How to create a database connection using Jdeveloper 10g

when i try to create a database connection,its asking for connection name.is that connection name is user-defined or predefined name??In the next step its asking for username and password.where do i get that username and password.if anyone know this please explain me in detail coz this is for the first time am using JDeveloper.
Thanks in advance.

Hi user583040,
May be you could have a look on this: http://my.opera.com/Tiftif/blog/faq-jdeveloper-english §5.2. If you have suggestions to improve this document, i will greatly appreciate to add them to it.
Regards,
Tif

Similar Messages

How to create standby database by using duplicate

Dear all,
How to create standby database by using duplicate,is there some doc to read?

Hi;
You can use
Step-By-Step Guide To Create Physical Standby On Normal File System For ASM Primary using RMAN [ID 838828.1]
Creating Physical Standby using RMAN Duplicate Without Shutting down The Primary [ID 789370.1]
Also use goole, there are many blog-site-dogs mention that topic. From googling:
Creating a Standby Database with Recovery Manager
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm
http://www.pythian.com/news/248/recipes-for-creating-a-managed-standby-with-rman/
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regard
Helios

How many number of database connections used in a transaction

Hi All,
We are using weblogic 8.1 with Oracle 9i both running on windows 2000. We are trying to estimate the potential resource usage in the system we are building. As part of this activity we want to find out how the database connections are used for entity beans -
If a session bean calls more than one entity beans
(each method in the entity bean doing one update) does weblogic use the same database connection for all the entity beans or does it use seperate connections ? Is such behaviour documented somewhere ?
Here the assumption is all the entity beans are linked to the same datasource.
If the (default) behaviour is to use seperate connections is there a way to make it use one connection across multiple entity beans.
Thanks
Kingshuk

Hi Bodapati,
Sorry for the delay in replying to this.
There is optimization, which will use the XA
connections from the pool. Can you tell me what your
observations are? I may be able to see if we can tune it.From our tests the XA driver too appear to make use of one connection only for the life of the transaction. There is a good document here explaining how it is ensured that only one connection is used - http://e-docs.bea.com/wls/docs81/oracle/trxjdbcx.html#1083132
Quoting from the above URL :
When a thread attempts to use a connection, the XA jDriver calls xa_open (and xa_start) to create the connection and associate it with the thread. After the database connection is created, the connection remains associated with the thread; the driver does not call xa_close. When the thread subsequently needs a database connection, it uses the same database connection associated with it, even though it appears to get and return a connection from the JDBC connection pool
I am not sure why you say the connections will be
blocked. One connection will be blocked only if you are > using non-XA driver to setup the pool, until the
transaction commits. For XA there is no need to reserve
the same connection for the transaction.Probably my understanding on this is incorrect and I need to read up. I was under the impression that - once a transaction begins, each connection used within that transaction, is enlisted as a part of that transaction and can not be used by in another transaction until the transaction commits or rollsback.
Thanks
Kingshuk

How to create Entity Bean (CMP) using JDeveloper & Weblogic

Hi,
Using : JDeveloper9i (9.0.2.829)
When i am inside the EJB Wizard (Step 1 of 3), the input field 'CMP Provider' shows only Oracle9iAS CMP Provider.
How should i make my entity take 'Weblogic' as CMP provider for my beans using JDeveloper. I have my tables in Oracle personal db. I was able to succesfuly add a Weblogic/Db connection under respective connections node.
Should i need to do something more so that i am given an option of choosing Weblogic as CMP provider.
thanks for the advance help
regds
srikanth

Currently there is no specific option for WebLogic CMP provider.
You need to manually add the WebLogic CMP deployment descriptor to the project containing
EJB Entity beans and deploy to WebLogic.
raghu
JDev Team

How to make common database connection using bean, etc.

anyone know how to make a coomon database connection because on my web pages each of them need to connect on the database for their specific objectives... please help
regards
blingbling
Edited by: BlingBling15 on Oct 22, 2007 1:16 PM

Making a 'common' connection and passing it around is a bad idea. And making a new connection on every page, as you seem to have already guessed, also involves an overhead that you can do without.
Like drvijayj2k2 has mentioned, you should use connection pooling.
Take a look at the Apache Commons DBCP [1] and it's examples [2].
[1] http://commons.apache.org/dbcp/
[2] http://wiki.apache.org/jakarta-commons/DBCP
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

How to make new database connection using Oracle BI Interactive Dashboards

Hi,
I install Oracle BI Intelligence on my system.
I am using Oracle BI Interactive Dashboard. Here we have default database connection.
but now i want to use it for my own database. Can any body give me guideline how to
make a new data base connection using this s/w or how to connect to my database so
that i can make my own reports.
I am using
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/saw/saw.html
this link.
i make odbc connection which is fine.
but
Restoring the Business Intelligence Presentation Catalog and Updating Metadata
The third point blow above heading is not clear.
Thanks

Umesh - in order to build Answers and Dashboard content you must first setup a Physical model, then a Business model, followed by a Presentation Catalog/Subject Area.
All these tasks are carried out using the Repository Administration Utility.
1) Import your physical tables using OCI/ODBC into the physical layer.
2) Build your model
3) Deploy
Then you're ready to start building answers/dashboards.
Good Luck.

Database connections in JDeveloper 10g

I love the integrated database browsing of JDeveloper, but there is one problem with it. When creating new connections you have to supply the user name and password. For security reasons this is not always recommended. It would be better if JDeveloper could prompt me for the user name and password when I try to open a connection. It used to be like this in earlier versions of JDeveloper I think. At least this should happen if no password is stored with the connection. Where security is not a concern I can store a default user name and password for a connection, but it should always be possible to override it. The user name as well so I don't have to create a connection for each user in each database.

I logged an er (3649694) to track this request. Thanks for the feedback!
-- Brian

How to Create Application Server Connection in Jdev 10g?

I have Jboss 4.0.x installed on my system and working fine. How I can import the connection to JDev application server?
Thanks
Mit

Mit,
No need to import the connection. Just create a connection for Application Server.
step-1 : Go to VIEW > DATABASE CONNECTION NAVIGATOR
step-2 : Right click on APPLICATION SERVER
step-3 : Select New Connectionn from the context menu.
step-4 : Enter the Details
--Neelmani Jaiswal
(Madhav, Hayaghat)
Edited by: Neelmani Jaiswal on Feb 3, 2009 8:44 AM
Edited by: Neelmani Jaiswal on Feb 3, 2009 8:45 AM

How to disconnect the database connection using crystal report

Post Author: cp_pramodu
CA Forum: Crystal Reports
Hi All,
We have developed an application using .Net and Crystal Reports 10 for generating Adhoc reports from Business system (db sybase 12). We are using the below mentioned script for opening rpt files.
Try
       ReportDocument1.Load(sReportName)
       For Each table In ReportDocument1.Database.Tables
              ' Get the TableLogOnInfo object.
              logonInfo = table.LogOnInfo
              ' Set the server or ODBC data source name, database name,
              ' user ID, and password.
              logonInfo.ConnectionInfo.ServerName = sReportServerName
              logonInfo.ConnectionInfo.DatabaseName = DBName
              logonInfo.ConnectionInfo.UserID = UserName
              logonInfo.ConnectionInfo.Password = Password
              ' Apply the connection information to the table.
             table.ApplyLogOnInfo(logonInfo)
Next
'Me.Cursor = Cursors.WaitCursor
Me.CrystalReportViewer1.ReportSource = ReportDocument1
'Me.Cursor = Cursors.Default
Catch ex As Exception
'Response.Write(ex.Message)
Finally
Me.Cursor = Cursors.Default
'ReportDocument1.Close()
'ReportDocument1.Dispose()
End Try
Each time user opens the report a new connection is established to the database, can we disconnect the connection established from crystal reports, while closing crystal report. At the same time i want to setup an Idle time for these connections. In database level, i will not be able to set idle time in database level, as it affect our electronic channels.
Waiting for a reply.
Thanks & Regards,
Pramodu. C. P

Hi,
If you are reworking the application can you not build in the functionality to re-establish a connection if there is a failure? That is, a submission from the application server to the database server detects a failure, etc. and then re-establishes the connection. If you need a more frequent check than during a user-initiated roundtrip, you may be best served by using the "dummy query" technique on some time interval.
From my understanding using HA Event Notification would require a RAC database (plus a multi-threaded application and services correctly configured on the RAC-side).
In the documentation I see this:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14250/oci09adv.htm#sthref1495
"Applications must connect to a RAC instance to enable HA event notification."
In any case, this has the potential to be a bit complicated...
Regards,
Mark

How to check the database connection using OCI

I am working on enhhancement of very old application developed using C and OCI. It has a background process which acts as a middleware for interaction of any other front end process with oracle database. Any processes, which needs to interact with database sends a request to background peocess and then it will execute a call to execute the stored procedures for performing requested operation (like select, update, insert) on table and will send the result back to respective process. So this process has to be always running in background and connected to branch database.
If branch database gets restarted or connection gets dropped due to some ad-hoc problem then the background process also has to be restarted manually. Because this process establishes the connection to branch database only once on start up and it does not have the intelligence to reconnect automatically in such scenario.
I am looking forward to build the intelligence in this process to automatically reconnect if connection with branch database is lost. But I am not familer with OCI, and I am not sure if there is any OCI call which can determine if my earlier connection is still available. Can any one please tell me if there is any other way to check the connection other than the execution of dummy query, then check if it gets executed properly and then do the actual query.
Thanks in advance,
Deeapk

Hi,
If you are reworking the application can you not build in the functionality to re-establish a connection if there is a failure? That is, a submission from the application server to the database server detects a failure, etc. and then re-establishes the connection. If you need a more frequent check than during a user-initiated roundtrip, you may be best served by using the "dummy query" technique on some time interval.
From my understanding using HA Event Notification would require a RAC database (plus a multi-threaded application and services correctly configured on the RAC-side).
In the documentation I see this:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14250/oci09adv.htm#sthref1495
"Applications must connect to a RAC instance to enable HA event notification."
In any case, this has the potential to be a bit complicated...
Regards,
Mark

How to create database connection using DB2Driver in JDeveloper 10.1.2.1.0?

I am trying to create a JDeveloper/Data Connection using com.oracle.ias.jdbc.db2.DB2Driver. The driver is registered from a User Libraries: DataDirect JDBC. I have the following class path for the library:
E:\DataDirect\3.4\lib\YMdb2.jar;E:\DataDirect\3.4\lib\YMbase.jar;E:\DataDirect\3.4\lib\YMutil.jar
I have no trouble configuring the connection but when I test it and I got No suitable driver Vendor code 0. Whats wrong? I have successfully created several database connections using Oracle thin driver. This is first time I am using a third party driver. Has any one successfully create a database connection using the com.oracle.ias.jdbc.db2.DB2Driver?

Hi
Since the error points to the unavailability of the driver class,can you double check your library claspath entries again.
I just tried a DB2 connection using the following properties and the connection went through fine:
Driver class name: com.oracle.ias.jdbc.db2.DB2Driver
URL: jdbc:merant:db2://<host_name>:50000;DatabaseName=SAMPLE
Thanks
Prasanth

How do I generate XML File Using JDeveloper 9.0.3

Hi All
I want to generate a XML file against the data in one of my Oracle table,,,, This is the first time I am doing this Task, so please let me know whether I am going through the correct path, or if not appreciate if you could put me to the correct system of doing this please��..
OK , Well I am working to a publishing company in Australia and we have Oracle 8i (Release 3 ) database and I have Oracle JDeveloper (9.0.3 -Preview ) version in my personal computer.
I have a Table(ONIXT4) with three Columns( ISBN,Author,Price) in Oracle as follows:
ISBN     Author     Price
2512456321     Peter     14.50
7445854127     Ray      21.75
What I want to generate a XML File using JDeveloper as below with respect to data in above Table.
<ISBN>2512456321</ISBN>
<ProductInfor>
<Author>Peter</Author>
<Price>14.50</Price>
</ProductInfor>
<ISBN>7445854127</ISBN>
<ProductInfor>
<Author> Ray </Author>
<Price>21.75</Price>
</ProductInfor>
I created the database connection within JDeveloper to Oracle those working fine,, my major problem is,, the Tag <ProductInfor>, since this is not a Column Name of the Table I don't know how should I incorporate this with the file.
What I did so far with the JDeveloper:
1.Create the Workspace and the Project
2.File -- New -- XML -- XSQL
3.Then I Selected Query from the Component Palette,, Property Values were NOT changed, and gave 'Select * from ONIXT4'
Whole Untitled3.xsql file look likes below
<?xml version = '1.0' encoding = 'windows-1252'?>

<page xmlns:xsql="urn:oracle-xsql" connection="Connection1">
<xsql:query max-rows="-1" null-indicator="no" tag-case="lower">
Select * From OnixT4
</xsql:query>
</page>
Then the Result comes as:
<?xml version="1.0" encoding="windows-1252" ?>
- 
- <page>
- <rowset>
- <row num="1">
<isbn>2512456321</isbn>
<author>Peter</author>
<price>14.5</price>
</row>
- <row num="2">
<isbn>7445854127</isbn>
<author>Ray</author>
<price>21.75</price>
</row>
</rowset>
</page>
How do I format the outcome to obtain the my requirement??
Welcome all comments of donig this ....

To format your XML to the requiered output you'll use a stylesheet and XSLT
As it says in your output:
- 
A nice tutorial on XSLT is available on the XML technology center in OTN:
See Transforming XML with XSLT
http://otn.oracle.com/tech/xml/learner.html

Exception while creating a DataBase Connection (Unix)

Hello Friends,
I am Trying to create a DataBase Connection using OCI in java on UNIX Platform, but it gives an error message:
Exception in thread "main" java.lang.UnsatisfiedLinkError: no ocijdbc9 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1542)
at java.lang.Runtime.loadLibrary0(Runtime.java:795)
at java.lang.System.loadLibrary(System.java:834)
at oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.java)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at TestDBConn.<init>(TestDBConn.java:16)
at TestDBConn.main(TestDBConn.java:35)
I have also checked my environment variables which seems to be correct, just have a look:
$ echo $ORACLE_HOME
/oratest/ora/proddb/9.2.0
$ echo $CLASSPATH
/oratest/ora/proddb/9.2.0/jdbc/lib
$ echo $LD_LIBRARY_PATH
/oratest/ora/proddb/9.2.0/lib
Please help in solving this problem...
Thanks in Avance,
Ankur

Yes dear there three file under LD_LIBRARY_PATH:
1. libocijdbc9.a
2. libocijdbc9.sl
3. libocijdbcst9.a
Please provide me the solution...
Regards,
Ankur

Database Connections in Jdeveloper

Hi,
I was able to make a successful jdbc to odbc database connection using Jdeveloper 10.1.3.0.2. I could see the list of tables in the Oracle database. However, release 10.1.3.0.4 produces the following message: "Invalid Fetch Size". I also tried a straight jdbc connection in the later release, and it returns a certain amount of metadata, but no list of tables. Why does the connection work for the earlier release but not the later release?
Thank you,
Roland Wales

I logged an er (3649694) to track this request. Thanks for the feedback!
-- Brian

BI Publisher creating two database connection for scheduler configurations

Hi ,
please tell me how to create two database connection for scheduler configurations in BI Publisher
ADMIN -> scheduler configurations
Kind Regards,
Mohan

Hi Saichand,
thank you for your Kind reply !!!!
Already i configured the scheduler configuration(DB) details for project1.Now i want to configure one more scheduler configuration(DB) for project2.
i want to maintain two scheduler config details for two DB.
Kind regards,
Mohan

How to create a database connection using Jdeveloper 10g

Similar Messages

Maybe you are looking for