How to create a chat between portals

Hi,
I would like to know if it's possible to create a chat (into Collaboration) between two portals. For example, to communicate a portal from Spain with another portal in EEUU.
if so, how could I create it? Do I need federate portals for it?
Thanks in advance,
Samantha.

Activate the collaboration launch pad and do the following ...you should have the chat session working.....
Instant Messenger
In order to be able to use the Real-Time Collaboration functions (sending instant messages or sharing applications), you must activate the RTC Session Manager after installing Collaboration.
To activate the RTC Session Manager, perform the following steps:
1.     Go to the default framework page.
Enterprise Portal     Portal Content ® Portal Users ® Standard Portal Users ® Default Framework Page.
2.     Double-click Default Framework Page.
3.     Select the Tool Area iView checkbox and choose Open.
4.     Choose Show All in the Property Editor drop list menu.
5.     Expand the Enable Real-Time Collaboration properties.
6.     Select Yes radio button.
7.     Choose Save.
8.     Choose Close.
9.     Choose F5 to refresh your portal screen.
Two synchronous collaboration service providers are included with the initial installation of the Collaboration for SAP Enterprise Portal. The initially installed synchronous collaboration service providers are:
     Real Time Collaboration (SAP RTC), which provides application sharing.
     WebEx, which provides the WebEx meeting center service.
Upon installation of Collaboration for SAP Enterprise Portal, synchronous collaboration services are not activated. You must activate synchronous collaboration service types before they can be used.
10.     Review the list of activated service types.
Go to System Administration  System Configuration  Knowledge Management  Collaboration  Synchronous Collaboration Services  Activated Service Types
11.     Choose New button.
12.     Check the RTC_ApplicationSharing checkbox.
value points if this helps you !!

Similar Messages

How do we transfer content between Portals ?

Hi all ,
How do we transfer content between Portals . In SAP R3 we transfer content using transport request. can any one explain how do we transfer content between poptals (Development, quality and porduction systems)
Thanks
Rajeev.

Hi,
You will use Portal Transport to transport content between your DEV-QA-PROD system.
You will have to go to system administraton-->transport tab.
Create a transport package and add the portal content objects you wish to transport.
and download that as an EPA file and upload it to the next portal.
http://help.sap.com/saphelp_nw70/helpdata/EN/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm
Thanks,
GLM

How to create a connection between SAP BPC 10.0 to SAP BOBJ

Hi friends,
My client want see the reports in BOBJ which are built in SAP BPC. How to create the conncetion between BPC and BOBJ.
1.Is there any guide to create such connection ?
2.how the data feed to BOBJ reports?
please help me ASAP.
Regards,
Saida Reddy G

Hi,
Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5?QuickLink=index&…
How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation
Hope it helps...
regards,
Raju

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create a link between 2 cells in different spreadsheets?

when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?

In the cell where you want the duplicate data to appear from another sheet/table do the following:
type the equal sign ("=") then click the cell you in the sheet table while contents you want to appear in the cell where you just typed the equal sign"
it reads "The cell I click equals the result of the formula or the contents of the next cell I click"

How to create database link between oracle9i database and oracle10g

How to create database link between oracle9i database and oracle10g
oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
Please help me on this

For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
Connections between 10.2 and 9.0.1 was never been supported.
Cheers !!!!
Bhupinder

How to create an relation between two block

Oracle forms 6i
Hai All
I have created a form in that i have four button ADD, QUERY, SAVE ,EXIT.
I have two block named Leader and members.
Four fields in leader block namely name , codeno, deptcode, unitid.
When i pressed query button and the cursor goes to name field in leader when i enter the name of leader and click
enter i gives the codeno, deptcode and unitid of the leader_name.
so now i have created another block in tabular structure to bring the members in the same deptcode that belongs to Leader_name.
So pls tell me the steps how to create the relation between these two blocks.
when i enter the leader_name and gives enter it needs to bring the codeno, deptcode, unitid and
I also need to gives the members in that deptcode..
Thanks In Advance
Srikkanth.M

If it is possible to create relationship with one table No.
Or
I have created a pre-Query in the detali block and my code is
set_block_property ('block_name', default_where, 'deptcode = (select deptcode from emplmaster where name like :block_in_which_leader_name.leader_name_field');BTW no need of joining here it can be solve by set the block's where clause as u said in ur earlier post above. Just changing the little bit this statement and then try.
If numeric
set_block_property ('block_name', default_where, 'deptcode = '||:block_in_which_leader_name.leader_name_field);
Otherwire
set_block_property ('block_name', default_where, 'deptcode = '''||:block_in_which_leader_name.leader_name_field||'''');-Ammad

How to create radio button between two slection screen

hello all.
could you please guide me how to create radio button between two SELECTION-SCREEN in screen painter.
Thank you,
srinivas

hi
SEE THIS CODE
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R4 RADIOBUTTON GROUP G2.
SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
<b>rEWARD IF USEFULL</b>

How to create a relationship between 2 GOS objects

Hi all,
I have a small problem how to create a link between 2 GOS (businnes objects) .
I have 2 different business objects ( Z* type, for example class Z1 and Z2) defined using SWO1, and I want to create link between instances of 2 GOS objects.
I try to use FM 'BINARY_RELATION_CREATE' ,
fill parameters OBJ_ROLEA , OBJ_ROLEB ,
but I know how to fill parameter RELATIONTYPE.
All the time I got a message RL 301 (Role type '&1' is not assigned object type '&2').
Should I make some customization (and how ) for roles of object Z1 and Z2 ?
Or should I use any general relationtype ?
Can somebody helo me to explain, how to make customization , or any link, example ?
Thanks in advance
Milan Dobias

Thanks for Your answer, but main problem is what relation type use to create link between 2 common objects.
Your solution (use class CL_BINARY_RELATION) returns the same error message, because this class is used in FM BINARY_RELATION_CREATE.
In the end I found that solution is to use as relationtype (ORBRELTYP-RELTYPE = 'ASGN').
    CALL FUNCTION 'BINARY_RELATION_CREATE'
      EXPORTING
        obj_rolea      = obj_a
        obj_roleb      = obj_b
        relationtype   = 'ASGN'
      EXCEPTIONS
        no_model       = 1
        internal_error = 2
        unknown        = 3
        OTHERS         = 4.
It seems to work and on both objects (A and B) I can see link (relation).
Best regards,
MD

How to Create diff URL in Portal.

Hi Friends.
I have one doubt on How to Create diff URL in Portal. We have only one EP-Server.
For Example I have done logon page for portal when open the portal URL I m getting that logon page. So I did not get SAP Standard Logon Page By using Same URL.
So I need one more Diff URL that URL having my Logon page. So that time I login into the Portal I am able to see our logon Page.
When I logon to diff URL that time I am able to See SAP Standard Logon Page.
Regards
Vijay Kalluri

Hi,
SAP Logon page gets loaded based on similar concept of Servlet-jsp works i.e. based on pattern passed, in usual case irj is pattern which is identified by j2ee engine based on xml as portal web component and invokes it.
Now to have 2 different logon pages; we need to pass 2 different patterns: have an entry for each in xml file and different web components for each.
This is solely based on my cinceptual knowledge but have not tried it.

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

How to Create a system in portal server

I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...

Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much.

How to create wiki pages in portal

Is there any way available to create wiki pages in portal? All the users logged in portal can be able to create the pages. The users can have the option to search for the wiki's.
How can we achieve this? Help us to drive this.

Hi Parvathy,
Please check the blog in below to have an idea.
Wiki Wiki World and Portals
Please do not forget reward points for good answers...
Regards,

How to create ODBC connection between Oracle 10g and MS SQL Server

Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
Shanil

Hi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg

How to create a chat between portals

Similar Messages

Maybe you are looking for