How to create a campaign(Voucher/Coupon) in CRM based on ECC sales order

Hello All,
We have a requirement, in Coupon code generation . When sales order are created successfully in ECC, based on the ECC sales order campaign(Coupon/Voucher) needs to be generated in CRM.
Please help me in this regard.
Regards
Ashwin

i found appropriate support on Welcome to the SAP Configuration Workgroup! | Configuration Workgroup
Thus, i posted there a simple example of the achievement ! :-)

Similar Messages

  • How to created a Report to calculate On-Hand inventory for pending sales

    hi,
        how to  created a Report to calculate On-Hand inventory for pending sales orders.for this report what are the tables and fields we have to use give me sample report.
    thank you
    radhakrishna.

    Hi!
    Tables:
    VBAK - sales order header data
    VBAP - sales order position data
    VBUK - sales order status header data
    VBUP - sales order status position data
    VBELN field is the key between the tables.
    Statuses in tables VBUK, VBUP: A-uncompleted, B-partially completed, C-fully completed
    Regards
    Tamá

  • How to link CRM Campaign to ECC Sales Orders

    Dear all,
    How to see Sales (R/3) that happened as a result of Specific CRM Campaign execution.
    while creating R/3 Sales Order where do we refer relevant Campaign ID.
    In SAP how to analyse with respect to Budget, Cost and Actual Sales for a Campaign.
    In Campaign where do we enter Budget and Cost information and how will it synchronize with R/3 system for revenue analysis purpose.
    What is the standard solution for this and what is the required landscape for this.
    Please help me to resolve the above issues, Each suggestion will be highly appreciated.
    Best regards
    Raghu ram

    Hi Raghu,
    You have to do the configuration related to Campaign Determination for geting the campaign Id in ECC sales Order.
    Pls find the related link to do the configuration
    http://help.sap.com/saphelp_crm40/helpdata/en/6b/160ade5eda5b42a0d756961f99a2a1/content.htm
    Regards
    Vinod

  • How to create an inspection lot for each line item of the Purchase order?

    Hi,
    How to create an inspection lot for each line item of the Purchase order ?
    In detail if possible.

    Hi
       please check this
    [thread|Create Inspection Lot;

  • How to create OEMS JMS In-Memory and File-Based Persistence?

    Anyone knows how to create OEMS JMS In-Memory and File-Based Persistence? Any help it is appreciated. I m working with Oracle BAM 11g TP4 and I want to test the capability of connecting directly to a JMS queue, and reading Oracle´s "complex" documentation I couldnt find the right way to make this happen.
    tks

    Hi Mario
    This is explained in the soa developer's guide. Chapter 43 "Enterprise message source"should help you. You will find how to connect OEMS or JMS in-memory/file based to your BAM data objects with or without xpath transformation.
    You can find sample of advanced XML formating in the 10g tech note: "Oracle BAM 10.1.3 configuration for BPEL 10.1.2 using JMS sensors" (useful even if you don't plan to use BPEL).
    Anyway, if you plan to use BPEL, forget JMS and use the BAM adapter (chapter 42), it's quicker & easier.
    Dominique

  • How to create OEMS JMS In-Memory and File-Based Persistence ? Anyone?

    Anyone knows how to create OEMS JMS In-Memory and File-Based Persistence? Any help it is appreciated. I m working with Oracle BAM 11g TP4 and I want to test the capability of connecting directly to a JMS queue, and reading Oracle´s "complex" documentation I couldnt find the right way to make this happen.
    tks

    Hi Mario
    This is explained in the soa developer's guide. Chapter 43 "Enterprise message source"should help you. You will find how to connect OEMS or JMS in-memory/file based to your BAM data objects with or without xpath transformation.
    You can find sample of advanced XML formating in the 10g tech note: "Oracle BAM 10.1.3 configuration for BPEL 10.1.2 using JMS sensors" (useful even if you don't plan to use BPEL).
    Anyway, if you plan to use BPEL, forget JMS and use the BAM adapter (chapter 42), it's quicker & easier.
    Dominique

  • How to create the new competitor products in CRM

    Dear Sir,
    How to create the new competitor products in CRM and  it will not synchonize to SAP R/3 for this products?
    Thanks and best regards,
    Vimol

    Hi,
    Have a look at these following thread for some more information on New Competitor Products in CRM
    Competitor Products (WETT) in CRM 5.2
    Hope this will somewhat help.
    Thanks,
    Samantak.

  • How can we identify what are all user exits are there for sales orders,deli

    Dear All,
    How can we identify what are all user exits are there for sales orders,deliverys and invoices
    thanks
    nitchel v

    Hi Nitchel
    There are many ways to find out the user exits..
    For example for VA01.
    Goto Transaction ie VA01:
    goto System-- Status
    doubleclick on the program name ie SAPMV45A
    SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
    get the package name from here ie VA
    note the package(VA) and get back to main screen
    goto SMOD tcode  and click on find button in the package spec giv the package name ie VA and execute it
    you will find list of exits available
    check out the exit that suits ur requirement
    goto cmod and create a new project and implement in that user exit.
    You will get the following exits in SMOD..
    SDTRM001  Reschedule schedule lines without a new ATP check
    V45A0001  Determine alternative materials for product selection
    V45A0002  Predefine sold-to party in sales document
    V45A0003  Collector for customer function modulpool MV45A
    V45A0004  Copy packing proposal
    V45E0001  Update the purchase order from the sales order
    V45E0002  Data transfer in procurement elements (PRreq., assembly
    V45L0001  SD component supplier processing (customer enhancements
    V45P0001  SD customer function for cross-company code sales
    V45S0001  Update sales document from configuration
    V45S0003  MRP-relevance for incomplete configuration
    V45S0004  Effectivity type in sales order
    V45W0001  SD Service Management: Forward Contract Data to Item
    V46H0001  SD Customer functions for resource-related billing
    V60F0001  SD Billing plan (customer enhancement) diff. to billing
    For Delivery you will get .. here the package name will be VL.
    V02V0001  Sales area determination for stock transport order
    V02V0002  User exit for storage location determination
    V02V0003  User exit for gate + matl staging area determination (h
    V02V0004  User Exit for Staging Area Determination (Item)
    V50PSTAT  Delivery: Item Status Calculation
    V50Q0001  Delivery Monitor: User Exits for Filling Display Fields
    V50R0001  Collective processing for delivery creation
    V50R0002  Collective processing for delivery creation
    V50R0004  Calculation of Stock for POs for Shipping Due Date List
    V50S0001  User Exits for Delivery Processing
    V53C0001  Rough workload calculation in time per item
    V53C0002  W&S: RWE enhancement - shipping material type/time slot
    V53W0001  User exits for creating picking waves
    VMDE0001  Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002  Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003  Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004  Shipping Interface: Message SDPACK (Packing, Inbound)
    For Billing VF01..Package is VF..
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    Or another way is ..
    - Get the program name for that T-Code
    - Go to that program
    - In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
    And also you can check in the tables in SE16 for user exits..
    MODSAP - Stores SAP Enhancements
    MODSAPT - Stores SAP Enhancements - Short Texts
    MODACT - Stores Modifications
    And there are other ways as well , pls check the forum for this ,
    Regards,
    Vvieks
    Note : If you have any specific requirement then pls let us know , we will guide you

  • Creating Outbound deliveries based on the sales order schedule lines

    Dear all.
    Is it possible to create outbound delivery documents based on the sales order schedule lines?
    Eg:
    Let's say I have sales order line item 10 with below mentioned requested delivery dates in its schedule line level.
    30.07.2009
    10.08.2009
    20.08.2009
    30.08.2009
    Will it possible for me to create different deliveries for those 4 schedule lines individually? I should be able to create 10.08.2009 delivery without clubbing 30.07.2009 delivery with it.
    Appreciate your help!

    I'm not sure because I'm not before SAP but try transaction VL10E that is to create delivery for schedule lines. I'm not sure what are the split criterias.
    Please check OSS note 113411 tha has many OSS note reference in this subject.
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 29, 2009 2:38 PM

  • Creating a delivery note based on a sales order in SBO2005

    Hi
    I am using the diapi to create a delivery note based on a sales order. Everything works well apart from I have 3 user defined fields on the sales order lines, 2 numeric and one which is a combo box.
    The 2 numeric values as copied across ok but the combo is not.
    I don't know what the delivery number is as I guess SAP assigns that after I save the delivery note.
    Can anyone help me with this please ?
    Regards Andy

    Hi Paul & Gilbert,
    As you assumed, the docentry is created at the moment when you are saving the document.
    The docentry for the last created document can be retrieved from the Company object. There are two alternative methods for this: GetNewObjectCode and GetNewObjectKey. Please see the DI API reference for more details. These are the only reliable way to get the last created docentry. A query might work nicely in 95% of the cases, but in a multi-user environment it will sooner or later produce incorrect results.
    Henry

  • One time Discount Coupon to be used during the Sales Order Creation

    I need help to configure a one time coupon to be used during a Sales Order creation. During 2009 our customers that have purchased more than certain amount we are going to give them a discount Coupon with a code that they can use just one time during his next purchase. I need help to configure this request.
    Thanks

    Hi Gilberto
    Go VK11.
    After maintaining the material & price, please go to -->Additional data.
    You will be displayed with Validity, Assignments, Assignments for retail promotion, Limits for Pricing, Payments.
    In the 'Limits for Pricing' you have three options - Max. condition value, Max number of orders & Max condition base value.
    In the Max number of Orders - enter 1 to avail this special price only for first order.
    Importent Note: to activate the ' Limit of Pricing' -- you need to tick 'Condition update' for the particular contion type, in condition type customising.
    FOr eg. condition type - ZR00 - you need to have special price for this condition type & want to limit only for first order order.
    In the customising for ZR00 - 'condition update' need to be ticked, then only you can get the above option.
    i hope it is clear to you
    thank you
    Anirudh

  • How to create a campaign based on a template using the REST API

    Hi CodeIt-ers,
    I'm using the REST API to create campaigns in Eloqua 10, all works well except for 1 thing: I can't seem to create a campaign based on an existing Campaign template.
    Based on the documentation on REST API - Accessing Campaigns I've tried using "sourceTemplateId" (code snippet below) but that did not do the trick.
    Does that functionality simply not work or am I missing something?
    Thanks!
    Ferry
    $campaign_data = new Campaign(); 
    $campaign_data->sourceTemplateId='442';
    $campaign_data->folderId='1137';
    $campaign_data->currentStatus='draft';

    Hi Richard,
    Unfortunately no. I reached out to support, they informed me "sourceTemplateId" could not be used to create new campaigns based on a template, instead they advised to use the "Elements " property as shown in this example: Eloqua REST API - Create a Campaign with a Segment and Email
    Thanks
    Ferry

  • How to create a custom Report in SAP CRM using the Bol Framework

    Hi Guys
    I have developed a report in SE38 which calls a custom Function Module within it and it works all good.
    Now I want to take my Function Module as well as the external structures I created for this report and use them to make a View in SAP CRM which will allow the user to make selection and then when they click on a button another view has to be shown which should have the content of the report based on the selection.
    I know how to create a view based on the standard object types but this time I want to use my custom function Module..
    Kindly advice or refer me to a link that might be useful.
    Regards
    * Thato                                                                        *

    You want to create a View in SE11 calling FM that you created? Is it?

  • How to create a group in SCOM 2012 R2 based on SCCM Collection?

    Is there a way to create a group in SCOM 2012 R2 based on sccm collection? I am planning to use that group for maintenance mode.
    Thanks, Samer

    Hi,
    I think you could query all the collectin members from SCCM database then use powershell to add them to a specific OU.
    How to Create Groups in Operations Manager
    http://technet.microsoft.com/en-us/library/hh298605.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to create a new row for a VO based on values from another VO?

    Hi, experts.
    in jdev 11.1.2.3,
    How to create a new row for VO1 based on values from another VO2 in the same page?
    and in my use case it's preferable to do this from the UI rather than from business logic layer(EO).
    Also I have read Frank Nimphius' following blog,but in his example the source VO and the destination VO are the same.
    How-to declaratively create new table rows based on existing row content (20-NOV-2008)
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/13-create-with-params-169140.pdf
    I have tried:
    1.VO1(id,amount,remark1) and VO2(id,amount,remark2) are based on different EO,but render in same page,
    2.Drag and drop a Createwithparams button for VO1(id,amount,remark),
    3.add: Create insertinside Createwithparams->Nameddata(amount),
    4.set NDName:amount, NDValue:#{bindings.VO2.children.Amount}, NDtype:oracle.jbo.domain.Number.
    On running,when press button Createwithparams, cannot create a new row for VO1, and get error msg:
    <Utils> <buildFacesMessage> ADF: Adding the following JSF error message: For input string: "Amount"
    java.lang.NumberFormatException: For input string: "Amount"
         at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
    Can anyone give some suggestions?
    Thanks in advance.
    bao
    Edited by: user6715237 on 2013-4-19 下午9:29

    Hi,CM,
    I'm really very appreciated for your quick reply! You know, today is Saturday, it's not a day for everyone at work.
    My principal requirement is as follows:
    1.select/check some rows from VO2, and for each selection create a new row with some attributes from VO2 as default values for VO1's corresponding attributes, and during this process the user may be cancel/uncheck or redo some of the selections.
    --so it's better to implement it in UI rather than in EO.
    2.it's better to implement this function with declarative way as in Frank Nimphius' blog.
    --little Jave/JS coding, the better. I only have experience in ORACLE FORMS, little experience in JAVA/JS.
    In order to get full information for the requirements of my use case, can take a check at:
    How to set default value for a VO query bind variable in a jspx page?
    (the end half of the thread: I have a more realworld requirement similar to the above requirement is:
    Manage bank transactions for clients. and give invoices to clients according to their transaction records. One invoice can contain one or many transactions records. and one transaction records can be split into many invoices.
    Regards
    bao
    Edited by: user6715237 on 2013-4-19 下午11:18
    JAVE->JAVA

Maybe you are looking for