How to create a bridge between the two given GB Ethernet ports.

Hi,
I have a MAC Pro in my test set up. is there any way to create a bridge in between the two given Gigabyte ports and control the bandwidth for the device connected to Ethernet-2 while getting the internet connection from Ethernet-1.

I believe you can manually set the bit rate for the second Ethernet port when it is operating as Ethernet Sharing (essentially turning that port into a limited Router).
There are no standard tools in Mac OS X for inspecting the packets there, but there may be tools available for networking developers/troubleshooters to do that.
When that feature is enabled, the port appears from your Mac to have a "self-assigned" IP Address -- a semi random Address in the 169.254.xxx.yyy range. From the connected devices, it will appear to have a legitimate private Router Address, often 192.168.1.1

Similar Messages

  • How to add a line between the two text fields  in JTabbed Pane

    Hi Friends,
    I would like to add a Line between some text fields to seperate them.. I added those text Fields to a tabbed Pane.. Please help me to create a line between the TextFields......

    http://java.sun.com/docs/books/tutorial/uiswing/components/separator.html

  • How to find outthe difference between the two serivce patch of Netweaver04s

    Hi,
    We have installed NetWeaver04s with sp13 patch. We want to upgrade this to latest patch avaiable on sap market place. I could see sp22 is the latest patch. I know all the procedure to download the patch. But before downloading I have to find out the difference between the latest patch available i.e. SP22 and the current patch installed i.e. SP13.
    Could anybody guide me how to see the difference between any two patches avaiable on the SAP market place?
    Let me know if you need more information on this.
    --Chandan

    Hi
    For single patch info, if you click the INFO link in window from where you download the patch. You will get the information related to that patch.
    eg
    SAPJEE05_0-10003469.SCA SP05 for SAP J2EE Engine 7.00  0 Info 53976 14.12.2005
    Try out this, can help you (some navigation required)
    http://service.sap.com/sp-stack
    Select your Product:
    Select Source and Target Release and Componenets. Click Next
    Navigate under "Additional Information"
    eg:
    SAP NetWeaver 7.0 (2004s) Support Package Stacks
    can be found on the SAP NetWeaver 7.0 (2004s) Support Package Stacks Info-Pages for each available Support Package Stack
    In the next window; again navigate further: you can find like this
    New functionality available with the relevant SP Stack is described in Section "Release Notes" as part of the SAP Library. Please refer to SAP Help Portal -> SAP NetWeaver 7.0 -> Release Notes. Each scenario folder contains the new functionality available for each SP Stack.
    eg.
    http://help.sap.com/saphelp_nw04s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
    This would give you information of changes in different releases.

  • HT1495 Already have 2 accounts on my non apple computer how do I share music between the two?

    My friend and I both have iTune accounts but want to share the music WE bought off of iTunes. What's the easiest way to do this on a PC?

    To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
    If you want to give full read/write access to more than one user, see the support article linked below.
    iTunes: How to share music between different accounts on a single computer
    There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

  • How to create a query using the requirements given ? step by step  plz

    REQUIREMENTS
    1)     Model- Use multiprovider ZXT_MXXX as infoproviders
    2)     Query- copy ‘ZXT_MXXX_QYYY’ as head start
    <b>b.     Fields for output</b>
    1.     Hourly Rate-- I know its dataflow .It comes from infotype IT yyyy
    Program name MPyyyy00 and query name QXXXX-XXXX
    So can I Get this feild to Query Designer
    2.     CC /WBS/IO on ITyyyy--?
    I know dataflow .they come from infotype IT yyyy
    Program name MPyyyy00 and  3 different fields.
    So how can I Get cc/wbs to Query Designer?
    Can anyone suggests steps to do it plz..

    Check the<b> ZXT_MXXX</b>  multiproivder is based on what all infoproviders..
    Check in your infoproviders..for this <b>CC /WBS/IO</b>field..
    If it is avialable in the underlying infoproviders, it should be available for your reporting on multiprovider..
    Regards
    Manga

  • I have purchased a new iPad and given my old one to my husband.  How do I change the Apple ID over to him.  We are having continuous confusion between the two iPads

    I have purchased a new iPad and given my old one to my husband.  How do I change the Apple ID over to him.  We are having continuous confusion between the two iPads

    Hi Marg42,
    Thanks for visiting Apple Support Communities.
    First, your husband can create his own Apple ID via the web, computer, or iPad, if he hasn't already:
    My Apple ID
    https://appleid.apple.com
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/ht2731
    Next, he can sign out of the Apple services that are currently using your Apple ID on your old iPad, and sign in with his own.
    This article has instructions for doing so for specific Apple services:
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796
    Alternately, he can erase the device and set it up as new using the steps in this article:
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/ht4137
    Best Regards,
    Jeremy

  • I've set up two music libraries.  How do I move between the two?

    I've created two music libraries on my MacBook but I don't know how to move between the two.  Please help?

    Judygirl48 wrote:
    I've created two music libraries on my MacBook
    Why?
    If you are syncing separate iDevices, you can use the same library and sync different content
    I don't know how to move between the two.  Please help?
    Same way you created two library.
    Hold Option. laucn iTunes but instead of selecting Create library..., select Choose library...

  • My daughter and I both have an iPhone and we have shared my apple ID. Now her phone is syncing with mine and we want to have different contacts. How do I differentiate between the two phones?

    My daugher and I both have an iPhone and we have shared my apple ID. She just replaced her phone and now our contacts are syncing -- and we don't want that. How do I differentiate between the two phones?

    Is the same Apple iCloud account being accessed on each iPhone?

  • My IPhone has a different ICloud Apple ID than my iPad. How can I stream between the two devices

    My iPhone has a different id than my iPad. How can I stream between the two devices

    I should say that you can add the other account to each device as a seconday account by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud and signing in with the ID the other device is using.  This would allow you to see mail, contacts, calendars, reminders and notes from the other account alongside the same data from the primary account on each device.

  • When in Windows 7 (using bootcamp obviously) I am able to see my files in my Mac partition. When I try to access them I am told that I need permission from the administrator. How do I give myself permission to access files between the two partitions?

    When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

    When in Windows 7 (while using bootcamp) I am able to see my personal files in my Mac partition. When I try to access them I am denied access, it tells me that I need permission from the administrator. How do I give myself permission to access files between the two partitions, Mac/Windows7?

  • How do I transfer iTunes music from iPad to nano without a computer ? Can I lighting plug between the two?

    How can I transfer iTunes music from iPad to Nano without the use of a computer? Can it be done with Lightning plugs between the two?

    There is no way to do that.

  • I have one iPhone GS and one iPad 2, how do I syncronise my contacts and my calendar between the two devices?

    I  have one iPhone GS and one iPad 2, how do I syncronise my contacts and my calendar between the two devices?

    Install iOS 5 onto both and you can use iCloud to sync contacts and calendars between the 2 devices.

  • HT203167 I was trying to create a playlist to add to a second ipod I have and save my library of my other ipod and hopefully transfer between the two or organize additional playlist between the two.  What I did was erase both and and back at point zero. l

    I was trying to create a playlist to add to a second ipod I have and save my library of my other ipod and hopefully transfer between the two or organize additional playlist between the two.  What I did was erase both and and back at point zero. lost everything.  Tried to follow directions but I'm too stupid. Used the 'New play list" wrong i think and I know where original files are but no directions as to get it back.  Its supposed to be a simple function of ipod bet not so!

    An iTunes playlist can only contain songs that are in the same iTunes library as the playlist.  There is neither a manual nor a scripted way to create an iTunes playlist that contains songs that are not in the library.  
    So, to do what you want, you would need to create a single consolidated library with all the music, and then create playlists off of that.  Since your current drive is "chock a block full," the best way to do this will be to spend $50-$100 and get an external hard drive for iTunes.

  • How to create radio button between two slection screen

    hello all.
    could you please guide me how to create radio button between two SELECTION-SCREEN  in screen painter.
    Thank you,
    srinivas

    hi
    SEE THIS CODE
    REPORT  ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
    ******DATA DECLARATIONS**********
    DATA : BEGIN OF IT_PLANT OCCURS 0,
            MATNR LIKE MARA-MATNR,
            WERKS LIKE MARC-WERKS,
            PSTAT LIKE MARC-PSTAT,
            EKGRP LIKE MARC-EKGRP,
           END OF IT_PLANT.
    DATA : BEGIN OF IT_PONO OCCURS 0,
            EBELN LIKE EKKO-EBELN,
            EBELP LIKE EKPO-EBELP,
            MATNR LIKE EKPO-MATNR,
            WERKS LIKE EKPO-WERKS,
            LGORT LIKE EKPO-LGORT,
           END OF IT_PONO.
    TABLES EKKO.
    ********END OF DATA DECLARATIONS*********
    ********SELECTION SCREEN DESIGN ***********
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
    SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
    SELECTION-SCREEN END OF BLOCK B1.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R4 RADIOBUTTON GROUP G2.
    SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS : R2 RADIOBUTTON GROUP G1.
    SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B2.
    ******END OF SELECTION SCREEN DESIGN****************
    <b>rEWARD IF USEFULL</b>

  • How to sync the data between the two iSCSI target server

    Hi experts:
    I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
    any body help me?
    Thanks

    Hi experts:
    I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
    any body help me?
    Thanks
    There are basically three ways to go:
    1) Get compatible software. Microsoft iSCSI target cannot do what you want out-of-box but good news third-party software (there are even free versions with a set of limitations) can do what you want. See:
    StarWind Virtual SAN [VSAN]
    http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
    DataCore SANxxx
    http://datacore.com/products/SANsymphony-V.aspx
    SteelEye DataKeeper
    http://us.sios.com/what-we-do/windows/
    All of them do basically the same: mirror set of LUs between Windows hosts to emulate a high performance and fault tolerant virtual SAN. All of them do this in active-active mode (all nodes handle I/O) and at least StarWind and DataCore have sophisticated
    distributed cache implementations (RAM and flash).
    2) Get incompatible software (MSFT iSCSI target) and run it in generic Windows cluster. That would require you to have CSV so physical shared storage (FC or SAS, iSCSI obviously has zero sense as you can feed THAT iSCSI target directly to your block storage
    consumers). This is doable and is supported by MSFS but has numerous drawbacks. First of all it's SLOW as a) MSFT target does no caching and even does not use file system cache (at all, VHDX it uses as a containers are opened and I/O-ed in a "pass-thru" mode)
    b) it's only active-passive (one node will handle I/O @ a time with other one just doing nothing in standby mode) and c) long I/O route (iSCSI initiator -> MSFT iSCSI target -> clustered block back end). For reference see:
    Configuring iSCSI Storage for High Availability
    http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
    MSFT iSCSI Target Cluster
    http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
    3) Re-think what you do. Except iSCSI target from MSFT you can use newer technologies like SoFS (obviously faster but requires a set of a dedicated servers) or just a shared VHDX if you have a fault tolerant SAS or FC back end and want to spawn a guest VM
    cluster. See:
    Scale-Out File Servers
    http://technet.microsoft.com/en-us/library/hh831349.aspx
    Deploy a Guest Cluster Using a Shared Virtual Hard Disk
    http://technet.microsoft.com/en-us/library/dn265980.aspx
    With Windows Server 2012 R2 release virtual FC and clustered MSFT target are both really deprecated features as shared VHDX is both faster and easier to setup and use if you have FC or SAS block back end and need to have guest VM cluster.
    Hope this helped a bit :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Maybe you are looking for

  • Does ipad have bluetooth to be able to connect iphone internet to the ipad?

    does ipad have bluetooth that will allow the iphone's internet to be used by the ipad?

  • CS6 Master Collection - Opening and Saving Time Issues

    When using PS, AI, and ID it literally takes up to 3-5 mins to open a recent project or to save any project. It seems to be only with these three applications. However, when it finally opens, the application works completely well. I have CS5 and CS6

  • Automatically selecting the correct network.

    My wife has an G4 iBook. She has a wireless network at work and home. When she turns on her iBook at work, it automatically connects to that network. At home, the iBook selects our neighbor's network. She has to manually select our home network. We w

  • Iphoto opens at startup

    Recently I am finding that iphoto keeps opening up automatically when ever I start up my computer. I don't want this to happen how can I resolve? Thanks,

  • "APXWS_MAX_ROW_CNT" value="10000" ORA-01722: número inválido

    I´m trying to fix it, anyone can help me? select        "ADD_TO_ORDER",        "VLLIQUIDO",        "DTVENCIMENTO",        "TXNOMEDIVISAO",        "TXNOME",        "TXNOMECONTAGERENCIAL",        "'ALT_ACRESC_DESC'",        "NRSEQCONTARECEBERPAGAR",