How to create a client in SAP

Hi..
i have lready client 800.
now i would like to create client 600.
can anybody tell me the procedure.
do it very helpful.....
Thanks nag

HI,
Log on to client 000 - run transaction SCC4. This is to create the
client.
Then logon to the new client as sap*, use transaction SCCL - this is perform
the local client copy from client 000 to your client you logged on.
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24c4e4ba111d189750000e8322d00/content.htm
Regards
Sudheer

Similar Messages

How to create new client in SAP IDES

Hi Experts,
          I have messed up with the existing 800 client in some configuration, Now i want to create a new client and want to set the configurations again, And which client we have to copy 000 or 800, because i did lot of configurations in 800 client. All my transports in 800 client are not released, if i copy 800 client will the old settings done in client 800 will be copied.
          For basis questions, where i have to post in SDN, because i did not find any section like SAP-Basis, suggest me where i have to post.
          Give me some suggestions on this.
Thanks & Regards,
Ravi.

You Need to do something like this .
Logon to the system
start Transaction SM31
Enter 'T000' as the table name
create a new entry with your preferred client number
logg off the system
Start a new gui logging on to the new client with user
'SAP*' and password 'pass'
Start transaction 'SCCL'
Use client 000 as source and your new client as target
give it the 'go'
wait some time
You can also do all these steps through the menu:
Tools
Administration
Administration
Client Administration
Client Copy
Local Copy
Hope this helps...
Abhinab Mishra

How to create a client other than 800 in sap 4.7E version?

helo can any body tell how to create another client in 4.7 version?points r assured.

Hi Sagarika,
use scc4 for creating a new client
and login to the new client that u created using sap* and pass as password
use sccl over there to do a local client copy
sccl for copying local client
scc9 for remote client copy
Merlin

How to create new client in XI

Hi all,
Can any one guide me how to create new client in XI.

Hi
To set up a new client, follow these steps
1) Create a client going in to the path
Tools->Administration ->Administration -> Client administration -> Client maintenance
or can also use TCODE scc4
2)Login into the client with
User: DDIC or SAP*
Password
For default password go thru this link
http://help.sap.com/saphelp_nw04/helpdata/en/52/67179f439b11d1896f0000e8322d00/content.htm
Regards
Arpit Seth

How To create a rebate in SAP relating to a product group (3 digit). ??

How To create a rebate in SAP relating to a product group (3 digit). ??

Client requiremnt he has sent a mail to me -:
Kim (from Benelux) wants to create a rebate in SAP relating to a product group (3 digit).
We have seen that we can make rebates on product id, product line (2digit) and on material group (4 digit).
Can you please check if this is possible? If not, is a LRFC enough?
Thanks Br
Gaurav Vazirani

How to create a client get security token in STS ?

Dear all,
How to create a client get security token in STS(security token service supported by Netweaver7.3) ?
Thanks.

Hi Sagarika,
use scc4 for creating a new client
and login to the new client that u created using sap* and pass as password
use sccl over there to do a local client copy
sccl for copying local client
scc9 for remote client copy
Merlin

"How to create new client in ABAP sneek Preview "

HI ,
Can anybody tell me how to create new client in ABAP sneek preview , i had create a new client 100 and tried to enter with Cilent 100. User : SAP* , and Password : pass. But i'm unable to log into the sap system.

Hello,
perhaps this will help you --> <a href="http://www.sap-img.com/bc049.htm">instructions</a>
And this quote from another thread:
in SAPNW2004sSneakPreviewABAP this procedure only works if the system profile parameter login/no_automatic_user_sapstar is set to 0 (and the system restarted after that), otherwise you will have a new client without any user thus useless ;-).
Regards,
Norman

How to create cross-client variant?

Hi Experters:
Can someone tell me how create cross-client variant in ECC6.0?
in 4.6, we can define the client or define cross-client transaction variant,
how to create cross-client variant in ECC6.0?
Regareds,

Hi,
In se93 there is a check box cross-client .
The Cross-client switch identifies which transaction variants are cross-client and which are client-specific. If the switch is set, the transaction variant is cross-client. If the switch is not set, the transaction variant is client-specific.
A client-specific transaction variant can only exist in the client where it was created. The field contents of the transaction variant only have to be available in the particular client. A cross-client transaction variant is available in the system regardless of which client is currently active. The field contents of the transaction variant have to be available in all clients.
http://****************/Tutorials/ABAP/TransactionVariant/Create.htm

How to create an infotype in sap ecc6.0 ?

Hi all,
I know i how to create an infotype in sap 4.7, but i am facing the problem while
creating an infotype in sap ecc6.0 version. could u plz provide me the info with screen shots how to create an infotype and how to enhace that infotype ?
Waiting for u r response.
Regards,
Ravi

Hi ,
To create OM infotype:
1. Go to SE11 and create a structure HRI9XXX (9XXX --> name of the infotype). Add the required fields to this structure and save and activate. then come out of it.
2. Go to PPCI and enter Infotype number (9XXX) and description.
3. Click create.
4. In the infotype category select details for the infotype.
5. Click create button. It should create the infotype.
6. Click on Check. A window with menu will open.
7. In that window navigate to Table Entries.
8. Under table Entries, select T777I and click on change.
9. It opens SM30. Click on Maintain.
10. Select the infotype and add information for "Time Constraint" and "Infotype Per Object Type".
11. Save.
12. Go back to check menu, see if all entries exist. Do not worry last 5 table entries. And you are done

How to comapare two clients in sap scripts

hi,
how to comapare two clients in sap scripts

Hi Anil,
Go to Tcode 'SE71' then choose menu Utilities->Compare Clients, then mention the Form name which u wish to compare, and give target client name and source client name, then execute.
Regards
Haritha

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to creat purchase register in SAP r/3 system?

Dear All,
Please tell me how to creat purchase register in sap R/3 system.

HI
I think there is no standard functionality in sap u need to develop with abaper help with proper logic
if it is for venijula s_alr_87009936 try this t.code
Thanks & Regards
Phaneendra
Edited by: phaneendra Reddy on Jun 12, 2009 9:24 AM

Proceedure of how to create a logo in SAP R/3

Dear Techie's,
Please tell me the Proceedure of how to create a logo in SAP R/3 and how to include in the ALV.
I suppose its to be included in the ALV_comentary_write function module.
Please guide me in full.
Regards,
-=Virendra=-

HI,
Please follow below steps
(1)Create a class name
SBDSV1 (TRANSACTION) --> New Entries --> Class name (SOME NAME) --> Class type (OT).
2)After entering the above details and saving, the fields Class object name fields   will be blank, make entries as shown below .
1)     Class : BDS_LOC1
2)     Class : BDS_POC1
3)     Class : BDS_REC1
4)     Object name : BDS_CONN00
3)- Now next time logging in to OAOR you can directly refer to this Class name.
4)1)     Go to transaction OAOR, give the class name created.
   2)     Give class type as OT
   3)     Give some name in object key its like sub folder
5) a) Click on create drag down standard doc types will get no. of option chose one
    b) double click on the class name in this new screen.
    c)in the below screen are, you have tabs for details,documentinfo,keywords,create, click on create TAB,
   d)By double clicking on screen you can browse the folder where image is located and select it
   e)Once the image is selected it will be stored in the folder that is created with object key
6) now double click on the image you uploaded & in below screen area select the Details tab, you will get object id,use this object id & code as below
7)form FILL_EVENTS .
DATA: wa_events TYPE SLIS_ALV_EVENT.
CLEAR: LS_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
   IMPORTING
     ET_EVENTS             = LS_EVENTS
wa_events-form = 'STD_TOP_OF_PAGE'.
MODIFY ls_events FROM wa_events TRANSPORTING FORM WHERE NAME =
'TOP_OF_PAGE'.
CLEAR: wa_events.
endform.                    " FILL_EVENTS
FORM STD_TOP_OF_PAGE.
DATA: it_listheader TYPE SLIS_T_LISTHEADER,
       is_listheader TYPE SLIS_LISTHEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_listheader[]
     I_LOGO                   = 'ZTEST' "this is object id mentioned in 6 step
    I_END_OF_LIST_GRID       =
ENDFORM.
Regards,
Raghavendra

How to create report writer in sap?

Hi Anybody,
I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
anybody please tell me with example?
Thanks
Regards,
S.Muthu.
IT Dept.

https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue

How to create a condition in sap

Hi all,
How to create a condition in sap
i want to create a condition in sap quotation. how to solve this issue please give me idea step by step.
[http://www.4shared.com/document/MQiBd3bP/screenshot.html]
Thanks & Regards
Ambrish
Edited by: ambrish dwivedi on Feb 28, 2011 12:29 PM
Moderator message: not related to ABAP development, please do some research before asking.
Edited by: Thomas Zloch on Feb 28, 2011 9:21 AM

Hello Ambrish,
Which condition are you talking about ?
is it the calculation you want to do in ur driver program or kind of routines which are used in Pricing ?

How to create a client in SAP

Similar Messages

Maybe you are looking for