'
TABLES
data_tab = it_mess
fieldnames = excel
EXCEPTIONS
file_not_exist = 1
filename_expected = 2
communication_error = 3
ole_object_method_error = 4
ole_object_property_error = 5
invalid_filename = 6
invalid_pivot_fields = 7
download_problem = 8
others = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM -
How to create dependent LOV in Advanced Table.
Hi,
How to create dependent LOV in Advanced Table. Pls help send me the steps.
Thanks in Advance,
Hanimi....Hi,
Not sure whether you need dependent LOV or dependent poplist. But anyways, you can refer the below link for Dependent LOV
http://oraclearea51.com/component/content/article/98-oa-framework/372-dependent-lov-in-oaf.html
and for Dependent Poplist refer the below link:
http://oraclearea51.com/component/content/article/98-oa-framework/370-dependent-poplist-in-an-advanced-table-in-oaf.html
Regards,
Sudhakar Mani
http://oraclearea51.com/sudhakarmani -
How to remove the bookmark from the table of contents?
Hi everyone, I have a question:
How to remove the bookmark from the table of contents in Captivate 6?
Regards...Doug, your frustration is making you "bug" gun trigger happy. LOL
LOL, I suppose I have.
I believe the answer you are looking for is in the publishing preferences: under LMS advanced settings, look for the option: never send resume data.
[can someone please confirm this - I am not at a desktop now]
Anyhow, selecting this option will stop resume data - so the lesson will treat even returning learners as new. Hopefully, this will work for you.
This works! Thank you again!
*but* Why isn't Captivate asking the learner to make the choice of whether to start over or resume. It does this correctly if the lesson is published stand-alone.
Thanks again! -
How to create IDOC for customer defined table
hi,
How to create IDOC for customer defined table Records and how to send this IDOC to target system.
what message type will be used and on receiving system how to post these records.
thankx.
pillac.Hi,
You need to create a custom message type and custom IDOC type for this with whatever fields you want send. You need to create segments (WE30), IDOC type (WE30), Message types (WE81) and assign the message type to the IDOC type (WE82).
You will have trigger the IDOC using a Report or something after doing the partner profile settings.
Similary in the target system also, you will have do all the settings.
Take a look the links to find out what settings needs to be done.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
Regards,
Ravi
Note : Please mark the helpful answers and close the thread if the issue is resolved. -
How to create a partition on existing table?
Hey
Could some one please tell me on how to create a partition on existing table?Could some one please tell me on how to create a partition on existing table?
You can't - that isn't possible. Unless a table is already partitioned you can NOT create another partition on it.
You must either redefine the table as a partitioned table (using the DBMS_REDEFINITION package) or create a new partitioned table and move the data to its new partitions.
The choice will depend on how much data the existing table has and whether you can do it offline. -
Layout Pattern: Table with Header Left, Footer Right with JSFF?
Details are in another forum, but was unsure if it was the correct forum to post to.
You can find the post here:
Layout Pattern: Table with Header Left, Footer Right with JSFF?The moral of the story is to set your <af:showDetailItem>'s stretchChildren attribute to "first".
<af:showDetailItem id="sdi5" text="Architecture"
stretchChildren="first">The End. -
[ADF Help] How to create a view for multiple tables
Hi,
I am using Jdeveloper 11G and ADF framework, and trying to create a view to update multiple tables.
ex:
Table A has these fields: ID, Name
Table B has these fields: ID, Address
A.ID and B.ID are primary keys.
B.ID has FK relationship with A.ID
(basically, these tables have one-to-one relation)
I want to create a view object, which contains these fields: B.ID (or A.ID), A.Name, B.Address.
So I can execute C,R,U,D for both tables.
I create these tables in DB, and create entity objects for these tables.
So there are 2 entity objects and 1 association.
Then I create a view object based on B and add fields of A into the view:
If the association is not a "Composition Association",
when I run the model ("Oracle Business Component Browser") and try to insert new data, fields of A can't edit.
If the association is a "Composition Association", and click the insert button, I will get
"oracle.jbo.InvalidOwnerException: JBO-25030: Failed to find or invalidate owning entity"
If I create a view object based on A and add filed of B into the view:
When I run the model and try to insert new data, fields of B can't edit, no matter the association is or is not a composition association.
So... how can I create a view for multiple tables correctly?
Thanks for any advices!
Here are some pictures about my problem, if there is any unclear point, please let me know.
http://leonjava.blogspot.com/2009_10_01_archive.html
(A is Prod, B is CpuSocket)
Edited by: user8093176 on Oct 25, 2009 12:29 AMHi Branislav,
Thanks, but the result is same ....
In the step 2 of creating view object, I can select entity objects to be added in to the view.
If I select A first, and then select B (the "Source Usage" of B is A), then finishing the wizards.
When I try to create a new record in the view, I can't edit any properties of B (those files are disabled).
If I select B first, and then select A in crating view object, the result is similar ...
Thanks for any further suggestion.
Leon -
How to CREATE VIEW to merge two tables each of which has CLOB-typed column
I failed in creating a view to merge two tables that have CLOB-type column each.
The details are:
Database: Oracle 9i (9.2.0)
Two tables "test" and "test_bak", each of which has the following structure:
ID Number(10, 0)
DUMMY VARCHAR2(20)
DUMMYCLOB CLOB
The following operation fails:
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test
union
select id, dummy, dummyclob from test_bak;
I was announced:
select test.id, test.dummy, test.dummyclob
ERROR in line 2:
ORA-00932: inconsistent data type: required - , but CLOB presented.
But if creating views from only ONE table with CLOB-type columns, or from two tables WITHOUT CLOB-typed columns, the creation will succeed. The following 1) and 2) will succeed, both:
1) one table, with CLOB-typed column
create view dummyview (id, dummy, dummyclob) as
select id, dummy, dummyclob from test;
2) two tables, without CLOB-typed columns
create view dummyview (id, dummy) as
select id, dummy from test
union
select id, dummy from test_bak;
I want to merge the two tables all, with complete columns, how to write the CREATE VIEW SQL statement?
many thanks in advanceDong Wenyu,
No.
But you could do this:
SELECT source.*, nvl (tab1.clob_column, tab2.clob_column)
FROM your_table1 tab1, your_table2 tab2, (
SELECT primary_key, ...
FROM your_table1
UNION
SELECT primary_key, ...
FROM your_table2
) source
WHERE source.primary_key = tab1.id (+)
AND source.primary_key = tab2.id (+)
In other words, do the set operation (UNION (ALL)/INTERSECT/MINUS) on just the PK columns before pulling in the LOB columns.
d. -
How to create xml file from relational tables in 10gR2
Hi,
I am very new to XML and was wondering how to create an XML file from querying relational tables. Some child tables may contain multiple rows that need to be returned in certain instances. Other queries will just be single or multiple rows from one or more tables. I would like to use the latest feathers in 10gR2. Thanks for any help you can provide.
Thanks,
LeeHere is the first row of data created from our person table - it used the column names as the tag names:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<MP_ID_SEQ>289</MP_ID_SEQ>
<MP_NAME>LOBERG,JUDITH LEE</MP_NAME>
<MP_SEX>F</MP_SEX>
<MP_RACE>I</MP_RACE>
<MP_DOB>19500709</MP_DOB>
<MP_HT>504</MP_HT>
<MP_WT>170</MP_WT>
<MP_EYE_CLR>BLU</MP_EYE_CLR>
<MP_HAIR_CLR>BRO</MP_HAIR_CLR>
<MP_SKN>RUD</MP_SKN>
<MP_SMT>POCKMARKS</MP_SMT>
<MP_SOC>517607968</MP_SOC>
<MP_OLN>517607968</MP_OLN>
<MP_OLS>MT</MP_OLS>
<MP_OLY>2007</MP_OLY>
<MP_CAUT_MED>70</MP_CAUT_MED>
<MP_VISION_SCRIPT>C0RRECTIVE LENSES</MP_VISION_SCRIPT>
<MP_DNA_AVAIL>N</MP_DNA_AVAIL>
<CREATED_BY>MMPS</CREATED_BY>
<DTM_CREATED>31-AUG-06</DTM_CREATED>
<MI_INC_ID_SEQ>288</MI_INC_ID_SEQ>
<MP_ALERT>N</MP_ALERT>
</ROW> -
How to create a attribute for a table
I am created a table with four columns.
How to create a attribute for each column.........Hi Cranjith Kumar,
First Create a node for ur table.In that give your table name in the dictionary structure then select option add attributes from the structure that will display the fields there u can select the fields then automatically attributes for ur table will be created in the context.
Reward points if useful.
Edited by: srilalitha yerramsetti on Jun 18, 2008 3:23 PM -
How to create the Dynamic UI element table in web dynpro in abap
Hi All,
Does anybody have reference note or teach me how to create dynamic UI element table in web dynpro in abap ?
Regards,
LukeHI LukeWong ,
for creating any UI dynamically you shoul use their runtime class that always start with cl_wd_* ui element name*
so for the Table UI element the runtime class is CL_WD_TABLE
now reffer the below code for creating the Table UI dynamically
METHOD wddomodifyview.
DATA lr_table TYPE REF TO cl_wd_table.
DATA lr_flow_data TYPE REF TO cl_wd_flow_data.
DATA lr_container TYPE REF TO cl_wd_uielement_container.
DATA lr_column_name TYPE REF TO cl_wd_table_column.
DATA lr_text_view TYPE REF TO cl_wd_text_view.
DATA lr_table_header TYPE REF TO cl_wd_caption.
DATA lr_column_name_header TYPE REF TO cl_wd_caption.
IF first_time EQ abap_true.
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_table = cl_wd_table=>new_table(
id = 'TBL_TABLE'
bind_data_source = 'TABLE'
design = cl_wd_table=>e_design-alternating
visible_row_count = 3
lr_flow_data = cl_wd_flow_data=>new_flow_data( element =
lr_table ).
lr_container->add_child( lr_table ).
lr_column_name = cl_wd_table_column=>new_table_column(
id = 'TBL_EXAMPLE_NAME'
lr_table_header ?= cl_wd_caption=>new_caption( text = 'Table UI elem
ent - example').
lr_table->add_column( the_column = lr_column_name ).
lr_table->set_header( lr_table_header ).
lr_text_view = cl_wd_text_view=>new_text_view(
id = 'TXV_NAME'
bind_text = 'TABLE.NAME'
lr_column_name_header ?= cl_wd_caption=>new_caption( text = 'Name').
lr_column_name->set_table_cell_editor( the_table_cell_editor = lr_text_view).
lr_column_name->set_header( lr_column_name_header ).
ENDIF.
ENDMETHOD.
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Sep 17, 2010 12:01 PM -
How to create a Row in a table in SMARTFORMS
Dear All,
I'm working with SAP 4.6C.
I have created a table under the Main Window. After that I have activated the Heade and Footer Check Box in the EVENT TAB of the TABLE. But, Main Area option is not there.
Because of that it is displaying the TABLE Node like
TABLE
Header
Footer
Not Like
TABLE
Header
Main Area
Footer
Under the Header I want to create a row. After creating the row only I can create the cells.
I have defined the line type as %LTYPE1. Even though it is not dispalying the ROW under Header
It should display
TABLE
Header
Row
Cell1
Text1
Cell2
Text2
Main Area
Footer
But, it is not displaying the ROW after creating the line type .
How to overcome this problem...
<<Text removed by moderator>>
Regards,
Bhaskar
Edited by: Matt on Feb 28, 2009 7:02 PM - Please do not offer rewards or pointsHello,
u have posted this question 2 times
When you work on a table node in your form, the node is marked with the table icon . In the
maintenance frame, you get a new type of tab, the Table tab. See below.
On this tab, you can define the table characteristics, and turn on the Table Painter to help lay out
the rows and columns. Turn on the Table Painter by choosing-> Table Painter.
May this link helps u
http://www.scribd.com/doc/7375795/Smart-Form
Thank u,
santhosh
Maybe you are looking for
-
Passing multiple values to a single input parameter
Hi folks, I have a Microstrategy query successfully passing input parameter to a calculation view. For example I can pass a movement type to a material movements calculation view input parameter. However if I try to pick more than one movement type
-
Music not showing up on ipod, but memory is used up
i have a 4G nano, and when i plug it into itunes it shows that there isn't any music on my ipod, but it reads that all the memory is used up. do i need to reset or restore to original settings?
-
Data Link Properties wizard doesn't display correctly.
Hi, This is Dai. I'm using Oracle DB. When I try to create configuration of Identity Center and to config DB connection, Data Link Properties wizard doesn't display required DB provider. The document of "SAP NetWeaver Identity Management Identity Cen
-
Urgent regarding select option
Hi All, Hi All, i have lfart(delivery type) field on selction screen defiend as select-option.whenever i click on the multiple selection arrow button besides the lfart field then i n that i have selected "=" as values for opyion field of select-optio
-
I added an "Email me" button to my home page and published to .Mac. The resulting hyperlink sends mail to my .Mac address. I'd rather have it send to another address. Thought I'd just edit the "Welcome.html" file (on my Mac) to correct the address th