How to create a configuration file for open ldap.

hi,
I have installed open ldap on my machine. Now I want to configure it to NetWeaver.
For this, I started configuration through configtool utility of NetWeaver. While configuring, we need to select or upload configuration file. But now as it is open ldap we need to write our own config file.
I tried it by selecting dataSourceConfiguration_ads_deep_readonly_db.xml as a configuratio file. it shows successful test connection but the user which I have created is not appearing in UME store.
Does any body having solution for this?
I am trying to solve this problem from two days. I really appriciate one who will sove this problem

Well the configuration file you chose does not allow users created in NetWeaver to be created in the LDAP. That's why it's a "readonly" configuration. I would guess that you need a custom configuration file specifically for open ldap.
This should help get you started on a custom configuration file:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/14d43f2dd44821e10000000a1550b0/frameset.htm
Then again, if the only problem with the .XML file you chose is that you can't write to the LDAP, give the dataSourceConfiguration_ads_writeable_db.xml configuration file a shot.

Similar Messages

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

How to create a Batch file for java application ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

[http://static.springsource.org/spring-batch/]
Assuming you want to develop a batch application rather than actually just create a .bat file ..

How to create the exe file for java project.

How to create the exe file for java project.
am done the project in java swing , i like to create the project in exe format, so any one help for me,
send the procedure for that.
thanking u.

How to create the exe file for java project.Have you ever heard of google? I pasted your exact "question" into a google search:
http://www.google.com/search?q=How+to+create+the+exe+file+for+java+project.
and got several useful links.
Better search terms might yield even better results.
Sheesh.

How to create a password file for executing psadmin command to deploy portl

how to create a password file for executing psadmin command to deploy portlet

What you have done is perfectly right. The password file doesn't have anything else apart from the password
for example in your case
$echo password > /tmp/password.txt
However I remember that in windows install, the Application server used to wait for a user's input when a deploy was to be done for the first time. So Can you read the Release notes or the Readme file which has come with windows.
The solution was,
manually use asadmin command of application server to deploy some war (any webapp will do), at this time, a question will be prompted to accept a certificate. once this is done, deploy portlet should work fine!!!
HTH

How to create the exe files for java application

How to create the exe file for java application?
got any software to do that?
Thanks

In terms of converting java applications into exe files, there are 3 schools of thought:
1) Instead of converting it to an exe, convert it to a jar file. Jar files are more portable than exe files because they can be double-clicked on any operating system. The caveat is that a Java interpreter must be installed on the target computer for the double-clicking to work.
http://developer.java.sun.com/developer/Books/javaprogramming/JAR/
2) Create an exe launcher that, when double-clicked, attempts to find a Java interpreter on the local computer and launches the Java application. The exe file is still double-clickable but whether your java application runs depends on whether a Java interpretor is installed on the target computer.
http://www.sureshotsoftware.com/exej/
http://www.objects.com.au/products/jstart/index.jsp
http://www.duckware.com/products/javatools.html
http://www.ucware.com/jexec/
http://www.rolemaker.dk/nonRoleMaker/javalauncher/
http://www.jelude.cjb.net/
http://thor.prohosting.com/~dfolly/java/index.html
3) Create an exe launcher that bundles a Java interpretor. Same as above but when the exe file is double-clicked, it searches for a Java interpreter and if one is not found, it installs one on the target computer. The caveat is that the exe file would have an overhead of 10 MB in size for the interpreter.
http://www.excelsior-usa.com/jet.html (evaluation version available)
4) Convert the Java application into a native exe file. The caveat is that if you use Swing for your GUI, it won't be converted. Also this option is still somewhat experimental.
Can't think of any free options right now.

How to create bulk configuration files from a template for staging?

Hello,
We have created a sample configuration for ISRG2 2901 Router. The sample configuration is long, and with copy/paste it is possible to skip some lines, and it is difficult to ensure the configuration of every device is standardized due to this error possibility. What we are trying to achieve is first create a template from this sample configuration file, and then create configuration files for each device seperately and automatically. After creating this configuration instances, we want to be able to distribute the configuration files (and possibly the ios) to the devices during the staging phase. Since there are about 1000 2901 routers, creating configuration files is important?
From searching we have found the following tools:
1) CCE (Cisco Configuration Engine): This tool seems to be very efficient for distributing the created configuration files. We may use the serial number of the device, and it provides almost zero touch provisioning of the configuration files to the devices. Creating the configuration file from the template seems to be manual, i.e enter the ip addresses of the interfaces, the routing tables one by one for each device. How can we use velocity template for device configs?
2) Ciscoworks LMS Prime: It is possible to create a baseline template for the devices, and after getting the backup configuration of the routers, it is possible to compare the actual configuration of the device with the baseline template, and understand if there is any difference with each other. This is indeed very useful in order to keep the configuration standardized, we again could not find a way to create bulk configuration files from the baseline template.
3) Solarwinds Config Generator: This tool is useful for creating a configuration file from a template, but again not for automatically creating configuration files, and needs manual intervention.
4) Excel Macro: It seems that some people have achived to automatically create configuration files with using an excel macro, but we could not find a procedure or tip of how to achieving this.
5) Pearl or TCL/TK Script: Again since we are not software developers but from networking field, it is difficult to achieve a working form of this scripts or codes due to to lack of documentation and development experience.
So our problem comes down to creating a template from a sample configuration, and creating bulk configuration files from the template. Is there a specific tool or procedure to achive this purpose?
Thanks in Advance,
Best Regards,

Hi,
Try this one http://www.gen-it.net
Regards,
Stuart

How to create different log files for different users in log4j

I want to create different logs for different users, using different appenders for each user so that logs are created in his file only.
Confusion:How to direct them to different files in my logger class

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

"dtutil", how to tell which configuration file for packages using after deployment?

Hello All,
Trying to achieve this feature,
Using DOS command to automatic my deployment process--glad I found dtutil. However, it doesnt give you any chance to identify which configuration file to be used by SSIS packages after deployment.
Deployment Method: file deployment
Configuration sued: XML file and SQL Table. IN XML file, it tells which DB connection for packages to look up the configuration table.
Who can share some thoughts on this?
Derek

It is NOT about sequence.
It is about how to point which configuration file to be used by deployed packages as during the "dtutil.exe"
deployment, you dont have chance to identify which physical location confg files to be used.
Derek
That you do only at the time of execution of packages. By default it uses configuration settings created at design time within the package. If you want to override it, you can use \Configfile switch of dtexec for that. You can also set explicit values for
properties using /SET switch
http://technet.microsoft.com/en-us/library/ms162810(v=sql.105).aspx
See this to understand how configs are applied in runtime
http://technet.microsoft.com/en-us/library/ms141682(v=sql.105).aspx
and this to understand behaviour difference in ssis 2008
http://technet.microsoft.com/en-us/library/bb500430(v=sql.105).aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to create a .jar file for the BPEL project

hi all,
how can i create a .jar file for my BPEL project, i am trying to deploy the project but getting an error :
"Error: [Error ORABPEL-10902]: compilation failed [Description]: in "C:\OraBPELPM\integration\jdev\jdev\mywork\Workspace_BPELDemo\BPEL_Report\BPEL_Report.bpel", XML parsing failed because "". [Potential fix]: n/a. "
and when doubel cliking on this error Jdev take me to the beginning of the ".bpel" file.
I 'm really stuck in here i am not able to deploy the process!
Thanks,
Rana

Rana:
If you haven't already, I would post this question in the BPEL forum. I would expect a much better turnaround there.
Johnny Lee

How to create an XML File for Gantt?

Hi Everybody.
I need a Gantt in Web Dynpro ABAP. I need it for the boss to do a Forecast for Vacation. I Hope this is understanding.
Did Anyone know how can i create a XML File for the Gantt at runtime?
Thanks
MSi

Hi Marcus,
the following link is to the JNet/JGantt developer doco
[JNet/JGantt Developer Documentation|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb]
included in this is the:
[Schema for XML|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/lw/webdynpro/jnet_jgantt%20developer%20documentation/schema/xml-spy/jnet-schema.html]
You can use this to build XML to represent a gantt like chart.
I did this to build XML to represent employee avaliablity - although we fronted the gantt through WD Java not ABAP - the java applet called is the same (I believe).
Don't underestimate the work required to tweek your data into a decent layout. It took me days.
There may be tools/api to help generate the XML - I don't know of them - I'd look forward to seeing any other replies to this thread from people who have used/built any. An example of a class that generates JNet XML - CL_SPI_UI_JNET - but this does not seem to be a Gantt display.
Cheers,
Chris

How to Create a Dump file for a MaxDB database

Hi
I have to create a dump file for a database in MaxDB.
IN MaxDB How to Create a DataBase and How to Connect to
MaxDB.

Hi,
what exactly do you mean with a 'dump file'? Are you referring to a backup?
You should be able to find your answers here: http://dev.mysql.com/doc/maxdb/maxdb_faq.html.
If not, please let me know.
Regards,
Roland

How to create a dll file for lab view?

Hello
I want to create a DLL file for LabView. Can anyone help me in this issue?
Regards
Vivek

Please explain.
Do you want to create a dll in another language (which one?) for use in LabVIEW or do you want to create a dll out of your LabVIEW code?
LabVIEW Champion . Do more with less code and in less time .

How to create a .exe file for a java application

Hi, I want to create a .exe file for a java application I am developing so that I can schedule it to run at a particular time using Windows Scheduler on WinNT. Is there any way to accomplish this? Or is there any other way in which a Java application can be scheduled to run at a particular time on Windows everyday?

Create a .bat file and run that. Just have, in the .bat file:
java YourClassName Alternatively, you can use javaw YourClassName (without *.bat, just put it into Windows Scheduler like suggested above).
using javaw won't pop up any window...

How to create a configuration file for open ldap.

Similar Messages

Maybe you are looking for