How to create a content profile and Why this need

how to create a content profile and Why this need

Hi,
You will need profiles to control the following behavior:
- Which metadata to be shown in the checkin form and search form
- Define default values to certain metadata
- Make metadata editable, hidden, info only etc
- Allow the user to see only relevant metadata, for example you could have 50 metadata defined, but all you need for the user to input is 10 for say HR documents, you can show only these 10 metadata for the user to contribute
HTH
Regards,
- Anand

Similar Messages

I switched phone with my brother and i could sucessfully restore everything to the new phone except my imessages. how can i restore them? and why this phone doesnt let my use my number, just my apple id for immesage/facetime? please somebody help me!!

after restoring all my stuff to the new phone, i wanted to see my messages but i discovered that all my imessages are missing. i checked in settings and i dont know why but the new phone doesnt let me use my phone number for imessage or facetime, instead it's using just my apple id. any idea how can i switch to the phone number again? in my old phone i used both my number and email for imessages, so i think maybe thats why i cant see my immessages now. please somenone help me!! thank you so much

Hi Katrina - I hear what you are saying about the problems. I've been using a BB Pearl here in Canada since January and I had the same problems with PocketMac from the start. iCal dates getting strangely duplicated after syncing and contacts in AddressBook groups getting listed twice on the BB. The only solution I used was to have the Mac always override the BB when syncing. NOt perfect but for me it was the simplest way to ensure the consistency of the data and my own sanity.
If anyone has a better solution that actually allows a clean sync I'd love to hear it.

How to hide a content profile to the end users?

Hello.
We want to show a content profile to the users belonging to a specific security group?
How Should I accomplish that?
I defined a rule with the following expression:
(#active.dSecurityGroup like "mygroup")
And we associated the additional fields to the expression.
We created a content profile with the associated rule.
It works fine, however I don't want to enable to the users that don't belong to the group "mygroup" the content profile created.
Thanks!
Ramiro Ortiz

In configuration manager, the profile tab, select the profile. There is a checkbox for personalisation rules. Tick it and then click the enabled button to define the rules - one for checkin and one for search.
Edited by: mikeyc7m on Mar 1, 2009 12:08 PM

How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

Hi All,
How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
Assume Material is Pen.
While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
Kindly help me out.
Thanks,
Renjith Jose

A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
"Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

How to create custom content placeholder in sharepoint 2013

Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
Johnweb

Hi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to create a Custom UIView and How to instantiate that ?

How to create a Custom UIView and How to instantiate that ?
In Flash, all we need to do is create a MovieClip and assign it a class name in the library.
Instantiation is a simple matter of:
var newclass:CustomClass = new CustomClass({initialization_data:1652});
addChild(newclass);
At this current point in time, my understanding of creating custom UIView in xcode is limited to the understanding that you have to:
1: Forward declare the class in the header.
2:
]newclass *CustomClass in @interface's {}
and THEN
@property (nonatomic, retain) newclass *CustomClass;
in the header file also.
3: Nib initialization in the implementation file in viewDidLoad and do "addSubview".
==============================
Based on my limited understanding at this point, I find the need to
@property (nonatomic, retain) newclass *CustomClass;
at the header somewhat limiting...as it denotes you must know how many instance you will create in the application before hand.
I believe I am wrong here, hence, my question is, how do I add custom UIViews with initialization codes in real time ?

hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian

How to create authority check object and assign to ztcode which is of modu

Dear ,
how to create authority check object and assign to ztcode which is of custom module pool program.its urgent kindly help points rewarded.

Manoj,
You can check with your Basis team to create authorisation object and assigining tcodes to the user profiles.
K.Kiran.

Plz tell me how to create authority check objects and how to usein prg

dear sir,
plz tell me how to create authority check objects and how to usein prg

http://help.sap.com/saphelp_46c/helpdata/en/5c/deaa74d3d411d3970a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.ht
Create custom authorization Customer specific object
If you have requirements that cannot be met using the P_ORGIN and P_ORGXX authorization objects (for example, because you want to build your authorization checks on additional fields of the Organizational Assignment infotype (0001) that are customer-specific), you can include an authorization object in the authorization checks yourself.
Create the authorization object using transaction SU21. Make sure you keep to the customer name range (Z/Y). To be able to use the new authorization object you have created in the master data authorization check, the object must contain the INFTY, SUBTY, and AUTHC fields. You can use any of the fields of the Organizational Assignment infotype (0001) for the other fields. You can also use customer-specific additional fields provided they are CHAR or NUMC type fields.
After you have created the object, you must start the RPUACG00 report. This report overwrites the MPPAUTZZ standard include with the code that is needed to evaluate the authorization object you created. Note: Technically speaking, this involves a modification. However, SAP fully supports this procedure. And you should not have more maintenance work as a result of this modification.
          Note: that if you use customer-specific authorization objects, you must maintain these objects in transaction SU24 (Maintain Assignment of Authorization Objects to Transactions) in the same way as you maintain the authorization objects P_ORGIN, P_ORGXX, and P_PERNR
AUTHORITY CHECK OBJECT Object_name
            ID fieldname1 FIELD fieldvalue1
            ID fieldname2 FIELD fieldvalue2
            ID fieldname3 FIELD fieldvalue3.
             If sy-subrc eq 0.   "Authorization exists
             Endif.
http://articles.techrepublic.com.com/5100-6329_11-5110893.html
Edited by: JackandJay on Jan 16, 2008 10:21 AM

HOW TO CREATE PRODUCTION SCHEDULING PROFILE

PLEASE
TELL ME HOW TO CREATE PRODUCTION SCHEDULING PROFILE
EXPLAIN IN STEPS
THANKS

Hi,
Check the below link and the screen shot:
http://wiki.sdn.sap.com/wiki/display/ERPLO/Production+Order+Type+Selection
Hope it will help you.
Regards,
Alok Tiwari

Can anybody suggest me how to creat match code id and object

hi Gurus,
can any body suggest me how to create match code object and match code id..
in my program i need specific values in search help..
to avoid confusion in selecting the values.
i need only selcted values..
thanks in advance.
vijay chavan

Hi
In Older SAP versions Match codes are used, now they are replaced by SEARCH HELPs
there 2 types of search helps
Elementary and Collective
see the doc and create accordingly
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=2176485
https://forums.sdn.sap.com/click.jspa?searchID=3173469&messageID=3601619
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee52446011d189700000e8322d00/content.htm
http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_exit.htm
https://forums.sdn.sap.com/click.jspa?searchID=4390517&messageID=1712818
Collective search help Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
A Collective search help provides alternative search
Paths by combining elementary search helps.
Only one search help can be attached to a field, table or data element. Several search paths are therefore attached with a collective search help.
A collective search help also has interface parameters like
an elementary search help.
Like an elementary search help, a collective search help has an interface of IMPORT and EXPORT parameters with which the search help exchanges data. Using this interface, the collective search help can be attached to fields, tables and data elements exactly like an elementary search help.
Parameter assignment needs to be done for each of the
Included search helps.
When you define a collective search help, there are no components for describing the dialog behavior and data selection; instead the included search helps are listed here. You must assign the parameters of the collective search help to the interface parameters of the included search help for each inclusion.
User may choose the tab and thus the elementary
search maethod.
When we execute the search help SCUSTOM, we are confronted with a dialog which gives us an option of either restricting
By 1)Search for customer according to booking
2)Search for customer according to name.
These are effectively the elementary search helps (SCUSTOM_BOOK and SCUSTOM_NAME) which have been included in the collective search help SCUSTOM.
HOT KEY
The hot key is used to select the elementary search help from the collective search help and to enter the restrictions in the dialog box for restricting values directly from the entry field. If the user often searches for values using the same search help, this procedure can save time.
Steps to create a Collective Search Help
1)Enter the search help name and click on create.
2)Choose Collective search help radio button option as the search help type.
3)Enter the search help parameters.
4)Instead of the selection method, we enter the included
search helps for the collective search help.
5)We need to assign parameters for each of the included
search helps.
6)Complete the parameter assignment by clicking on the push button
7)Collective search help offers the user to obtain F4 help
using any of the included search helps.
Regards
Anji

How to create a job card and how to add waranty card in sales order

I have one scenario for CS.the scenario is realted to automotive industry. Basically its a trading industry of HCV,MCV,LCV apart from that they will do servicing also. First the customer comes for a service.he is having free services. he will have waranty for spare parts of the vehicle. once he comes for servicing first the executive will take complains from the customer after that a Job card will be issued to the customer. there his chasis no ,engine no and registration no will be there. once enter the chasis no entire customer details has to come. how many free services he is having for how many kilo meters.then job card will go to the spare parts dept.that dept will issue the spare parts.then they will invoice the customer. he will pay the payment.and finally the gate pass will be given to the customer to deliver the vehicle.
painful area is how to create a job card and how to add waranty in sales order.
Regards,
Venkat

Hi,
Have u resolved it then Please let me know !!! It is a very interesting problem and owuld like to know the solution...
Regards
Krishna

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
== This happened ==
Every time Firefox opened
== After removing Firefox and Reinstalling it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

I installed iOS 7 and it deleted some of my contacts, as expected, so I just resaved them all. There's one particular number that will save but in my messages, it shows up as the number instead of the name saved. How do I fix it? And why is it doing that?

I had this problem too, I fixed it by going to my settings and under general at the bottom there is a reset option, go there. One of the options should be reset network settings, select that one. I’m not sure why it happens but that worked for me; hope you have the same luck!

How to create a content profile and Why this need

Similar Messages

Maybe you are looking for