How to create a CALayer instance by the layer of a UIView instance

I mean, I need a copy of the layer of the current UIView instanse, code as follow:
UIView *aaaView = [[AAAView alloc] initWithFrame:CGRectMake(0.0, 0.0, 320.0, 480.0)];
CALayer *aaaViewLayer = [[CALayer alloc] initWithLayer:aaaView.layer];
[self.view.layer addSublayer:aaa];
but it shows nothing. I also try like this.
CALayer *aaaViewLayer = [CALayer layer];
aaaViewLayer.contents = aaaView.layer.contents;
aaaViewLayer.frame = aaaView.layer.frame;
but it still does not work. why? Is there a way?

Dont give him blind response
OP
What do you want?
New database or new instance?
new instance---Are you setting up RAC?

Similar Messages

  • How to create new OC4J instance in AS 10.1.3 with BC4J- and ADF-Libraries

    Hi
    I have done all the steps mentioned in this thread:
    How to create new OC4J instance in AS 10.1.3
    However, the new created OC4J instance obviously misses some libraries. If I deploy my Application to this OC4J I get an internal error: Class not found: oracle.jbo.JboException.
    The same Application runs well in the "home" Instance.
    What is the trick, to create a new OC4J instance, which more or less behaves the same way as the "home" instances (and especially has all the same libraries)?
    Thanks for your help
    Frank Brandstetter

    I encountered this last month. I definitely agree that it is a glaring omission to not have "Create Like" functionality when instantiating new containers. Here's my notes on the manual steps required after using createinstance to create the fresh container. Not too bad. I've been deploying ADF applications to the new container with no problems after this.
    ==============
    The default (home) OC4J container is pre-configured for ADF 10.1.3 applications; however, when $ORACLE_HOME/bin/createinstance is used to create additional containers, these containers are not configured automatically to host ADF 10.1.3 applications.
    I followed these manual steps:
    1. $ORACLE_HOME/j2ee/home/config/server.xml defines three shared libraries that "install" the needed JARs for Oracle ADF applications in your application server instance (container). Note that "install" does not necessarily mean available to applications (see Step 2). Copy the three shared library element definitions to the <application-server> element of your new container (in server.xml).
    <shared-library name="oracle.expression-evaluator" version="10.1.3" library-compatible="true">
         <code-source path="/usr2/oracle/as10130/jlib/commons-el.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/oracle-el.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/jsp-el-api.jar"/>
    </shared-library>
    <shared-library name="adf.oracle.domain" version="10.1.3" library-compatible="true">
         <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
         <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
         <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
         <import-shared-library name="oracle.xml"/>
         <import-shared-library name="oracle.jdbc"/>
         <import-shared-library name="oracle.cache"/>
         <import-shared-library name="oracle.dms"/>
         <import-shared-library name="oracle.sqlj"/>
         <import-shared-library name="oracle.toplink"/>
         <import-shared-library name="oracle.ws.core"/>
         <import-shared-library name="oracle.ws.client"/>
         <import-shared-library name="oracle.xml.security"/>
         <import-shared-library name="oracle.ws.security"/>
         <import-shared-library name="oracle.ws.reliability"/>
         <import-shared-library name="oracle.jwsdl"/>
         <import-shared-library name="oracle.http.client"/>
         <import-shared-library name="oracle.expression-evaluator"/>
    </shared-library>
    <shared-library name="adf.generic.domain" version="10.1.3" library-compatible="true">
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/bc4jdomgnrc.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
         <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
         <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
         <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
         <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
         <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
         <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
         <import-shared-library name="oracle.xml"/>
         <import-shared-library name="oracle.jdbc"/>
         <import-shared-library name="oracle.cache"/>
         <import-shared-library name="oracle.dms"/>
         <import-shared-library name="oracle.sqlj"/>
         <import-shared-library name="oracle.toplink"/>
         <import-shared-library name="oracle.ws.core"/>
         <import-shared-library name="oracle.ws.client"/>
         <import-shared-library name="oracle.xml.security"/>
         <import-shared-library name="oracle.ws.security"/>
         <import-shared-library name="oracle.ws.reliability"/>
         <import-shared-library name="oracle.jwsdl"/>
         <import-shared-library name="oracle.http.client"/>
         <import-shared-library name="oracle.expression-evaluator"/>
    </shared-library>
    2. To make the necessary ADF and JSF support libraries available to your deployed ADF application, the default application (that your ADF application and the majority of applications should inherit from) should explicitly import the shared library in the <orion-application> element of $ORACLE_HOME/j2ee/<your container>/config/application.xml.
    <imported-shared-libraries>
         <import-shared-library name="adf.oracle.domain"/>
    </imported-shared-libraries>
    Note: the adf.oracle.domain shared library imports several other shared libraries including oracle.expression-evaluator.

  • Service Manager 9.21: How to create a new instance of scautolistener and assign a port to it.

    Hi,
    2 instances of scautolistener are already running and i want to create a new instance of scautolistener.
    The sm.cfg file entry of scautolistener instances are:
    sm -scautolistener:12670 -debugscauto -log:..\logs\scauto.log
    sm -scautolistener:12690 -log:..\logs\scsmtp.log
    Please guide me as how to create a new instance of scautolistener.

    first, you cannot create instances of methods. but you can create instances of classes (==objects).
    the algorithm for primes does not work yet (its your work) but i inserted the code to create your object.
    import java.math.*;
    public class IsPrime {
    public boolean isPrime1(int arg){
    for(int e = 2; e < arg; e++){
    int remainder=arg%e;
    if(remainder==0){
    System.out.println("This number is not a prime number");
    break;
    else {
    System.out.println("This number is a prime number");
    break;
    return true;
    public static void main(String[] args){
    System.out.println(args.length);
    if (args.length>1){
    System.out.println("Sorry you can only enter one number");
    else{
    String sNum =args[0];
    int iNum=Integer.parseInt(sNum);
    IsPrime myPrimesObject = new IsPrime(); // here is your object
    if (myPrimesObject.IsPrime1(iNum)==true)
    System.out.println("is a prime");else System.out.println("is not a prime");
    }

  • How to create an asm instance manaually? oracle 11gr2.

    env: oracle 11gr2 os: hpux or aix single machine , not rac.
    question:how to create an asm instance manaually?? diskgroup,listener,db ,they can be resigistered to crs??
    can anyone give me document about it?

    Hi,
    This is a simple answer:
    Automatic Storage Management (ASM)
    ASM was a new storage option introduced with Oracle Database 10gR1 that provides the services of a filesystem, logical volume manager, and software RAID in a platform-independent manner. ASM can stripe and mirror your disks, allow disks to be added or removed while the database is under load, and automatically balance I/O to remove "hot spots." It also supports direct and asynchronous I/O and implements the Oracle Data Manager API (simplified I/O system call interface) introduced in Oracle9i.
    ASM is not a general-purpose filesystem and can be used only for Oracle data files, redo logs, and control files. Files in ASM can be created and named automatically by the database (by use of the Oracle Managed Files feature) or manually by the DBA. Because the files stored in ASM are not accessible to the operating system, the only way to perform backup and recovery operations on databases that use ASM files is through Recovery Manager (RMAN).
    ASM is implemented as a separate Oracle instance that must be up if other databases are to be able to access it. Memory requirements for ASM are light: only 64 MB for most systems.
    Installing ASM
    On Linux platforms, ASM can use raw devices or devices managed via the ASMLib interface. Oracle recommends ASMLib over raw devices for ease-of-use and performance reasons. ASMLib 2.0 is available for free download from OTN. This section walks through the process of configuring a simple ASM instance by using ASMLib 2.0 and building a database that uses ASM for disk storage.
    Determine Which Version of ASMLib You Need
    ASMLib 2.0 is delivered as a set of three Linux packages:
    * oracleasmlib-2.0 - the ASM libraries
    * oracleasm-support-2.0 - utilities needed to administer ASMLib
    * oracleasm - a kernel module for the ASM library
    Each Linux distribution has its own set of ASMLib 2.0 packages, and within each distribution, each kernel version has a corresponding oracleasm package. The following paragraphs describe how to determine which set of packages you need.
    First, determine which kernel you are using by logging in as root and running the following command:
    uname -rm
    Ex:
    # uname -rm
    2.6.9-22.ELsmp i686
    The example shows that this is a 2.6.9-22 kernel for an SMP (multiprocessor) box using Intel i686 CPUs.
    Use this information to find the correct ASMLib packages on OTN:
    1. Point your Web browser to http://www.oracle.com/technology/tech/linux/asmlib/index.html
    2. Select the link for your version of Linux.
    3. Download the oracleasmlib and oracleasm-support packages for your version of Linux
    4. Download the oracleasm package corresponding to your kernel. In the example above, the oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm package was used.
    Next, install the packages by executing the following command as root:
    rpm -Uvh oracleasm-kernel_version-asmlib_version.cpu_type.rpm \
    oracleasmlib-asmlib_version.cpu_type.rpm \
    oracleasm-support-asmlib_version.cpu_type.rpm
    Ex:
    # rpm -Uvh \
    > oracleasm-2.6.9-22.ELsmp-2.0.0-1.i686.rpm \
    > oracleasmlib-2.0.1-1.i386.rpm \
    > oracleasm-support-2.0.1-1.i386.rpm
    Preparing... ########################################### [100%]
    1:oracleasm-support ########################################### [ 33%]
    2:oracleasm-2.6.9-22.ELsm########################################### [ 67%]
    3:oracleasmlib ########################################### [100%]
    Configuring ASMLib
    Before using ASMLib, you must run a configuration script to prepare the driver. Run the following command as root, and answer the prompts as shown in the example below.
    # /etc/init.d/oracleasm configure
    Configuring the Oracle ASM library driver.
    This will configure the on-boot properties of the Oracle ASM library
    driver. The following questions will determine whether the driver is
    loaded on boot and what permissions it will have. The current values
    will be shown in brackets ('[]'). Hitting <ENTER> without typing an
    answer will keep that current value. Ctrl-C will abort.
    Default user to own the driver interface []: oracle
    Default group to own the driver interface []: dba
    Start Oracle ASM library driver on boot (y/n) [n]: y
    Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
    Writing Oracle ASM library driver configuration: [  OK  ]
    Creating /dev/oracleasm mount point: [  OK  ]
    Loading module "oracleasm": [  OK  ]
    Mounting ASMlib driver filesystem: [  OK  ]
    Scanning system for ASM disks: [  OK  ]
    Next you tell the ASM driver which disks you want it to use. Oracle recommends that each disk contain a single partition for the entire disk. See Partitioning the Disks at the beginning of this section for an example of creating disk partitions.
    You mark disks for use by ASMLib by running the following command as root:
    /etc/init.d/oracleasm createdisk DISK_NAME device_name
    Tip: Enter the DISK_NAME in UPPERCASE letters.
    Ex:
    # /etc/init.d/oracleasm createdisk VOL1 /dev/sdb1
    Marking disk "/dev/sdb1" as an ASM disk: [  OK  ]
    # /etc/init.d/oracleasm createdisk VOL1 /dev/sdc1
    Marking disk "/dev/sdc1" as an ASM disk: [  OK  ]
    # /etc/init.d/oracleasm createdisk VOL1 /dev/sdd1
    Marking disk "/dev/sdd1" as an ASM disk: [  OK  ]
    Verify that ASMLib has marked the disks:
    # /etc/init.d/oracleasm listdisks
    VOL1
    VOL2
    VOL3
    Create the ASM Instance
    ASM runs as a separate Oracle instance which can be created and configured using the Oracle Universal Installer. Now that ASMLib is installed and the disks are marked for use, you can create an ASM instance.
    Log in as oracle and start runInstaller:
    $ ./runInstaller
    1. Select Installation Method
    * Select Advanced Installation
    * Click on Next
    2. Specify Inventory Directory and Credentials
    * Inventory Directory: /u01/app/oracle/oraInventory
    * Operating System group name: oinstall
    * Click on Next
    3. Select Installation Type
    * Select Enterprise Edition
    * Click on Next
    4. Specify Home Details
    * Name: OraDB10gASM
    * Path: /u01/app/oracle/product/10.2.0/asm
    Note:Oracle recommends using a different ORACLE_HOME for ASM than the ORACLE_HOME used for the database for ease of administration.
    * Click on Next
    5. Product-specific Prerequisite Checks
    * If you've been following the steps in this guide, all the checks should pass without difficulty. If one or more checks fail, correct the problem before proceeding.
    * Click on Next
    6. Select Configuration Option
    * Select Configure Automatic Storage Management (ASM)
    * Enter the ASM SYS password and confirm
    * Click on Next
    7. Configure Automatic Storage Management
    * Disk Group Name: DATA
    * Redundancy
    - High mirrors data twice.
    - Normal mirrors data once. This is the default.
    - External does not mirror data within ASM. This is typically used if an external RAID array is providing redundancy.
    * Add Disks
    The disks you configured for use with ASMLib are listed as Candidate Disks. Select each disk you wish to include in the disk group.
    * Click on Next
    8. Summary
    * A summary of the products being installed is presented.
    * Click on Install.
    9. Execute Configuration Scripts
    * At the end of the installation, a pop up window will appear indicating scripts that need to be run as root. Login as root and run the indicated scripts.
    * Click on OK when finished.
    10. Configuration Assistants
    * The Oracle Net, Oracle Database, and iSQL*Plus configuration assistants will run automatically
    11. End of Installation
    * Make note of the URLs presented in the summary, and click on Exit when ready.
    12. Congratulations! Your new Oracle ASM Instance is up and ready for use.
    Kind regards
    Mohamed

  • How to create a web instance in weblogic?

              Dear All,
              I want to know how to create a web instance in weblogic server?
              Furthermore , where can i get more info. about the weblogic
              server , including how to use those examples pages provided from
              weblogic server, sampling of procedure to config each service ,
              e.g EJB , JSDB , JTA , etc., .
              thanks,
              chris
              

    Read the new JSP1.1 and servlet 2.2 specific for more information on
              this. You can deploy several jsp files in a single war file on a server.
              -- Prasad
              chris lee wrote:
              > Dear Prasad Peddada
              > Thank you for your helpful information.
              > I've read the page you have mentioned, I want to know
              > if I've serval pages written in jsp, how should I do if I
              > want to access those pages under the weblogic server?
              > Furthermore, Does the 'applicantion' mention in the paragraph
              > is the web instance I mentioned before?
              >
              > Thanks,
              > chris
              >
              > Prasad Peddada <[email protected]> wrote:
              > >http://edocs.beasys.com/wls/docs60/index.html
              > >
              > >-- Prasad
              > >
              > >chris lee wrote:
              > >
              > >> Dear All,
              > >> I want to know how to create a web instance in weblogic
              > >server?
              > >> Furthermore , where can i get more info. about the weblogic
              > >> server , including how to use those examples pages provided
              > >from
              > >> weblogic server, sampling of procedure to config each
              > >service ,
              > >> e.g EJB , JSDB , JTA , etc., .
              > >>
              > >> thanks,
              > >> chris
              > >
              Cheers
              - Prasad
              

  • How to create a record based on the name of a file in the file-system?

    Hi,
    With a lot of pictures I want to have a database to gather some information about these pictures.
    First question is how to generate a record based on a file in the file system?
    e.g. the pictures are "c:\fotos\2009\01\disc_001.jpg" to "c:\foto\2009\01\dis_98.jpg" .
    now i want to create records with as one of the attributes the name of the picture (not the picture itself). how to create these records (based on the information of the file-ssytem). i.e. the number of records should be the same as the number of pictures.
    any suggestions?
    any reaction will be appreciated.
    Leo

    Link to Create directory
    http://www.adp-gmbh.ch/ora/sql/create_directory.html
    You can create a list of files in the directory and read the list files from that directory.
    [UTL_FILE Documentation |http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/u_file.htm#996728]
    [Solution using Java|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:439619916584]
    SS

  • How to create multi garnishment order for the same garnishment document

    Hi,
    Can anyone tell me how to create multi garnishment order for the same garnishment document. I tried to copy the entry in IT0195 but the sequence field is grayed out so it will just delete the old record. What configuration should I do to make this possible?
    Thanks a lot in advance.

    hi,
    As far as I got it.
    You cannot have multiple Garnishment order but if a need arises you have to maintain it in IT216.
    For that follow this path goto PA30->pernr->194->change->Garnishment->adjustment.
    Since like order you cannot maintain adjustment also directly.
    Regards,
    Amit
    Reward all helpful replies.

  • How to create a generalized version of the detailed polygons?

    How to create a generalized version of the detailed polygons?
    I have a table of detailed polygons (100+ vertices) and I want to get generalized version of these polygons.
    For example, assume I have a polygon with 100 vertices. Distance between vertex n and n+1 is 1.0.
    I want to get geometry (generalized polygon, line or point) where distance between vertex n and n+1 is 10.0 or more (I want vertices to be considered as one vertex if distance between them is less then 10.0).
    Is it possible to create generalized version of polygons on the fly?
    Any help is appreciated.
    Thanks.

    Scenario A:
    If all of your polygons have no interaction among them (No polygon shares any boundary with any other ones).
    In this case you can use the sdo_util.simplify in 10g to reduce the vertices in your polygons which returns new polygon geometries on the fly.
    If you found that simplify is not doing exactly what you want, you can always roll out your own implementation using PL/SQL or the new SDOAPI JGeoemtry class in Java. Both will give you complete access to the coordinate arrays in a polygon and update them back to the database after you have simplified them in your code.
    Scenario B:
    If your polygons share boundaries, then the above methods will not work since the simplification process may not preserve the topology among your polygons. What you can do then is to use the Java topo package to create a new topology by adding all of your polygons to to an empty topology (which you first create in the database and then load into memory using oracle.spatial.topo.TopoMap). Once you have a topology built in the memory, you can use methods such as oracle.spatial.topo.TopoMap.changeEdgeCoords() to simplify the edges of your polygons. You can then recreate the simplified polygons from the topology. This is just a rough guide; for more details you need to check out the java doc for the various packages mentioned above which are shipped with 10g spatial.

  • How to create a temp table in the memory, not in disk?

    in sql server, you can create a temp table in the memory instead of disk,
    then you can do the insert, delete,update and select on it.
    after finishing, just release it.
    in Oracle,
    I am wonderfing how to create a temp table in the memory, not in disk?
    thanks,

    Thanks for rectifying me Howard.
    I just read your full article on this too and its very well explained here:
    http://www.dizwell.com/prod/node/357
    Few lines from your article
    It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
    Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they don’t swamp themselves, and start causing each other to age out back to disk.
    Thanks and Regards

  • How to create a snapshot report on the specific destination?

    dear all
    How to create a snapshot report on the specific destination?
    thanks
    john

    user8779435 wrote:
    dear all
    How to create a snapshot report on the specific destination?
    thanks
    john
    Hi,
    when prompted just input the full path with filename for example
    Enter value for report_name: /tmp/awrreport.htmlHope this helps
    Cheers

  • How to create  some columns dynamically in the report designer depending upon the input selection

    Post Author: ekta
    CA Forum: Crystal Reports
    how  to create  some columns dynamically in the report designer depending upon the input selection 
    how  export  this dynamic  report in (pdf , xls,doc and rtf format)
    report format is as below:
    Element Codes
    1
    16
    14
    11
    19
    10
    2
    3
    Employee nos.
    Employee Name
    Normal
    RDO
    WC
    Breveavement
    LWOP
    Sick
    Carers leave
    AL
    O/T 1.5
    O/T 2.0
    Total Hours
    000004
    PHAN , Hanh Huynh
    68.40
    7.60
    76.00
    000010
    I , Jungue
    68.40
    7.60
    2.00
    5.00
    76.00
    000022
    GARFINKEL , Hersch
    66.30
    7.60
    2.10
    76.00
    In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
    if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
    Can anybody help me how do I design such report....
    Thanks

    Hi Developer life,
    According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
    As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric  values) in the details,  add  an filter to filter the data base on this column group, but if
    the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
    If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
    Similar threads with details steps for your reference:
    https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings 
    If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
    Any question, please feel free to let me know.
    Best Regards
    Vicky Liu

  • How to create a different sid in the same  system

    Hi Experts
    In one system already i have installed HP Quality center with Oracle, Now i want to install SAP on the same system. Please help me how to create a different SID on the same system.
    Thanks in advance

    Hi,
    If you are talking about host...then when you will start installation of new system it ask for SID then choose different SID...
    Thanks
    Sunny

  • How to get the spool id or how to create a spool id for the report .

    hi,
    how to get the spool id or how to create a spool id for the report .
    this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
    my requirement is to download a pdf file from the alv grid list.

    Hi Raghu,
    Execute this program.
    REPORT  ZTEST_3318                              .
    tables: usr01.
    perform send_report_to_spool.
    *&      Form  send_report_to_spool
          text
    form send_report_to_spool.
      data: loc_dest like pri_params-pdest,
            wf_listname type char12,
            wf_listtext like PRI_PARAMS-PRTXT,
            wf_copies type i,
            wf_days type i,
            wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
            wf_valid type c.
      clear : wf_listname , loc_dest , wf_listtext .
      move: 'AP interface' to   wf_listname .
      move: 'AP interface' to   wf_listtext .
    select single spld into usr01-spld from usr01 where bname eq sy-uname .
      if sy-subrc eq 0 .
        move: usr01-spld to loc_dest .
      endif .
      call function 'GET_PRINT_PARAMETERS'
        EXPORTING
          destination    = loc_dest
          copies         = 1
          list_name      = wf_listname
          list_text      = wf_listtext
          immediately    = ' '
          release        = ' '
          new_list_id    = 'X'
          expiration     = 1
          line_size      = 200
          line_count     = 65
          layout         = 'X_65_200'
          sap_cover_page = 'X'
          receiver       = 'SAP*'
          department     = ''
          no_dialog      = 'X'
        IMPORTING
          out_parameters = wf_params
          valid          = wf_valid.
      if wf_valid <> space.
        new-page print on parameters wf_params no dialog.
        perform write_summary .
        new-page print off.
      endif .
    endform.                    "send_report_to_spool
    *&      Form  write_summary
          text
    -->  p1        text
    <--  p2        text
    FORM write_summary .
    data: begin of itab occurs 0,
          matnr type matnr,
          end of itab.
    select matnr
           from mara
           into table itab
           up to 10 rows.
    loop at itab.
    write: / itab-matnr.
    endloop.
    ENDFORM.                    " write_summary
    This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
    After that use that spool for your purpose.
    If Useful award point

  • How to create an install cd with the final cut pro x app if the app comes from App.Store?

    How to create an install cd with the final cut pro x app if the app comes from App.Store?

    Just copy the Application FCPX to your CD. When you want to install drag the FCPX to the Application folder and you are done.

  • How to create a new folder within the video folder in media

    Hi, I'm trying to figure out how to create a new folder within the video folder in media. I can easily create new folders within the pictures folder but not in videos.....Why??? Thanks in advance for your help.
    Message Edited by dany_s on 06-25-2009 03:58 PM
    Solved!
    Go to Solution.

    Hello,
    I think you can try two things : the soft reboot, and if it does not work, the hard reboot. Don't worry, you can't lose data with these two reboots.
    Soft reboot :
    1) Hit the three following keys at the same time :
    - Alt
    - Right Shift
    - Delete
    2) wait 2 minutes for the Blackberry to wake up.
    Hard reboot :
    1) your Blackberry device is on
    2) remove the battery and wait for a minute
    3) Put the battery back
    4) wait 5 minutes for the device to wake up.
    Please tell us if it works for you.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for