How to create a cluster with a User control (.ctl) programatically using VI scripting?

Solved!
Go to Solution.

It seems that you hit the Post button before you had a chance to use the body of the message to give more detail on what you are trying to do.
Perhaps you can post whatever VI you have so far and also the user control you are trying to use.

Similar Messages

How was created the cluster with keys in example: Sim Phone.vi

Hello all
I have LV 7.1.1
I have found the example: Sim Phone.vi
And I don't know how was created the cluster with keys?
Best regards
Iskander

It's just like any other cluster you create. Put a cluster container on the front panel and insert some Booleans. the actual Booleans are on the classic controls palette. The border of the cluster is also colored transparent with the paintbrush on the Tools palette.

Do someone knows how to create a cluster with two nodes on oracle VM Ware

dear members,
can someone guide us through creating a cluster with two nodes on oracle VM. it will be nice if we can virtualiza RAC, atleast for education purposes.
Thank you all in advance

Here is an excellent article that explains how to do this:
http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/

I created new users on my mac and my music, photos, etc. is still on the administrators account. How can I share them with all users?

I created new users on my mac and my music, photos, etc. are all still on the administrators account. I tried making the other 2 new accounts administrators but that didn't work. How can I share them with all users?

Read "iTunes: Setting up Home Sharing on your computer."

How to create a table with varied number of columns?

I am trying to create a balance table. The colunms should include years between the start year and end year the user will input at run time. The rows will be the customers with outstanding balance in those years.
If the user input years 2000 and 2002, the table should have columns 2000, 2001, 2002. But if the user input 2000 and 2001, the table will only have columns 2000 and 2001.
Can I do it? How? Thanka a lot.

Why did you create a new thread for this?
How to create a table with varied number of columns?

How to create a table with editable column values.

Hi everyone,
I think this is very simple but i'm not able to find how to do this. This is my requirement. I need to create a table with n columns and 1 row initially. user should be able to enter data into this table and click of a button should insert data into the data base table. Also there should be a button at the bottom of the table to add 1 row to the table.
I know how to do the insert to database, but can anyone please let me know how to create a table that allows user to enter data and how to create a add 1 row button?
Thanks in Advance!

Raghu,
Go through the ToolBox tutorial Create Page & Advanced table section of OAF Guide.
Step 1 - You require to create EO & a VO based on this EO. This EO will be of DataBase table where you want to insert the data.
Step 2 - Create a Advanced table region. (Refer this Adavanced table section for more on this)
Step 3 - Attach this VO in the BC4J component of Adavanced Table region.
Regards,
Gyan

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

How to create a wiki with iWeb ?

Hi !
Any idea about how to create a wiki with iWeb ?
I want to make a school web page but, instead of doing it myself, I thought it would be more interesting to make every student contribute - that's the point of making a wiki ! Could anyone help me ?
Many thanks !
Cheers.
Chris.

I know Apple's tools are VERY compelling and tremendously cool to use, but, given the collaborative nature of this endeavor, you may want to look at some internet enabled tools that, by their nature, allow many users to update the content from anywhere.
Currently, if you're editing a page in iWeb, the information for that site is kept in the domain.sites folder. For several people editing the site, you would have to shuttle this file back and forth between all the users. If user A is currently editing the site, user B would have to wait until they're finished to get the file. If user A wants to make some changes, they'd have to wait until user B sends the file back to them and we haven't even got to the point of letting user C, D, or E have access to the content in order to make updates!! Add everyone else in the school and you would have to make sure this one file makes it across tens of computers without becoming corrupted and making sure that only one person is making changes at a time. This would limit the number of updates that can be handled on a regular basis (what if user M gets ill before handing it off to user N, now NO one can make updates until user M remembers where they left the content... if they didn't erase it).
However, if you're willing to severely limit the scope of what a wiki is, then you can get input from everyone and enter it with just a few users that have access to edit the content.

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

How to create OSB cluster

HI All ,
I have to create an OSB cluster across different machines .
Can I get a detailed steps of how to create a cluster across machines using node manager .
I am using osb 11gR2 .Please let me know the exact steps .

You can bundle two or more wires together using the 'bundle function' - the output is a cluster. This is the top example.
The other way is drop the constand cluster and drag any constants (like the numeric and string) into the cluster. This is the lower example in the VI snippet. You can also do this on the frontpanel - drop the cluster constant on the frontpanel and drag any controls or indicators into it. They have to be controls or indicators - you can't have a mix of both.
Also in case you are not familiar with the concept if you are working with big clusters you should 'type def' them. In LV2011 you do this by right-clicking on the block diagram and clicking 'make type def'. What this does is creates a separate file where the new cluster (or any other type of control) is saved. Then if you change the cluster - say add a boolean alogn with the numeric and string - the change happens and is propogated through your program. This stops you getting broken wires when you have two clusters wired together, you change one and not the other.
Regards,
Dave

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

How to create excise invoice with reference thorugh credit memo

Hi All,
Please provide any solution for the following qurey:
How to create excise invoice with reference thorugh credit memo

Hi murali,
i am unable to understand your requirement i think there is no like this scenario requirement for any client
if any requirement is there kindly explain detail
cheers

How to create a complaint with pre-decessor document Inovice?

Hello experts,
I need create a complaint with reference to a pre-decessor document type Invoice (apart from other types such as sales order and service order). Can someone enlighten me
1) how to create an invoice in IC Web Client and backend?
2) how to create a complaint with reference to this created invoice in IC Web client and backend?
Thanks a lot!!!

Hi Easwar
Thanks a lot for answering the question.
Yes I do have CRM Billing documents. But the problem is
a) either the billing document doesn't have Transfer to Accounting status Transferred or
b) a transferred billing document, but all items have error "Unable to offset billing item 90003458 0000000060" etc.
Do you know
1) how I can make a billing document have "Transferred" status? Pressing "Transfer to Accounting" button in the billing document overview page will only set the status to "Being transferred". And it's always being tranfered.
2) What does the error "Unable to offset billing item ... "mean? How to get rid of them?
Thanks a lot!

How to create a table with events in smartforms?

How to create a table with events view in smartforms?
It doesn't like general table with header, main area and footer.
for example:
in smartforms: LE_SHP_DELNOTE
table name is TABLEITEM(Delivery items table)

Vel wrote:
I am creating XML file using DBMS_XMLGEN package. This XML file will contain data from two different database tables. So I am creating temporary table in the PL/SQL procedure to have the data from these different tables in a single temporary table.
Please find the below Dynamic SQL statements that i'm using for create the temp table and inserting the data into it.
Before insert the V_NAME filed, i will be appending a VARCHAR field to the original data.
EXECUTE IMMEDIATE 'CREATE TABLE TEMP_TABLE (UNIQUE_KEY NUMBER , FILE_NAME VARCHAR2(1000), LAST_DATE DATE)';
EXECUTE IMMEDIATE 'INSERT INTO TEMP_TABLE values (SEQUENCE.nextval,:1,:2)' USING V_NAME,vLastDate;What exactly i need is to eliminate the INSERT portion of it,Since i have to insert more 90,000 rows into it. Is there way to have the temp table created with data in it along with the sequence value as well.
I'm using Oracle 10.2.0.4 version.
Edited by: 903948 on Dec 22, 2011 10:58 PMWhat you need to do to eliminate the INSERT statement is to -- as already suggested by others - eliminate the temporary table. You don't need it. It is just necessary overhead. Please explain why you (apparently) believe that the suggestion of a view will not meet your requirements.

How to create a cluster with a User control (.ctl) programatically using VI scripting?

Similar Messages

Maybe you are looking for