How to create a copy cube from Business content statistics cube
Dear Experts,
I got a requirement to create the new cubes which is a copy of Business content statistics cubes.
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.
for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .
Similar Messages
-
Is it possible to create a copy cube from business content cube
Dear Experts,
I have to create the new cubes which is a copy of Business content statistics cubes .
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally . -
How to install sources for infobject from business content
Hi,
I have 16 infobjects for which we need to move to prod and there are no connections to it but the infobjects are active and some are i modified state, like no datasources, infosources, transfer rules etc., Can you please tell me the approach to install all the necessary for them. I mean how to find and how to install, please help if any documentation is available.
ThanksHi daniel,
Inorder to install the business object, you will be require to follow the following steps :
i)Go to RSA1 (Admistrator Workbench) for installing the Business Content. Navigate to object you want to install. Now you want to install the info object then select Info Object.
ii)Select your Info Object say 0MATL_GROUP (material Group).Click on Transfer selections.
iii)Now when the info object is selected. It will always be in default selection (Only Necessary object), Now if you want to install the various other things like data source, transformation rule etc as you specify in query
iv) For that go to grouping select IN DATAFLOW BEFORE AND AFTERWARDS. One more thing If you want to specify the Source system then u can do it by clicking on that Yellow Box (symbol specify the source system) adjacent to BEx (Truck Symbol). This mainly used for the things like transformation, update rule etc as you want.
v)Now you want to see if there can be some predictive error then go Install --> Simulate Installation.
vi)Now important point to note is MATCH(X) or COPY. Now suppose you already have the Material Group install in your system in Active version. Now here if you didnu2019t select the MATCH check box then your A-version Material Group will be overwritten by the D-version Material group provided by SAP.
vii)For ur more understanding lets take the example say you have added two customer specific attribute to Material Group now twist is SAP has also just release the enhance material Group with two additional attribute. Now you are very curious of getting this two attribute in your already active Material Group. For this you will be required to install the material Group from Business content. If you forget to check the Match option then your customer specific attribute will be lost. So to retain them we have to check the MATCH(X)
Hope it will help.
Thanks,
Deepak Machal -
How to select a suitable hierarchy from business content ?
Gurus,
I am new to BW and need to extract some sales data from R/3 into BW. Sales department is structured as Sales region ---> Sales person. It's a two level hierarchy maintained in R/3.
I need to extract this data and want to explore for any available datasource in business content and use it. Can someone tell me how to do this ?
Points guaranteed.
AbhishekAssisted by SANFANCLUB.
-
How do I move/copy contacts from Entourage to iCloud Address Book without creating duplicates? Address Book on Mac, iCloud, iPhone and iPad is now empty
Thank you for letting me know!
Going to give it a go. Had a back up of all my clients files stupidly not my software as I have the originals disks. Just realised that amongst the software is ibiz and have lost al my accounting and billing files for the last 7 years want to cry so losing my contacts now will really tip me over the edge!
Fingerscrossed this works! -
How to install cubes and queries from Business content in BI 7
Hi all,
Could you please help regarding how to install Info Cubes and Querries from Business content in BI 7.0
And pl send some OSS notes on BW Statistics in BI 7.0
Thanks in advanceAnd also you can go thru the following link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
Regards,
Gattu -
Can't create DTP for cube migrated from business content to 2004s
I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s.
Master data was not a problem, but Im having a hard time getting InfoCubes to migrate.
I installed 0PUR_C03 from Business Content and replicated the DataSource into the Data Warehouse.
I right-clicked 2LIS_02_S013, selected Additional Functions, then chose Transformation erzeugen (a.k.a. Create Transformation in English).
The transformation is generated with no errors and it was activated. The DataSource is migrated automatically in the process.
Then, I went to add the Data Transfer Process and that is where I got stuck.
I right-clicked the cube and took Create DTP. For source type, I selected datasource. A dialog box then shows the objects associated with the cube, including the converted infosource, but nothing is highlighted for me to choose from, and I cant complete the process of creating the DTP.
Can anyone tell me where I might have gone wrong?u got it...
Message was edited by:
Raman
Message was edited by:
Raman -
Is it possible to delete data selectively from Business content cubes
Dear Experts,
Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
A RAISE statement in the program "SAPLRSDRD" raised the exception condition "X_MESSAGE".
Since the exception was not intercepted by a superior program, processing was terminated.
and i tried with few more Technical content cubes but the same thing happens.
Pls let me know how to selectively delete data from Business content cubes if it's possible?.
Thanks in advance for your favorable assistance.
Regards,
Ramesh-Kumar.Hi Ramesh,
Follow below steps for selective deletion:
1. Transaction code: Use the Transaction code DELETE_FACTS.
2. Generate selective deletion program:
A report program will be generated of the given name, here .
3. Selection screen:
Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
After executing it will take you to a selection screen:
As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
Click on the technical information button (marked in red box above) you will get below screen:
ABAP program to carry out the Calendar week calculation
Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
Transaction code: Use T-code SE38 in order to create a program.
Logic: Suppose we need to delete the data older than 100 weeks.
a. Get the number of weeks and system date in variables and calculate the total number of days :
lv_week = 100. *number of weeks
lv_dte = sy-datum. *system date
v_totaldays = lv_week * 7. *total days
b. Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
lv_calday = lv_dte - v_totaldays. *corresponding calday.
c. Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
Get the sales week time elements
call function 'DATE_TO_PERIOD_CONVERT'
exporting
i_date = lv_calday
i_periv = lc_sales
importing
e_buper = lv_period
e_gjahr = lv_year
exceptions
input_false = 1
t009_notfound = 2
t009b_notfound = 3.
if sy-subrc = 0.
ls_time-calweek(4) = lv_year.
ls_time-calweek+4(2) = lv_period.
endif.
v_week = ls_boots_time-calweek.
Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
d. Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
Submitting the Data deletion program for ZEPBGC01 and key field
SUBMIT ZDEL_EPBG WITH C039 LT v_week.
Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
Hope ... this will help you..
Thanks,
Jitendra -
How to find the right primary key for DSO from Business Content
According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
IngridHi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK. -
SMARTFORM: how to create 3 copy (each copy can print more than one page)
SMARTFORM: how to create 3 copy (each copy can print more than one page)
Hello everyone.
my user want to have form that print 3 copy.
such as 1 copy description = master, 2 copy description = copy 1 ,3 copy description = copy 2.
so i create 3 page . I copy from page 1.
and in each page there is main window which can have data more than 1 page.(such as have a lot of sale data ,it's take 2 page for show output .so it's take 2 page in each copy)
please help me.
how to set page and window in each page for print 3 copy and each page can have main window that print more than 1 pageHello Vinit.
thank you very much for your help.
could you help me more please.
in below code
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
EXPORTING
COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Now i out of office .so i cannot test.
where do i set NAST_ANZAL for 3 ?
can i input ?
NAST_ANZAL = 3.
DO NAST_ANZAL TIMES.
l_counter = l_counter + 1. " << pass this to FM and use for the TEXT to print
CALL FUNCTION LF_FM_NAME
EXPORTING
COUNTER = l_COUNTER " USE this to derive the text into PRINTOUT
enddo.
Edited by: dittaporn nanasilp on Mar 12, 2011 3:33 PM -
How to create a p7c format from a pem or der or cer
Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html and
other sites but didn't find anything useful.
Thanks & Regards,
SubodhOn Windows double click the der or cer certificate. This should open it in the
Certificate viewer.
Open the Details tab, click on the Copy to File button and select pkcs #7 format.
Pavel.
"Subodh" <[email protected]> wrote:
>
Hi,
Anybody knows how to create a p7c format from a pem or der or cer.
I have checked the URL http://edocs.bea.com/wlibc/docs70/admin/cvcerts.html
and
other sites but didn't find anything useful.
Thanks & Regards,
Subodh -
How to create a Sales order from multiple quotations?
Hi All,
Please tell me how to create one sales order from multiple quotations?
Regards,
MaddyHello Maddy,
To create the sales order from multiple quotation, you should put the value "F - Only at item level: Always with selection option" under Quotation determination in your sales transaction type.
It will give you a pop-up to choose your quotations item while creating the sales order.
Some per-requisites are there:
1. Copy control should be maintained between your quotation and sales order.
2. Quotation should be error free and should have the status "Released"
3. Sold to party and Organization should be same in both transaction.
For more information you can check the below link:
Processing Quotations - Sales Transactions - SAP Library
Best Regards,
Dinesh -
How to create multiprovider in BI 7.0 using two cubes
Hi all,
how to create multiprovider in BI 7.0 using two cubes?Go to the infoarea you want and right click and click create a Multiprovider.
In the deifiniton of MP, choos ethe two infocubes you want to add and continue.
Choose the dimensions you want to include in your MP.
Add the characteristics you want to include in the dimensions.
Add key figures.
Then identify which cube the characateristics and keyfigures should come from and activate.
search the forums also. -
How to open Crystal Reports from Business Content Ext BW
Hi friends,
I have activated 0CR_FIAA_M20_Q0007 Crystal Reports from Business Content Ext BW and I have configurated BW_Publisher services in BW but I do´t see reports in /CRYSTAL/RPTADMIN.
I check RFC connection and it´s ok
Here I can´t get a role
and here I don´t see reports
Do I have to create special role with especial authorization?
How do I save this Crystal reports in a Rol?
How do I open this Report ?
I check Ingo Blog BusinessObjects and SAP - Publishing of Crystal Reports Part 1 of 3
but I think, I don´t have some configuration.
RegardsHi,
I can open report from Role thru CR 2013.
Here SAP 2.0 folder y Rol
Here, settings in /CRYSTAL/RPTADMIN are: -
How to activate a cube in business content of bi ?
how to activate a cube in business content of bi ?
Please search the forum before posting a thread
Edited by: Pravender on Apr 11, 2011 4:28 PMhi ra
good question dear
if you want to activate cube in business content do this steps.
1).select your data source and maintain all the things in r/3 side.
2).then come to bi side .
3).t-code rsorbct.
4).you must have an idea about your app component .i..e that app belongs to sd or mm or hr or finance .
5).if it belongs to purchasing select infoobj and select supply chain management ,select purchasing.
6).select char and key fig,drag and drop it into right side component .
7).select info provider select supply chain management and select your cube .
8).how to find cube .that is cube like 0pur_c01,c02,c03,c04 like that select any of the cube and drop in to right side component .
9).now installation part.
10).select source system top side and select your source ecc 6.0, select component and select install/activate.
11).now your cube is ready to use .create package for full,initialize ,delta.ok
bye ....................samar reddy...
Maybe you are looking for
-
How to call ABAP programs from Excel
Hello everyone, Currently I'm investigating the integration of Excel and ABAP program. I find it's easy to call Excel from ABAP program, but does anyone of you know how I can first open and do some actions in an Excel sheet first, and then, for examp
-
Reinstalling portal and licenses
Hi, we had to reinstall our test portal server from scratch. Now when I try to use the old license I get an error as the System-ID is not the same as in the License, is ther a way to change the System-ID or do I have to apply for a new license? Thank
-
Memory use with PSE 11 on my Mac
My iMac has 12 GB of RAM - but when I go to preferences on my Photoshop Elements version 11, I can only get PSE 11 to use about 3 GB of RAM. I am doing some photomerge panoramas, and when I want to fill in the blank borders of the final image, PSE
-
Can't Update to iOS 8.1
I have been checking "Software Update" on my phone periodically since 8.1 was "released". Each time I get an error "Unable to Check for Update: An error occurred while checking for a software update." At first I suspected it was due to an overload of
-
Upgrading to Support Pack 1 Interim Release 4 HP5
Will we have to change the Zenworks clients on the Desktop or will the latest release work with our existing client, version 7.01.0 ?