How to create a connection between CRM and R73??

Hi, I have a problem. I am working with CRM and in my program I have to access to some tables in R/3 to get some data, I have created a RFC function to get those data (it is created in R/3). In CRM there is a report that use that function but when I use it I get a Dump. I think it is because the connection are not established. I know that I have to go to the SM59 but I don't know how and where I have to create, and I don't know which do the Destination parameter must be.
If anybody knows how to solve it...
Thanks in advance

Alejandro,
Please go through this link below
http://help.sap.com/saphelp_erp2005/helpdata/en/89/45aad99715462abdf09ec503e151e7/frameset.htm

Similar Messages

  • How to establish the connection between crm and r/3

    Hi,
    Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
    Could any one tell me where to find adapters and plugins for this.
    Thanks in advance.
    Ajey

    Hello Ajey,
    in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
    B01: CRM Generation
    C71: CRM Connectivity
    B09: CRM Replication
    from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
    Regards
    Gregor

  • How to create a connection between SAP BPC 10.0 to SAP BOBJ

    Hi friends,
    My client want see the reports in BOBJ which are built in SAP BPC. How to create the conncetion between BPC and BOBJ.
    1.Is there any guide to create such connection ?
    2.how the data feed to BOBJ reports?
    please help me ASAP.
    Regards,
    Saida Reddy G

    Hi,
    Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5?QuickLink=index&…
    How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation
    Hope it helps...
    regards,
    Raju

  • Need to establish Connection between CRM  and   Virtual Directories.

    Dear All,
    I am working for Telecom project.
    I have one requirement that we need to establish Connection between CRM and   Virtual Directories.
    This is existing in Access management system.( SAP EP environment )
    The basic requirement is, with  SAP EP environment we are integrating 8 different application. But for all this Application we have a one more system called Access management system (like Basis in Sap). This will validate the user access and BP(Business Partner ) data for users who logon to a different respective application. For all this applications Company data (Master Data) has to provide from CRM and the changes took place for Company data in CRM will be updated in to Virtual Directories .For this service we need to establish Delta mode connection between SAP CRM and Virtual Directories.
    Which is existing in Access management system .
       Do we have any standard connectors from SAP CRM to connect and who we can achieve this .
    Please let us know..Certainly there will be a reward points
    Thanks & regards.
    BNP

    Try posting this question on the BPA Suite forum - http://forums.oracle.com/forums/category.jspa?categoryID=194

  • How to create shared folder between mac and windows

    how to create shared folder between mac and windows

    Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

  • How to create database link between oracle and SQL Server

    Hello Everyone,
    Here i have Oracle Database 9i and SQL Server 2005 databases.
    I have some tables in sql server db and i want to access from Oracle.
    How to create a database link between these two servers
    Thanks,

    Thanks for Everyone,
    I was struggle with this almost 10 days....
    I created Database link from Oracle to SQL Server
    Now it is fine.........
    Here i am giving my servers configuration and proceedure how i created the db link...@
    Using Generic Connectivity (HSODBC) we can create db link between Oracle and SQL server.
    Machine (1)
    DB Version : Oracle 9.2.0.7.0
    Operating System : HP-UX Itanuim 64 11.23
    IP : 192.168.0.31
    Host : abcdbt
    Machine (2)
    Version : SQL Server 2005
    Operating System : Windows server 2003 x86
    IP : 192.168.0.175
    Host : SQLDEV1
    User/PW : sa/abc@123! (Connect to database)
    Database : SQLTEST (exsisting)
    Table : T (“ T “ is the table existing in SQLTEST database with 10 rows)
    Prerequisites in Machine (2):
    a)     Oracle 10g software
    b)     User account to access SQL Server database (sa/abc@123!)
    c)     Existing SQL Server Database (SQLTEST)
    d) Tables (testing purpose) (T)
    Steps:
    1)     Install Oracle 10.2.0.1 (Only SW,No need of database) *(Machine 2)*
    2)     Create a DSN where your windows Oracle 10g SW resides *(Machine 2)*
    Control panel >> Administrative Tools >> Data Source (ODBC) >> System DSN ADD
    You can follow this link also.....
    http://www.databasejournal.com/features/oracle/article.php/3442661/Making-a-Connection-from-Oracle-to-SQL-Server.htm
    I created DSN as
    DSN name : SQLTEST
    User : SA/abc@123! (Existing user account)
    Host : 192.168.0.175 (machine 2)
    Already I have 1 database in SQL Server with the name SQLTEST
    You can create DSN with different name also (not same as db name also)
    3)     Create a hsodbc init file in $ORACLE_HOME\hs\admin *(Machine 2)*
    Create init<DSN NAME> file
    Ex: initSQLTEST
    Copy inithsodbc to initSQLTEST
    And edit
    initSQLTEST file
    HS_FDS_CONNECT_INFO = SQLTEST    <DSN NAME>*
    HS_FDS_TRACE_LEVEL = OFF*
    save the file....@
    4)     Configure Listener.ora *(Machine 2)*
    LISTENER_NEW =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
    SID_LIST_LISTENER_NEW =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = SQLTEST) *+< Here SQLTEST is DSN NAME >+*
    (ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
    (PROGRAM = hsodbc))
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = G:\oracle 10g\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc) )
    :> lsnrctl start LISTENER_NEW
    5)     Configure tnsname.ora *(Machine 2)*
    SQLTEST11 =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.175)(PORT = 1525))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = SQLTEST))
    (HS=OK)
    :> tnsping SQLTEST11
    If No errors then conti….
    6)     Configure a file *(Machine 1)*
    Cd $TNS_ADMIN ($ORACLE_HOME/network/admin)
    Create a file
    $ vi TEST_abcdbt_ifile.ora
    something=
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST =192.168.0.175) (PORT=1525))
    (CONNECT_DATA=
    (SID=SQLTEST))
    (HS=OK)
    $ tnsping something
    $ sqlplus system/manager
    Your connected to Oracle database *(machine 1)*
    create database link xyz connect to “sa” identified by “abc@123!” using ‘SOMETHING’;
    select * from t@xyz;10 rows selected.
    Thanks,
    Edited by: ram5424 on Feb 10, 2010 7:24 PM

  • How to create ODBC connection between Oracle 10g and MS SQL Server

    Hi,
    Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
    Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
    The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
    Please help
    Thanks
    Shanil

    Hi,
    If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
    Heterogeneous Connectivity
    If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
    How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB     (Doc ID 191368.1)
    As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
    SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
    Hope it helps,
    Greg

  • How to create a connection between EP-Portal and BW system

    Hi friends ,
    Can you pl expalin me How ro connect EP to BW ,I have created an Iview in the portal to get some BW data using BSP application .How to assign Iview to system object ? and what are parameters i need to give in the system object .
    Thanks,
    Sunitha Reddy

    Probably better asked in the PORTAL forum. But anyways...
    Create iView for BI.
    Assign BI iView the ALIAS of your BI system (this assumes you created a BI system object previously and assigned it an alias)
    Just that easy.
    If you are on BI 7, then your BI might have it's own portal and you can create a federated portal network between BI and your portal. It works GREAT and is easy as cake.

  • How can I get connection between VC and back end ABAP system

    Hi, I'm developing the kits in the VC platform, and I need to access the back end system designed by ABAP. For example, the system provides some public functions(not web services), and I hope when I click the "search" button, the VC front can call the remote functions and get the data from the back end system. In addition to that, the most important is I must keep the connection real-time. How can I do it?

    Thanks for your help. At present, my VC version is 7.1.4 which isn't installed in the portal server but in local machine, and I'm new in the VC. What I want is when I click the "search" button(in the properties pannel), I can get the data from the remote server. I know the VC 6 provides similar functions, but the current version doesn't. Could you explain the details of how to get and keep the connection between them? Thanks so much.

  • How to create UD Connect Source system and datasources.

    I am currently working on BI 7.0 and I need to report on Standard Queries on xPD (Extended Applications Product Defination)
    In the BI Cont library it states the data for this application is fetched using UDI rather than Table Extraction. Can anybody please help me with documentation on Steps for creating a UD connect Source system and UD Datasources and how I should proceed.
    Edited by: Amit  Pal on Feb 19, 2008 6:17 AM

    Hi,
    Pls chk this link;
    http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-udc-jdbc%20universal%20data%20connect%20jdbc%20interface.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11cfa83d-0401-0010-9597-d3b7f487d72d
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f094ba90-0201-0010-fe81-e015248bc5dd
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
    http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/frameset.htm
    hope these helps,
    Regards
    CSM Reddy

  • Create JNDI Connection Between MSAcess and BIPublisher

    Hi,
    Can Anyone guide me in establishing the connection between MSAcess database and BIPublisher.
    I had tried by creating the JNDI where i had the details DSN and i am not sore of JNDI name. What can i provide for JNDI Name?
    Any pointers on this is of Great Help!!!!!!!

    Please post your question here:
    BI Publisher
    This is the BI Apps forum.

  • How to set up connection between S and C

    I want to realize a chat between server and client.
    on both side ,there is a textArea to get the information to send to the other.
    I know the socket is must be used,but how to set up the data source(from textarea or textfield),and how to store the data?
    can some one tell me how to do this?
    thanq!

    So what are you saying you dont know how to use the textarea and textfield?Cause it is ez to convert that code that dunedinhigh gave you from console to a gui like what you want I think.So here is a link that shows you how to use text component.You learn this then you can put 2 and 2 together.Also check out the java tut page.
    http://java.sun.com/docs/books/tutorial/
    http://java.sun.com/docs/books/tutorial/uiswing/components/simpletext.html
    good luck

  • Newbie Question: How to create a gap between header and wrapper?

    Hi everyone,
    My wife and I are trying to figure this one out. We have tried double clicking on the wrapper in the "All Rules" menu, adding a top margin to the wrapper in the "Box" submenu, as well as changing the positioning of the wrapper in the "Positioning" menu, but this made both the wrapper and header move down. How to I make the wrapper move down while leaving the header in place, so as to create a gap in between the two? Thansk so much!

    As snake states, a link to the page would be best. Usually margin top is what you would set. So if your wrapper is below your header, you would set the margin top in the css for the wrapper to be what you want the gap to be.
    Usually a wrapper or container is what is holding the whole site, but this doesn't sound the case here. So something like this in your css.
    .wrapper     {
        margin-top: 25px;
    You would probably add the margin-top:25px to the existing css for that page.
    If you can provide a link to the page, the very helpful people would be able to solve this for you rather easily.
    Jim

  • How to create Customer Group in CRM and use reminder script

    Dear Sir,
    I would like to set the group of customer in CRM , Such as , customer 1 is in Group A , Custoemr2 is in Group B.
    So, in Interaction Center : CIC0 , I will do the reminder scipte, there script for Customer Group A , anothere script for Customer Group B. How can I do that?
    Please kindly advise.
    Thanks and best regards,
    Vimol

    hi.
    define the variable using transaction code CIC2
    then assign that vaiable in text using transaction code CIC9
    then assign the text to reminder scipting using transaction code CIC1.
    If helpful reward me

  • OBIEE -- How to create a filter between current_date and 31 days pass

    Hello guys
    I was trying to put a filter on the date column and filter between timestampadd(sql_tsi_day,-31,current_date) and current_date
    I was successfully able to define both field on sql expression of the filter and I selected "is between"
    when I put this date column with measures and other columns then run report, I get a different error:
    State: HY000. Code: 10058. NQODBC SQL_STATE: HY000 nQSError: 10058 A general error has occurred. nQSError: 42043 An external aggregate is found in an outer query block. (HY000)
    SQL Issued: SELECT Product."Brand Name" saw_0, "Up Level"."Trial - level 12" saw_1, "Year"."Transaction Year" saw_2, "Year"."Transactoin Month" saw_3, "Year"."Transaction Date" saw_4, tranSale.count_of_transactions saw_5, Avg(tranSale.count_of_transactions by "Up Level"."Trial - level 12", "Year"."Transactoin Month", Product."Brand Name") saw_6 FROM tranSale_cube WHERE ("Up Level"."Trial - level 12" IN ('0', 'Product Upsell')) AND ("Year"."Transactoin Month" >= '2009 Feb') AND ("Year"."Transaction Date" BETWEEN timestampadd(sql_tsi_day,-31,current_date) AND current_date) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4
    I believe it must be something with the essbase that is not serving OBIEE well. Because I tried the same filter on a different environment not having essbase, it return me the right results..
    Could anyone help?
    Thanks

    Another example to look at to see historical data for x number of years in the past from current year can be found in this blog:
    http://oraclebizint.wordpress.com/2008/03/11/oracle-bi-ee-101332-rolling-yearmonth-and-date-filters-moving-window-filters/

Maybe you are looking for