How to create a connection between EP-Portal and BW system

Hi friends ,
Can you pl expalin me How ro connect EP to BW ,I have created an Iview in the portal to get some BW data using BSP application .How to assign Iview to system object ? and what are parameters i need to give in the system object .
Thanks,
Sunitha Reddy

Probably better asked in the PORTAL forum. But anyways...
Create iView for BI.
Assign BI iView the ALIAS of your BI system (this assumes you created a BI system object previously and assigned it an alias)
Just that easy.
If you are on BI 7, then your BI might have it's own portal and you can create a federated portal network between BI and your portal. It works GREAT and is easy as cake.

Similar Messages

How to create ODBC connection between Oracle 10g and MS SQL Server

Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
Shanil

Hi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to create database link between oracle9i database and oracle10g

How to create database link between oracle9i database and oracle10g
oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
Please help me on this

For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
Connections between 10.2 and 9.0.1 was never been supported.
Cheers !!!!
Bhupinder

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

Connection Between SAP GTS and Legacy systems

Hi GTS Experts,
Could you please let me know how to connect between SAP GTS and Legacy systems.
This is for transfer of Customers, Vendors,Materials(Products in GTS),Transaction Data.
Could you please provide any documentation on this and is it PI team will do or functional guy.
One more question:
Customer created a sales order with sold to and ship to(both contains same address) in legacy system.
Then it will be sent to SPL screening in GTS.
Now he will change ship to address and this should not be passed to SPL screening-- how to do this.
Regards,
Murali

Hi Murali,
Apart from what Dave mentioned as above, although there is no such document available apart from SAP Standard content document but its something that is very standard to other modules as well.
Actually, you need to have a middle ware like SAP PI or any non SAP Product between SAP and Non SAP Legacy system. Also, mapping should be defined well in advance in this. Then it will also involve the EDI at the SAP GTS system end and Web skills( or applicale connection skills) at the Legacy system end to ensure appropriate mapping and interchange of realistic data.
Here, I would like to know if your legacy system had already some SAP system connected to it?.
Regards,
Aman

How to create a connection between SAP BPC 10.0 to SAP BOBJ

Hi friends,
My client want see the reports in BOBJ which are built in SAP BPC. How to create the conncetion between BPC and BOBJ.
1.Is there any guide to create such connection ?
2.how the data feed to BOBJ reports?
please help me ASAP.
Regards,
Saida Reddy G

Hi,
Check http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5?QuickLink=index&…
How to Use the EPM Connector to Visualize BPC Data via Dashboard Design (aka Xcelsius) | planingandconsolidation
Hope it helps...
regards,
Raju

Creating a connection between the GUI and a program's back end

I have created a program (over 50 classes) and am currently a little confused as to how I should connect the back end of my program (the real functionality) to my front end (the GUI). Currently I am thinking about using a list of event listeners in my back end that will announce when certain events have completed and thus front end can handle the updates accordingly.
But I want to ensure that the back end doesn't "know" about the front end. In other words, I would like to ensure that the back end and the front end are as independent/modular as possible.
Can anyone make some suggestions besides event listeners?
Thanks,
Timmers

From what I am able to ascertain from your post, you would advocate using EventListeners in the back end (in same VM) to inform the GUI of changes?
Is this the commonly accepted way of communicating your back end functionality to your front-end (GUI)?
I've read that all EventListeners are part of a single thread. So what happens if two events occur simulataneously in the back-end. Do those events get queued or do some of them get lost?
Thanks,
Tim
If the back-end changes state asynchronously to the
front-end GUI (ie does work in background threads and
then notifies the front-end when something happens),
then you should make it send events when this happens.
The basic concept is the same for CORBA, RMI, JINI,
or running everything in the local VM.
To do this you define a set of events (or maybe you
can use the java.beans.PropertyChangeEvent) and
listener interfaces. The front-end then registers to
receive events (probably via an addXXXListener()
method in the back-end). You would have to have a
class (or classes) in the front-end that implemented
the event listener interfaces to receive the events.
If you are using a distributed technology (CORBA, RMI,
JINI, ...) the concept is the same, but the event
mechanisms are slightly different.
To notify the back-end of state changes in the
front-end you probably can just do plain old method
calls from the front-end to the back-end.

How to make optical connectivity between Catalyst 4948 and 10K router ?

Hi,
I am Ratheesh P D, network Manager of one project in Motorola. We have one catalyst 4948. Its going to get one 10K router. Our requirement needs optical connection between these two. The document of 4948 says, its compatible with 1000BaseX SFP and 10K is with 1000BaseSX SFP. Could you please tell me how to make these two compatible?

For information regarding the optical connectivity in 4948 cat switch follow the url ,
http://www.cisco.com/en/US/products/ps6021/products_installation_guide_book09186a008023fa89.html
For more information on h/w capability and connectivity of 10 k routers follow the url ,
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/index.htm

How to make HTTP connection between a midlet and a php server?

As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

Can you be a little more specific on what you really want.
When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
Here are quite a good ammount of examples of how you can do it
http://www.java2s.com/Code/Java/J2ME/Networks.htm
They aren't PHP based examples, but you have can an idea of how it can be done

How to create automatically users&roles in CUA and child systems

Hi,
i have a CUA on a 2 chlid R/3 systems (test and training) and 2 portal systems (test and training).
i need to create a web application to create automatically users test and users training in CUA and see them in the R/3 chlid systems and at the same time to create autmatically a roles in CUA and R/3 chlid systems for those users (we sppose that the role is already stored in a table).
are there any standard BAPI or Funcion modules that can do this job?
is the role created automatically in CUA can be seen automaticall in the portal child system?
any help?
Thanks&Best regards

Thank you all. I got the solution.
Regards
Rajesh

How to create a connection between CRM and R73??

Hi, I have a problem. I am working with CRM and in my program I have to access to some tables in R/3 to get some data, I have created a RFC function to get those data (it is created in R/3). In CRM there is a report that use that function but when I use it I get a Dump. I think it is because the connection are not established. I know that I have to go to the SM59 but I don't know how and where I have to create, and I don't know which do the Destination parameter must be.
If anybody knows how to solve it...
Thanks in advance

Alejandro,
Please go through this link below
http://help.sap.com/saphelp_erp2005/helpdata/en/89/45aad99715462abdf09ec503e151e7/frameset.htm

How to make a connection between an application and a Coherence Grid?

Hello,
We're starting with Oracle Coherence.
How do I connect an application (for example running in JDeveloper) to an existing grid?
I used the following tutorial to get started with Coherence.
http://www.oracle.com/technology/pub/articles/vohra-coherence.html?msgid=6521631
Within JDev an Coherence instance is started, data is entered and queried.
Next I'd like to connect this to a running Coherence instance, (started with [Coherence home]\bin\coherence.cmd)
When I start the coherence.cmd and run the application from within JDev, I can see a connection is made
Map (?):
2008-05-13 13:15:24.667 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member(Id=5, Timestamp=2008-05-13 13:15:24.484, Address=10.35.1
4.150:8090, MachineId=10134, Location=process:4612@WBNL71033) joined Cluster with senior member 1
Map (?):
2008-05-13 13:15:24.934 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 joined Service DistributedCache with senior member 5
Map (?):
2008-05-13 13:15:25.630 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 left service DistributedCache with senior member n/a
2008-05-13 13:15:25.630 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 left Cluster with senior member 1
I am, however, not able to retrieve the data which is entered via JDev.
(1) What do I need to do to distribute the data entered via the Jdev application to the Coherence grid
(2) How can I get access to the data within the Coherence Grid(do I need to to change the Cache, Map or something else)?
Thanks in advance
Regards Leon

Hi Leon,
In order to see the entries created by the sample application within JDev, you will need to do several things:
1. Ensure that at least one storage enabled Coherence node is running, by executing cache-server.cmd at least once (coherence.cmd starts storage-disabled console only).
2. Run coherence.cmd and change to the appropriate cache from the console:
Map (?): cache VirtualCache
(the name should be the same as the one defined in cache-config.xml and Java code)
3. Execute commands against the cache:
Map (VirtualCache): list
This should give you a list of all the entries within a VirtualCache.
HTH,
Aleks

How to configure the connection between AS JAVA and AS ABAP

Hello,
I have installed a SAP Netweaver 7.3 AS JAVA and I would like to connect this JAVA Instance with 3 ABAP Systems (ECC 6.0) .
On help.sap.com I have found the following instructions: http://help.sap.com/saphelp_nwpi71/helpdata/en/3b/0c4b428f96ab53e10000000a1550b0/content.htm
Could you please advise, if the above configuration steps are OK?
Or could you please help me with the exact procedure?
Thank you in advance!
Noemi

Noemi,
I'm not sure how exactly you want to use ABAP and Java so it is hard to answer your question.
The link that you posted describes the steps to configure ABAP as a Security Assertion Markup Language (SAML) service provider. As a service provider, the AS ABAP enables you to off-load the authentication of users onto an identity provider. The identity provider enables you to federate identities across domains for Single Sign-On (SSO).
Check the following wiki page for a good overview of all the ways that you could connect to ABAP
http://wiki.sdn.sap.com/wiki/display/ABAPConn/ABAPConnectivityHome
Regards,
Ventsi Tsachev

How to create a connection between EP-Portal and BW system

Similar Messages

Maybe you are looking for