How to create a check box that will result in text being hidden or visable?

I am creating a PDF form and have a section where a reference needs to be entered.
My problem is that the references are each several lines long therefore I cannot use a drop down for the user to select.
To combat this I want to have 3 check boxes, each which relate to a specific reference.When the check box is ticked the reference will be displayed.
If the box is un-ticked the reference will be hidden.
Any help or other ideas to solve this issue would be Much appreciated.

OK, so I have managed to make the check button make an option hidden, however I cannot make it reappear. I have also set a button at the top of the form to reset it but this does not work on these boxes.......

Similar Messages

  • How to create a check box that can be unchecked

    How do I create check boxes that can be checked and the unchecked in Forms Central?
    For example, if you accidentally check a box - you want to uncheck it. Right now it doesn't allow you to do that.
    please help.
    Thanks
    Gen

    Are you sure you're not using radio buttons? Check boxes behave the way you'd expect for me with a form generated by FormsCentral.
    I'm going to move this to the FormsCentral form since the team there may want to take a look at the form.

  • How to create a check box with an X

    Hi,
    How do you create a check box with an X as apposed to a tick?
    Thanks

    Go to the check box's properties and in the Options tab choose "Cross" as the check box style.

  • How to create the Check box and Text Area inside the Assignment block

    Dear all,
            I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
    Thanks & Regards,
    Ashok.

    Hi,
      Please place the below code in the GET_P methods of the fields.
      For Text Area 
    CASE iv_property.
        WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
          rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
      ENDCASE.
    For Check Box 
    CASE iv_property.
        WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
          rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
      ENDCASE.
    Regards,
    Lakshmi.Y

  • How to create email message filter that will AND multiple keywords in the message body

    Greetings,
    I am using BlackBerry Desktop Manager (version 4.3.0.17) and I need a filter that will match ALL keywords in the body of a note rather than ANY one of a list of keywords. I understand that separating keywords with a semicolon will match on any one of them, but I would like to match on ALL keywords that may be interspersed throughout the body of the email. In other words, I understand that the semicolon works like an OR connector. I need a connector that works like an AND.

    Hi bik,
    >> how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible in a text editor but not the text file. 
    It is unclear to me. Like you mentioned F keys, how does it work for?  And Could you show us some code with a simple sample or a capture? It could be better to help us understand more.
    In addition, I found a related thread
    Tag editing in a WPF TextBox. Not sure if it is useful for you. Thanks.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to create the check box?

    Hi,
    Can I create the check list in my digital publishing use check box in buttons & forms?
    I try it before but it doesn't work, only preview a tick in box??
    Thx!

    DPS doesn't support creating forms directly. You'll need to create it in HTML and then include it in your folio using a web overlay.
    Neil

  • How to create a check box in Acrobat 9?

    Hello all,
    I remember in Acrobat 8 this would be very easy. Just go to Tools --> Advanced Editing --> Forms --> Check Box Tool. Here it is. But in Acrobat 9, I can no longer see this option. Somebody helps. Many thanks.
    Supermansaga

    I am pretty sure the tool is still there. Adobe seems to enjoy moving the tools around, so try some of the other menus. If there is no forms menu there, try the advanced editing as the old location. It seems to have moved with every version.

  • HT5493 how about giving us a URL that will result in the the "missing plug-in" region appearing so that we can proactively download new java version?

    just accepted OSX update for Oracle SE Java - want to make sure the new plug-in is installed before giving access to wife - need a URL that will ask for the plug-in to be downloaded as the OSX update only removed the apple version.

    How do I test whether Java is working on my computer?

  • Create a check box in excel cell  using sap abap

    Dear Sap Master's,
    Please give me some idea on  how to create a check box in excel cell using abap program..
    (OLE concept).
    Thanks
    Moderator message: please search for available information first.
    Edited by: Thomas Zloch on Jan 12, 2012

    select the cell then open the cell formatter:
    process should be similar in the iOS version.  I do not have any iOS devices with Numbers so I cannot check.  I did find this link that may help:
    http://support.apple.com/kb/PH3374?viewlocale=en_US

  • How do I create a check-box matrix question using Acrobat XI Pro?

    I would like to insert a question that is a 10 x 10 matrix that allows respondents to select multiple boxes in each row.  For example, the "add item > rating scale" feature formats a matrix the way I would like, although it only seems to allow for radio buttons.  With this feature, respondents can only select one item per row.  Is there any way to use this feature with check-boxes rather than radio buttons?  Or a different feature to create a matrix that allows for multiple selections per row? 
    Thanks so much,
    Andy 

    I created a 30 page Form in Microsoft Word with 20 to 30 check boxes on each page using the Zapf Dingbats Font.
    When I used Acrobat XI Pro to automatically convert the form it fails to create usable check boxes.
    It worked properly about 3 times on test pages but it will not do it again.
    Manually inserting check boxes one by one on 30 pages is mind numbing to say the least.
    Why doesn't the software work properly anymore?

  • How does one create a "check box" in a cell?

    How does one create a "check box" in a cell?

    select the cell then open the cell formatter:
    process should be similar in the iOS version.  I do not have any iOS devices with Numbers so I cannot check.  I did find this link that may help:
    http://support.apple.com/kb/PH3374?viewlocale=en_US

  • How do I create a check box?

    Hey there,
    I want to create a check box beside a text, like "keep me logged in". Anyone who can explain me how to do that?
    Thanks,
    alewei

    A checkbox is a form element. Fireworks doesn't do forms. You'll need to do that in Dreamweaver.

  • I have a box that will not go away, it says,  "To open JavaApplication, you need to install a Java SE 6 runtime.  Would you like to check for and install one?  If i push not now, it keeps popping up, if I push install, it says it's not available, help.

    I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion.  the box says, "To open JavaApplication, you need to install a Java 6 SE runtime.  Would you like to check for and install one?  (smaller print)  Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading.  A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
    Finally there are two boxes to click.  One says not now.  If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away.  If I click on the second box, Install, it says  The software is currently unavailable.  To install a Java SE 6 runtime later, open Java Application again.
    My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help.  My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can.  Help.

    Does this happen immediately after you log in? If so, one of your login items is probably causing it.

  • I am trying to use an education program that needs Java applets to install and use and it will not use Safari. When I download IE from the web it will not install. How can I get a browser that will work on my MacAir for travel use of this program?

    I am trying to use and education program that needs Java applets and it will not run on Safari. IE will not install from the web. How do I get a browser that will work to install so I can use this program when I travel.

    Try using FireFox. IE will only run on a Mac if you run Windows on the Mac.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
    Install the Apple Boot Camp software.  Purchase Windows 7 or Windows 8.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
    Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • How to create a standard report that allows filtering?

    Hi Guys and Gals,
    Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    Allowing the user to specify the number of rows displayed would be peachy-keen too.
    Thanks,
    Kim
    P.S. I'm running Apex 4.1 with Oracle 11g.

    Kim2012 wrote:
    Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
    create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
    >
    So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
    >
    Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
    More good advice: Re: Newbie question-how does the tabular form work?  How to populate prim key? and—if based on decent database design—out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app.

Maybe you are looking for

  • Assigning YTD on Reports

    hi , I am planning to build a montly P&L report in Web analysis and Financial reporting studio. In one column i have Year To date for the current month. I want to assign the current month for this YTD via sustitution variable so that there is no need

  • Reg: COA Output for Delivery Document

    Dear Gurus, While creation of COA Output we need to enter the Delivery document. I need to find out a Material in a Delivery Document for which the Inspection results are available Is there any link between Delivery document and the Inspection result

  • Error 50 in iTunes 9.0.2

    For the past several days I am unable to access the iTunes store from iTunes. As soon as I start iTunes and click on the iTunes store link on the left, I get a "One Moment Please, Connecting to the iTunes Store...Loading" and it just sits there. If I

  • Quey return one line by parent column

    Hi, my table or view is: SQL > select * from myTable; Parent Children parent1 chil1 parent1 chil2 parent1 chil3 parent2 chil4 parent2 chil5 parent3 chil6 how write my query to have result like: parent1 child1, child2, child3 parent2 child4, child5 pa

  • Short form or Alias for the long PCD location

    Hello Everybody, We have created some iViews, pages and roles in EP. Roles have long pcd ID. like: pcd:portal_content/com.<company name>.<root folder>/<sub folder ID>/<Role name with prefix> I am using this full text to point to the correct UM role i