How to create a BSP to display the form in TWo Languages( English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon the annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Use a JFrame and paint on the content pane. Or a Frame with a Canvas (who the heck still uses AWT?).
They probably don't do anything because painting a button is not enough. It actually needs to be a button. Or Menu.

Similar Messages

How to create the BSP to display the document in two lang(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon that,Annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi ,
You can use BSP Application HAP_DOCUMENT for creating/modifying appraisal forms.
use the page document_todo.htm
Create a BSP Iview for documnet_todo.htm in the Portal...

How to Create the BSP for two languages(English & Arabic)

Hi ,
I got the requirement where i need to create the form for the Annuitant (Retriees) through they will inform their annuity department still they are surviving....so based upon the annuitant department run the annuity payslip for him.......
In that I should keep company information in the top and resprctive employee information like EMP ID and his contact address need to specify by default.....
For ex: Employee X is clicking this form..it should contain common information like company name and also employee's "X" respective information like his EMP ID and his contact address like wise the form should generate both common address and employee respective information.....both in Arabic and in english....
Is there any readymade BSP for this or if anybody have developed same kind of BSP pls send the code to [email protected]
How to do that.....ist very urgent.......
Help will be higly apppreciated.......
Thanks in Advance ,
Jasmine

Hi Jasmine,
I think you should try the SDN Search the next time before posting. You would have found this: [BSP/HowTo: Generate PDF Output from a BSP|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1002]. Also crossposting the same question is a bad behaviour.
Best regards
Gregor

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

How to create a event to display records depend on selection ofdropdownlist

BSP
how to create a event to display records depend on selection of dropdownlist box,
Using BHTML,
thank you,
regards,
jagrut bharatkumar shukla

1) Copy this script to the code
<script type="text/javascript">
function displayVacationDates() {
    for (var i=0; i < document.forms[0].Status.length; i++) {
        if (document.forms[0].Status[i].checked && document.forms[0].Status[i].value=='Vacation'){
          document.getElementById('startDateRow').style.visibility='visible';
          document.getElementById('endDateRow').style.visibility='visible';
         if (document.forms[0].Status[i].checked && !(document.forms[0].Status[i].value=='Vacation')){
         document.getElementById('startDateRow').style.visibility='hidden';
          document.getElementById('endDateRow').style.visibility='hidden';
</script>
2) Set initial style to 'hidden'
<tr id="startDateRow" style="visibility:hidden">
<td align="left"><blockquote>
<p><span class="style16 style8"><strong>Start date:
</strong></span></p>
</blockquote>                 </td>
<td align="left"><script>DateInput('VacStart', true, 'DD-MON-YYYY')</script></td>
</tr>
<tr id="endDateRow" style="visibility:hidden">
<td align="left"><blockquote>
<p><span class="style16 style8"><strong>End date:
</strong></span></p>
</blockquote>                      </td>
<td align="left"><script>DateInput('VacEnd', true, 'DD-MON-YYYY')</script></td>
</tr>
3) Call the display script
<input name="Status" type="radio" value="In the Field" onclick="displayVacationDates()">
<input name="Status" type="radio" value="Vacation" onclick="displayVacationDates()">
<input name="Status" type="radio" value="Sick day" onclick="displayVacationDates()">
<input name="Status" type="radio" value="Admin Day" onclick="displayVacationDates()">
<input name="Status" type="radio" value="DSR Ride Along" onclick="displayVacationDates()">
<input name="Status" type="radio" value="ServiceCall" onclick="displayVacationDates()">

How can I get iTunes to display the tracks from a CD in their original (album) order?

To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

Can any body tell me how to create a layout variant in the selection

hi friends i would like to know how to create a layout variant in the selection screen and how to select the variant to display the ouptut using the layout using disvariant.please if possible give me example. thanks in advance.

hi,
I shall give you the code. It will definitely work.
<u><b>Declerations you need to make</b></u>
data:      WK_VARIANT      LIKE DISVARIANT,
           WX_VARIANT      LIKE DISVARIANT,
           WK_REPID        LIKE SY-REPID,
           WK_VARIANT_SAVE(1) TYPE C,
           WK_EXIT(1) TYPE C.
<b><u>Things you need to do in the initialization event:</u></b>
INITIALIZATION.
PERFORM F_INIT_VARIANT.
PERFORM F_VARIANT_DEFAULT USING PR_VARI.
*&      Form f_init_variant
FORM F_INIT_VARIANT .
CLEAR WK_VARIANT.
WK_REPID = SY-REPID.
WK_VARIANT-REPORT = WK_REPID.
WK_VARIANT-USERNAME = SY-UNAME.
WK_VARIANT_SAVE = 'A'.
ENDFORM.                    " f_init_variant
*&      Form f_variant_default
FORM F_VARIANT_DEFAULT USING    P_PR_VARI.
WX_VARIANT = WK_VARIANT.
IF NOT P_PR_VARI IS INITIAL.
    WX_VARIANT-VARIANT = P_PR_VARI.
ENDIF.
CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
    EXPORTING
      I_SAVE        = WK_VARIANT_SAVE
    CHANGING
      CS_VARIANT    = WX_VARIANT
    EXCEPTIONS
      WRONG_INPUT   = 1
      NOT_FOUND     = 2
      PROGRAM_ERROR = 3
      OTHERS        = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CASE SY-SUBRC.
    WHEN 0.
      P_PR_VARI = WX_VARIANT-VARIANT.
    WHEN 2.
      CLEAR P_PR_VARI.
ENDCASE.
ENDFORM.                    " f_variant_default
<b><u> After this Things you need to do in the At selection screen event:</u></b>
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PR_VARI.
PERFORM F_VARIANT_F4 USING PR_VARI.
*&      Form f_variant_f4
FORM F_VARIANT_F4 USING    P_PR_VARI.
CALL FUNCTION 'LVC_VARIANT_F4'
    EXPORTING
      IS_VARIANT    = WK_VARIANT
      I_SAVE        = WK_VARIANT_SAVE
    IMPORTING
      E_EXIT        = WK_EXIT
      ES_VARIANT    = WX_VARIANT
    EXCEPTIONS
      NOT_FOUND     = 1
      PROGRAM_ERROR = 2
      OTHERS        = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF WK_EXIT IS INITIAL.
    WK_VARIANT-VARIANT = WX_VARIANT-VARIANT.
    P_PR_VARI = WX_VARIANT-VARIANT.
ENDIF.
ENDFORM.                    " f_variant_f4
After this finally when you call the output using REUSE_ALV_GRID_DISPLAY YOU NEED TO mention this parameter in the function module
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      <i><u><b>IS_LAYOUT          = WA_LAYOUT</b></u></i>
      <i><u><b>I_SAVE             = 'X'</b></u></i>
      <u><i>I_DEFAULT          = 'X'</i></u>
      <u><b>IS_VARIANT         = WK_VARIANT</b></u>
    TABLES
      T_OUTTAB           = ITAB1
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
Once you do this,,, you can create a layout variant.
P.S. Mark all helpful answers for points.
JLN

How to Create Interactive report lists for the gross sales, credit ....

How to Create Interactive report lists for the gross sales, credit returns, and gross weight for the customer for the current year and comparing the same with that of the previous year for the same period.....
plz tell me steps to accomplish this....plz ...give me the detail description..plz......many many thnx in advance...

Hi raja,
Display a checkbox , customer number on the basic list and also set a GUI STATUS on the basic list.....
Select the customer by checking the checkbox and click on the button you create in the GUI status....
Write the desired code to be displayed in
AT USER-COMMAND even checking the sy-ucomm....
so this would make you to into interactive list...
Hope this would help you.
Regards
Narin Nandivada

How to create a record based on the name of a file in the file-system?

Hi,
With a lot of pictures I want to have a database to gather some information about these pictures.
First question is how to generate a record based on a file in the file system?
e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
any suggestions?
any reaction will be appreciated.
Leo

Link to Create directory
http://www.adp-gmbh.ch/ora/sql/create_directory.html
You can create a list of files in the directory and read the list files from that directory.
[UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
[Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
SS

How to create multi garnishment order for the same garnishment document

Hi,
Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
Thanks a lot in advance.

hi,
As far as I got it.
You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
Since like order you cannot maintain adjustment also directly.
Regards,
Amit
Reward all helpful replies.

How to create a generalized version of the detailed polygons?

How to create a generalized version of the detailed polygons?
I have a table of detailed polygons (100+ vertices) and I want to get generalized version of these polygons.
For example, assume I have a polygon with 100 vertices. Distance between vertex n and n+1 is 1.0.
I want to get geometry (generalized polygon, line or point) where distance between vertex n and n+1 is 10.0 or more (I want vertices to be considered as one vertex if distance between them is less then 10.0).
Is it possible to create generalized version of polygons on the fly?
Any help is appreciated.
Thanks.

Scenario A:
If all of your polygons have no interaction among them (No polygon shares any boundary with any other ones).
In this case you can use the sdo_util.simplify in 10g to reduce the vertices in your polygons which returns new polygon geometries on the fly.
If you found that simplify is not doing exactly what you want, you can always roll out your own implementation using PL/SQL or the new SDOAPI JGeoemtry class in Java. Both will give you complete access to the coordinate arrays in a polygon and update them back to the database after you have simplified them in your code.
Scenario B:
If your polygons share boundaries, then the above methods will not work since the simplification process may not preserve the topology among your polygons. What you can do then is to use the Java topo package to create a new topology by adding all of your polygons to to an empty topology (which you first create in the database and then load into memory using oracle.spatial.topo.TopoMap). Once you have a topology built in the memory, you can use methods such as oracle.spatial.topo.TopoMap.changeEdgeCoords() to simplify the edges of your polygons. You can then recreate the simplified polygons from the topology. This is just a rough guide; for more details you need to check out the java doc for the various packages mentioned above which are shipped with 10g spatial.

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

How to create a snapshot report on the specific destination?

dear all
How to create a snapshot report on the specific destination?
thanks
john

user8779435 wrote:
dear all
How to create a snapshot report on the specific destination?
thanks
john
Hi,
when prompted just input the full path with filename for example
Enter value for report_name: /tmp/awrreport.htmlHope this helps
Cheers

How to create a different sid in the same system

Hi Experts
In one system already i have installed HP Quality center with Oracle, Now i want to install SAP on the same system. Please help me how to create a different SID on the same system.
Thanks in advance

Hi,
If you are talking about host...then when you will start installation of new system it ask for SID then choose different SID...
Thanks
Sunny

How to create a BSP to display the form in TWo Languages( English & Arabic)

Similar Messages

Maybe you are looking for