How to create a custom Project Preset Premiere Elements 9?

Hi,
In the help documentation of Premiere Elements 9 it says that i can create a new Project Preset: "The procedure for creating a preset differs if you’re changing settings for an open project versus establishing settings for a new project. Presets you create can be applied to new projects, and if you want to back up or distribute preset files, you can find them in the Settings subfolder of the Adobe Premiere Elements folder on your hard disk." (url).
Sadly, i can't find the specific instructions that would help me to establish settings for a new project and save it.
Thanks in advance for any help.
Jorge

Steve,
Below is the spec of the footage. I get this info using "VideoSpec". The thing I can't match a preset Full HD 1080i 60(59,96).
Thanks again.
*** Video Track Parameters ***
- Format: H.264/MPEG-4 AVC
- Size: 25.3 MiB (99%)
- FourCC: H264
- Track number(s): 0
- Bitrate: Max.: Undefined
   Average: 17508 Kbps
   Min.: Undefined
- Frame rate (fps): Max.: 59.960
   Average: 59.940
   Min.: 59.920
- Bitrate mode: Variable
- Encoding profile: [email protected]
- Resolution: 24 bits
- Width (Pixel number): 1920
- Height (Pixel number): 1080
- Pixel Aspect Ratio: Undefined
- Display aspect ratio: 16:9
- Chroma subsampling format: YUV420p
- TV standard: Undefined
- Interlacing: Interlaced - Top Field First
- Encoding library: Undefined
- Additional Parameters: CABAC: Yes
   Reference Frames: 4
*** Audio Track(s) Parameters ***
- Format: AAC - MPEG-4 audio
- Size: 190 KiB (1%)
- FourCC: MP4A
- Number(s) and language(s): 2: English
- Details: -
- Profile: Low Complexity
- Bitrate: 128 Kbps
- Bitrate mode: Constant
- Resolution: 16 bits
- Rate: 48.0 KHz
- Channel(s): 2 (stereo)
- Position: Left Right
- Encoding Library: Undefined
- Additional Parameters: Spectral Band Replication: No

Similar Messages

How to create the Custom project System as Web Project

Hi,
I have created a custom project system using this walkthrough. But
this walk through is targeting Visual C# project system. I need to create the Custom project system as Web project and set the start up page as index.html file. How can I achieve this?
Note:
I have got the Custom project system sample from VS2013 SDK samples(https://mpfproj12.codeplex.com/).
But it demonstrate the Custom console applications only.
- Abbas K

Hi,
So you didn't even follow this walkthrough yet? If you did, how did you do it?
I failed to create such a web project system because I finally messed up my VS experimental instance. But it's possible to create a custom web project system, by following this walkthrough. Someone else has successfully made it, check this
link.
The difference is that you have to use web project type instead of the console application project type. You could copy a web project's .csproj file into the VSPackage project and rename it to xxx.myproj. There's an error in the walkthrough that the AssemblyInfo.cs
file should be put into Properties folder and set the "Build Action" property to Content, "Include in VSIX" to true.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I delete a project in premiere elements

how do I delete a project in premiere elements

Welcome to the forum.
This will depend on how you set up the Project, when you began.
I create a unique folder/sub-folder, for each Project, and everything is in that hierarchy, the Scratch Disks, Copies of all Assets, etc.. When done, I just Delete the Project's folder, and all sub-folders go with it.
One consideration is if there is a chance that you will ever need to revisit that Project, you might use the Project Archiver first, to get a copy of the entire Project onto, say an external HDD - just in case.
How did you set up the Project's folders/sub-folders?
This ARTICLE will give you one workflow.
Good luck,
Hunt

How to Create a Custom Project Site Template Using Visual Studio

I know how to make changes and save a site as a template but I need to be able to create a new project site template during deployment to different environments. Trying to have this not be a manual process.

Hello,
This article might help:
http://blogs.msdn.com/b/sambetts/archive/2013/10/17/creating-a-clean-visual-studio-solution-from-a-sharepoint-2013-site-template.aspx
Start with a default Project Site (create a new site from the Project site template) and save out the WSP then import into VS.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Newbe requests how to remove "applause" from Project in Premiere Elements 4?

This is the second time I attempted to make a large slide show using Photoshop Elements 9 and Premiere Elements 4 I am having two main problems:
1. I do not know how it got there but every time I run the slideshow on Premiere Elements I hear applause on each photo? Don't know how it got there either and frustrated how to get rid of it
2. When I move a photo to another place it leaves a blank space. I try to get rid of the space by going onto Edit and asking to delete and close gap. Sometimes it works and sometimes it does not. Then sometimes my only option is to remove the present photo and it does not remove it.
3. Lastly I wanted to change composing the slide show from Premiere Elements to Photoshop Elements 9 but the latter would not recognize the file.
THIS PROJECT IS A HUGE RUSH PROJECT FOR MY DAUGHTER'S 25TH ANNIVERSARY. TIME IS RUNNING OUT AND I AM PANICKING.
Thanks for your help.
Kathy

Kathy,
You say that you have PrE 4.0, but I did not see which version of PSE you have. You would need PSE 4.0, to be able to go directly to PrE from PSE. Otherwise, one would need to do, as you have, and Export from PSE as a WMV file, which would then be Imported into PrE.
The weakness in this latter method, the Export/Import, is that a WMV file is highly-compressed, so quality, when coming out of PrE will be compromised. Next, if one has the same versions of the two programs, and they Send to PrE from PSE, once in PrE, they can choose Break Apart, to get all of the elements in the SlideShow separated again - this cannot be donw with the WMV Export/Import.
Now, even with the WMV Export/Import method, one can still edit, but they are now cutting on a finished AV file, and things are not so easy - they are working on one large Video file, and one large Audio file on the Timeline.
For the blank spaces, one can just cut those out of the Video, but if the whole Clip (the WMV file) has Audio, that needs to stay, things are not quite so easy. In your case, however, it might be easiest to just Delete the Audio from the WMV, cut the Video to suit, and then Import the Audio Clips that were used in PSE, and just use those again, listening closely for the one(s) with the applause, and substitute something else, instead. This editing will be much, much easier in Timeline View Mode.
For that applause, it might be easier to go back to the Project in PSE, find where it is being introduced, and substitute for it there.
Now, if the applause comes during otherwise silent passeges, you can just cut it out, or can lower the Volume to the point that it is not heard. If it comes over music or dialog, there is nothing easy, that can be done. To remove it, and save the music, or dialog, will be virtually impossible and take much time, for probably little improvement.
Let us know just a little bit more about your Project and also the version number of PSE.
Good lukc,
Hunt

How to create a time-lapse with Premiere Elements?

To whom it may concern,
I have a DSLR (Rebel T3i) and I am planning to set it to take pictures every so often. I heard there was a way to do it within Premiere Elements and would rather save money since I already own this great software. I would like to have the steps to do so as soon as possible.
Sincerely,
Adobe Pat 206

Adobe Pat 206
Lots more details, but for starters please check out my blog post on Premiere Elements Time Lapse basics.
http://www.atr935.blogspot.com/2013/07/pe-time-lapse-video-basics.html
More later.
ATR

Can I Create a Custom Menu In Premiere Elements 12?

It's great that Elements 12 has a way to automate menus for a DVD, but so far I can't find one I like. Specifically I want a picture background to fill up the whole screen, just like I can do with a title. Maybe my question should be can I turn a title into a menu by adding markers?
And a related question is do I have to have a main menu and a separate scene selection menu? I am used to creating menus (with Pinnacle) that allow just one menu screen and buttons that can be added (and the "button" can be text or a picture).
Now I'm getting ahead of myself but if I have a scene menu and someone selects a scene, at the end of the scene will it just continue playing or return to the scene menu? It's an option in Pinnacle. I'm hopping it is in Premiere as well because once the scene is done I would rather have it continue to play on like commercial DVDs would if you jumped to a scene in the middle of the movie to continue watching.
Thanks for any comments.
Rick

Rick
The disc menus come as a set of main menu page and scene page.
The main menu page has buttons for Play All and Scenes Selection (to get to the scene menu page if the viewer does not want Play All.
The scene menu page has buttons for the Scenes for the viewer to select what to view first. But, remember that after the viewer watches the selected scene, the viewer in not going to be taken back to the main menu unless he/she selected the last scene to watch.
The number and sequence of the scenes in the scene menu page will be directed by where you place the
menu markers on the Timeline content. The main action for disc menu set up is going to be in Tools Menu/Movie Menu/Movie Maker Customization.
The main menu page comes with a designed in number of buttons. So does the scene menu page.
a. main menu markers on the Timeline to place main menu buttons
b. scene menu markers on the Timeline to place scene menu buttons.
Now here is the consideration. If the number of scene markers on the Timeline exceeds the number of designed in button for the scene menu, then the excess spills over to additional pages. Same situation for the main menu and main menu markers.
Example...if you have 6 scene markers placed on the Timeline and you use a menu with a scene menu with only 4 spots for buttons, then you are going to end up with 2 scene menus, the first with 4 buttons/page and the second with 2 on the page. In the end
a. 1 main menu...Play All Button and Scene Selection Button
b. 2 scene menus....lst with 4 buttons
Let us try this. Go back to my blog posts and see if the introduction in any of them describes what you want to do.
If one looks promising, then we can go step by step through the how to provide for smoother sailing through the details. The details may look better on the second read.
Based on all that I will see if I can customize something beyond which I have already written about.
Right now for practice look at 8 Timeline scene markers for the Memories/Memory Box theme which should give you
1 main menu page with a spot to insert a picture
2 scene menus page (each with 4 buttons per page)
ATR
Note: If all your scene markers appear to have similar scenes, make sure you have put a few frames distance between menu makers.
Also, in the Marker's dialog, use the Offset to move the view a little. This will not affect the position of the marker on the Timeline, just the
view of what you are seeing in the scene thumbnail.
We can get rid of thumbnails but it will take us into the theme's psd editing in Photoshop CS or higher or depending on the circumstances
Photoshop Elements.

Custom Project presets, PE 10

I'm using PE 10 on Mac OSX. I'd like to create a custom project preset, as suggested in this thread, for use with my GoPro HD.
The default GoPro HD footage is 1280x960, progressive scan.
I can't locate any of the PE preset files in the finder to modify them myself.

Yes, thank you Steve, I did see that discussion. Within that thread,Goproski found a way to create a new presets file using an one of the exisiting presets. He created a 1280 x 960 preset. He even gave the directory location of the presets files. I have a Mac, and I'm unable to find those same (or similar) files.
I did run the original footage through Cineform and then try to edit in PE10. This was much better than trying to edit the orginal GoPro footage, but still very 'jittery'.
Thanks again.
Brian

How do I find past projects in Premiere Pro?

Hey Everyone,
I was wanting to make an alteration to a project I finalized last month but since then it has gone off my 'recent project' list once I open premiere. I can't find it in my auto save folder on my PC also. I can only find the rendered files and some peak files. How do I find old projects in Premiere Pro? Thanks in advance, all of you guys are awesome.
Mike Diaz

When I create a new project I have PPro put "everything" in an Adobe folder on my temp file drive... E:\Adobe
INCLUDING the files that default to the C: drive - Drive C space http://forums.adobe.com/thread/1007934?tstart=0 see reply 4

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

How to create a custom mapping operator.

Any idea on how to create a custom mapping operator.
An example: When i insert records in a table, i need to populate some columns like "created by" and "Created date" which are constant across many tables. Untill now i created a constant operator with attributed "Created by" and "Created Date" and put it on to a map. I'd like to know if there is a way in Oracle Warehouse builder to created such custom operator.
puli.

Hi,
As per next major OWB release (OWB10gR2 a.k.a. Paris) it will become easier to share 'blocks of objects', so then it would be easy to define you Constant only once, and use it in the same configuration all over your project(s).
Right now this is not possible.
I guess you could try to build a table with all these default values, and use this to populate your audit columns.
Good luck, Patrick

How to Create the Custom print Quote Report ?

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

Hi All,
I want to create the custom Print Quote report . I know the below details and referred the below metalinks .
Note: 780722.1 - How to Create a Custom Print Quote Template in Oracle Quoting ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=780722.1
Note: 392728.1 - How to Modify the data source for the XML version of the Print Quote report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=392728.1
Note: 468982.1 - How To Customize The Asoprint.Xsl
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=468982.1.
Oracle Metalink:
Note: To add a column to the print quote report, following files need to be updated:
LinesVO.xml --- xml files containing the sql query and attribute definition
LinesVORowImpl.class - public class extending the framework class OAViewRowImpl.
This class contains the set and get for the attributes defined in xml file.
ASOPRINT.xsl - this is the xsl stylesheet file used to describe the report layout.
This file needs to be modified to include the new column being added to the report
QUESTION :
My question is,
1. wether my approach (below iare the details)of trying to extend the PromptVO is the right way or is there any other way to add the new columns.
I want to add new fields on to the report . When i looked into the it says the below
Here we find that to add a new column, oracle says to update the LINESVO.xml, do they really mean to update the base files.
This report uses following VO's
PROMPTVO
HEADERVO,
LINESVO.
To create new Headers & Prompts, i tried extending the PROMPTVO. Once the extended VO is substitued , i dont even get the data for standard oracle Prompts. is this the right way to add columns?
Thanks

How to create a custom function module with the records in SAP R/3?

Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
Sara

Hi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

How to create a custom Project Preset Premiere Elements 9?

Similar Messages

Maybe you are looking for