How to create a box in sap script n footer

Hi,
I am working on a Sap Script in which i have to display a box having the decision of crt profile and i don't know how to display it. It is clear that it is to be displayed in the footer of it and the code for that decision is coming from the program.
plzz provide me guidelines as how to solve this problem.

To draw a box, try this syntax.
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
example:
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.18' MM INTENSITY 100.
/: POSITION XORIGIN '11.21' MM YORIGIN '5.13' MM.
/: SIZE HEIGHT '120' MM WIDTH '90' MM.
Regards,
Joan

Similar Messages

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to create a hypertext in SAP script

Hi All,
I want to create a hypertext in SAP script.I read 'Creating hypertext in SAP script' posted on www.sdn.sap.com, but I am not able to get desired output.Kindly suggest the soloution.
Regards,
Pranjali Silimkar

Hi,
I read the document 'Creating hypertext in SAP script' posted on the link 'http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingHypertextinSAPScripts', but I am not able to get the desired output.It is displaying the same text again on the same page which is not the desired output.Kindly suggest me some solution.
Regards,
Pranjali Silimkar

How to create table in the sap script

Hi,
How to create a table in the sap script layout, i Have to use table in the main window with 7 columns. can any one send sample code.
How to calculate the number of line items which are displaying in the main window, if the number of line items are exceed in the main window then the amount has to be calculate and print as "BALANCE FORWARD" and the next page had to be displayed as "CARRY FORWARD" that amount. if this is the last page not subsequent page the amount had to be calculated the carry forward amount and total amount and print as "TOTAL AMOUNT". i am creating the new layout and the program is the standrad driver program i have to use and i have to use the standard Text elements only, can any one help me on this issue

hi
good
there is no "pattern" option in SAPscript. All you have at your disposal are the following SAPscript commands: BOX, POSITION and SIZE. Not only are these commands both confusing and tedious to implement, they also are limited in what they can achieve. For instance, although you can suppress a box during printout (by making it conditional), there is no simple way to adjust it dynamically instead. Thus, to divide sequential line items, you may wish to use an underline (ULINE) or simply white space.
thanks
mrutyun

Problem in creating small box in sap script

Hi,
I am working on a sap script in which iwant to create a small on the right hand side of the footer of the script and also want to display the data in that box.
plzzz provide me guidelines how to solve this problem.

u can use the BOX command.
The BOX command draws a box as per the specifications. The x , y co-ordinates are for the upper left corner with reference to the values in the position command. The Position command is used to set x,y coordinates with respect to the start position.
plz chk this link:
how to display Lines and Boxes in SAP Script

How can create a table in sap script?

Hi,
How to create a table in the sap script.i Have to use table in the main window with 11 rows and 3 columns. can any one send sample code. Any ideas?¿
THKS 4all.

Try and check on the below logic....
1. write -
2. write headings with '|' at start and end as well as the field separator.
3. write -
4. similar to step two write the data with pipe separators.
5. write -
regards
Anurag

How to create new page in SAP Script?

Moved to correct forum by moderator. Duplicate deleted. Do NOT post the same question in two forums.
Hello friends,
I am modifying one SAP script.
It is already contains 2 pages. FIRST and NEXT.
All I have to do is to create one more page which should be display as last page.
And this last page should display some data.
I tried and created a new page in SE71 but when i execute the program, it doesn't show newly created (LAST) page.
Please guide me.
REgards,
RH
Edited by: Matt on Nov 7, 2008 4:26 PM

Hi
U need to force the call of this new page.
I suppose your sapscript is arrange with 2 page: FIRST and NEXT, where FIRST has NEXT as next page.
So the system automatically print the pages FIRST and NEXT: u need to insert the statament:
/: NEW-PAGE LAST
in the MAIN window.
U can create a text element NEW_PAGE and you'll call it as soon as you've finished to print the main data:
/E NEW_PAGE
/: NEW-PAGE LAST
U can use the fm CONTROL_FORM
Max

How to print check box in sap script

I have a requirement in SAP Script to print a Check bok.
I tried using SAP symbols in the script, but it does not print. It inserts <679> for checkbox & <697> for marked checkbox. Any special command to be passed?
Regards,
Prabhu Rajesh.

Hi,
Are you sure your printer is capable of printing graphics ?
Cheers
Colin.

Create new window in SAP Script

Dear All
   how to create new window in sap script
Regards
Suresh
Edited by: Alvaro Tejada Galindo on Apr 9, 2008 11:58 AM

Hi,
To create a new window in scripts.
1. After opening the form in SE71   Click on Windows push button.
    it will gives a screen list of windows in a page
2. Click on Edit option in menu bar in Edit-->Create Element click it will gives a popup window in the window give Name of the window and short description press enter like that you can create windows in a page
3. Click on Page windows it will gives a screen where that window you want to place in that page.    Click on Edit option on menu bar Edit-->Create Element
it will gives a list of windows which your created in a page   here you have to select which window you want to place. Double click on that window it will adds on the page and give the bottom of the screen you can find standard attributes block
there you have to give the position of the window in a page.
or
Click on setting option on menu bar settings-->form painter
it will gives a GUI editor here you can drag the window position it is easy to use.
then you can see the layout.
Thanks
Ganesh

How to display Lines and Boxes in SAP Script

hi,
Can any one help me how to display Lines and Boxes in SAP Script.
Regards
kiran

The SAP printer drivers based on page-oriented printers use these commands when creating output whereas the line printers and non-supported page-oriented printers ignore these commands.
Syntax:/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
This command draws a box of the specified size at the specified position.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH determines the width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT determines height of the box.
Default: HEIGHT value of the SIZE command.
FRAME determines the thickness of frame.
Default: 0 (no frame).
INTENSITY determines the box contents as a grayscale percentage.
Default: 100 (full black)
The other details I guess is provided by friends who have posted before me.
Regards,
K.Sibi

How to increase size of check box in sap script

Hi All,
I need to include check box in sap script. I included check box using insert>character->sap symbols. I cant able to view check box in print preview but i can able to get check box in print out.Size of check box printed in the paper is not having enough size. I need to increase size of the check box. Give me suggestion for increasing size of check box.
Regards,
Peranandam

Chk the link.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm

How to print last page in sap script in ladscape format?

Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
Pravin

Hi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam

How to print Vertical barcode in SAP script

I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?

1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay.

How to use Standard text in SAP SCRIPTS

Hi all,
Please tell me how can we use the standard text what we have created in SO10 with sap scripts.

Hi Gaurav
You can create standard texts using the transaction SO10. Then to insert these standard texts in the SAPScript choose the menu, Insert->Text->Standard and choose the standard text that you want to choose.
Alternatively, you can display standard texts in your SAP Scripts using the command:
INCLUDE ZSTEXT OBJECT TEXT ID ST LANGUAGE EN
where ZSTEXT refers to the Standard Text name.
Reward pts if found usefull
Regards
Sathish:)

How to create a box in sap script n footer

Similar Messages

Maybe you are looking for