How to create a coment section that flows line to line?

I am on the last leg of this form design, and have stumbled into a dead end with my comment section. What I need to have happen in this comment section, is to have 4-5 lines (on first page "shown"), that will bleed over into the second page, line by line. Each line needs to have a bottom border so the text is not hanging out in the cold. I have tried the subform and text field, but not panning out too well for me. Any takers? Thanks!

Thank you very much - it works.
When I execute the command
"lsnrctl start"
I get the error message
"Failed to open service <OracleOraDb10g_home1TNSListener>, error 1060."
but the service is created and is running.
So the error message can be ignored.

Similar Messages

How to create a standard report that allows filtering?

Hi Guys and Gals,
Sometimes, the standard report is great because it gives the user the feeling of a grid. i.e. All of the values are editable on one page, kind of like a spreadsheet. That is sometimes very useful. But if there is a lot of data, a filtering mechanism is necessary.
So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
Allowing the user to specify the number of rows displayed would be peachy-keen too.
Thanks,
Kim
P.S. I'm running Apex 4.1 with Oracle 11g.

Kim2012 wrote:
Your idea sounds very promising, but I apparently need a nudge in the right direction. From "Create Page", I clicked on "Form" and then "Tabular Form". Why would you do this? The advice given was
create a standard report page using the Create New Page wizardi.e. go to Home > Application Builder > Application > Create Page and click Classic Report, this was suggested because the original post said:
>
So will one of you Apex gurus please tell me how to create a standard report that also allows data filtering?
>
Nothing about forms. Tabular Forms, Tabular Forms. Despite many enhancements over the last few versions, tabular forms still cause problems, especially for novices trying to go beyond their own competence and the built-in capabilities of wizard-generated tabular forms.
More good advice: Re: Newbie question-how does the tabular form work? How to populate prim key? and—if based on decent database design—out of the box you have a usable and robust application. Use an Interactive Report or a custom report template and add some CSS and you can get something a lot more powerful, flexible and better looking than any tabular form. Spend the time you haven't wasted on frustrated hacking of tabular forms adding more features and enhancements to your app.

I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

I want to know how to create a new script that can be run in batch proces in Photoshop Element 11 ?

Have a look at the menu file/process multiple files. You can choose to add your signature (or the caption) to the image and export the new files.
If that solution is not flexible enough, consider using the very affordable (12$) Elements+ add-on which offers a 'meta stamp' script :
http://elementsplus.net/v5/en/meta-stamp.htm
Otherwise, have a look at other free and good solutions like Faststone Photoresizer, Xnview...

How to create an infinite loop that cannot be cancelled?

Hi , im new around java and i need a program that keeps on repeating after each each input/uses(generally meant for different user) and cannot either stop using "Cancel" or "x" while stopping only using the "stop" button
I got a few lines of codes that look like this : String arg = "";
do{
JOptionPane.showInputDialog("hi");
}while ( arg != "y" || arg!= "Y");
and it cannot be stop with both cancel and"x"(which i wanted)
but when i used this logic with
Valid validUserInput = new Valid();
do {
userInput = validUserInput.validUserInput(a);
switch(userInput){
case 1 : validUserInput.optionOne(b);break;
case 2 : validUserInput.optionTwo(c);break;
case 3 : validUserInput.optionThree(d,e);break;
default : validUserInput.validUserInput(f);
}while(looping != "" || looping != " ");
it does not really work(while it will keep looping, it can be easily stop by pressing cancelled or "x")
So is there any logic or method that can prevent the program from being stop?
Thankyou!

elricscript wrote:
"That is helpful. It gives him a direction where he can focus his research. Namely, 'how to run a program in kiosk mode' rather than 'how to create an infinite loop that cannot be cancelled.'"
No... He already mentioned he wants to "e.g Interactive kiosk", so saying "properly kiosk it" isn't adding any new information. Rather it's just giving the person a dead point of: you're doing it wrong. Pointing out someone is wrong is not a positive enlightenment. Pointing someone in the right direction is more productive.
>"That is helpful. It gives him a direction where he can focus his research. Namely, 'how to run a program in kiosk mode' rather than 'how to create an infinite loop that cannot be cancelled.'"
No... He already mentioned he wants to "e.g Interactive kiosk", so saying "properly kiosk it" isn't adding any new information.
Yes it is. He asked how to do it using some Swing trickery, and I said it won't work. Which is true. The OP didn't already know that, clearly, hence the question. Now he does. That's pretty much new information if you ask me.
Rather it's just giving the person a dead point of: you're doing it wrong.Right. He is. However, the problem is now no longer related to Java, and not something I can help him with. You should try that: not answering questions you don't know the answer to. It's actually more helpful than posting misleading, wrong answers.
Pointing out someone is wrong is not a positive enlightenment. I'm giving basic technical help, not yoga lessons.
Pointing someone in the right direction is more productive.As already stated, I am as ignorant of how to make a Java application into a kiosk app as the OP is. What value can I add in light of that information? I began by answering a question that was not stated to be about kiosks. Once the question moved outside of my area of knowledge, I stopped trying to answer.
I notice you're not giving him any help, being more interested in admonishing others as you are.

How to create a popup window that shows detail information when press submi

hi,all
how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
how to do achieve this ?help plz .
best regards
hlee
Edited by: hlee on 2011-4-15 上午1:26

hey,vee
thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
best regards
hlee

How to create an inspection lot for each line item of the Purchase order?

Hi,
How to create an inspection lot for each line item of the Purchase order ?
In detail if possible.

Hi
please check this
[thread|Create Inspection Lot;

How to create an image banner that slides left to right with mouseover?

I need to create a web banner like the one on the following site: www.gracelandbaptist.org. I have been unabe to find anything on how to create such a banner. I believe it was created in flash but am not sure. I want my banner to work in the same fashion so that as the mouse is moved from left to right the banner will slide appropriately. Its possible that some java script might also have been used with flash. If someone could point me in the right direction I would be most grateful. Thank you.
dejawhoo

It is a Flash design and is unlikely javascript is involved with the interaction. There are probably a couple of ways to approach such a design, but if you have no experience with Flash, you will probably struggle to create it. The basics involve place the different images in a movieclip and controlling the horizontal position of that movieclip based on mouse interaction/position. THe position controls are based on what values are needed to have a particular section of the movieclip occupy the main section of the viewing area. Actionscript Tweens are probably employed to manage the position transitions.

How to create ADF region without Task Flow

I want to divide my page into different regions, but I don't want to have any bounded task flow under each region. I want to include Page Fragment inside the Region.
I find the example of creating Region using some page flow, would you please help me, how to create Region that contains only page fragment, actually the problem I am facing, I don't know what I will provide in value attribute in Region tag, that is expecting some Region Model.

Hello, RajeshBiswas.
A solution could be to generate 'MultiTaskFlow' for indeterminate number of regions or multiple regions on the same page.
It would be necessary to create a single file to define all participating 'TaskFlows' on page:
1. Select 'new -> ADF Task Flow (JSF/Facelets)'
2. May include all 'jsff' files as:
<task-flow-definition id="genericTaskFlow1">
    <default-activity>case1</default-activity>
    <view id="case1">
      <page>/pages/case1.jsff</page>
    </view>
    <use-page-fragments/>
</task-flow-definition>
<task-flow-definition id="genericTaskFlow2">
    <default-activity>case2</default-activity>
    <view id="case2">
      <page>/pages/case2.jsff</page>
    </view>
    <use-page-fragments/>
</task-flow-definition>
It should create a Managed Bean to implement the List of Task Flow Bindings:
1. Create a new Class with de following code:
    private List<TaskFlowBindingAttributes> mTaskFlowBindingAttrs = new ArrayList<TaskFlowBindingAttributes>();
    public MultiRegionBean()
        TaskFlowBindingAttributes tfAttr = new TaskFlowBindingAttributes();
        tfAttr.setId("region1");
        tfAttr.setTaskFlowId(new TaskFlowId("/WEB-INF/.../ADFTaskFlow.xml", "genericTaskFlow1"));
        mTaskFlowBindingAttrs.add(tfAttr);
        tfAttr = new TaskFlowBindingAttributes();
        tfAttr.setId("region2");
        tfAttr.setTaskFlowId(new TaskFlowId("/WEB-INF/.../ADFTaskFlow.xml", "genericTaskFlow2"));
        mTaskFlowBindingAttrs.add(tfAttr);
    public List<TaskFlowBindingAttributes> getTaskFlowList()
        return mTaskFlowBindingAttrs;
2. Define this new class into the 'adf-config.xml' file as Managed Bean with 'pageFlow' scope.
<managed-bean id="__1">
    <managed-bean-name>managedBeanName</managed-bean-name>
    <managed-bean-class>className</managed-bean-class>
    <managed-bean-scope>pageFlow</managed-bean-scope>
</managed-bean>
At the page definition, add a MultiTaskFlow inside <executables> tag:
    <multiTaskFlow id="multiTaskFlow1" taskFlowList="#{pageFlowScope.multiRegionBean.taskFlowList}"
On the page, insert regions in the desired locations. For example:
    <af:group id="g2">
        <af:panelAccordion id="pa1" inlineStyle="width:50%; height:400px;">
                <af:showDetailItem text="showDetailItem 1" id="sdi1">
                <af:region id="r1" value="#{bindings.multiTaskFlow1.taskFlowBindingList[0].regionModel}" >
                </af:region>
                </af:showDetailItem>
        </af:panelAccordion>
        <af:panelAccordion id="pa2" inlineStyle="width:50%;">
                <af:showDetailItem text="showDetailItem 1" id="sdi2">
                <af:region id="r2" value="#{bindings.multiTaskFlow1.taskFlowBindingList[1].regionModel}" >
                </af:region>
                </af:showDetailItem>
        </af:panelAccordion>
    </af:group>
Reference: 21.10 Configuring a Page To Render an Unknown Number of Regions

How to create a smart folder that only selects from a specific directory?

I am trying to create a smart folder that lists all my iPhoto original content in the last few months. I want this so that my wife can connect into the smart folder over the LAN when copying specific photos to her PC.
I am have trouble working out how to restrict the search to only those files that exists in the iPhoto directory. When I look at info for a photo is states "Where: /Users/Shared/iPhoto Library/iPhoto Library/Data/2009/....etc etc".
However if I add an filter for "Where from" begins with "/Users/Shared/... etc etc" it returns nothing. Is there a way to do this?

Find the iPhoto library file.
Right click -> Show package contents.
Double click the Originals folder.
Type anything in the Search box at the top of the Finder window.
In the top of the Finder window, click "Originals".
Click the + (plus) sign next to Save.
Select Kind is Image.
Click the + (plus) sign again.
Select *Created date* is *within last 3 months* (or whatever you want).
Go to the search box and delete what you typed. Don't hit the X to delete the search text.
Now save the smart search.
This is saved in ~\Library\Saved searches. Copy or move it to the desktop where your wife can get access to it.

How to: Create a master form that auto-fills data into other pdf forms?

I hope someone can please help me. I have about 15 PDF forms that all require similar data entry (name, address etc). Can I create a master form that we fill in once per client, and then auto-fill in the matching data on the 15 forms?
I am not looking for an online solution as the information is highly sensitive.
I have already created a form in Acrobat X Pro with the 'master data', and created the (15) forms with identically named fields. How I link the forms now to the master, I cannot figure out (after much searching).
I have read similar questions on the same topic but have not found any answers. I hope this time someone can please help.
Many thanks in advance.

Thank you! I had just figured out how to export the data from the master as an FDF file and then import it to the other files. I'm afraid I don't understand scripting to automate the process across multiple files. To you mean with java script?
I've also thought about combining the forms, once we know which ones the particular client will need. I have to see how it works in practice for my colleagues who will be using them.
Thank you again.

How to create a radio button that changes colors

I'm using Acrobat X and ID CS5 on Mac OS X.
A couple of years ago someone on the forums explained to me how to create a button that changes color with each click. You can view a sample PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle.pdf. They gave me the document JS and showed me how to set the properties of the button. I've integrated the button into a particular series of PDF forms and it's worked out very well.
Now I would like to do the same thing, but using a circle instead of a square. Can anyone tell me the best way to do this? Can I somehow set a radio button to cycle through colors in the same way? I design my forms initially in ID CS5 and then activate and format the fields in Acrobat X. I've tried using circles instead of squares in my ID document, but when I export to an interactive PDF, they're converted to squares.
Any ideas?

I understand how to make buttons cycle through colors-- the problem I'm having is that I'm trying to figure out how to make a circular button cycle through colors. When I export my ID document to PDF, my round button maintains it's original appearance, but when I click on it to cycle through the colors, it behaves like a square (see new PDF at https://dl.dropboxusercontent.com/u/52882455/colorcycle2.pdf).
If I use a radio button, I can get it to cycle through colors, but I don't want it to have a black dot in the middle. Is there a way to format the radio button to not show the black dot when clicked?

How to create an OAF page that does not need login to access

We have a lot of Oracle users, and everyday there are some users forget there username or password and need reset. I really want to use a web page to let them reset their passwords automatically. The web page will call the API to reset password if it found the user request is legible.
So based on the situation, the users should not need a login to get to this page, can I do this using OAF?
And idea is welcome, thank you for your help!
-Bill
Edited by: billzheng2004 on Jun 18, 2009 12:12 PM

Srini,
Thank you for your response, I think we need to go back to my original question, is it possible to create an OAF page that does not need login, how can I do that.
I think I said too much and led us to go to a different direction I did't want to. But I am still glad to texplain why I need a custom password reset process, that is all about business requirement, here it is:
----I am not sure that "company issues" (such as what you described) can be solved by software -
I already have a solution for that. Create a custom OAF page, ask user to input his SSN / Date of Birth.... then I can figure out what his real username easily. And I can reset his password as his SSN or something which only this particular user knows. Then he can login.
----you may have to impart training to end users.
As I mentioned, most of our users use only Benefit self service. They only login several times a year, even they are trained this year, most of them will forget next year, this is just human nature. And because the nature of our business, thousands of employees may change at the end of a year. It does not make any business sense for company to prepare trainers every year.
----In any case, the functionality you require is already built into the product.
I guess the reason most companies hire Oracle Developers is that some functionality Oracle Applications provide is not exactly the companies needed. When there is Oracle Apps product, there is alway customization.

How to create EP-iView (SPS19) that shows BI planning template (NW2004s)

Hi,
we have an EP6 SPS19 with many reports coming from a BW system. Now we migrate the BW from 3.5 to NW2004s (7.0) to use integrated planning. We also implemented the BI Java which is required for planning. Now I wonder how to create iViews on our EP6 system which points to these kind of reports. Which kind of iView do I need? Do I have to create a system object for the BI Java instance? A system object that points to the ABAP instance is already there, because we already have many iViews to reports from the ABAP stack.
I would appreciate if one points me to a good documentation.
Thanks in advance,
Uwe

Hi Uwe,
If you have designed the templates in Web Application Designer then you can publish the template to the portal. You would get an url pointing to the template in the portal. You can then create an "URL iView" in the portal pointing to the url.
You can also create Bex Application iViews from the published templates.
You would not need to create a new "System" object if there is already one pointing to the BI ABAP system.
This link points to publishing BI Content to Portal
http://help.sap.com/saphelp_nw70/helpdata/en/43/6ee85d99506fcfe10000000a1553f6/frameset.htm
Thanks,
Abhishek

How to create an e-mail that contains a graphic flyer notice

I need to create an e-mail poster advertisement for a
recreation area that
will be sent out to shareholders. I need to do this as an
extra-curricular
activity for work. Does anyone have any suggestions on how I
would do this?
Would I create the web page and then send the web page in an
e-mail. I need
the info to show up directly, not
through an attachment. Also, once created, this will be sent
out to
shareholders. How do I save this file to disk( in what format
)so that it
can be sent out by my boss. Any suggestions would be helpful.
Thanks
jmick

Thanks for your assistance. I went to mailchimp and found
some helpful
information. I also found another program and created a
presentable draft
that I have forwarded on. Thanks again.
jmick

How to Create An Arrow Indicator that Fills

Hello,
I'm trying to create an Arrow indicator that can fill. I've taken a slide indicator put some flat decoration shapes over it to make is look like an arrow. This works, but I have to created one for each direction UP, DN, Left, Right, for I can figure out how to rotate it.
Attachments:
ArrowIndicator_Horz.vi ‏6 KB

You already gave the solution yourself:
JordanJ wrote:
...but I have to created one for each direction UP, DN, Left, Right, for I can figure out how to rotate it.
Yes! You have to create one for each direction
Of course you could also use a picture indicator and just draw what needs to be drawn. You could also customize some classic controls. It's not quite the same, because the arrow tips move now. See attached examples.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ArrowIndicator_HorzMOD.vi ‏9 KB

How to create a coment section that flows line to line?

Similar Messages

Maybe you are looking for