How to create a custom application in Fusion Apps release 4 ?

Hello Experts,
My project has a requirement to define a custom application in Fusion Apps, the one that is equivalent to fnd_application from EBS.
Any document or note explaining the creation of custom application in Fusion and its association with Unix directory structure would be of great help.
Kindly share the experience if any of you have worked on the same and have anything documented.
Thanks in advance.

You are asking in red wrong forum. Try an EBS forum.
Timo

Similar Messages

How to create a Custom UIView and How to instantiate that ?

How to create a Custom UIView and How to instantiate that ?
In Flash, all we need to do is create a MovieClip and assign it a class name in the library.
Instantiation is a simple matter of:
var newclass:CustomClass = new CustomClass({initialization_data:1652});
addChild(newclass);
At this current point in time, my understanding of creating custom UIView in xcode is limited to the understanding that you have to:
1: Forward declare the class in the header.
2:
]newclass *CustomClass in @interface's {}
and THEN
@property (nonatomic, retain) newclass *CustomClass;
in the header file also.
3: Nib initialization in the implementation file in viewDidLoad and do "addSubview".
==============================
Based on my limited understanding at this point, I find the need to
@property (nonatomic, retain) newclass *CustomClass;
at the header somewhat limiting...as it denotes you must know how many instance you will create in the application before hand.
I believe I am wrong here, hence, my question is, how do I add custom UIViews with initialization codes in real time ?

hi,
one workaround i could think of is using the CM views to search for content that belongs to a category and display it in a custom way.
http://www.oracle.com/technology/products/ias/portal/html/plsqldoc/pldoc904/wwsbr_api_view.html
this only allows you to search for the meta-data available in the CM views but not the content of an item that is available when doing a search.
in the next major portal release we will have a publich search API that can be used for these type of requirements. you can execute your search and format the results in the way you want.
regards,
christian

[CLOSED]How to create a custom messages

Hi All,
I have a page and one save button .on press of save button, i want to show a custom message like "Applied changes are saved."
Can anybody please elaborate how to create a custom message and how to show it through Controller.
may i use
OAException message = new OAException("AK",
"FWK_TBX_T_EMP_DELETE_CONFIRM", tokens, INFORMATION, null);
-Thanks,
Avinash
Message was edited by:
user624747

When i used the code
OAException confirmMessage = new OAException("JTM","JTM_SAVE_SUCCESSFULL",null, OAException.CONFIRMATION,null);
throw confirmMessage ;
i am getting following error :
Error :
Application: JTM, Message Name: JTM_SAVE_SUCCESSFULL.
I have created the message "JTM_SAVE_SUCCESSFULL" through
Application Developer --> Application --> messages responsibility and given its type as error , application as "mobile application foundation" and then "ran the generate message" program.
After that i checked the fnd_new_message table . the message is there.

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

How to create file on application server?

how to create file on application server?

Hi,
The following program illustrates the creation of ifle in app server and reading the file from appli server:
DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBAP-VBELN.
START-OF-SELECTION.
SELECT *
    FROM VBAP
    INTO TABLE ITAB
WHERE VBELN = P_VBELN
    PERFORM WRITE_DATA.
    PERFORM READ_DATA.
*&      Form WRITE_DATA
      text
--> p1        text
<-- p2        text
FORM WRITE_DATA.
OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
LOOP AT ITAB.
TRANSFER ITAB TO 'VBAP_DATA'.
ENDLOOP.
CLOSE DATASET 'VBAP_DATA'.
CLEAR: ITAB, ITAB[].
ENDFORM.                    " WRITE_DATA
*&      Form READ_DATA
      text
--> p1        text
<-- p2        text
FORM READ_DATA.
OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
DO.
READ DATASET 'VBAP_DATA' INTO ITAB.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND ITAB.
ENDDO.
CLOSE DATASET 'VBAP_DATA'.
LOOP AT ITAB.
WRITE:/ ITAB-VBELN,
        ITAB-POSNR.
ENDLOOP.
ENDFORM.                    " READ_DATA
If it is helpful rewards points
Regards
Pratap.M

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

How to create the custom charts?

how to create a custom charts? for example the donut shapes, but for the data can be automatically adjust (like a available charts on keynote)

Keynote and Numbers do not have a tool for making Donut Graphs. There are ways to make them using HTML, but I prefer to cheat:
1 Create your first graph as a pie chart and add a circle of solid color to the center
2. If you need more, take a screenshot of the pie chart with the center fill and drag the screenshot into Preview - in Preview > Select Tool (pulldown from Toolbar) > Instant Alpha and remove the inner filled circle and outer fill then Save As > PNG with Alpha
3. Drag your new hollow shape into Keynote. This chart can be placed over another pie chart with a filled center (the fill should match the background)
Not as graceful as a special tool but can get the job done quickly - changing the data requires starting it over since at least one of your donuts my be an image rather than a pie chart with variable data.
Try it. If you need more specific tools, Google Donut Shaped Charts for starts.
Good luck

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create an custom template for cheque printing layout?

Hi, I have a question about cheque printing format set up in SAP Business One.
All the the system standard templates in u201CCheque print lay out designeru201Dare u201Ccheque-stub-stubu201D or u201Cstub-cheque-stubu201D or u201Cstub-stub-chequeu201D (three portions). What I need is u201Ccheque-stubu201D （two portions）only. Anyone knows how to create an custom template?
Thanks.
Edited by: Angela Zhang on Jan 17, 2010 7:18 AM
Edited by: Angela Zhang on Jan 17, 2010 7:18 AM

Hi Angela,
Check the thread,
Re: Preprint AP check - stub/check repetitive area fram size
CHECK PRINTING
Re: check/cheque for payment printing posting date on stub
PLD Check-Stub-Stub
PLD Check
PLD Multiple Check printing
Regards,
Madhan.

How to create a custom measure for each level of a dimension

Hi all!
Can Anyone please explain me with an example, how to create a custom measure for each level for a dimension? I dont mine if you use
one or more measures.
thanks in advance
hope someone helps me.

For example:I create a dimension for product_dim witch has 4 levels:total, class, family and item:
d_aben18
n1_aben18
n2_aben18
n3_aben18
n4_aben18
herarchy:h_aben18
cube:cubo_aben18
measure:med_aben18
I create this code to fetch the data to the dimension:
TRAP ON CLEANUP
SQL DECLARE c1 CURSOR FOR SELECT-
total_product_id,1,'N1_ABEN18',total_product_dsc,-
class_id,1,'N2_ABEN18',total_product_id,class_dsc,-
family_id,1,'N3_ABEN18', class_id, family_dsc,-
item_id,1,'N4_ABEN18',family_id,item_dsc-
FROM PRODUCT_DIM
"OPEN THE CURSOR
SQL OPEN c1
"FETCH THE DATA
SQL FETCH c1 LOOP INTO-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N1_aben18_LEVELDEF,:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N2_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N3_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
:APPEND D_ABEN18, :D_ABEN18_H_aben18_HIERDEF,:D_ABEN18_N4_aben18_LEVELDEF,:D_ABEN18_parentrel,-
:D_ABEN18_long_description,-
"SAVE THE CHANGES
UPDATE
COMMIT
CLEANUP:
SQL CLOSE c1
SHOW 'KK2'
Then I create a cube with use compression off, and in rules sum for example.
After, I create a measure and I select Override the aggregation specification for the cube, in rules I put nonadditive and I would like to create aprogram to assign distinct values to each level of the dimension. For example, I put 1, 2 3, and 4 values, but at the end I would like to put count(distinct(values)).
for that I create another program:
VRB D_RETURN DECIMAL
if D_ABEN18_N1_ABEN18_LEVELDEF eq 'N1_ABEN18'
then D_RETURN = 1
if D_ABEN18_N2_ABEN18_LEVELDEF eq 'N2_ABEN18'
then D_RETURN = 2
if D_ABEN18_N3_ABEN18_LEVELDEF eq 'N3_ABEN18'
then D_RETURN = 3
if D_ABEN18_N4_ABEN18_LEVELDEF eq 'N4_ABEN18'
then D_RETURN = 4
else d_return=26
return d_return
"SHOW D_RETURN
cubo_aben18_med_aben18_stored=d_return
but it doesnt work.I dont know how to put to assign or to see what I want.
I report the measure, or I report the program, but then how can I see the values of the measure?
thanks in advance

How to create a custom Hierarchy in IDT 4.0

Hi All.
I am trying to create a custom hierarchy objects in the Information Design tool, But I am not able to find it here as same sort like the universe designer in 3.1 or 4.0 . I have found the navigational path but I am not sure how I can use it as a hierarchical objects in my reports, Can anyone please suggest how to create a custom hierarchical dimension in IDT 4.0.
Thanks,
Navin

Custom Hierarchy are called navigation path in IDT. I will suggest to go through the navigation path tutorials below
http://scn.sap.com/docs/DOC-22087
Hierarchical objects are no different than any regular objects but they enable the drilling in drill mode in the report and you can create a cascading prompt on top of them..
If after going through this you still have any specific questions just let us know...

Creating a Custom Application in Applications 11i

Am on 11.5.10.2
To create a Creating a Custom Application in Applications 11i...
i having a doubt in this.. plz explain me...
Apply ADX.E.1 and add the entry to topfile.txt as a standard product top
entry (follow the existing model in the file)
which means suppose i need to add CUSTOM_TOP, i have to add following entry in top.txt file right..
CUST /sidapp/sidappl
Customised environment variables can be added to AutoConfig by using the filename specificed by s_custom_file, which is then called from theAPPSORA.env file. If using Forms Listener Servlet, you may also need to add $CUSTOM_TOP to formsservlet.ini in $APACHE_TOP/Jserv/etc
can anybody explain wats the meaning of above sentence....

HI
I need to create a CUSTOM_TOP
Edit topfile.txt file under $APPL_TOP/admin to have the following entry:
cust /u01/oracle/testappl
Where:
- abc is your custom top directory
- /u01/oracle/testappl is absolute path of your APPL_TOP
In APPSORA.env
# Source the custom file if it exists
customfile=/testAPP/testappl/customTEST_HOSTNAME.env
if [ -f $customfile ]; then
. /testAPP/testappl/customTEST_HOSTNAME.env
fi
. /testAPP/testora/8.0.6/TEST_HOSTNAME.env
. /testAPP/testappl/TEST_HOSTNAME.env
In this file i suppose to replace customfile=/testAPP/testappl/customTEST_HOSTNAME.env with CUSTOM_TOP=/testAPP/testappl/customTEST_HOSTNAME.env
or
i have to add seperate
CUSTOM_TOP=/testAPP/testappl/custom/11.5.0
thanks,

How to create a custom application in Fusion Apps release 4 ?

Similar Messages

Maybe you are looking for