How to create a bridge and use it?

First let me explain what I have- a WRT150N Wireless-N router and a BEFCMU10 cable modem.  If I try to host a online game with the wireless router, no one can see it.  This is due to IP address issues.  Everytime I want to host a online game, I have to take the wireless router down and connect directly to the cable modem, which annoys my roommates. 
Now a tech guy said I could get around this by 'bridging' my ip address.  Then people can see my game online and connect through the wireless router.  Keep in mind I know very little about this stuff.  But I was hoping someone could explain to me how I set up this bridging of my IP address so people can connect to my hosted game online.

you can bridge or map a public ip add to a LAN ip add only in the RV016,RV042 and RV082 router...any other linksys route does not have that feature ..

Similar Messages

  • How to create RFQ s and use them to complete the program

    hi,
    how to create RFQ s and use them to complete the program
    thanks in advance

    Hi Santosh,
    RFQ is created through transaction ME41.
    You need to write down BDC for mass update of RFQ, because BAPI is not available.
    Regards,
    Tutun

  • How to create stored procedures and use those in Crystal reports

    Hi All,
    Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
    Thanks in advance.

    Hello,
    There is a document explainining how to use Oracle stored proc with Crystal reports.
    Check at:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1084c536-711e-2b10-e48a-924a60745253
    It is for older version but it should work and you can refer to it to get general idea how to start with it. It has a sample oracle stored proc and how to connect it from Crystal Reports.

  • How to create @icloud Mail and use it as my Apple ID

    My current appleID is @aol email address I used first for my iPod and iTunes but now I have iPad and iPhones and want to create an @icloud address as primary and also use it as my new appleID instead of the one I use now. Never had any @me, @mac or @icloud before, but I've read switching apple IDs may be tricky. Your advise is very welcome. Thank you.

    You can't change the ID/login address on your Apple ID to your @icloud.com address if you already have one.
    However you can create a new Apple ID and iCloud account using a new @icloud.com address if you follow the procedure outlined here:
    https://discussions.apple.com/message/22283348#22283348
    You can only create an @icloud.com address: new @me.com or @mac.com addresses can no longer be created.
    You would need to keep the existing ID for iTunes as purchases cannot be transferred - there's no problem about having different logins for iTunes and iCloud.

  • How to create new rules and using 'From' condition ?

    All,
    I know, rules are a quota max as 256 ko.
    So, my problem is to move all mail from external writer of my directory.
    I want to create a folder Inbox\external where all mail have to be move on except internal mail.
    So I looked at :
    [-From <RecipientIdParameter[]>] ; [-FromAddressContainsWords <MultiValuedProperty>] and [-ExceptIfFrom <RecipientIdParameter[]>]  but, because of quota limitation, I could add all internal exchange recipients.
    Any idea ?
    Thanks

    Hi,
    If you would like to move the emails from external senders to a specific folder using Inbox rule.
    I’d recommend you create a  Dynamic Distribution Group and name it as
    internalrecipients. Then set it as All recipients in the filter tab. Now it is a group which contains all users and contacts in your organization.
    Next, set the Inbox rule in your client as below:
    Click on the Inbox folder and  new a Rule.
    Apply the rules on messages I receive.
    Send only to me.
    Move to the specified folder (new a folder named external).
    Except if from people or public group (internalrecipients).
    Run the rule now on message already in “Inbox”
    Finish.
    See if it works as you expected.
    Regards,
    Rebecca Tu
    TechNet Community Support

  • How to create a Wallet and use  &  in organization name

    Im trying to create a wallet but my organizacion use & in his name and webcache not allow it
    Any help on this

    sorry the error is not a problem of webcache. The main problem was oracle wallet manager not suport special characters like &
    So oracle sugest use 11g wallet manager and then import on oracle wallet 10g
    Regards

  • How to create a crystal Report using C# and SQL Server

    Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
    but i got an error on the adding of server name and database portion.. thanks a lot in advance

    Hello,
    Crystal Reports are supported on
    http://scn.sap.com/community/crystal-reports.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to create a partner and header record using CRM_ORDER_MAINTAIN?

    Hi any one knows how to create a partner and header record using the function module CRM_ORDER_MAINTAIN??
    I tried to  create a record, but i only managed to create a header record and the partner record is not reflected in the transaction.  Why is that so? is there any indicator that i need to include?
    Thanks..
    Jen

    Hi Jen!
    I use this FM and it works perfectly.
    Use this to create a partner:
      gs_partner-ref_handle    = '0000000001'.
      gs_partner-ref_kind      = 'A'.
      gs_partner-ref_partner_handle = '0001'.
      gs_partner-partner_fct   = '00000001'.
      gs_partner-partner_no    = NO_PARTNER. "number of the partner, bu_partner
      gs_partner-display_type  = 'BP'.
      gs_partner-no_type       = 'BP'.
      gs_partner-kind_of_entry = 'C'.
    *  ls_partner_l-ref_handle    = '1'.
      gs_partner-ref_guid      = '00000000000000000000000000000000'.
      APPEND gs_partner  TO gT_partner .
      ls_input_field-ref_kind  = 'A'.
      ls_input_field-logical_key   = '0001'.
      ls_input_field-objectname  = 'PARTNER'.
      ls_input_field-ref_handle  = '0000000001'.
      ls_input_field_names-fieldname = 'DISPLAY_TYPE'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'KIND_OF_ENTRY'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'NO_TYPE'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'PARTNER_FCT'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'PARTNER_NO'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      INSERT ls_input_field  INTO TABLE  gt_input_fields.
      clear ls_input_field-field_names[].
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
    *    it_schedlin_i   = gt_schedlin_i_com
        it_partner      = gt_partner
    *    it_sales        = gt_sales
    *      it_orgman       = gt_orgman
    *      it_appointment  = gt_appointment
    *      it_ordprp_i     = gt_ordprp_i
    *   it_product_i    = gt_product_i
    *      it_activity_i   = gt_activity_i
    *      it_pridoc       = gt_pridoc_com
      CHANGING
        ct_orderadm_h   = gt_orderadm_h
    *   ct_orderadm_i   = gt_orderadm_i
        ct_input_fields = gt_input_fields.
    *      ct_doc_flow     = gt_doc_flow
    *      cv_log_handle   = gv_log_handle.
    Hope it helps u,
    Regards,
    Mon.

  • How to create process chains,and how to use process like and or xor

    Hi,
    How to create process chains,and how to use process like and or xor.
    can any one please give me a example in each.
    Thanks,
    cheta.

    Hi Cheta,
    Here is step by step procedure to create process chains
    Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
    Creating Process Chains
    Prerequisites
    If you want to include a load process in the process chain, you need to have already created an InfoPackage.
    You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
    Creating Process Chains
    You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
    Creating a Process Chain Directly in the Process Chain Maintenance Screen
    You are in the BW Administrator Workbench.
    1. Click on the Process Chain Maintenance icon in the AWB toolbar.
    The Process Chain Selection dialog window appears.
    2. Choose Create.
    3. Enter the technical name and a description of the chain, and confirm your entry.
    The Add Start Process dialog window appears.
    4. Create a variant for a start process.
    1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
    2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
    The Maintain Start Process screen appears again.
    3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
    You are taken to the Plan View of the process chain maintenance screen.
    In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
    5. Use the drag-and-drop function to add the relevant processes into your process chain.
    You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
    Hope this helps
    Regards
    Karthik

  • How to create snapshot portlet and snapshot query using server API

    How to create snapshot portlet and snapshot query using server API
    Regards
    Dheeraj

    Hi Sebastian,
    I have used the query and it is working fine. but, How could i include the headers of the query also in to the Excel Sheet.
    RehaanKhan. M
    see the method discussed here
    http://sqlblogcasts.com/blogs/madhivanan/archive/2008/10/10/export-to-excel-with-column-names.aspx
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How to create new XML file using retreived XML content by using SAX API?

    hi all,
    * How to create new XML file using retreived XML content by using SAX ?
    * I have tried my level best, but output is coming invalid format, my code is follows,
    XMLFileParser.java class :-
    import java.io.StringReader;
    import java.io.StringWriter;
    import javax.xml.transform.OutputKeys;
    import javax.xml.transform.Transformer;
    import javax.xml.transform.TransformerConfigurationException;
    import javax.xml.transform.TransformerException;
    import javax.xml.transform.TransformerFactory;
    import javax.xml.transform.dom.DOMResult;
    import javax.xml.transform.sax.SAXSource;
    import javax.xml.transform.sax.SAXTransformerFactory;
    import javax.xml.transform.sax.TransformerHandler;
    import javax.xml.transform.stream.StreamResult;
    import org.w3c.dom.Document;
    import org.xml.sax.Attributes;
    import org.xml.sax.InputSource;
    import org.xml.sax.SAXException;
    import org.xml.sax.helpers.XMLFilterImpl;
    public class PdfParser extends XMLFilterImpl {
        private TransformerHandler handler;
        Document meta_data;
        private StringWriter meta_data_text = new StringWriter();
        public void startDocument() throws SAXException {
        void startValidation() throws SAXException {
            StreamResult streamResult = new StreamResult(meta_data_text);
            SAXTransformerFactory factory = (SAXTransformerFactory) SAXTransformerFactory.newInstance();
            try
                handler = factory.newTransformerHandler();
                Transformer transformer = handler.getTransformer();
                transformer.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
                transformer.setOutputProperty(OutputKeys.INDENT, "yes");
                handler.setResult(streamResult);
                handler.startDocument();
            catch (TransformerConfigurationException tce)
                System.out.println("Error during the parse :"+ tce.getMessageAndLocation());
            super.startDocument();
        public void startElement(String namespaceURI, String localName,
                String qualifiedName, Attributes atts) throws SAXException {
            handler.startElement(namespaceURI, localName, qualifiedName, atts);
            super.startElement(namespaceURI, localName, qualifiedName, atts);
        public void characters(char[] text, int start, int length)
                throws SAXException {
            handler.characters(text, start, length);
            super.characters(text, start, length);
        public void endElement(String namespaceURI, String localName,
                String qualifiedName) throws SAXException {
            super.endElement("", localName, qualifiedName);
            handler.endElement("", localName, qualifiedName);
        public void endDocument() throws SAXException {
        void endValidation() throws SAXException {
            handler.endDocument();
            try {
                TransformerFactory transfactory = TransformerFactory.newInstance();
                Transformer trans = transfactory.newTransformer();
                SAXSource sax_source = new SAXSource(new InputSource(new StringReader(meta_data_text.toString())));
                DOMResult dom_result = new DOMResult();
                trans.transform(sax_source, dom_result);
                meta_data = (Document) dom_result.getNode();
                System.out.println(meta_data_text);
            catch (TransformerConfigurationException tce) {
                System.out.println("Error occurs during the parse :"+ tce.getMessageAndLocation());
            catch (TransformerException te) {
                System.out.println("Error in result transformation :"+ te.getMessageAndLocation());
    } CreateXMLFile.java class :-
    Sax.startDocument();
    Sax.startValidation();
    Sax.startElement("", "pdf", "pdf", new AttributesImpl());
    Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());          
    String xmp_str = new String(meta_data.getByteArray(),"UTF8");
    char[] xmp_arr = xmp_str.toCharArray();
    Sax.characters(xmp_arr, 0, xmp_arr.length);
    Sax.endElement("", "pdf", "pdf");
    Sax.endValidation();
    Sax.endDocument();
    Sax.endElement("", "basic-metadata", "basic-metadata");* In CreateXMLFile.java
    class, I have retreived the xml content in the meta_data object, after that i have converted into character array and this will be sends to SAX
    * In this case , the XML file created successfully but the retreived XML content added as an text in between basic-metadata Element, that is, retreived XML content
    is not an XML type text, it just an Normal text Why that ?
    * Please help me what is the problem in my code?
    Cheers,
    JavaImran

    Sax.startDocument();
    Sax.startValidation();
    Sax.startElement("", "pdf", "pdf", new AttributesImpl());
    Sax.startElement("", "basic-metadata", "basic-metadata", new AttributesImpl());          
    String xmp_str = new String(meta_data.getByteArray(),"UTF8");
    char[] xmp_arr = xmp_str.toCharArray();
    Sax.characters(xmp_arr, 0, xmp_arr.length);
    </code><code>Sax.endElement("", "basic-metadata", "basic-metadata");</code>
    <code class="jive-code jive-java">Sax.endElement("", "pdf", "pdf");
    Sax.endValidation();
    Sax.endDocument();     
    * I HAVE CHANGED MY AS PER YOUR SUGGESTION, NOW SAME RESULT HAS COMING.
    * I AM NOT ABLE TO GET THE EXACT OUTPUT.,WHY THAT ?
    Thanks,
    JavaImran{code}

  • How to create the sales order using BAPI's ....?

    Hi Guru's,
    could you please provide how to create the sales order using BAPI's .....i need step by step process and please provide the details from scratch....basically  i don't have basic knowledge on this....please provide required inputs ....:)
    thanks in advance
    Srinivas......

    Hi Guru's thanks for your inouts and your valuble time...
    please find the program logic below...
    *& Report  ZAREPAS30
    REPORT  zarepas30.
    DATA : gs_vbeln                   TYPE  vbak-vbeln,
           gs_order_header_in         TYPE  bapisdhd1,
           gs_order_header_inx        TYPE  bapisdhd1x,
           gt_order_items_in          TYPE  STANDARD TABLE OF bapisditm,
           gwa_itab1                  TYPE  bapisditm,
           gt_order_items_inx         TYPE  STANDARD TABLE OF bapisditmx,
           gwa_itab2                  TYPE  bapisditmx,
           gt_order_partners          TYPE  STANDARD TABLE OF bapiparnr,
           gwa_itab3                  TYPE  bapiparnr,
           gt_return                  TYPE  STANDARD TABLE OF bapiret2,
           gwa_itab4                  TYPE  bapiret2.
    Sales document type
      PARAMETERS: p_auart TYPE auart OBLIGATORY.
    Sales organization
      PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
    Distribution channel
      PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
    Division.
      PARAMETERS: p_spart TYPE spart OBLIGATORY.
    Requested Delivery Date
      PARAMETERS: p_edatu  TYPE edatu OBLIGATORY.
    Sold-to
      PARAMETERS: p_sold  TYPE kunnr OBLIGATORY.
    Ship-to
      PARAMETERS: p_ship  TYPE kunnr OBLIGATORY.
    Material
      PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
    Quantity.
      PARAMETERS: p_menge TYPE kwmeng  OBLIGATORY.
    Plant
      PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
    Start-of-selection.
      START-OF-SELECTION.
    Header data
    Sales document type
      gs_order_header_in-doc_type = p_auart.
      gs_order_header_inx-doc_type = 'X'.
    Sales organization
      gs_order_header_in-sales_org = p_vkorg.
      gs_order_header_inx-sales_org = 'X'.
    Distribution channel
      gs_order_header_in-distr_chan  = p_vtweg.
      gs_order_header_inx-distr_chan = 'X'.
    Division
      gs_order_header_in-division = p_spart.
      gs_order_header_inx-division = 'X'.
    Reguested Delivery Date
      gs_order_header_in-req_date_h = p_edatu.
      gs_order_header_inx-req_date_h = 'X'.
      gs_order_header_inx-updateflag = 'I'.
    Partner data
    Sold to
      gwa_itab3-partn_role = 'AG'.
      gwa_itab3-partn_numb = p_sold.
      APPEND gwa_itab3 TO  gt_order_partners .
    ship to
      gwa_itab3-partn_role = 'WE'.
      gwa_itab3-partn_numb = p_ship.
      APPEND gwa_itab3 TO  gt_order_partners .
    ITEM DATA
      gwa_itab2-updateflag = 'I'.
    Line item number.
      gwa_itab1-itm_number = '000010'.
      gwa_itab2-itm_number = 'X'.
    Material
      gwa_itab1-material = p_matnr.
      gwa_itab2-material = 'X'.
    Plant
      gwa_itab1-plant    = p_plant.
      gwa_itab2-plant   = 'X'.
    Quantity
      gwa_itab1-target_qty = p_menge.
      gwa_itab2-target_qty = 'X'.
      APPEND gwa_itab1 TO gt_order_items_in.
      APPEND gwa_itab2 TO gt_order_items_inx.
    Line item number.
      gwa_itab1-itm_number = '000020'.
      gwa_itab2-itm_number = 'X'.
    Material
      gwa_itab1-material = p_matnr.
      gwa_itab2-material = 'X'.
    Plant
      gwa_itab1-plant    = p_plant.
      gwa_itab2-plant   = 'X'.
    Quantity
      gwa_itab1-target_qty = p_menge.
      gwa_itab2-target_qty = 'X'.
      APPEND gwa_itab1 TO gt_order_items_in.
      APPEND gwa_itab2 TO gt_order_items_inx.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
      EXPORTING
        order_header_in               = gs_order_header_in
        ORDER_HEADER_INX              = gs_order_header_inx
      IMPORTING
        SALESDOCUMENT                 = gs_vbeln
      tables
        RETURN                        = gt_return
        ORDER_ITEMS_IN                = gt_order_items_in
        ORDER_ITEMS_INX               = gt_order_items_inx
        order_partners                = gt_order_partners.
    Check the return table.
      LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      IF sy-subrc = 0.
        WRITE: / 'Error occured while creating sales order '.
      ELSE.
    Commit the work.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE: / 'Document ', gs_vbeln, ' created'.
      ENDIF.

  • How to create custom report plugin using child region report metadata

    Hi,
    I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
    Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
    metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
    render according to the child report attribute.
    Is there anybody here had ever done this?

    Hi Nicolette,
    Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
    Start from determining column heading, column order until finish rendering the report. The same way how apex
    render the classic report.
    Previously this imy my rendering process:
    FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                         P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                         P_VALUE  IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
        VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
        VCOLCOUNT       NUMBER;
        VCOLNAMES       VARCHAR2(2000);
        VAJAXIDENTIFIER VARCHAR2(100);
        VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
        VJSCODE         VARCHAR2(32767);
      BEGIN
        VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT  => 'select * from s_emp',
                                                        P_MIN_COLUMNS    => 1,
                                                        P_MAX_COLUMNS    => 999,
                                                        P_COMPONENT_NAME => P_REGION.ID);
        VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
        FOR I IN 1 .. VCOLCOUNT LOOP
          VCOLNAMES := VCOLNAMES || '{name: "' ||
                       UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
        END LOOP;
        APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
        RETURN VSQLHANDLER.COLUMN_LIST;
      EXCEPTION
        WHEN OTHERS THEN
          APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
          RAISE;
      END GETCOLUMN;
    So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
    i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
    on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
    the normal apex rendering process but this is what i want to achieve.
    I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
    same columns alias, column ordering and column  conditional display.
    Thanks,
    akulala

  • How to create a single report using 5 difftent reports

    Hi Experts
    how to create a single report using 5 repors in it.
    Example
    I have to create a Survey history report using
    Reports like Surevy 1
                      Surevy 2
                      Surevy 3
                      Surevy 4
                      Surevy 5
    Please suggest me.
    Santosh

    Use Analysis Process Designer (RSANWB) to feed each of the survey BEX reports to one DSO.  Assuming each of the surveys has something in common to compare.  Could also be used as a snapshot storage for the surveys in case history needs to be compared/archived. 
    Build the Direct update DSO with the survey objects.  Add needed time characteristics and/or version control objects to the key. 
    Data sources  will be the 5 surveys. 
    Add formula to hardcode version/time for history.
    Data target is the direct update DSO.
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/49/7e960481916448b20134d471d36a6b/frameset.htm
    -SM

  • How to create a table to use in webdynpro ABAP

    Hi Guys,
    Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer.  Thanks In Advance
    Regards
    Ravi

    Hi! You can use transaction code SE11.  Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
    Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
    Please reward points if helpful

Maybe you are looking for